Print Dialog box has changed along with printing function

I installed the latest update and now when I print there is a new dialog box. The problem is on a multi page job it only pulls a few pages from the paper tray and then makes me use the manual feeder for the remaing pages, All paper sizes of the print job are the same and I only have one tray. I am printing on a Brother MFC 4860N. Any solutions? Thanks

Carolyn -
Thank you for your respose of 5/1/09 -- sorry for the delay in getting back to you.
1.) I tried your suggestion, but the problem is that Apple and HP have worked to include all/most of the HP software into OS X v. 10.4.11 and beyond. I did not find in my user/.../Library/Preferences .plist files directly referencing my HP 990 Cse printer, which was the only printer not displaying the Printer Dialogue Box.
Open your User/..../Library/Preferences to see the list of .plist files for HP and other manufacturers.
The open the [top level] your-hard-drive/library/Printers/HP to see the [root=basic] files which, I believe, are the actual OS X system files which are on the original System CD or are downloaded for the updates.
2.) I finally got the Printer Dialogue Box for the HP 990 Cse to work --
a.) I ran the OS X Printer Setup Utility app.
b.) I then dragged the icon for the HP 990 Cse printer to the trash; and emptied the trasn.
c.) Restarted the OS X.
d.) Ran the OS X Printer Setup Utillity app again
e.) When the HP 990 Cse did not appear in the list of printers I clicked the "Add" icon.
f.) I selected to add the HP 990 to the Printer List
g.) Nothing happened when I tried to access the HP 990 Printer Dialogue Box.
h.) I did a restart.
i.) I then did a print job using the HP 990.
j.) When the HP 990 icon appeared at the right end of the dock, next to the trash, I grabbed it and dragged it to the place in the dock where I wanted it to reside.
IT WORKS JUST GREAT NOW !!!!
Thanks for your help, as you helped me consider the problem at a deeper level.
Samuel

Similar Messages

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Hi Sara,
The problem is every time I try to copy a page from a website or attachment sent to me or anything that I don't create, the dialog box says I have to save it before I can print -- there are no other options on the dialog box. Very frustrating -- one of the girls in my office is having the same problem and we can't find a way around it.
Hope you can help
Thanks
Carol Laskos
"Sara.Forsberg" <[email protected]> wrote:
Sara.Forsberg created the discussion
"Where do I find the printer dialog box to change the setting that asks me to save a file before printing"
To view the discussion, visit: https://forums.adobe.com/message/7070517#7070517
>

Adobe X no print dialog box and program closes when printing

Have one user who started encountering this problem today:
Opens up PDF
Clicks on the Print icon (or File - Print)
The Print Dialog box never appears
Adobe 10.1.1 program then immediately closes - nothing in the event log
Able to get the PDF to print only if right clicking on the file and selecting Print (but don't get to select any Printing options)
Have tried selecting a different printer with the same results
Have uninstalled and reinstalled the program
Any help is appreciated

iammrbojangles wrote:
I have a similar problem with the the same printer. Excel works fine until you ask to print preview, this takes about a minute to appear, and about another minute if you ask it to print too. Once you've printed and are back in Excel anything you try to do now has a delay. I've tried then changing the printer i want to use to a networked one which makes Excel return to it's normal self.
I've also tried sharing this printer to make sure it wasn't the PC but it is the same on any I've tried.

Supress Printer Dialog box (Operating System) in Payslip Printing

Hi All,
I have design the smartform to print the payslip. In the main window i have created the loop and then desing the templates to display the details of employee and the wage types.I have only one page in it. I have develop the print program to call the smartfform. But when i try to print the payslip for number of employees the printer dialog box (Operating system Level) is appearing for the number of times the employees i have selected.I am able to suppress the Print Preview dialog box from SAP it is not showing and i have given the parameters to print immediately.But the Problem i am facing is if i select 3 employees the printer dialog box is coming 3 times. i have to click 3 times to print the payslips .
Mustafa

Hi,
Please find the code below. I have made the changes but agian it is asking for the printer dialog box for the number of times the employees i have selected.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
   formname                 = 'ZHR_F_MMG_PAYSLIP'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = V_FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_payslip_details.
gv_control-no_dialog = 'X'.
gv_control-no_open   = 'X'.
gv_control-no_close = 'X'.
I_SSFCOMPOP-TDDEST = 'ZMMG_Print'.
I_SSFCOMPOP-TDNEWID = ''.
I_SSFCOMPOP-TDNOPREV = 'X'.
AT FIRST.
    gv_control-no_open = ''.
    endat.
    AT LAST.
      gv_control-no_close = ''.
      ENDAT.
CALL FUNCTION V_FM_NAME
EXPORTING
   CONTROL_PARAMETERS         = gv_control
   OUTPUT_OPTIONS             = I_SSFCOMPOP
TABLES
    I_PAYSLIP_DETAILS          = I_PAYSLIP_DETAILS
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.

Pages button in printer dialog box is deactivating while taking print ?

Hello exports,
while taking print abap reports (developed using smartforms) pages buttoon (from- to) in printer dialog box
is by default is deactivating .How to activate this button ? who will do this one (Abaper or basis guy).
pls help me in this.

Hi,
So, as you see a field "from ... to ...", I think you are talking about the "background print parameters" dialog (this is not the smart forms print dialog, which contains field "page selection").
I don't understand. "Pages from ... to ..." is always displayed, and the user can enter them manually. Do you want to enter pages programmatically?
What is your code or the steps to display this dialog? Is it fully standard or do you use GET_PRINT_PARAMETERS programmatically?
Sandra

My printer setting box has changed and photoshop keeps crashing when I open printer settings

My CS6 keeps crashing when I open printer settings, and the printer setting dialog window has changed

Possibly corrupt preferences.
Hold down Ctrl-alt-shift keys and start Photoshop. A dialog offering to delete the settings should appear. Answer "Yes".
cmd-alt-shift if that's a Mac.
Gene

How can i get rid of the print dialog box when using api to print an html file

i am using the systemshell.vi provided by labview the VI is working fine but it will open a dialog box for printer selection and properties. i would like to hide that dialog box and have it print to the default printer with the default properties

ShellExec is part of lvwutil and merely calls a function in Shell32.dll. There is nothing about the function call that controls the display of the printer dialog. I think that what shell32.dll does when it prints (just like right clicking on the file) is print the file according to what is defined about that file type in Windows Folder Options. On my Win2K system, the print application is defined as "C:\Program Files\Microsoft Office\Office\msohtmed.exe" /p %1. If I remove the /p, then Word starts up and in order to print, I get a printer dialog when choosing Print from the File menu. So it seems like the printer dialog is entirely dependant on the application that does the printing. I get no dialog when I use the VI to print a .txt file. I
nstead of using shell32, you might want to try some ActiveX method or property of an application like Internet Explorer that can open and print an html file.

LAN DNS resolution has changed - along with lots of other behaviours

Hi
Last Friday I experienced a lot of strange network/firewall behaviour on my Macs, both running 10.6.7. I don't know what the problem is but am trying to isolate it - or them.
Considering just the MacBook Pro, I have been running the same setup for over a year at different locations and never experienced this before. The MBP is named Isola, it runs Windows XP Pro on VMWare Fusion and MAMP as a development/test environment for websites.
Since I have had this setup, with MAMP running and using the normal Apache and MySQL ports I could connect to websites using Mac browsers on: http://localhost/, if I was testing on Windows browsers I would use http://isola/
This worked at home using an Airport connection over a Netgear modem/router:
TCP/IP
Using DHCP with manual address
IPv4: 192.168.0.5
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Configure IPv6: Automatically
DNS Servers: 192.168.0.1
Search Domains: -
It also worked at the office - 2 Macs networked using a Netgear Gigabit switch, also connected to the building's ethernet system for external internet connection:
TCP/IP
Using DHCP
IPv4: 10.0.21.10
Subnet Mask: 255.255.255.0
Router: 10.0.21.254
Configure IPv6: Automatically
DNS Servers: 10.0.21.254
Search Domains: popcorn
I have two Locations set up in networking preferences, Home and Office. DHCP and DNS at home are provided by my ISP I believe. Apparently the IT infrastructure in the building where my office is located handles the DHCP and DNS.
Since last Friday when I try to connect to http://isola/ using a Windows browser the request either times out (Internet Explorer) or is re-routed to http://www.isola.com (Firefox and some other browsers). In order to the site on my MAMP server I have to use http://isola.local/
I can replicate the same behaviour when trying to connect to the MAMP server using my Mac Pro.
I have flushed both Macs' DNS caches, repaired permissions and tried other stuff which I can't quite remember now. Nothing has made any difference.
I'd really like to know if this new behaviour is likely to be caused by my configuration or the office DNS setup and ideally get it back to what it was before.
Yesterday I started experiencing strange behaviour with the MBP firewall. It may be part of the problem or not - I'll include for information. It has always been on and set up normally - none of the Advanced settings checked. There were a whole load of software listed in the Advanced tab such as Skype, Safari, Opera configured to accept incoming connections. Yesterday for the first time ever I had a whole load of firewall dialogue boxes open on start up asking to allow or block network connections to basic OS X services: AppleFileServer, cups-lpd, cupsd, httpd, krb5kdc, mysqld, nmbd, smbd, vmnet-natd. I think some of these are due to File Sharing and Printer Sharing being enabled in the Sharing Preferences - but they've been enabled for over a year.
Thanks in advance for any advice.

Safari gives the error message
Safari can't open the page "[URL]" because your computer isn't connected to the Internet.
on any attempt to access a page by URL. If I put in an IP address it loads fine (aside from not being able to resolve any links to images, etc. which are linked using a domain name).
nslookup google.com on the command line gives the error:
/SourceCache/bind9/bind9-31/bind9/lib/isc/unix/socket.c:4525: bind: No route to host
nslookup: isc_socket_bind: unexpected error
DNS resolution does not work on Firefox either.
All checkboxes in the System Preferences>Network>Advanced>Proxies tab are unchecked. The box at the bottom ("Bypass proxy settings...") contains:
*.local, 169.254/16
Thanks for trying to help me out! I'm happy to provide any other information that might be useful to you.

Printer Dialog Box with No. of copies & Print Range.

I am trying to print a report(oracle) from a form (using a custom PRINT button) and wanted the printer dialog box to appear, for which I used the "WIN_API_DIALOG.SELECT_PRINTER(prtname, port, true)" API in the "When button pressed trigger".
But this API only takes care of a printer change, my issue here is how do I capture the changes pertaining to Orientation, Number of Copies, Print range etc. I know there is the "Properties - Advanced" option in the printer dialog box but changing values there doesn't help, as I had already mentioned the API passes only printer name.
So, if any one has faced a similar issue and has a solution,
PLEASE RESPOND IMMEDIATELY !!!
Thanks

Unfortunatley there is no way to give Forms that information. The printer dialog in D2kwutil is only designed to get the printer name / port, none of the other information. Even it it could Forms does not expose an API to effect the PRINT; built-in.

Print dialog box changed, no longer offers certain options

One of my users suddenly noticed that two of her machines' print dialog boxes have changed when trying to print out of Acrobat. She's used to seeing this screen when she goes to print:
However now she sees this screen instead, and it's missing the Page Size & Handling options.
Using Acrobat X Standard, tried reinstalling but it didn't fix the problem. Any ideas?

Which dot version of Acrobat X Standard is loaded? Update to the latest version which I believe is 10.1.10 now.

How to suppress the Print Dialog Box?

Running an (ASP.NET /Crystal Reports 2008) application and using CrystalReportViewer control. Is there way to suppress the print dialog box when I click the print icon on the report tool bar?
Edited by: juRamz on Aug 26, 2009 2:54 PM

Hello,
Sort of, CR needs the info. Only option is to create your own print button that has all the info filled in. It's a Windows Framework Common dialog box that CR calls so it's the OS that is prompting for the info.
Using ReportClientDoc here's a possible solution, note that this too has a dialog box to select the printer:
private void button1_Click(object sender, System.EventArgs e) // Print To Printer button
    System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
    PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
    CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
    //CrystalDecisions.CrystalReports.Engine.PrintOptions newOpts = new PrintOptionsClass();
    pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PrinterName = cboCurrentPrinters.Text;
    rasPROpts.PaperSize = (CrPaperSizeEnum)
        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
    rasPROpts.PaperSource = (CrPaperSourceEnum)
        pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
    // new API added to allow changing printing options
    newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
    newOpts.DissociatePageSizeAndPrinterPaperSize = true;
    rptClientDoc.PrintOutputController.ModifyPageMargins(0, 0, 0, 0);
    rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
    MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

Corrupt Print Dialog box

I recently upgraded Reader to XI and am now getting this corrupt Print Dialog box when I try to print a pdf from within IE10. Has anyone ever seen anything like this? Windows 8, IE10, Reader XI

I have 600 users at my company that get the garbled print dialog box with Adobe 9 and IE 11. I used Group Policy to turn on Protected Mode for the Internet and Intranet and now the print dialog box works. Here is where you can find the setting on local group policy (for testing if you are in corporate environment).
Computer Configuration->Administrative Templates-->Windows Components->Internet Explorer->Internet Control Panel->Security Page. You will then go to Internet Zone or Intranet Zone depending on your needs and then Enable "Turn On Protected Mode". Run a gpupdate from command prompt. Hope this helps.

Print Dialog Box for Addon is not showing in Terminal Server

Dear All,
I have created a addon for Automatic Sales Invoice printing that prints the crystal report directly to the printer bu opening a
print dialog box for printer selection through SDK code.
The Same addon works fine on the server with print dialog box being showing through SDK code.
But while running on Terminal Server , print dialog box is not showing any printer though printers are redirected to that
terminal server.I am not getting whether the problem is in my addon or in the terminal server printer settings.
Please suggest as i need to know the reason urgently.
Thanks
Amit

Hello Edward,
Thanks for your reply .
But the problem is that while running on normal server the print dialog box appear with the printer name in my addon for printer selection .
But while using terminal server , the print dialog box is not getting any printer in the dialog box .That's the major concern for me
is their any way to check that why the printers are not showing in print dialog box.
Thanks ,
Amit

Printer dialog box does not appear in Photoshop CS.5

I use Photoshop CS.5.1 with a Macbook 2013 using version 10.9.5. The printer works perfectly with all other applications but in Photoshop no printer dialog box comes up and the print job does not appear in the printers queue. Anyone the same issues?

First, try nuking (deleting them and letting the application create new ones) your Photoshop preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Acrobat XPro, new printing dialog box

In December Adobe XPro said there was an update. We loaded this update and noticed that the print dialog box had changed dramatically. Also the "none" feature is no longer listed under the icons. Just fit, actual size etc. We used to just select our plotter and the preview would switch to 35.99 x 24 but now it stays at 10x8. We print 24x36 and need them to scale. What happened and how do I correct this?

Dear user,
In our latest update 10.1.2, we have revamped our print dialog towards more simpler and comprehensive UI and that's why you are noticing change in the dialog.
In case you are searching for 'None' option, it is now called 'Actual size' in new layout. Also, setting 'Shrink' as your page handing option will automatically scale your document to your page size.
Hope this will solve your problem.
Thanks!

Print Dialog box has changed along with printing function

Similar Messages

Maybe you are looking for