Print Different Size Photo, one per page

I am using PS5 in 64 bit mode.  I print on a Epson 3880 printer.  I shoot all photos in RAW.  I process all my RAW files in ACR accomplishing 80% of changes and the balance 20% in PS.  The output of my retouch is a Master Image (MI) File that I would like to print at different sizes.  I am starting to sell my images at Art Shops and Hops.  My customers would like to have different size images of my MI's  How do I print from the MI, different sizes images with a 150 - 300 ppi and maintain the integrity of the MI?
I have tried the Image Tool but it will not let me print the image sizes that my customers want.  The Image Tool only allows me to change one dimension either (H) or (W) but not both.  Help.
Jack

If you want to print standard size images like 16x20, 8x10, 5x7, 4x6 etc these have different aspect ratios you will need to crop you image to the correct aspect ratio for the print you want or you could print different print sizes that have the same aspect ratio.  Like you camera most likely has a 3:2 aspect ratio if you use a DSLR. You could print all 3:2 aspect ratios image on you 3800. 3x2, 6x4, 9x6,12x8 15x10, 18x12, 21x14,  24x16... all that needs to be changed is the print DPI setting without resampling.    You have a 3800 that can print up to 17" wide.    You can print any size you want.  Some image cry out to be cropped.  They look best cropped for image composition is often best as some non standard aspect ratio.

Similar Messages

  • Will Aperture print different size photos on 1 sheet?

    In Aperture, is it possible to print multiple photos per sheet, with different sizes for each photo? Each photo may be unique, or I may want to use the same photo for each size. In the past I have used Qimage on the PC, and would like to know if Aperture can handle this as well.
    thanks
    Tom
    Powermac Quad   Mac OS X (10.4.4)  

    I guess the light table, as a virtual table, is meant to be limitless in dimensions. I don't see a way to constrain its aspect ratio directly.
    But perhaps here's a workaround, certainly not ideal but perhaps at least useful: just make your viewer window the appropriate aspect ratio as the paper you want to print to. Eyeballing may work out fine, but to be more specific, you could start with a new version of an image and crop it to the exact aspect ratio you want. Then add only that one shot and make it large enough to fill the viewer window, adjusting the shape of the viewer window to fit that placed image closely. Now you can unplace that image and you're left with a blank light table, the viewable portion of which is the precise aspect ratio you need for your paper. So you can place your images to fit within that window -- if you end up going over one edge (that is, growing your table) you can simply right-click and "zoom to fit" which will fit all the images in your viewer window. The key is that the viewer window is the right proportion.
    I think an option to have the table constrainable in proportions is a good idea, but this might work in a pinch. Just an idea.
    Mark

  • I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

    I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

    You can make a Book and have a photo on one side and your text description on the other.

  • Print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9

    I'm trying to print multiples of the same image on one paper. I tried to change the layout to 9 per page, but it's only showing up and printing one per page, though it is the size i would like. But only one image is showing up as opposed to 9. HELP!!Version 7.0 (826.4)
    I'm using Preview Version 7

    Hello @kgingeri1, 
    Welcome to the HP forums.
    If you have sent a test print via ePrint, and experience this issue, i would call the Cloud Services department.
    If ePrint works fine, it is definitely a Google Cloud Print issue.
    Also, when you print from your android device, are you using Google Cloud print or the HP ePrint app?
    Please call our Cloud Services at 855-785-2777.
    If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Hours:
    Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
    Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
    Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
    Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • Print Different Sizes Images

    I use CS5 / 64bit and print on a Epson 3880 printer.  I sell my images at art shows & hops.  I shoot all image in RAW, on a Nikon D80.  I process all images first in CR.  When in CR I do not use the Crop Tool but do use most the other available tools.  I am able to process 80% of images corrections, in CR and the balance in Photoshop CR5.  I sharpen all image with PhotoKit 1.2.  I save all my processed images, in a Master Image (MI) file that can be accessed through Bridge or Photoshop.  The smallest image I sell is a 5x7 and the larges is 17x22.   How do I print different size picture image from the MI and keep resolution between 200 - 300 ppi, one per page to meet the demands for my customers.
    Thanks,
    jacklinn

    Hi,
    This forum is related to queries on the 'Adobe Community Help' application. For Photoshop queries, post your query on the Photoshop forum.
    Regards,
    Sandeep

  • HT204135 I recently migrated from a 2 year old MacBook Pro to MacBook Pro Retina and now cannot get my LaserJet 3200 to print. I downloaded drivers from HP Support site but printer just prints a line of gibberish per page, and many pages.

    I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?

    Hi
    where can I find the "generic PCL driver" you referred to Greg?
    Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
    Find by product 
    Go
    How do I find my product name / number?
    5 matches found. Please select one below
    HP LaserJet 2100 Printer series
    HP LaserJet 2100 Printer
    HP LaserJet 2100m Printer
    HP LaserJet 2100se Printer
    HP LaserJet 2100tn Printer
    HP LaserJet 2100xi Printer

  • How do I print more than one custom-size photo on a page in PSE 10?

    I recently upgraded from Photoshop Elements 6 to Photoshop Elements 10.  I make greeting cards, and on PSE 6 I was able to print two custom-size (6-1/2” x 5”) cards on each 8-1/2” x 11” sheet of photo paper.  The option to print more than one custom-size card on a single sheet of paper is not available in PSE 10.  I want to know how I can print more than one custom-size card (or photo) on a page in PSE 10?

    In Editor:
    File>Print>#4 Select type of print>picture package

  • Cannot print actual size when choosing several pages per paper

    I'm using Adobe Reader XI and trying to print a pdf (exported from InDesign)´where each page is in A5 format. I want to print two A5 pages for each A4 paper. However, when I click the button Several (or similar, I'm using Swedish version) there is a fixed 25 mm margin around each A5 page so that the pages are much reduced on the printout. I'd like to print actual size, and I think this was possible in a previous version. If I print one A5 per A4 paper I can print the actual size. I tried the button Print Format (equiv.) but the margins are fixed and cannot be changed. Awkward. Thanks for help or explanation why this is so.

    I have a little more information. I turned on "single hairline" border and as you can see, it's converting my square pages into "US Letter" pages BEFORE applying them two-to-a-page. So it's using my selection of "Paper Size" as both the source and destination paper size, rather than just the destination size, because my source is obviously 12x12 square (confirmed by looking at page properties in preview). Apple, please fix this

  • Folder/ file icons are different sizes from one window to another!

    Hi there
    I am having an extremely annoying problem where all my folders and files (in icon view) are totally different sizes from each other from one window to another. For example, I might click on a folder that's icon is small sized (64x64), but when that folder opens up, the icons of the subfolders inside are huge (276x276) and need to instantly be resized and re-arranged. Then if i continue to open one of these subfolders, the file icons inside it are now medium sized (96x96). Each new folder that I go into on my hard drive will be differently sized and I end up spending ages resizing and re-arranging them before I can do my work. This problem never happened in Leopard and Im despairing of what to do.
    Is there a way of setting a default icon size and spacing that can then be applied to every folder and file on the hard drive? I have used the 'Use as defaults' option on the 'View options' window but this doesn't apply it to anywhere else besides the current window you are on.
    Surely, Im doing something wrong as Apple could never have overlooked such an obvious problem like this?
    Can anyone advise?
    Many thanks
    Dan

    The Finder will (theoretically) remember the view settings for each individual folder that you visit. If you have not opened a particular folder before, you should get the default view settings, but once you have changed the view then that is what you will get on subsequent visits. You can erase the previous settings by deleting the (normally invisible) .DS_Store file that is created in a folder when it is opened, but this file can contain other Finder metadata.

  • IPhoto freezes when trying to print small size photos

    I'm trying to print the smallest sized photo. Everytime I ask it to print it freezes and I have to force quit. If I print a bigger sized photo, such as 4X6, it works fine. Earlier in the day I was able to print the small photos. I've trashed the plist and restarted but it's still doing it.

    The settings that I show in the screen shot give you, as owner, complete access to that folder and all files inside. I also set my admin name as the group because I'm the only user on the computer and set others are read only. As long as you have read and write access you good to go. Then the bottom check boxes apply those permissions and will unlock any file that may have inadvertently been locked.
    You can set the permissions a different way as follows:
    Setting Permissions for iPhoto Library Folder
    Select the iPhoto Library folder and type Command-I.
    When the Info window comes up go to the Ownership and Permissions section and make sure You have Read & Write permission and that the Owner and Group have Read & Write also. Others - Read Only.
    Then click on the "Apply to enclosed items..." button.

  • IDCS2 - Print/save seperate pdf files per page (with custom filenames)

    Hi everyone,
    I'm having this issue here. I've created a new document after data merging, this document has 50 pages, every page contains an amount, a code and an image. Now i need to have 50 seperate pdf files, so 1 pdf per page, from this with a file name that goes like this: "ammount_code.pdf"
    Is this possible, if yes, can you explain like I was a 3-year-old kid please? :-)
    Thanks in advance!!

    I don't think there is any nice, automatic way to do this out of the box. It might be scriptable, though, since you could probably pull the amount code for each page that way, but you'd need to ask over in the scripting forum for the fastest response.
    In the meantime, someone asked a similar question last week, and I pointed him to a paid plugin, and you can also export the document to PDF, then use Acrobat Pro to extract the pages to separate files, but at that point I think you'd need to manually rename them to get your codes as the filenames.
    Peter

  • Load different css for one master page in different variation labels

    Hi
    i have two variation label in my SharePoint 2013 site collection
    one for English language 
    and one for the Arabic language 
    i have used the twitter bootstrap so now i have one master page and one style file for the two sites
    i need to load custom css for Arabic to handle the RTL so how can load English style and Arabic style 
    should i use cssregistration and how 
    or any suggestion please :)

    Hi,
    We can use jQuery to add the css file based on some conditions, the following code for your reference:
    <script type="text/javascript" src="http://code.jquery.com/jquery-1.11.2.min.js"></script>
    <script type="text/javascript">
    $( function() {
    if ($("#label1").val()== "English") {
    $("<link href='css/custom-en.css' rel='stylesheet' type='text/css' />").appendTo('head');
    } else if ($("#label2").val() == "Arabic") {
    $("<link href='css/custom-ar.css' rel='stylesheet' type='text/css' />").appendTo('head');
    </script>
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Can I print the same image at different sizes on the same page?

    Hi everyone.
    I am trying to print a 5x7" image and 4 wallet sizes of the same photograph on 1 piece of paper. Can apperature do this? I'm just trying to utilize a whole sheet of paper.
    I've been looking at contact sheets to try this but it doesn't seem like it's going to work. I was hoping for a really simple way to do this but I cannot find it.

    I've not found a way to do that. The printing portion of the software is, at this time, somewhat rudimentary.

  • Print different images on one sheet

    I would like to be able to print 3 different pictures on a 10x14 sheet of paper. I'd like to do one 8x10 and to 4x6 photos, but I'd like each of them to be a different photo. Is there a way to do this?
    Thanks,
    Andrew

    Choose Custom Package from Print Layout panel on top right corner of Print module. This will allow to layout multiple cells into which you can drag your images.

Maybe you are looking for