Print driver not available

I am trying to set up an HP Envy 5646 printer for the first time (in the UK). I am receiving the following message on the hp support page:"We were unable to find any drivers for your product. Drivers may be in development so please check back at a later date ....." When I try to search through hpdriver.us (I cannot find a UK equivalent), I am taken to a Google page and invited to download something that appears to have nothing to do with HP. What am I supposed to do to connect my macbook to my new printer?

From what I see there is none for your printer in Mac....Did you check this before hand before buying the printer.

Similar Messages

Mac osx 10.8.1 update printer driver not available

We are getting a message asking to update the printer (HP Laserjet 1320). If we accept it searches for the update and returns the message "...unavailable".
OK, so how do stop that message window from popping up?

Normally I do not shut down my iMac - rather I just let it sleep as per System Preferences > Energy Saver settings. This morning I did a complete shut down and then restarted and the problem has gone away again. Then I did a bunch of testing by launching all the usual applications I might have run since updating to 10.8.2 to see if one of these triggers the problem. After each new application launch I turned on the printer to see if the problem would occur (and then shut down the printer before the next application launch.) So far I haven't found what triggers this but once triggered it seems to then occur with each printer start (until I shut down the iMac again I guess.) I will have to keep a close watch on what I launch for a while to see what I have missed.

D7360 automatic duplex printing is not available with latest driver

d7360 automatic duplex printing is not available with latest driver
This question was solved.
View Solution.

Hello ephsh,
Welcome to the HP Forums.
I see that you are having an issue attempting to do some duplex printing.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I am going to attach a document that deals with a Two-Sided Print Option Is Not Available Even Though an Automatic Two-Sided Printing Accessory (Duple....
Please feel free to write me back at your convenience.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Oracle (OCI8) driver not available!

I have installed DAC successfully. So I start my client and am trying to create a new connection.
I did the following:
1) Clicked Configure
2) by default, Create connection is selected, I clicked Next
3) Entered Name, selected Connection Type as Oracle(OCI8), entered TNS names as ORCL and created new authentication file.
4) Clicked Test Connection and it shows the error 'Can't connect to the database'. When I click Show details, I get the following:
MESSAGE:::Oracle (OCI8) driver not available!
EXCEPTION CLASS::: java.lang.IllegalArgumentException
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:512)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::oracle.jdbc.driver.OracleDriver
EXCEPTION CLASS::: java.lang.ClassNotFoundException
java.net.URLClassLoader$1.run(URLClassLoader.java:200)
java.security.AccessController.doPrivileged(Native Method)
java.net.URLClassLoader.findClass(URLClassLoader.java:188)
java.lang.ClassLoader.loadClass(ClassLoader.java:306)
sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
java.lang.ClassLoader.loadClass(ClassLoader.java:251)
java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
java.lang.Class.forName0(Native Method)
java.lang.Class.forName(Class.java:169)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:510)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Can somebody help me resolve this issue?
Thanks in advance!!!

Resolved. ojdbc14.jar was missing in \bifoundation\dac\lib.
Downloaded and copied the file to the location and rebooted my system.

I can not update to itunes 10.4, and when I try manually it keeps saying error f drive not available??

I have tried loads of times to update to Itunes 10.4 but it fails every time and tells me to try and download the file manually then install it but this also fails and keeps giving me a error of "F drive not available"
I have itunes on a removable hard drive on my laptop if this makes any difference
Please help
Thanks

Open a Windows Command prompt, e.g. Hit Start > Run, type in CMD and press OK. Type in SUBST F C:\<enter>
This will map F: to C: until the machine is restarted or you enter
SUBST F: /D at the command prompt. Now you can try uninstalling or upgrading the software again. (If upgrading the software, install the software in the default location, not on the F:\ drive.)
tt2

[Solved]"foomatic-rip" for printer "Z22" not available

I found CUPS drivers for the lexmark Z22 here: http://www.linuxprinting.org/show_print … exmark-Z22 and I installed the printer successfully but I get this in the status field: "Paused: Filter "foomatic-rip" for printer "Z22" not available: No such file or directory". I checked AUR and there's no foomatic-rip package.
Last edited by jordanwb (2008-12-17 17:58:44)

pacman -S foomatic-db foomatic-db-engine foomatic-filters
foomatic-filters itself might even be enough in your case

HP Printer Driver not currently available from Software Update server

I have an iMac (early 2009) and an HP OfficeJet 6100 Series printer. I just upgraded my Apple Extreme Base Station and when I try to add the printer again thru the new Base Station the iMac says the software is available from the Apple Server but after searching it returns the following message: "Can't install the software for the Hewlett-Packard OfficeJet 6100 Series because it is not currently available from the Software Update server." This has been going on for days. I have the driver installed already from having the printer connected via USB and via my old Base Station but cannot "see" the printer on my new Base Station without adding it again.
Any suggestions?
Thanks,
Drew

Hi Drew, see if this helps...
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03404580 &lang=en&cc=us&taskId=120&contentType=SupportFAQ&prodSeriesId=79476&prodTypeId=1 8972
Wired (Ethernet) or wireless network connection
Click the Apple menu ( ), and then click Software Update . Software Update checks for available updates and updates the database that your computer uses to determine available printer software.
Click Show Details , select any available software updates, and then click Install .
NOTE:
Install all available software updates for best printer performance and functionality.
Turn on the printer, and then make sure that it has paper in the tray and that it is in a ready state.
Make sure that the printer is connected to the wired or wireless network, or is connected to the USB port of a Time Capsule or AirPort Base Station.
Click the Apple menu, and then click System Preferences .
Click Print & Scan , and then click the plus sign ( ) in the lower left corner of the window.
Under Nearby Printers , click the name of your printer.
NOTE:
If your printer is not listed, click Add Printer or Scannerfor a full list of printers.
Under Name , click the name of your printer.
NOTE:
Make sure that the printer kind is Bonjour or Bonjour Multifunction .
Click the Use box, and then select the name of your printer in the pop-up menu.
Click Add to add the printer to the queue.
If you are prompted to install any additional software for your printer, click Install , and then follow the instructions to complete the installation.
NOTE:
Quit and restart any applications that were open before adding the printer to use the updated HP software features.

Have MBP with OSX10.9- trying to connect HP Laserjet P1102w error msg on add printer says driver not available from apple - workarounds?

Trying to connect a new HP Laserjet P1102w printer via USB to a MBP running OSX 10.p and fully up to date. Problems getting the correct driver - does it exist and what are the workarounds?
Many thanks

Lots of information on the HP web site for this printer with Mavericks, a driver is available for 10.9. Try this web page and go from there.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=uk&dlc=en&s w_lang=&product=4110304

LaserJet Pro MFP M225dw driver not available for Mac OS10.4.11

I can print by connecting the printer to the computer with USB connector. But without the driver, the printer is seen by the computer as a generic postscript printer; and the printer's special attributes such as 2-sided printing is not made available. Is there any alternative driver that may be used for this combination, please?

Hi @ayame ,
I see by your post that you are looking for the drivers for 10.4.11. I would like to help.
Unfortunately the only drivers available from HP are from 10.7 and higher.
HP LaserJet Pro MFP M225dw Drivers.
You have to update the Mac to use the Full HP Software drivers.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet 1022 driver not available

I am running 10.8.2 on a MacBookPro. After the recent update of the OS my HP Laserjet 1022 stopped functioning. In Mountain Lion, the HP drivers are meant to be installed by the OS. However all my attempts to update the driver software from within System Preferences, to to install a new printer have failed. I always get an error message saying that the appropriate software was not available on the server. Anyone have any ideas on hwo to fix this, or where to get driver software that I can manually install?

Power cycle both devices and try by downloading manually necessary drivers:
http://support.apple.com/kb/DL907
After downloading software, try add your printer again.
Acording to this:
http://support.apple.com/kb/ht3669#HP
Your printer is supported.

Canon ip6000d printer driver not in driver list

Just bought a Macbook Pro with 2.5 GHz and it's working great. so far only one problem I haven't been able to fix. I have a Canon ip6000d connected to a Windows desktop which is always on. This desktop is hardwired to a Linksys router, and the Macbook connects to the router without any issue. When I go to system preferences and try to add the network printer, it shows up in the list of printers connected to the desktop as CANON PIX. I select the printer, and no driver is available. I try and "Select a driver to use...", the Canon ip drivers skip straight from 5200 to 6700.
Not only did I go to Canon's US website and download the latest driver, it's also supposed to be included with Mac OS 10.5. I tried connecting the computer to the Macbook by USB, and it worked without any issue at all, showing the correct (Canon ip6000d) driver. To me, this means that I have the driver installed on the computer.
In any case, I am still unable to print over the network. Any ideas?
a.s

As you have found, the Canon v4.8.3 driver for the iP6000D that is included with Leopard cannot be used when you are trying to connect to the printer when it is shared by Windows. For this type of connection, you need to use the Gutenprint drivers. However, the version 5.1.3 included with Leopard does not include the iP6000D. So you need to get v5.1.7 from Sourceforge (http://gutenprint.sourceforge.net/index.php3) which does include the iP6000D as a supported printer. Run this installer, it will remove the current v5.1.3 and install the v5.1.7 files. Then when you look through the list you will see the "Canon PIXMA iP6000D - CUPS+Gutenprint v5.1.7".
PaHu

PDF printer driver not loading

Ok...first off I had CS on another laptop and the driver was there. Got new laptop loaded CS and PDF printer didn't load up. Second. I got and loaded CS3 (not just because of the lost printer driver, but...) and loaded it onto the same *new* laptop and STILL not PDF printer driver. I've looked at the downloads and can't find it available there. This is driving me nuts. I develop proposals and other documents in word (not to mention the PIA factor of not being able to print directly to PDF in AI or PS) and have to dump files to a shared directory so that I can use Acrobat Pro 6 on a desktop before sending out to clients. Arrrrrgghhh (and yes, I know that Talk Like a Pirate Day isn't until Sept 19th.)
I have tried reinstalling or 'fixing' ABPro umpteen times now and find myself fulfilling Einstein's definition of insansity. Any ideas on what I can do to get a *&^%# PDF printer driver to load?

Hi Daniel,
I´m using AutoVue 3D Professional Advanced 20.2.0.... I´ve read that there were problems
in the version 19.xx (before version 20.xx)
Best,
Merkowitsch

Adobe PDF converter printer driver not installed: No longer working.

I recently uninstalled and reinstalled my Epson printer and now my PDF converter isn't working.
I'm using Win XP and Adobe CS3 Design Standard. I tried several of the suggestions here on the forums on reinstalling PDF converter driver and or switching ports, but to no avail.

Problem Solved !!!
Printer Name: Adobe PDF
Port: Adobe PDF Local Port
Advanced: Driver: Adobe PDF Converter
Spool Print and Start printing Immediately (Uncheck Send to Printer)
Once I got the above in place I was then finally able to install as noted below:
Try adding it manually: These instructions are for Windows 7 but I don't
think Vista's install varied much, if at all.
1) Open the Devices and Printers dialog box and select Add a Printer
2) Add a* Local Printer* at the next dialog box asking what type of printer
you want to install.
3. Select* Create A New Port* at the Choose Printer Port and select* Local
Port at* the type of port dropdown menu.
4. Click Next, then at the prompt name the Port "Adobe PDF" or whatever you
prefer.
5. Click OK and at the Install Printer Driver dialogue box, click Have
Disk and browse to *C:\Program Files\Adobe\Acrobat
10.0\Acrobat\Xtras\AdobePDF* folder and highlight the AdobePDF.inf file.
Click Open, then OK.
6. When presented with a list of Adobe PDF Converter options, select the
first item from the list and click Next.
7. Make sure the radio button is selected for Use the driver that is
currently installed (Recommended) Click Next.
8. The printer name dialogue box should default to Adobe PDF Converter, if
not change it to that exact name.
9. Then click Next through remaining screens to install.
At this point, the printer should be installed. Hopefully this helps.

Canon MG5220 driver not available on Software update server

I'm receiving the following error everytime I attempt to add the Multifunction Canon MG5220 printer ... Connected via USB and WiFi both modes fail to install the printer driver.
"Can't install the software for the canon MG5220 series becasue it is not currently available from the software update server"
I've downloaded drivers from the Canon site, however the Mac continues to attempt to reach the update server to get the driver without success. So I've not been able to print.
Strangley enough, the scanner driver portion is seen, but not the printer.

Resolved after downloading and running the setup file for this multifunction printer from Canon site.

Printer options not available to networked computers

Hello. Here at the office we have a network with a mix or PCs and Macs. We have an Epson Stylus Photo 1280 printer and an Epson Stylus C63. They are connected to my iMac running Mac OS X 10.4.10 and shared with the other Macs. I can access all the printer features, including "Print Settings" where you choose the print quality and the option to print only using black ink. All the other computers can't access this Print Settings, the option is simply not available for them in the print menu. So everyone has to print in color, and they can't choose better quality printing.
I tried connecting the printer to another Mac, and the same thing happened. The computer with the printer connected directly via USB is able to choose the different print settings but the ones connected via network cannot.
Is there anything I should check in the Sharing preferences, should I reinstall drivers in the networked Macs, or do anything special?
Thank you.
Hugo

To get the same settings appearing on the client Mac's that appear on the Mac sharing the printer, the same version of driver needs to be installed on all Mac's.
Usually the sharing of an Intel (Universal Binary) driver to a PPC Mac wouldn't be a problem, as the driver has been written to run on both platforms. However, I believe from information provided by Matt Broughton previously, that the Epson UB drivers only work for Intels.
I believe your comment about using Rosetta may be a workaround, but I don't know how you can force the Intel to share the driver using it. I don't think that setting the Printer Setup Utility to open using Rosetta will do it, as it is the Print Dialog Extensions (PDEs) that make the options appear, but it may be worth trying...

Print driver not available

Similar Messages

Maybe you are looking for