Print Dot Matrix codes in InDesign CS6
In InDesign, you can display barcodes by using a barcode font.
Is there anything similar available to display Dot Matrix codes.
Thanks
No.
Similar Messages
-
Print PDF report directly to a network printer (dot matrix)
Dear All,
I have a report of PDF output generated from an XML Report..
Can I print this PDF report directly to the network printer (dot matrix), by default, like a normal text report output.
If yes, how can I make this possible...
Please update...Hi,
Yes u can do that ,first setup the printer on the o/s and refer below documents
Please refer below documents
How To Print XML Publisher PDF Reports Via The Concurrent Manager [ID 338990.1]
How To Print Concurrent Requests in PDF Format [ID 333504.1]
How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set [ID 443778.1]
Regards -
Generate and print data matrix code from a vi
Folks,
does anyone know how to code a string into a data matrix code? How can the code be printed most straightforward? Probably it's the best way to generate the code in an image or picture format and send it to the printer that way? The printer we are using is a barcode printer, not an usual laser printer. According to the specifications this printer is able to print data matrix codes. Unfortunately, the vendor of the printer wants the user to use the proprietary software and does not provide a LabVIEW driver.
Thanks for any hint,
P.Hi
I think the Dymo Labelwriter is a general purpose printer. So you may send data as you do to any printer. Her is a link to free barcode kit for labview http://code.google.com/p/lvbarcode/downloads/list
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
Question: Error Code 4 InDesign CS6
How do I open an indesign CS6 file as a copy in attempts to retrieve the error code 4 message I am receiving? Right clicking does not give the option to open as a copy.
Adobe Indesign CS6 has issues, Adobe says not but only reaffirms with posts like this. We still have a problem here with Indesign and students opening files and getting an error code 4 or error code 5. Quit Indesign and open it again and the files are fine. If you keep trying opening and closing the files it eventually happens again with the error.
Like the lockfile gets corrupt and Indesign caches the problem or something. Not sure.
Here is a video I found showing the issue.
http://youtu.be/vYp2_QxM3wc
Here is my original posting with Adobe blaming us:
http://forums.adobe.com/thread/1168914 -
Can a color laser printer be adjusted to match InDesign CS6 colors?
I'm trying to print through a laser printer (color Brother HL-4570CDW) but it muddies all the colors and darkens them.
The inkjet Epson does ok, but I'd like to save ink, if possible. Is there a way to adjust the way the printer reads the colors?
I'm not totally experienced in color profiles and such. I tried both CMYK and RGB, but still it looks awful. It may be the printer, but is there anything else I can do?
Thanks, I know this is a stupid question!The printer in question, the Brother HL-4570CDW, is a fairly inexpensive SOHO laser printer typically used to print “office” documents. As such, it doesn't offer direct options either on the front panel or via the driver to match typical commercial print conditions such as SWOP. Most content sent to such a device is sent as RGB from printer drivers.
(For your convenience, I have attached a copy of both the specification sheet and the manual for this device!)
Some ideas:
(1) Don't expect reasonable CMYK colors if you are using what Brother describes as the “Windows(r) printer driver (the most suitable printer driver for this product)” and what is apparently installed by default (see page 26 of manual). It invokes an emulation of HP PCL5C, pure RGB, which is a real problem from InDesign. Install their “BR-Script printer driver” and turn off the option for RGB vivid color and try that instead. BR-Script is Brother's emulation of PostScript 3 - definitely not Adobe PostScript 3, but it possibly will give you better results than their emulation of PCL5C!
(2) Assuming you are printing BR-Script and the colors are still very problematic, try recalibrating the printer via the printer's front panel. See page 82 of their manual!
(3) Export PDF as PDF/X-4 and try printing the PDF/X-4 file from Acrobat Pro or Adobe Reader, again using the BR-Script driver. This might improve things.
If you still can't get decent color and the printer is still “new,” I'd try to return the unit as defective. You can get much better printers for comparable prices from Xerox that have Adobe PostScript 3 and have reasonably good color. Otherwise, if still under warranty, I'd contact Brother and see if they have solutions other than blaming Adobe somehow!
- Dov
PS: This isn't the first report I've heard of serious problems with Brother CloneScript devices. -
Pixelated printing of linked graphics in InDesign CS6
Since upgrading to this version (CS6 for Mac), I have often had issues correctly printing placed graphics. They look low res though they have been properly "placed" and there are no errors detected in preflight. I just tried printing a letter with a placed file and two copy/paste images from the internet. The internet images look better than the placed graphic psd file! Everything is crisp on screen, but placed PSD, JPG, AI, PDF, all look crummy when printed.
I have looked through Preferences and have "High Quality Display" chosen, but that's only for screen viewing anyway, right?
I would appreciate any direction on this. Thank you!!Genius! Thank you so much, it worked!! I so appreciate your responding so quickly. Have a great day!
-
Crystal report printing using epson dot matrix printer (continouos paper)
Hi there, im tiff from the philippines.
i have a question on printing using a crystal report. How do i print using epson continuous printer(dot matrix)? im having a problem printing to that type of printer specially using continuous paper. the first page is correct but unfortunately the succeeding pages are not. its automatically adjusted upon reaching the second page. hope you can help me.
thanks a lot and looking forward to hear from you soon.
tiffCheck with the printer manufacturer that the matrix printer is Unicode compliant. If it is not, it will not work with Crystal Reports. If it is, make sure you have the latest printer driver updates.
Download SP 1 for CR 102 from here;
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
See the following resources re. printers;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29
[Note #1314394|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Ludek -
Hi ,
I have developed delivery note using smartforms when i see print preview of this form giving logical destination laser printer it is coming fine and print is also good. but as my client wants to take the form print both on laser and dot matrix so when i am giving logical destination as dotmatrix printer if i see print preview then the total settings are disturbed like boxes and also in print the box lines are not printing.
what i have to do to get good printout on both the printers.
thanks in advance.Best idea to print your script on both dot matrix and laser printer is, create one table and allow user for maintainance, now before print preview go and check this customized table(using subroutines) and if laser printer, print all boxes... if on dot matrix remove what all lines not supported on dot matrix printer.
EX:
Go and fetch printer name from customized table,
IF printer = 'LASER'
***Draw boxes
***LINEITEMS
ELSEIF printer = 'Dot matrix'
***LINEITEMS.
ENDIF.
Regards,
Sairam -
Crystal Report , Dot Matrix printer , Landscape , Legal
Post Author: naser
CA Forum: General
IDE : VS .NET 2003,
Platform : .NET 1.x, .NET 2.0, Hello I have been working 4 day's only to get print job which is should be on legal size and landscape mode Here is my story , I have u2022 Dot Matrix Epson Printer (Defaults setting) u2022 Legal size paper First : In crystal report designer I setup printer I select the PAPER SIZE = legal Orientation = Landscape Using this code Code:
Dim Frm1 As New Form1 Dim RV As New CrystalDecisions.Windows.Forms.CrystalReportViewer CR.SetDataSource(PrintDatabase1.Tables(0)) RV.DisplayGroupTree = False RV.DisplayToolbar = True Frm1.Controls.Add(RV) Frm1.WindowState = FormWindowState.Maximized RV.Dock = DockStyle.Fill RV.ReportSource = CR Frm1.Show() When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know second : same situation but I add this code Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know thired : Code:
CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape CR.FormatEngine.PrintOptions.PaperOrientation = PaperOrientation.Landscape
Again When print the Document , the printer print in Portrait Orientation mode . why I donu2019t know
Now after I changed the defaults setting for the Epson printer to Orintation = Landscape Paper size = Legal And used this code Code: SetDataSource(PrintDatabase1.Tables(0)) CR.PrintOptions.PaperOrientation = PaperOrientation.Landscape CR.PrintOptions.PaperSize = PaperSize.PaperLegal CR.FormatEngine.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperSize.DefaultPaperSize = PaperSize.DefaultPaperSize.PaperLegal The printer print in Landscape mode but it not printing the data which located in the right side of paper While that I checked the properties of printer from printer button in the crystal report viewer I found the orientation = Portrait I think its mean the program print the document by coding as landscape but printer receive it and print it as portrait because that it is not shown the right side of paper
i'm upgrade fees program for our Department which has been developed using Q basic language, and the were using same printer and same size of paper. they were printing fine without any prablem like what im facing help to get the help soon thanks for all the membersQuestion is already answered in link
Printing Speed on Dot Matrix
Jeyakanthan -
Problem with countinuous paper printing in dot matrix printer
Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
Printer initialization
Reset after exit
Cover page
First Page
Start of even page
Start of odd page
Start of page
End of first page
End of even page
End of odd page
End of page
Start of line on an even page
Start of line on an odd page
Start of line
End of line on an even page
End of line on odd page
End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
VishnuHi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan -
Dot matrix printing on 15 x12 inch paper
Hi
I have created report for purchase register
Report is so large to print
so i have desiged this report in PDL for dot matrix printer and paper size 15 inch x 12 inch.
When i going to print this report, i not get proper print out
Please tell me the setting regarding to print this report on dot matrix 15 x 12 inch continous paper.
Regds
KishorHI
Thanks for you valuable suggestion
Printer at my end is not supported by SAP B1
ok
what is use of Function grouplinenum() in PLD
I wants the follwing output
docnum, Acct Code, Acct_total document_total
1 xyz1 500 1100
xyz2 600
2 abc1 1000 2000
abc2 500
abc3 500
Total 3100 3100
Please study the following query for above and Please tell me it is possible to design PLD
SELECT A.SERIESNAME, A0.DocType, A0.DocNum, A0.DocDate, A0.NumAtCard, A0.TaxDate,
A0.CardCode, A0.CardName, A1.City,
A2.TaxId11, A2.TaxId1, A2.TaxId2,
A4.TAXTYPE, A4.VATRATE, A4.vattaxable, A4.Totvat,
A0.DOCTOTAL, A0.WTSUM,
A5.TAXCODE, A5.formatcode, A5.ACCTNAME, A5.ACTOTAL,
(case when TAXTYPE IS NULL then A0.DOCTOTAL + A0.WTSUM ELSE 0.00 END) AS LabourChrg,
(case when TAXTYPE IS NOT NULL
then A0.DOCTOTAL + A0.WTSUM - ISNULL(A4.VATTAXABLE, 0.00) - ISNULL(A4.TOTVAT, 0.00) ELSE 0.00 END) AS LabourChrg
FROM NNM1 A
INNER JOIN OPCH A0 ON A.SERIES = A0.SERIES
LEFT OUTER JOIN CRD1 A1 ON A0.CARDCODE = A1.CARDCODE AND A1.LINENUM = 0
LEFT OUTER JOIN CRD7 A2 ON A0.CARDCODE = A2.CARDCODE
LEFT OUTER JOIN
(SELECT C0.DOCENTRY,
MAX(case when C1.nftaxid = -7 then 'L' when C1.nftaxid = -4 then 'C' else 'O' end) as TAXTYPE,
MAX(C0.TAXRATE) as VATRATE, SUM(C0.TAXSUM) as TOTVAT, SUM(C0.BASESUM) as VATTAXABLE
FROM PCH4 AS C0, OSTT AS C1
WHERE C1.ABSID = C0.STATYPE
AND C1.nftaxid in (-7, -4)
GROUP BY C0.DOCENTRY) A4 ON A0.DOCENTRY = A4.DOCENTRY
INNER JOIN
(SELECT E0.DOCENTRY, E0.TAXCODE, E1.formatcode, E1.ACCTNAME, E0.ACTOTAL
FROM
(SELECT D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE) AS ACCTCODE,
SUM(D0.LINETOTAL + D0.LINEVAT + D0.DISTRIBSUM + D0.STCKDSTSUM) AS 'ACTOTAL'
FROM PCH1 D0 LEFT OUTER JOIN PDN1 D1
ON D0.BASEentry = D1.DOCENTRY AND D0.BASELINE = D1.LINENUM
GROUP BY D0.DOCENTRY, D0.TAXCODE, ISNULL(D1.ACCTCODE, D0.ACCTCODE)) AS E0
INNER JOIN OACT E1 ON E0.ACCTCODE = E1.ACCTCODE) A5
ON A0.DOCENTRY = A5.DOCENTRY
WHERE A.SERIESNAME ='[%0]'
ORDER BY DOCNUM
Thanks -
tell application "Finder"
activate
set thefolder to choose folder with prompt "Select a Folder with InDesign Files to be Printed" as text
set thePath to thefolder as text
set the selected_items to every item of folder thefolder
if the selected_items is {} then
beep
display dialog "Please select a folder with InDesign files before running this script." buttons {"Cancel"} default button 1
end if
repeat with aFile in selected_items
tell application "Adobe InDesign CS6"
activate
with timeout of 600 seconds
set user interaction level of script preferences to never interact
open aFile
tell document 1
tell print preferences
set active printer preset to "Catalog Pages"
set page range to all pages
end tell
print without print dialog
close saving no
end tell
end timeout
--might need this delay
--delay 10
set user interaction level of script preferences to interact with all
end tell
end repeat
tell application "Finder"
activate
display dialog "Batch Printing is complete!" giving up after 5
end tell
end tellHi
After I put a small delay in as shown, your code ran fine, tested on about twenty ID files, using ID CC 2014, OSX 10.10.2
tell document 1
delay 0.5 -- delay added
tell print preferences
set active printer preset to "Catalog Pages" -
Stop rolling the the paper out in dot matrix priner once the print is done
Hi,
I have used the below code to print a document and the printer used is dot matrix But,it rolls out the page once the print is done.
I want to control the printer so that it stops rolling out the page once the print is done. Or set the print based on the paper size and stop rolling the paper.
public void Print_Doc(string Path)
try
Microsoft.Office.Interop.Word.Application word = new Microsoft.Office.Interop.Word.Application { Visible = false };
Microsoft.Office.Interop.Word.Document doc = new Microsoft.Office.Interop.Word.Document();
// where did you get this file name?
// as you mentioned, you open your word document here
doc = word.Documents.Open(Path);
// in your button click handler, just call PrintOut() function
// if doc == null, open the document
if (doc == null)
// here i assume fileName has been assigned
doc = word.Documents.Open(Path);
doc.PrintOut();
catch (Exception ee)
MessageBox.Show(ee.Message, "Exception", MessageBoxButton.OK, MessageBoxImage.Error);
return;
Please help me resolve this,
Thanks,
Shreyas MNot so much wpf there.
Keep an eye out because this thread may be moved to another forum.
I think Word will "throw" the page at end.
You could check the advice here:
https://support.microsoft.com/en-gb/kb/233493?wa=wsignin1.0
See if you have an unwanted page break or something like an outsized table which is making it think it needs to print more.
You might get lucky.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
Java Printing and Dot Matrix printer
I'm not sure if this is the right forum, but I didn't see any forum about printing.
I have gotten printing working for my application to both "real" printers and dot-matrix printers. The problem is that I want to display a print dialog box, and have my application detect whether the user selected a "real" printer or a dot-matix printer.
I've dumped out the supported DocFlavors for both kinds of printers and haven't been able to find any reliable way to determine the printer type. Has anyone found a reliable way to do this?
I need to detect the printer type becuase I use one DocFlavor to print to a dot-matrix and a different DocFlavor to print to a "real" printer.
Thanks for any help,
--RyanThanks for the replies,
I would like to find some way to auto-detect this, if it is possible. I swear that I will only use the PrinterResolution class for good and not evil!! I was looking at the supported printer resolutions for the printers that are in my office here, and this is what I found:
Supported Resolutions Win32 Printer : FX-890 (my dot matrix)
24000x14400 dphi
12000x7200 dphi
12000x14400 dphi
Supported Resolutions Win32 Printer : HP LaserJet 4050 Series PS
30000x30000 dphi
60000x60000 dphi
120000x120000 dphi
Supported Resolutions Win32 Printer : HP Color LaserJet 4550 PCL 5c
60000x60000 dphiIt seems interesting that the laser jets only report resolutions that are the same horizontal as vertical, and that the dot matrix supports resolutions that are have different horz vs vert resolutions. Maybe I could use this to make a guess?
Unfortunately we don't use any native code in our application, although it could be a possibility if there is no 100% java way to auto-detect this. The vast majority of our users will be running Windows. Do you know of a way to figure this out in Windows?
Thanks,
--Ryan -
Labels printed in Dot Matrix Printer
Hi Experts,
I am new to the label creation.
I need to create a new label which will be printed using a Epson Dot matrix printer.
I got an idea how to do it in zebra printing. But still I am wondering how it can be done for a dot matrix.
Whether it is same like zebra programming or dot matrix do have some other coding language to display the label?
Could you please explain me on this?
Thanks & Regards,
Arun.hi,
there is a huge difference between a standard dot matrix printer and a zebra printer.
a zebra printer mworks with ZPL II commands. All other printer works otherwise.
However. If you use smartforms the code in the smartform is converted to ZPL|| automatically. ( I think you can see it in the spool but i am not sure)
If you use sapscript you have to code the ZPLII yourself.
On an other printer you can work with normal commands. You have only to take care that the printer has a porper driver. Ad fthe form has the proper pagelayout.
This will do.
Gr., Frank
Maybe you are looking for
-
FireWire Problems Connecting Target MBP to Host MBP
Hey guys, i am having a problem when i try get into target disk mode. I have 2 MBP's , one of them is working flawlessly while the other wont log on to any accounts. I cant get passed a gray screen, i was told to transfer my files from the unbootable
-
MySQL Error#: 2002 Dreamweaver CS5
HI Never had this problum before so not sure why now. MySQL Error#:2002 A connection attempt faild because the connected party did not properly respond after a period of time, or established connection faild because connected host has failed to res
-
Pass PO Num parameter to SAP transaction iview
Hi, I have a table column in my WDJ application that contain PO number. I have created an SAP Transaction Iview for TCode me23n (display po). When user clicks on the PO number in the table column, it should dynamically pass the PO number to the trans
-
Problem in transaction SMQR in CRM system
I was told there is a problem in an CRM system and that I will see it immediatelly in transaction SMQR. As an non CRM specialist I do not know to what pay attention and how to solve the problem. Is there any documentatition When entering the transact
-
Why Can't my PC install MediaSource Player/Organizer 5.10
I have XP service pack 2 and when I try to install the application appears a message saying "The installation program can't detect a compatible product on the system" Plesase Help...