Print fails on OS 10.9.4 but not OS 10.9.3?

I'm using Adobe reader 9.5.5 on both OS 10.9.3 and OS 10.9.4. On 10.9.4 the print command insists on using the back tray and print in a funny format (like for a 4x6 print). The cassette tray is set for plain paper and paper size is 8.5x11. If there is a screwed up setting I can't find it.
It all works fine on OS 10.9.3.
Chuck

Try reseting the print system
OS X Mavericks: Reset the printing system

Similar Messages

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so no wifi conection.

HP Photoprinter C7280 printer. The wireless radio is on but not functioning - so am unable to gain wifi connection and print! - Why? How do I fix, Thanks

I would guess that the printer's wireless radio has died. Have you tried plugging the printer into your wireless router with an Ethernet cable? It should work and give you the same functions as wireless. Your computer or router will not care how the printer is connected.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

HT4356 I can print from other applications on my iPad but not from Dropbox

I can print from my iPad using other applications but not Dropbox

Is your printer one of the models listed here: http://support.apple.com/kb/HT4356

E-print works on some e-mail address, but not others?

HP Officejet Pro8600
Windows 7 Ultimate
error: "550 5.7.1 Command rejected"
I am able to send and print e-mail print jobs from @hotmail.com and @live.com addresses, but not from @q.com (a Century Link primary domain for customers, not a corporate account). I have set up "Anyone can send ePrint jobs to this printer." These failed print jobs never appear in the ePrint Center listing of Recent Print Jobs. I have tried sending via Outlook 2010 and via the Century Link web based e-mail application -- they both return to me as bounced messages. What's going on here?
This question was solved.
View Solution.

There are certain email clients that are supported for ePrint. I included a screenshot of supported clients. Also, I am adding a link for helpful information about ePrint.

HP Officejet Pro 8500- prints wirelessly from one computer in network but not the other

I can print wirelessly from my laptop, but not my desktop. The printer shows on the list, checked as the default, and READY, but document does not seem to find its way there. It never shows up in the print queue.

Download and run this utility. It should indicate what is wrong.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Slug and bleed print fine from Acrobat 9.5.3 but not Acrobat 9.5.4

Our creative department is having issues printing slugs from Acrobat.
(slugs were created in InDesign CS5 and exported to pdf)
There are NO issues printing form Acrobat Pro 9.5.3.
Ther ARE issues printing from Arobat Pro 9.5.4.
The slug and bleed shows up in the print preview screen but does NOT print.
Does anyone have any advice or solutions?
Thanks!

Did you ever figure this out? One day I was printing slugs a few days later acrobat was not printing them, even though they show in the preview. Help?

Duplex print setup error - Namespace prefix 'section' used but not declared

Hi All, I am getting the below error while trying to preview as PDF document. The issue seems to be caused by adding the below to form field in the rtf template (removing the below i can view the PDF document but it does not work as expected ie printing the terms and conditions to back of the page)
<?section:force-page-count;'end-on-even-layout'?>
Error::
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'section' used but not declared.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 15 more
FYI: I have been using the below link as example
http://blogs.oracle.com/xmlpublisher/2007/10/here_are_my_terms_conditions.html
Also reviewed the following link too apart from reading the user guide
http://winrichman.blogspot.com/search/label/BI%20Publisher%20Last%20page%20continued
Thanks, Maha

Hi Maha,
I have used the <?section:....?> command a few times, and I think it has to be enclosed within a <?for-each@section:.....?> loop. If you are still having issues, then upload your template and sample XML somewhere and I can try to take a look for you.
Regards,
Cj

Mac 10.6.3 with Firefox 4.0.1: Can print from Word, PDF, Screen Shots, etc.--but not a web page. My Canon MP610 shows correctly as default printer.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

If I use AOL's browser, I can print Web pages. But not from Firefox. Could be this problem began with upgrade to your 4.0.1.

I use Photoshop Elements 11 to print panoramas. Works for jpeg images but not tiff. Suggestions?

I use Photoshop Elements 11 to print panoramas. It works for jpeg images but not for tiff images. Seems strange because PSE11 manages tiff images in all other processes. Anyone fared better?

Thank you for your trouble.
My images are not usually layered and the particular case I am about to quote, it is not. The dimensions are 10,546 x 2,790 and the image has 16.7 mbs. I use 8 bit colour. When I set up the print screens for tiff, everything is normal until I get to the last screen with the image set upon the photo paper. Then the paper size indicated with the image refuses to budge from the A4 size, so the panorama gets printed on that. I consulted the Adobe chat line and the expert could 't get it to work either. So he came to the conclusion that the tiff capability had not been extended to printing panoramas. In seeking advice, I thought someone might refer me to an updating patch!
Well done! You have confounded the system! I could not find any control that would override the setting.

Can print to shared Canon iP4300 via Bonjour - but not with Canon driver

I've searched the forums and therefore know roughly what the problem is, but still need some concrete info please...
Have finally managed to share my Canon iP4300 connected to iMac (10.5.2) via USB and print to it from XP, using Bonjour for Windows. However... when I run the printer assisntent it finds the printer but only offers me the choice of a generic driver. The driver turns out to be labelled "HP Color LaserJet 4550 PS". A postscript driver?!? Well, it works, but I'd really prefer the proper Canon driver (which is already installed - I previously had the printer connected to the PC).
Yet, when I select this driver retrospectively (from the printer-share properties dialogue), I cant print. This, if I understand correctly is because the Canon driver doesn't support Bonjour?
So is there anything I can do? Eg. I've read about the Gimp drivers, but they're only for OSX right?
Maybe this generic "HP" driver will be adequate (haven't printed anything properly yet) but would like to know if anybody has suggestions other than contacting Canon (which I will do anyway).
Cheers

I Have the same Problem as you,
I Have the Canon MP180, and i have the driver on my windows XP Laptop
But when i try to connect to it, using Bonjour (as the printer is connected to the mac) it uses a HP Color LaserJet 4550 PS driver even though its Canon
Does anyone know how to use the proper driver.
It works ok using the HP Driver, but the quality of the printouts from the windows XP laptop seem rubbish
Many Thanks
Alex
P.S if you got this working, can you send me a message back.

My Epson XP-710 Series, printer/scanner: I can see the drivers but not the software - where is it?

Just bought the above. When I read the instructions, it tells me to go to Applications, and click on the software. All I have in Applications is the driver. I cannot see what Epson says I should have, ie, colourful screens to use. I downloaded the drivers from Apple, as Epson was !!!!! Any ideas anyone? Trying to scan an application form to see if I can fill-in as opposed to using my pen. I can't even find out if I can do this. Help.

Hi Bratman91 and Greg
I am now losing my sanity over this darned machine. I have now done as follows: 'EPSONPrintDriver2.18.dmg' for OS X Mavericks was downloaded from Apple. I clicked on this in Downloads & then this led to 'EPSONPrinterDrivers.pkg' opening, which led on to installing the Epson Printer Software. Apparently as per Epson and Apple I should not be having such a hard time. Yes sure! I gave up on the disc that came with the printer; Apple does say this though. I did as described but to be honest printing and scanning does not have the look of WOW. It all looks grey/brown and drab. Epson web makes it look so wonderful and easy. I may not have needed to download the 2 as described; any ideas? Maybe just one would suffice?
Re: image capture. I though this was from Epson, but apparently it is from Apple. I use this icon to access scanning, but it is so laborious. It takes a while after clicking the Epson icon within it, for scanning to start. If this is the Apple option, can't I use the Epson option (if there is one). I can go into Printers and Scanners in my mbp and I see the same. Is image capture the same as scanning via Printers and Scanners? So many Qs; sorry.
Any idea how I can print in draft? This comes in handy sometimes, but when I do see the slider which looks likes I can move said slider, it won't ever slide to draft, no matter what type of paper I chose, eg, photo, plain paper etc. Any ideas? The opportunity exists with the slider, but it won't stay on drafts. Thanks in anticipation of any further advice. Helen

Unable to print from the browser, for example: in my amazon account, i am unable to print shipping lable by hitting "print" button. It worked in IE, but not now.

I used to be able to print from the browser, specifically Amazon...hit print and I would get the print/preview from windows. In IE it worked perfectly, but IE start messing up and grinding to halt, taking MINUTES to load a page, like dial-up!
Firefox is fast and runs great....just cant PRINT..grr.
also... noticed that i am unable to read my online paper now. Paper will open, i can read the full page view, but when I try to hit a particular article to enlarge in another popup window, nothing happens. perhaps a security something preventing popups? but there is no option to do otherwise.
again, was able to read articles in IE.
Am I missing an add-on?

I too developed the same problem about 2 weeks ago. First in Safari then Firefox. I have 2 printers, one local and one networked (different brands etc). Neither browser will print ANYTHING from the web to either printer. Jobs are not stuck in queu - goes to printer but just spits out blank paper. Not even email. No pop-ups involved (like the usps site). Not website specific. All other applications on the machine print perfectly to both printers.

Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02     Code: 0xC0024107
Source: Load File to Staging      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.

I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent

HP LJ4mv wireless printer worked with OS 10.5.5 but not with 10.6.3 - help!

My ancient HP worked with 10.4.11 and 10.5.1 thru 10.5.5 wirelessly. With 10.5.6 thru 10.5.8 installed, the printer did ot work and only the Adobe printer appeared in the Printer/Fax setup. With 10.5.5, I was experiencing random horizontal gray lines, polygons with gradient colors (cyan and magenta) flashing on and off and smeared dialog boxes and drop down menues. So, I upgraded to 10.5.8 and lost the artifacts and my wireless printer. All drivers are current (Software Update delivered/installed updated drivers today.)
10.6.3 is now installed and I still do not have a wireless printer. The Adobe PDF printer pops up and in the Printer/Fax dialog, it indicates "Kind" as HP LaserJet 4V/4MV Postscript. The Default button is active but all other buttons are grayed out and my printer does not appear.
Summary: the printer works, the wireless router works and the drivers are current.
Q. How can I get my wireless printer back? I need it badly.
Thanks.
Leonard

Kappy, thx.
The driver that is appearing now with the Adobe printer worked fantastically with 10.5.5, HP LaserJet 4V/4MV Postscript. This is from Apple, I believe. My printer does not show up when + is selected in the Print & Fax dialog and the Printer Name/Kind list appears. Only the Adobe is there.
I d'l'd/instld the Gutenprint. I cannot select it until the printer appears in the Printer Name/Kind field.
What is SL? :S
Greg, thx.
The printer is cat 5 to the ISP's wireless router and I am wireless. This has always worked up to 10.5.5. I incrementally d'l'd os upgrades 10.5.6, 10.5.7 and 10.5.8 and found the printer would not appear when I tried to add it. With Leopard, up to 10.5.5, my printer appeared automatically and I just had to make a selection from the "Print Using:" drop down.
Bruce, thx.
AppleTalk was a part of the setup and in 10.6, I cannot find AppleTalk. So you may be right about the IP route. Would Apple change this in the middle of Leopard with 10.5.6 (it worked up to 10.5.5) and not with 10.5.0 or 10.6.0? Would there not be an announcement that AppleTalk printer support was ending? No one in these forums knows that AppleTalk printer support was ended (I first posted in the Leopard forums)?
Sorry for the skepticism. I just did not think this was a possiblity but maybe you are right.
Is there a way to get an Apple reading on this? Should I set up a print server for wireless access? Any other suggestions?
Thanks again all. I much appreciate your help.
Leonard

Print fails on OS 10.9.4 but not OS 10.9.3?

Similar Messages

Maybe you are looking for