Print delivery address in a Purchase Order

Hello,
Could you please tell me, what I should to do for print delivery address in a purchase order?
I need to configure or activate these fields: Name y Street/House number in the PO printed
Thanks!!
Best Regards,
Mariela

the delivery adress is storage location address, if storage location has an address and is entered in the PO.
the delivery adress is plant address, if no storage location is entered in the PO or the storage location does not have an address.
or the delivery address is taken directly from POs delivery adress at item detail if maintained manually there.
If it does not print, then you may use a customized form which is not prepared to print the address.
If that is the case, then contact the developer of the form.

Similar Messages

Address no. in delivery address tab of purchase order

I want to know where is delivery address maintained. I am creating a po with item category K.
I want to change the delivery address. When I save po. it gives address no. in delivery address tab of purchase order.
I want to know what is the tcode for maintaing address.
Is this customisation or master data maintenance.

Hi,
I am working on CR in which I need to change the delivery address.
The purchase order I am referrring is having account assignment category K, without material no. & storage location.
Plants and storage locations have addresses in the system.
With what respect we will maintain address in tcode MEAN.For example plant. ?????
Because in MEAN I create address and save but how this address will pick up in PO.
Edited by: KiranCG on Dec 8, 2011 7:41 AM

How I can find the Delivery address changes in purchase order

Hi Friends,
How I can find the Delivery address changes in purchase order
item details.And how i can find who did ths changes.

Hi,
Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes.

Required Delivery address in a Purchase Order

Hi All,
In purchase order at item level "DELIVERY ADDRESS" is mandatory. We do this in the customizing : SPRO ->MM->Purchasing->Purchase Order->Define Scree Layout at Document Level .
But during the creation of a PO when we enter an address the system generates an error : ME 083 : Please enter an address
We don't find OSS notes.
Thanks for your reply
Sam

Thanks for your answer.
I followed your explanation, but I always have the same message.
We use ECC 6.0.
Thanks a lot.
Sam

Use of Address field in Delivery Address tab of Purchase Order

Hi,
In Purchase Order, there is field Address in Delivery Address tab.
How can we maintain Address in SAP.
Also in what scenario we use the Address.
My understanding is:
We have marinated the Plant Address as Sec-59, Gurgaon and while creating the Purchase Order, the System picks up the same address as mentioned in the Plant Configuration. Now we to deliver the Material in , say, Sec 69 in Gurgaon, in this case the concept of Address is used.
Please correct/ confirm my understanding
Regards,

Hi,
Thanks for the reply.
I have created the address and is working fine.
Here we have got some confusing scenario:
We have created a Company Code 1000 & Plants 1001 (in Delhi) & 1002 (in Mumbai) under Company Code 1000.
We (our client) want to create purchase Order from Plant 1001 (Delhi) but we the Material to be delivered to Plant 1002 (Mumbai). Is this possible? To be my knowledge, the Material is received in the Plant from where the Purchase Order is being generated. Also there will a Tax related problems.
What can we suggest to convince the Client?
Regards,

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

In MIGO, i need to see delivery dates from the purchase order

Is there a way to see in transaction MIGO, the delivery dates from the purchase order? I hope there is some exit or BADI or BAPI or .... to perform this copy function?
We have multi-line POs for the same material with staggered delivery dates and the Warehouse needs to know which PO line to receive against.

when you enter the PO number in MIGO and hit enter, then you only get the items that can be received.
If you make sure that the PO items are created by ascending delivery date, then you can always take the first.
if you have the personal setting to display all items (even the already received ones), then you can take the first with a quantity proposal. already received items do not propose quantities.
I would ask purchasing to tell the vendor that he has to state the PO number along with the item number in all papers (delivery note, invoice).

Function module to create Inbound delivery with reference to Purchase Order

Hi experts,
I want to create Inbound delivery with refernce to Purchase Order. But I want to create item wise. For example If one purchase order is there with 10 line items. 10, 20, 30, 40, 50......100.
If I am showing report for Purchase Order with select option and if I select first 5 line items 10, 20, 30, 40, 50 then my program should be create one Inbound delivery for selected line items only. I have tried BDC for Tcode VL31N, but its not worked. Is there any Function module to create Inbound delivery with reference to Purchase Order for selected line items????????

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

How to Configure Invoice Address tab on Purchase Order - Header Level

Hi Gurus
Please assist
My client want to add the Invoice address on the Purchase Order level Tab, it must be automatically pull through to all the Purchase Orders as they have one Invoicing address.
Currently the suppliers send invoices to plants instead of HEAD OFFICE for payment
Regards
Susan

Hi,
Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
you can have these condtions in KONV table.
In item level vbrp-posnr = konv-kposn.
ekpo-ebelp = konv-kposn
at header level as said in the below thread
Just see this and get back if any concerns
Regards
Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

"Delivery Completed" Indicator in Purchase Order

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,

Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator

No delivery costs exist for purchase order

Dear Friends,
While doing MIRO, i am getting an error message as mentioned below----
"No delivery costs exist for purchase order xxxxxxxxx"
Message no. M8014.
Kindly guide me in resolving the error.
Thanks & Regards,

hi
>"No delivery costs exist for purchase order xxxxxxxxx"
itself says that there is no delivery cost,
firstly check ur PO ,Did u entere the delivery cost conditions like for freight or octoi in the PO
or if u have entered the condition then check if it is not already invoiced
if u dont have delivery cost in po and wanna do IV for material then in miro
change the option of delivery cost to goods/service
(at right side of the po no field)
regards
kunal

BDC/BAPI for set delivery cmlition indicator in purchase order @ item level

Hi Expert,
could you please suggest me bapi to set/reset delivery completion indicator in purchase order at item level for t-code "ME22n"?
Thanks and regard,
Santosh Gupta

Use BAPI_PO_CHANGE to set the delivery completed indicator.
Refer to table section in the BAPI Interface
POITEM LIKE BAPIMEPOITEM
POITEMX LIKE BAPIMEPOITEMX
Set Field POITEM-NO_MORE_GR = 'X' & Set field POITEMX-NO_MORE_GR = 'X'

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

Bapi to post planned delivery cost of a purchase order

Hi every body,
         Can anybody please give me the full details of the planned delivery cost data
to post with BAPI_INCOMINGINVOICE_CREATE
what are the manditory fields,
I am using the following code , but a few are posting , remaining r not posting
but when I post the same through MIRO it is posted what is difference
this error was came
ERROR: enter good reciept data only when working with GR-based IV
REPORT ZBAPI_MIRO                              .
tables: ekko,ekbe,ekpo,lfa1,EKBZ,t000.
data: itemdata like BAPI_INCINV_CREATE_ITEM occurs 0 with header line,
headerdata like BAPI_INCINV_CREATE_HEADER occurs 0 with header line,
     return like BAPIRET2 occurs 0 with header line,
     DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
     FISC_YEAR LIKE BAPI_INCINV_FLD-FISC_YEAR.
DATA:error_flag.
data: item_data like EK08BN occurs 0 with header line.
data: begin of itab occurs 0,
             p_order like ekpo-ebeln,
             p_item like ekpo-ebelp,
             p_ctype like konv-kschl,
             p_lifnr like lfa1-lifnr,
      end of itab.
data: order(10) type N,
      vendor(10) type N.
data: begin of it_doc occurs 0,
            DOC_NO LIKE BAPI_INCINV_FLD-INV_DOC_NO,
            p_order like ekko-ebeln,
      end of it_doc.
PARAMETERS: fn LIKE rlgrap-filename OBLIGATORY.
DATA: FN1 TYPE STRING,
     l .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR fn. "p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            field_name = 'FN'
       IMPORTING
            file_name = fn.
START-OF-SELECTION.
   FN1 = FN.
PERFORM upload.
loop at itab.
CLEAR: EKBZ,EKPO,LFA1,ITEM_DATA,HEADERDATA,itemdata.
REFRESH:itemdata,HEADERDATA,ITEM_DATA.
order = itab-p_order.
itab-p_order = order.
vendor = itab-P_lifnr.
itab-p_lifnr = vendor.
select single * from ekbz where ebeln = order
                           and ebelp = itab-p_item
                          and kschl = itab-p_ctype
                          and bewtp = 'F'.
select single * from ekpo where ebeln = order
                       and ebelp = itab-p_item.
SELECT SINGLE * FROM LFA1 WHERE LIFNR = vendor.
clear: item_data.
refresh:item_data.
call function 'ME_READ_COND_INVOICE'
   exporting
   I_BUDAT            =
    I_EBELN            = itab-p_order
    I_EBELP            = itab-p_item
   I_FRBNR            = ' '
     i_lifnr            = ' '
   I_XBLNR            = ' '
   RE_KURSF           =
   RE_WAERS           =
   I_RESWK            = ' '
   I_EKKI             = 'X'
   I_BUBIS            =
   RE_WWERT           =
   XEK08B_FLAG        =
   I_BELNR            =
   I_BUZEI            =
   I_READ_KRUEK       = ' '
   I_DISPLAY          = ' '
TABLES
    XEK08BN            = item_data
   XEK08BN_CURR       =
read table item_data with key kschl = itab-P_ctype.
headerdata-INVOICE_IND = 'X'.
headerdata-DOC_TYPE = 'KR'.
headerdata-DOC_DATE = ekbz-budat.
headerdata-PSTNG_DATE = SY-DATUM.
headerdata-REF_DOC_NO = itab-P_ORDER.
headerdata-COMP_CODE = 'HPL'.
headerdata-DIFF_INV = itab-p_lifnr.
headerdata-CURRENCY_ISO = ekbz-waers.
headerdata-GROSS_AMOUNT = item_data-WEWWR - item_data-AREWR .
headerdata-BLINE_DATE = SY-DATUM.
headerdata-DEL_COSTS_TAXC = 'V0'.
headerdata-PO_REF_NO = itab-P_ORDER.
headerdata-bus_area = 'OTHR'.
headerdata-ITEM_TEXT = LFA1-NAME1.
*headerdata-HEADER_TXT = .
headerdata-ALLOC_NMBR = itab-P_ORDER.
APPEND HEADERDATA.
CLEAR HEADERDATA.
itemdata-INVOICE_DOC_ITEM = '00001' .
itemdata-PO_NUMBER = itab-P_ORDER.
itemdata-PO_ITEM = itab-P_ITEM.
*itemdata-REF_DOC = ekbz-belnr.
itemdata-REF_DOC_YEAR = ekbz-gjahr.
itemdata-REF_DOC_IT = itab-P_ITEM.
itemdata-TAX_CODE = 'V0'.
itemdata-ITEM_AMOUNT = item_data-WEWWR - item_data-AREWR .
itemdata-QUANTITY = item_data-BPWEM - item_data-BPREM .
itemdata-PO_UNIT = ekpo-meins.
itemdata-PO_PR_UOM = ekpo-meins.
itemdata-COND_TYPE = itab-P_CTYPE.
*itemdata-ITEM_TEXT = .
append itemdata.
clear itemdata.
CALL FUNCTION 'BAPI_INCOMINGINVOICE_CREATE'
EXPORTING
    HEADERDATA       = HEADERDATA
IMPORTING
    INVOICEDOCNUMBER = DOC_NO
    FISCALYEAR       = FISC_YEAR
TABLES
    ITEMDATA         = ITEMDATA
   ACCOUNTINGDATA   = I_ACCOUNTINGDATA
   TAXDATA          = I_TAX
    RETURN           = RETURN.
if sy-subrc <> 0.
message e999(re) with 'Problem occured'.
else.
loop at return.
    if not return is initial.
     clear bapi_retn_info.
     move-corresponding return to bapi_retn_info.
      if return-type = 'A' or return-type = 'E'.
        error_flag = 'X'.
      endif.
     append bapi_retn_info.
    endif.
endloop.
if error_flag = 'X'.
   message e999(re) with 'Problem occured'.
    rollback work.
else.
      Return Table from BAPI call is empty
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = 'X'
      IMPORTING
        RETURN = RETURN.
endif.
endif.
       write:/ 'Document no :', doc_no.
       it_doc-doc_no = doc_no.
       it_doc-p_order = itab-p_order.
       append it_doc.
       CLEAR IT_DOC.
endloop.
loop at it_doc.
   if it_doc-doc_no = ' '.
      write:/ 'purchase order not posted ' , it_doc-p_order.
   else.
   write:/ 'document no:' , it_doc-doc_no, 'p.order:' , it_doc-p_order.
endif.
endloop.
*&      Form upload
      text
--> p1        text
<-- p2        text
form upload .
CALL function 'GUI_UPLOAD'
exporting
    filename                      = FN1
   FILETYPE                      = 'ASC'
HAS_FIELD_SEPARATOR           = ' '
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = ITAB
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
endform.                    " upload

I think you need to implement user-exit EXIT_SAPMM06E_012 of enhancement MM06E005.
Look in OSS with seach term MM06E005 to get some examples.
Note310154 "ME21N/ME51N: Customer-specific check, generating error log" has some examples.
You should use the macros to set errors/warnings
Example:
mmpur_business_obj_id pt_ekpo-id.
mmpur_metafield mmmfd_partners.
mmpur_message_forced 'W' '00' '208' text-001 '' '' ''.
regards,
JG

Print delivery address in a Purchase Order

Similar Messages

Maybe you are looking for