Print Determination MIGO

Hi All
what is the difference between WE01,WE02,WE03,WA01 and so on.. what is the settings i need to make if i forget to take printout during GR. Is there anyother setting other than MB02 & MB90.
Please Suggest
Regards
Jagadish

Hi
WA for Goods Issue
WE for Goods receipt
1 is for Individual slip
2 is for individual slip with inspection text
3 is for collective slip.
After you make nessary settings in NACE for this requirement, while in MIGO screen you have to select either of 1,2 or 3 and flsg the Print via Out put indicator beside this selection list.
If you forget to do this you can do this in disply mode also or you can alos do the repeat out put.
regards,
MRao

Similar Messages

Print for MIGO

Hi,
we have got the ZWE1message type for material document printing(MIGO).This material document is printed automatically when MIGO is posted.
When the service entry sheet is created Acceptance material document(GR) document is created apart from the service entry sheet creation.
But problem is that when the Service entry sheet is posted, automatically acceptance GR document of that service entry sheet is printing automatically.
1) How to stop this printing of Acceptance material document created with service entry sheet.
2) At the same time mat documents created through MIGO should be printed automatically,there should not be any problem
3) These prints created by service entry sheets(User is different) are printed at the printer of the User where Goods reciepts can be done(MIGO).
4) Configuration is done in printer determination,for plant/storage location -printer is assigned for the ZWE1,
5) I have selected the option,instead of storage location/plant"out type user" is selected in ZWE1 message typeDetails option.
Under printer determination ,i have assigned the user id to printer, Even though, when i post the MIGO or Serive entry sheet the print is coming for the previous printer.
Please suggest,what needs to be to be to avoid printing of Acceptance Material doc of service entry sheet.
Regards,
Cheruku.Dayanand
Please suggest what needs to be done.
Regards,
Cheruku

Dear Gopala,
From where the service entry acceptance material documents are getting,there is no default printer set in SU3,even though print is getting in the warehouse printer where the default printer is set for the ZWE1 message type.
Under printer determination/plant/storage location,default printer is set for the ZWE1 message type.so prints for the service entry acceptance material documents also getting to the same printer.
How to avoid this prints from the service entry acceptance material documents .
Please suggest.
Regards,
Dayanand

Group Policy for "let printer determine color" in Adobe Reader X

I need to make a group policy to activate the "let printer determine color" for a huge group of users/pcs, as the reader prints the wrong colors now.
It only needs to activate this single thing. The pcs are running Adobe Reader 10.1.0. Can anyone please help me?

Do you have the Enterprise Deployment documentation for Acrobat/Reader?

Output Print for MIGO movement type-107.

Hi All kindly help me in resolving the following issues:-
There is the requirement of printing RF Label while saving the GR from PO in movement type-107.
Help me to configure the output type in this case.
How the data flows from MIGO transaction to the ABAP program and finally to the printer ?
How to link the output type to the transaction MIGO and so in movement type-107 ?

Hi,
go to spro-Materials Management-Inventory Management and Physical Inventory-General Settings.
in General Settings print version migo is 2 .execute after Maintain Print Indicator for Goods Receipt Documents check 107 mvt type.
refer the below link
Print material document (WE02) automatic when GR
Regards
Raj.

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

Purchase Order Printer Determination

We would like to printout POs using criterias as Plant and St.Location.The reason is that we have to printout PO in different branches of the Company.There is an option to have printer determination using criterias on header level, but on item level .... we don't know.
Please help !

Thank you everybody ! We will refuse to change standart functionality.

Registry key for the setting "Let printer determine colors"

Hi,
We have a Citrix environment with several Terminal servers. When people print PDF through Adobe Reader. We get the error message "Let printer determine colors".
Then we have to select "Let printer determine colors" to allow Xerox printer to do the color handling.
Is there a registry key or something I can do to alway let the Let printer determine colors?
So that the users won`t be bugged with this message everytime?
Regards Tom Ruben

There are some docs that document all Reader settings, but these are rather difficult to navigate. I do not even want to go and look for them now.
If I have an issue like yours (need to know the registry equivalent for a certain Reader setting) I use Regshot: take a registry shot before and after the update, then compare what's changed.

Let the printer determine colors in Acrobat 8

Hi,
I am trying to figure out how to let the printer (post script) determine the colors when printing in Acrobat 8. I have read in the user guide that I can configure Acrobat to allow the printer to determine the colors, I just haven't figured out how. Below is a clip from the user guide.
"Letting the printer determine colors when printing
In this workflow, the application does no color conversion, but sends all necessary conversion information to the
output device. This method is especially convenient when printing to inkjet photo printers, because each combi
nation of paper type, printing resolution, and additional printing parameters (such as high-speed printing) requires
a different profile. Most new inkjet photo printers come with fairly accurate profiles built into the driver, so letting
the printer select the right profile saves time and alleviates mistakes. This method is also recommended if you are
not familiar with color management.
If you choose this method, it is very important that you set up printing options and turn on color management in
your printer driver. Search Help for additional instructions."
I have changed the color output in the print driver and I would like those settings to be applied when printing from Acrobat.
Thanks!

For PostScript printers (as opposed to PCL printers or raster printers with proprietary formats), Acrobat always generates the output (i.e., the PostScript) and passes that through the driver. The PostScript driver in fact doesn't generate or affect the generated PostScript except for certain device options such as tray and paper size selection, duplexing, etc. The color options of the PostScript driver are effectively ignored.
Also, in general, Adobe strongly recommends against the let printer determine color option. Beginning with Acrobat 9, the default is the Acrobat Color Management option. (Due to transparency flattening and other considerations, all color management and conversion to device colors, CMYK, should be done within Acrobat by the print process and not at the PostScript printer!)
- Dov

How to set ID CS6 to "Let Printer Determine Colors"

Hi,
Trying to print from ID CS6 to an Epson WorkForce InkJet on OS X.
I want to have the Printer Driver manage the colors.
However, in the print dialog in ID, I can only select "Let InDesign Determine Colors"
How can I change this so it set to "Let Printer Determine Colors"?
Thank you!

Could it be confirmed by someone with Postscript device connected?
Photoshop is different, you are printing a single bitmap image, while an InDesign page can have many different kinds of objects.
iProof's PowerRIP vs. Epson's driver. FWIW I gave up on Epson's driver years ago mostly because the variables in the driver's Printer... dialog, that affect color were overwhelming

Printer determination

Hello All,
I have problem defaulting the printer for adobe forms.
1. I defined "Define Techn. Medium for Msgs (PPF Actions) f. Cust. Shipm. and Cust. Decl." . The process type as " External communication" and Form type = PDF based forms.
2. In "Define Conditions and Output Parameters for Comm. of Cust.Shipm. & Cust.Dcl", I activated the action defintion in that profile.
3. I gave nothing in the printer.
4. As usual The rest of the config I did.
5. I would like the system to derive from "Printer determination" . So I defined the printer for this message in "Printer determination".
In the communication tab of customs documetn, The message comes up with "No printer defined"
My question is why the system is not taking from "Printer determination".
what I observed is there is flag "Printer deter" in "Define Conditions and Output Parameters for Comm. of Cust.Shipm. & Cust.Dcl", printer area.
But that is disabled. Can anybody give me some idea on how to control the "Printer determ" flag. I tried so many things but no luck.
Thanks...

Hi
In order to get the grayed out box to be active you have to Implement BAdi PRINTER_DETERM_PPF BAdI. You have to add filter instances to be used for printer determination. You have to enter the technical names of the action definitions as filter .either you can put the actual Action name or also enter the first part of the name and use * as wildcard. For example, cans GTS* and then u can use Action with name GTS_PRN or GTS_SLL_PRN . By using the filter value, you can control the actions for which printer determination is performed.
If you additionally enter a fixed printer in configuration dynamic printer determination is no longer performed. So if you want Dynamic printer to work do not enter any printer in Configuration .
you have to code the method GET_PRINTER_DATA method. Here you can enter the source code that returns the relevant printer.
If you want to return the printer defined for the user master data, copy the source code of the PRINTER_DET_SUSR_PPF BAdI implementation and enter it into your implementation.
This implementaion will be availabe out of Box.
Kind Regards,
Sameer

Not able to print in MIGO

Hi Gurus,
Not able to print in MIGO transaction for the printer. Able to print all other transactions for the particular printer in SAP.
Need your expertise to solve this issue.
Thanks and regards
Durai

Are you checking (ticking) the Print check box while doing MIGO? If no, you cannot print.
If yes, are the output types configured? Do you get the output type in the material document? If no, try adding it manually.
If yes, will need more info to resolve your issue.
Lakshman

Wishlist: 'Let printer determine colors' switch on commandline

Hello,
I use acroread to convert PDFs that mainly contain G4-compressed TIFFs using the -toPostscript option from commandline. Starting with Acrobat Reader 8 this became a very slow process which takes several minutes for PDFs containing about 150 pages. I found out that if I activate the 'Let printer determine colors' in the printing dialog of the GUI printing the same file just takes a few seconds. What about implementing a possibility to activate this setting from commandline, too?
Kai

Edit>Preferences (Win) Adobe Reader>Preferences (Mac)

Let printer determine colors

PDFs were printing very slowly on an HP Color Laserjet 2550L.
I read online to turn on Let printer determine colors, which I did, and the printing speed increased.
While printing out a 20 page document with a blue background, the printer suddenly starting printing the background as red on pages 5 - 20.
To fix this I went to File Print Adavanced, turned off the Let printer determine colors. and printed the document. It printed perfectly, if a bit slow.
However each time I want to print this document I have to turn off Let printer determine colors. The real problem is what if it does this to other documents.
How can I change the default to not be Let printer determine colors? I could not find it in the printer properties.
Thank you.
Kevin

Edit>Preferences (Win) Adobe Reader>Preferences (Mac)

Printer determination per user

Hi,
I am facing a problem. The problem is that i want to determine a printer per user in SD.
I checked the "Output Determination" section but the output determination using the condition technique it is not suitable for my purpose.
I used the transaction OMJR "printer determination per user" that in spite of it is located in material management allow to use aplication V3 (sales)...but even this way it is not working...
Can someone give me any suggestion??
Best Regards
João Fernandes

Try this.
<b>"hi senthil,
u can go to trx SU3 and for the user in the Defaults TAB Spool Control->Output Device u can give the Printer name.
Defualt printer assigned to the user will be stored in the table field USR01-SPLD
Hope this helps
Cheers
Alfred"</b>

Printer determination in material labelling MIGO 101 movement

Hello,
I'm trying to set a different printer to label the materials on 101 movement...
I already made all the settings (I guess... NACE, MN23, OMBR, OMB3, ...) but still I get a pop up window when printing (MB90) asking me what printer to use... I even set the default sap printer (SU3) to that specific printer, and also the default printer of my windows XP scheme...
Does anybody have a guess on this issue? Does this as anything to do with this specific printer that is bar code creator? If I print another message... which prints in a regular printer the pop up message does not appear.
Thanks in advance,
Gonçalo Garcia.
Points for any helpful answer!

Hi
Please try to assign printer in OMJR transaction and check how it goes.
regards
Srinivas

Print Determination MIGO

Similar Messages

Maybe you are looking for