Print Entire Site Code

Hi All,
Is there a way to print the code of an entire site, not just
each page individually?

I think that would only print a visual representation of the
html pages and
not the code itself.
I'm trying to remember an old application I used that printed
out multiple
text files (and html pages are kind of like text files). But
my mind is
flubber today. If I think of it, I'll post it.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"-m-@v@-m-" <[email protected]> wrote in message
news:fcs58e$f9b$[email protected]..
> by using acrobat pro you can "grab" an entire site into
a PDF... then
print
> the PDF
>
>
> "briz26" <[email protected]> wrote in
message
> news:fcs1vl$b13$[email protected]..
> > Hi All,
> >
> > Is there a way to print the code of an entire site,
not just each page
> > individually?
>
>

Similar Messages

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

File, create PDF, from web page, entire site...questions

I am new to adobe, is this the proper forum for Adobe Acrobat 9 Pro for macintosh? I think yes...
Created a PDF from: File, create PDF, from web page, entire site.
Is there a way to print this without the background color? If you printed from a browser, you could choose not to print the back ground color. I know exactly the color.
Is there a way to make this PDF look like the web, with no page breakes? I have tried various things, but the page breaks are always displayed.
Is there a way to create bookmarks on somthing other than the title tag in the web site? The title tag is an SEO 1 sentence summary of the page, which makes for very long book mark names.
Thanks for your help.
bob
www.answerstat.net

I don't use v9, but what I would do is click the FILE--PRINT option, print to PDF, and enter to print one page (default is first page)

Not publishing entire site with all pages from site studio Designer

Hi,
I have created the site with one primary page & one secondary page in the site designer. I must admit that they don't have link to each other. When I publishing this site using Oracle Site studio publishing utility to a subscriber, it is publishing the primary page as index.htm in the destination. It is not pulling the secondary page. But i would like to get the entire site including the secondary page. What needs to be done to get the entire site. If you have any idea, please let me know.
Any help would be appreciated.
Regards & thanks,
Nirmala Vijaya Sekhar Varre

Hi
One way is setting a region in secondary as 'set replaceable' and geting ssURL from the code and link them in primary page.
Thanks
Srinath

Most reliable way to find site code in powershell

Hi,
Is there a reliable way of finding the site code for a ConfigMgr 2012 site in powershell?
Something like a consistent registry key or a some other way. I did think of looking up the share SMS_sitecode but wondered if there was a better way?
Thanks in advance.

Cheers, you're very welcome.
Here's a link to the entire cmdlet reference:
http://technet.microsoft.com/en-us/library/jj821831%28v=sc.20%29.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Printing with user codes on an INFOTEC 2245 network printer

I am trying to print over a windows printserver to an INFOTEC 2245 network printer, using samba. Though I can download a printer driver, there is no possibility in system preferences to specify a user code, needed to get access to the printer. Any suggestions would be very much appreciated.

foow wrote:
using consecutively the manufacturers driver,
If you used the INFOTEC driver from their web site, you will need to run the following command in the Terminal (/Applications/Utilties):
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">sudo chown -R root:admin /Library/Printers/RICOH/</pre>
This assumes that your printer has the PostScript option installed. You can then enter your UserCode under the JobLog section of Printer Features in a print window.
the Gutenprint driver and the generic Postscript driver. No joy.
Neither of those drivers contain options to set user codes.
What puzzles me is that I can print to that printer, with user codes, using CUPS and Samba under Linux. I also tried to use the Linux PPD, or the part relating to user codes, in the OS X PPD, but that did not work either.
There are two PPDs for use on Linux. If your printer has the PostScript module installed, you could use the PostScript PPD from http://openprinting.org/foomatic-db/db/source/PPD/Infotec/PS/Infotec-IS2245PS.ppd
Enter your user code under Printer Features > Feature Sets: JobLog
If your printer does not have the PostScript module installed, you can use the pxlmono drivers from http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/pxlmono
I probably have to conclude that the drivers that are accepted by Snow's CUPS do not provide for user codes at the moment.
There should be no problem getting UserCodes to be accepted -- at least with a direct connection bypassing the Windows print server.
Matt

Adding Multiple files to many Sharepoint Sites based on the Sites Code (Splitting the data using a code)

Hi,
I'm pretty new to Sharepoint and wanted to ask a question to see if it can actually do what we need it to do.
We would have a top Site within a collection and under this we would have 400 sites for different sections of the business (External) Lots of teams create documents for all these sites and use the Code of the site in each document so we know what business
site its going to. For example 67890_BusinessReportMay.docx We know this document should be heading to site 67890
We have lots of services sending data to these 400 business sites. If we were to do them manually it would take most of our time to go to each site and upload the documents, even if we could do all the sites documents in 1 multiple upload. We still have
to go to each site to do it
Is there an easy answer to this? At present I have folders to match each of the 400 Sharepoint Sites and I use an Integration Services package to move all the documents into these 400 Matching folders. I do this using the Code at the start of each file name.
If it doesn't have a code its put into an error folder and reported back on.
Then I want something to automatically go through each of these folders and load them into the Sharepoint Sites document libraries.
OR
Say you have 600 files all going to the 500 sites on Sharepoint in one folder. The File contains meta data regarding the Sites Code. Using this you can split the files and automatically pull them across to the Sharepoint Sites without having to go
into each Sharepoint Site?
I'm thinking that you cant do this and I'm hoping I'm wrong. Any help would be greatly appreciated.
Debbie

Hi Debbie,
According to your description, my understanding is that you want to move the documents to different sites based on the code in the name of the files.
I recommend to create workflow and set the workflow to start when an item is created to achieve this goal.
As there is no built-in action which can move the documents cross site, we need to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps in the link below to deploy the custom activity to SharePoint:
http://social.technet.microsoft.com/Forums/en-US/82609160-152f-461a-9a19-0e996f5a309b/sharepoint-2010-archiving-the-files-from-one-document-library-to-another-document-library-in
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a column in single line of text type(called NO for example) in the library where the documents are uploaded, and input value manually in the column to store the code when uploading the documents. (We can also use workflow to extract the code from
the name of the documents if the codes are always 5 numbers.)
Create a workflow associated with the library and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: NO equals 67890.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at site 67890 URL.
Select Delete Item, change the settings to be Delete Item in Current Item.
Create other conditions from step 3 to step 5 to copy the documents to different sites and delete current documents.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How do I add music to play on my entire site?

Hi!!
Pretty green at this stuff so bear with me!!
Designing a website for my small business and would LOVE to add music that could play through the entire site rather than on the page the media is placed on.. does that make any sense to anyone?
Thanks Much!!

Did you try the method described in my demo page?
Note: Internet Explorer and Firefox often have problems with images with reflections. This tutorial describes how to easily convert the image and it's reflection into a single jpeg file: #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single JPG Image.
Message was edited by: Old Toad

How do I change the assigned site code on a REMOTE client via WMI (C#)?

Hi
I was wondering if it is possible to change the site code on a client remotely via WMI. I have found one or two links to this, eg
http://msdn.microsoft.com/en-us/library/jj874135.aspx
and
http://social.technet.microsoft.com/Forums/systemcenter/en-US/67b671bb-4819-4e7a-a4f6-6cb7ded17722/sccm-2007-change-assigned-site-code-on-clients?forum=configmgrgeneral
However none of these will allow me to change it remotely directly from my machine. I have written a tool which fixes many issues but having difficulty with this one. In the past I have even resorted to copying a script remotely to an affected machine then
setting a remote scheduled task which executes the script. This was effective but very dirty! I find it difficult to believe there is no way to do this directly but can't seem to find anything suggesting it is possible.
Before anyone replies with a 'what are you trying to achieve...' type answer, I have a similar situation to that of the guy in the second link but I would like something more instant.
Many thanks

psexec or winrm will allow you to do this.
Jason | http://blog.configmgrftw.com

How do I get my entire site to come up when someone clicks search results of just one page of my sit

When someone searches for my site in google, sometimes only one page of my site comes up. If they click it, they may only get my menubar, or a page, such as my calendar page without a menubar or topbar. How can I make it so when they click the link my entire site comes up. even if the search they did just lists one of my pages? Help... Thanks

Are you using FRAMES?
If not, you need to post a link to your site.

Can I publish one page at a time to the ftp when publishing entire site?

I am currently using iweb to manage my website and i changed a number of pages and require to re-publish the entire site. When i go to do this it attempts to bundle all the files together and publish, but the site only allows for 8 connections via ftp. Is there a way that when i publish the entire site that i can publish one page at a time?
Thanks for your help!

Publish your site to a local folder...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... and upload the files using an FTP application...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
That way you can upload individual files and folders - one at a time.

Settings in program RFF0GB_T for printing the company code address?

Hi All,
I want to print the company code address in the header window of the sapscript. I copied the F110_IN_AVIS to Z .
in the Program RFF0GB_T, the structure SADR whose fields are being used gets filled up if the finaa-nacha = 2 means of Fax type.
How do I change the settings or change in the program to change it to make it to print?
Please help
Rgds,
Madhuri
Edited by: madhuri sonawane on Dec 24, 2008 10:06 AM

Hello Chandra,
FYI, plz check the code. As per your stmt the config will populate the structure SADR. Plz see the code & clarify how & where the config comes into play.
INCLUDE RFFORI06.
PERFORM avis_schreiben.
FORM avis_schreiben.
IF finaa-nacha EQ '2' AND finaa-formc NE space.
    PERFORM adresse_lesen USING t001-adrnr.
ENDIF.
ENDFORM.
INCLUDE RFFORI99.
* FORM ADRESSE_LESEN                                                   *
* Lesen einer Customizingadresse (z.B. Buchungskreisadresse)           *
* Read customizing address (e.g. address of company code)              *
* ADRNR - address number                                               *
FORM adresse_lesen USING value(adrnr).
PERFORM addr_get USING 'CA01' adrnr.
ENDFORM.
* FORM GET_ADDR                                                        *
* Lesen einer Adresse                                                  *
* Read address                                                         *
* ADRGR - address group                                                *
* ADRNR - address number                                               *
FORM addr_get USING adrgr adrnr.
CHECK adrnr NE sadr-adrnr.
CLEAR addr1_sel.
addr1_sel-addrnumber = adrnr.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr1_sel
      address_group     = adrgr
    IMPORTING
      address_value     = addr1_val
      sadr              = sadr
    EXCEPTIONS
      OTHERS            = 4.                                "SADR40A
IF sy-subrc NE 0.
    CLEAR sadr.
ENDIF.
ENDFORM.                               " GET_ADDR
If you still think that SADR is populated through config, can you tell where exactly in FBZP do you config this ?
BR,
Suhas

[SCCM 2012 R2] Re-using site code

Hi All,
I have a situation where I need to uninstall SCCM Primary Site because of wrong server name convention. SCCM 2012 documentation do not mention of reusing site code after previous site uninstallation.
Is it possible to use same Site Code for new primary site after uninstall old one?
SCCM 2007 Documentation: Site codes should never be used more than once in a Configuration Manager 2007 hierarchy for active sites. If you have uninstalled a site that was publishing site data to Active Directory Domain Services in preparation for installing
a new Configuration Manager 2007 site with the same site code, you should ensure that the previous site's information has been removed from Active Directory Domain Services, and possibly WINS, before use the old site code for a new Configuration Manager 2007
site. All references to the original site need to be removed from all other sites in the hierarchy, and you need to clean up any objects previously replicated to potential child sites of the new site. If this is not done, any newly replicated objects from
the newly created site could overwrite objects already replicated to the child sites by the previous installation.
SCCM 2012 Documentation: Site codes cannot be used more than one time in a Configuration Manager hierarchy for a central administration site or primary sites. If you reuse a site code, you run the risk of having object ID conflicts in your Configuration
Manager hierarchy. You can reuse the site code for a secondary site if it is no longer in use in your Configuration Manager hierarchy or in the Active Directory forest.
Thank you in advance.
Regards,

I have a CAS (CAS) and One Primary site (AU1) connected to CAS.
I want to install second Primary site (EU1) connected to same CAS (CAS). Server name for EU1 Primary site is wrong and guys that are higher in hierarchy than me want from me to fix the server name.
Reason for everything is always: Politics
So you know that you are begging for trouble by having a CAS. You do also know that all the administration should be done ONLY on the CAS and nowhere else.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

I am an artist who built my site on iWeb 08. Although I have easily been able to transfer to Godaddy, my ability to publish is limited. I must upload my entire site and it is time consuming. How do I convert to iWeb 09 and is this easy to do?

Help! I am an artist who had my site professionally designed on iWeb 08. Although I have been able to transfer to Godaddy, my ability to publish is limited. I must upload my entire site and it is time consuming. I was advised to update to IWeb 09 (which I could get, I think? from Amazon) because it has a built- in option to publish to any FTP. How do I convert my 08 folder to an 09 folder? Will it convert correctly? I know eventually I will need to rebuilt the site, but I would like to use this option for awhile to buy time. Is this feasible? I currently own a Mac Pro.

Its just a question of installing the later version of iWeb from the iLife disk and opening your website in that version. Its a good idea to have a backup of your Domain.sites2 file before doing this. See this page for its location...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
Publishing settings are shown here...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
If you are using Lion/Mountain Lion, see this page for more info...
http://www.iwebformusicians.com/iWeb/mountain-lion.html

HP 6110 All-in-one no longer prints...print jobs sit in queue

My printer worked fine last week and now I went to print somethign and it just sits in queue. I tried uninstalling/reinstalling the drivers, running the HP Diagnostic (which says everything seems fine) but nothing prints. Any ideas on how to get this working again? I also tried to print on my other laptop and that doesn't work either - so it's not an issue with this particular computer.
Any ideas would be greatly appreciated!

I have a similar problem but only with my vista pc. All print jobs sit in the queue, don't print. No problem printing on my mac. Please jhelp!

Print Entire Site Code

Similar Messages

Maybe you are looking for