Print & Fax output need advice

Hi all,
We are using a print output which is partner independant output.We dont assign any partner function for this.As of now only print medium is maintained in the processing routine.
My req is I want to use this output as print as well as fax output henceforth.The fax should go to Sold to party.The fax number is maintained in the sold to party master record.
I maintained fax meduim in the processing routine and have not maintained the partner function as this output is already a partner independant output.
After maintainig the condition record if the create the shipemnt docuemnt the system is not pulling the fax output.If I remove the indicator partner independant output and maintain the partner function for fax then the fax output is determined automatically in the shipment document.
Is there any way that with out partner fucntion I can pull the fax output automatically in the shipment docuemnt
REagdrs'
Mano

Hi
1 ) i understood your requirement but with out partner function it will not work any out put eaither print,or fax mail what ever. i am talking about standard sap.
2) custom dev we have to check with "ABABER"
i hope you have understood
Thanks

Similar Messages

  • Lost connection between Power Book G4 and Brother Printer/Fax.  Need help.

    I am a new Mac user and until recently had a successful wireless connection to the Brother printer/fax. Address # 192.168.1.100 While printing a job I ran out of ink. I turned the printer off to replace the cartridge and lost the connection to the wireless powerbook. The printer works because it prints jobs from the PC that it is connected to by wire. So far I have clicked on "system preferences", clicked print and fax, Clicked + ato add printer and put the address in. Nothing is working. The message says, cannot connect to printer. I need serious, detailed help. My husband connects everything and gets it running and he just left for Iraq! Thanks so much!!

    Hello! In the printer setup utility choose "show Jobs" and see if you can click on "start jobs". It's probably gotten stuck because it ran out of ink. Tom

  • USB Flash Memory Problem with Windows printing...need advice

    I recently traveled from the US to the UK with my G4 12" powerbook. In order to print a document (MS PowerPoint), I had to copy the document to my flash memory stick (AVB is the brand which I bought because it's skinny enough to also allow me to use a mouse), put it into a Windows machine's USB port in the hotel business center, and then print from that file.
    I had all kinds of problems, where the file would disappear from the memory stick, (and in one heart-stopping moment, from my PB desktop!). I finally borrowed another stick and got the job done, but I don't want to go through that again.
    Amy idea as to what happened, or more to the point: What is the "best" brand/type of memory stick to go between Macs (I'm on Tiger)...and Windows? (I only need a 256M capacity; I have small files, but don't mind going bigger if it's more reliable).
    Or should I give up on a stick and buy a USB portable hard drive? Or is there some other, better, more reliable solution?
    Any suggestions would be very much appreciated.
    Thanks, Writerdog

    I think you're right it sounds like an electrical sound
    if you want to change the motherboard like sea dog said look at the MSI catalog to find the one that suits you the most >>HERE<<
    personnally I don't know the prices ine Danemark (I buy everything in France) so if you have a link i can try to help,
    if it was up to me would take the Z77A-G45-Gaming or GD65-Gaming but if you prefer the normal series i would say GD-55 or GD65 it depends on the prices
    PS: for ethical matters i can't speak about other companies in the MSI Forum

  • Need advice on a proof printer

    Hello. So glad I found this site!
    I'm currently a print graphic designer and starting a home based business integrating my print design knowledge with newly acquired web design skills to offer a complete package.
    I am working on an HP computer, as I cannot afford the Mac I want now. I have all of the Adobe software for PC already, but need advice for a printer.
    The machines I work on now are like $18k - 25k color lasers, and clearly that is not in my budget. I'm a little lost as to what to look for in a printer that can handle color proofs of my artwork. I create a lot of raster images in PS, but logo design is one of my focuses, so vector output is essential. I almost always create outlines of fonts for the final press ready file, so I'm not so worried about fonts, but color matching is important.
    I've been reading about Postscript and PCL, but am still very confused.  I'm also a little confused as to what a rip does or if I need one.  We use one at my shop, and I know how to use it, but it lives on the server and was explained that it was only necessary for networking the printers.
    I am planning to outsource all of my final printing, but I need a printer for proofing. I've been looking at inkjets for affordability reasons, but now I'm not sure if I need a color laser.
    Help!!

    Dear VectorGirly,  I currently have an OKI Postscript c9800 printer. I use postscript printers because I calibrate and use color profiles to get the closest colour match to the outsourced commercial print that I can. I know this is more than you budgeted for, but it really depends what you end up focusing on. (ie web or print). I focus more on print, hence my printer has to proof postscript correctly for me. I am PC based but my files print to both PC and Mac platforms.
    Regarding logos and colors ... firstly, my monitor is calibrated with a Pantone Huey. I use matching color profiles in all my design programs: Indesign, Illustrator, Photoshop. My print PDFs include the color profiles. When I email or post proofs of logos or corporate stationery to clients I make sure they understand that colors will look different on various monitors because they are not calibrated for print and are RGB or color prism based rather than CMYK for print. Even if you choose a Pantone color, unless everything is calibrated and with color profiles, it's unlikely that you will get the same color on your screen, let alone on the client's screen. And if the client is wanting a color that looks good on their screen, it's even harder. I always recommend they look at the proof colours on various screens including friends so they can understand how it changes according to monitors.
    Regarding PCL and Postscript: When I purchased my OKI (and my former Fuji Xerox pscript), I sent an existing print PDF (that had gone to commercial print previously) to the head office and asked them to do printouts of all the printers I was interested in. All the printers based as PCL were very inaccurate color. The two with postscript took my PDF and printed correctly and were very close to the final printed output. As I am pedantic on colour (colour in Australian spelling), I had to choose the high end postcript laser. Having said that, I am also very interested in the Fuji Xerox Phaser 8500 which is postscript and solid ink (great for the environment and people with allergies and low running costs - much better than laser) - but I need the A3 and banner printing option and they haven't made one for that size yet. I am hoping the new release may offer a bigger size paper. I have a very high allergy level and have to have the window open and a mask on when changing toners and printing, hence my interest in the solid ink for the future.
    I always download my fonts through the print PDF to the printer - I never use printer inbuilt fonts. This is so I know that WYSIWYG (what you see is what you get) when I print commercially as they also download/use the embedded PDF fonts.
    Also, somewhere down the line you may find yourself forced to choose between focusing on web and print.
    I recommend you choose what you love best.

  • Repeat output (through Print/Fax/Email)

    Hii All
    Our client has a requirement where we are looking forward for a functionality through which we can  reprocess the billing output types through the print outs.
    For eg. If for an invoice output has gone through EDI mode, then there we should have a functionality where the same output can be re-triggered but the output medium should give option for printer/email/fax.
    I tried using transaction VF06 but thorugh that i can only reprocess EDI for EDI, printer to printer.
    Can anyone let me know what needs to be done for a repeat output through a different medium.
    Thanks & Regards,
    Gaurav Manocha

    Hi,
    My understanding about your requirement is as below:
    Your invoice has only one output type with EDI as it's transmission medium... right ? then you want to use the same output type wherein your transmission medium would be print/fax/email... right ? then I can say it is not possible... just b'coz you don't have output record for the transmission mediums print/fax/email for the mentioned output type.
    So, only option in my openion would be to maintain output condition records according to transmission medium you require and then repeat the output via VF31
    Hrishi

  • Need to print same outputs at different printers

    Is there any way we could have the output directed to a different printer. A sales order confirmation output needs to print at printer ABC for user Sam, and printer xyz for user Jude. What configuration change would allow printing of outputs at user specific printer.
    Any suggestions

    if it is printing immediately , yes it is possible. In the user profile( T Code SU01) have default printer assigned , which ever you want to print for specific user and click on output immediately. when  the order is saved then it will print to the printer maintained in the user profile.
    If batch program , then itwill be difficult
    Regards
    Sai

  • New user of G4 - need advice on selection of printer, DV and digital camera

    I am a recent convert to mac and need advice from experts on the following:
    I plan to use my G4 MDD primarily for home computing, experimenting with digital photography, create DVDs and explore multimedia primarily as a hobby. Please advice me on selection of a decent digital camera and or a DV camera. I am not sure if I have a decent DV camera - whether this will be good enough for still photos as well. My G4 has firewire ports.
    Also I am interested in buying a printer that I can use with my mac as well as connect to a two other windows systems. My printing needs are primarily documents and maybe photos.. I think that going in for a laser printer makes sense in terms of reliability .
    I am not looking for the highend equipment - willing to spend upto 750 $ on all items. Thanks in advance.

    raja,
    welcome to discussions.
    Digital Camera, DV camera and colour Laser Printer all for $750 ??
    I'm afraid you'll have to go for an inkjet printer if you want colour photos. Expensive doesn't even begin to describe Colour Laser Printers. HP make good printers, but tend to be a bit more expensive to run, Epson make excellent photo printers, are are a bit more economical to run, take a look at the iP4000 and iP5000. I still use my old HP DeskJet 1200 (does A3), and a DeskJet 970Cxi (everyday), both use the same cartidges. These are about 7 years old, there are modern versions retailing now at about half of what I paid for these then(always the case).
    Digital cameras can be decided by what purpose you intend to use them for. I have an 18 month old Nikon D100 digital SLR. 6M pixel (which was a lot then) but that might not matter, it takes Nikon lenses (and other manufacturer lenses to the same spec), so I can shoot with a 300mm, 400mm, 600mm lens. Nikon has a D50 out now, a cheaper, newer version of my camera. I can print A3 photo real from 6M pixels and with the right lens I don't need to crop my pictures too much. If you want to print photo real A4 (and that's a LOT of ink) a 3-4M pixel camera would be fine. Most cameras now are 5-8 M pixel, this is because the pictures they take have to be cropped drastically because they have an inadequate lens. On top of that my Nikon takes really great pictures, better than any of my other digi cameras (but not as good as my ancient Olympus 35mm muji-zoom compact with 200 film).
    So if you're going to take a lot of close ups in well lit areas, product shots, interior shots with flash, ie. "snaps" rather than photography, any cheap digi camera will do. Good points are
    - USB / Firewire connectivity,
    - non-proprietry battery technology, ie. it uses 4 x recharable AAs instead of a battery that only fits that camera, and it comes with a AA recharger.
    - non-proprietry storage technology, ie. it uses Compact Flash or some other that is used by a large portion of cameras, rather than just be that manufacturer.
    - digital zoom is worthless.
    If you're doing outdoor photography, wildlife, landscapes, etc, you may want something with a changeable lens and SLR technology, a digital SLR. Not all digital SLR cameras have changeable lenses. Same good points as above, but be prepared to sacrifice one of the points for a good camera. Heavy cameras are easier to hold steady with a big lens, so try for a metal case (it'll be coated in plastic anyway).
    For outdoors the most important thing is the amount of light entering the camera (indoors you can control the lighting with flash / fitted lighting), digital SLRs can have enormous lenses (my 28mm hyperzoom lens has a 72mm diameter), compare this to a compact digital camera with a 12mm diameter lens, I take 36x the light of a compact. And it shows in the picture quality.
    I'm a complete duffer with DV cameras so I won't lead you astray with this, but be aware some do offer the option to take digital pictures. Indeed some digital cameras can take low quality short movies.
    Let us know if you have any more questions.

  • Attachment Print along with xml output - Need help !!!

    Hi,
    I have a existing report which prints a Job details. The parameters are
    1. Job From
    2. Job To etc..
    So if the program runs, it creates and prints the output
    For Job No 1
    Job No 1 ... details
    For Job No 2
    Job No 1 ... details
    Now the requirement is to print the attachment associated to the job (present in FND_LOBS.FILE_DATA) just after the specific job finishes.
    Required output
    For Job No 1
    Job No 1 ... details
    Job No 1 Attachment (can be in pdf/excel/image etc) -- Not sure if I can do this by calling sub-template.
    For Job No 2
    Job No 2 ... details
    Job No 2 Attachment (can be in pdf/excel/image etc)
    Any Clues !!!!!!!!
    Thanks,
    Neil

    Hi Neil,
    I have also got the same requirement to print the content of the attachment after printing the job details.
    If you have got soultion for this, it would be great if you could share the solution since the requirement is very urgent.
    Thanks a Lot.
    Gowri.

  • Problem with SAP Script FAX output

    Hi Friends,
    I have problem with SAP Script Fax output.
    After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
    How do I rectify this problem? I need correct alignments in both form display and list display.

    Hi Sasidhar,
    Have you tried with different fax machine.
    Regards,
    Atish

  • Need advice on on a Mac Pro 1,1 Media Center

    I currently have a 2009 Mac Mini running as my home media center, but I recently came by a FREE Mac Pro 1,1 and have decided to repurpose it as my media center so I can migrate my Mac Mini to my bedroom TV where it will live an easy life doing nothing but run Plex Home Theater, Netflix, and EyeTV. This machine falling into my lap was also quite timely because my 4-bay Drobo is running low on available expansion and another Drobo isn't in the budget at the moment.
    This vintage mac pro is running Lion 10.7.5, has 1 old and crusty 500GB hardrive, dual x5160 processors, 4GB RAM (one stick i'm pretty sure is toast judging by the red light and the kernel panics), and the standard NVIDIA GeForce 7300 GT 256MB graphics card. It will be used primarily for the following: network storage for iphoto and itunes libraries, streaming video, Plex Media Server & Plex Home Theater, and Handbrake encoding. I also have a goal of safety of data for my movies, photos and music as this machine will supplement my current Drobo storage.
    My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
    Here is where I need advice because I am not very familiar with RAID and the differences between hardware or software raid. Am I better off getting four drives of the same size and setting them up as RAID 5 (I think) using Apple's RAID utility or should I throw in three 1TB drives and then install a fourth 3TB or 4TB drive as a Time Machine backup for the other three?
    Should I upgrade the OSX to the technically unsupported latest version? Or is it not worth the trouble for this application?
    Also, is there any benefit to upgrading the graphics card to the ATI Radeon 5770? Would this yield an improved image quality? I am outputting to a Denon AV Reciever and subsequently to a 100" projection screen, if that makes a difference. I also noticed the 5770 has an HDMI port, wich would be nice, but not necessary since I can use a DVI converter and woud still need to use the optical audio out anyway.
    Much obliged for any input

    My plans are for a 128GB SSD boot drive installed in one of the PCIe slots and then to load up all 4 of the 3.5" drive bays with WD Green hard drives. I have also ordered 4GB of replacement RAM, so upon removal of the faulty unit I will have 7GB.
    PCIe cards that use or support SSD are not bootable until you get to 2008 (and that is limited too).
    Green are not suited for any form of array unless say NAS and WD RED.  Better option would be 3 x 2TB WD Blacks in a mirror, and too many people only use two drives, well 3 is much easier safer and works better. Might want to invest in www.SoftRAID.com product even.
    Best price and quality, got my 1,1 with 8 x 2GB (ideal is 4 or 8 DIMMs)
    2x2GB FBDIMM DDR2 667MHz @ $25
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    With price of 250GB SSD $155 I'd go with that or stick with $89 for 128GB .

  • Very Urgent! Print Report output to local printer on button click in form

    In Sales Order Form there is a print receipt button. In current situation On Clicking the 'Print Receipt Button' it submits a XML Publisher report(PDF output) to the concurrent manager. Currently to print that report i need to go view--> requests--> view output and then print. According to my new Requirement i need to print that report directly to local printer on one simple Print receipt button click in form.
    I am trying to call the printers on server using custom.pll. The report is running successfully but it is not printing output to the local printer. I need to print the report to the local printers based on responsibility. Local printers are available on apps server. Can anyone help me on this issue ASAP.
    Is it possible to print the document using custom.pll? Is there any other alternative to print the report on simple button click in form.
    Environment: Apps 11.5.10.2, Forms 6i
    Here is the code that i am using in my custom.pll.
    if (v_form_name = 'OEXOETEL' --and v_block_name = 'LINES_SUMMARY'
         and name_in('parameter.ACTIONS') = 'PAYMENT_RECEIPT' )THEN
    l_organization_id := Name_In('PARAMETER.OE_ORGANIZATION_ID');
    l_order_header_id := Name_In('ORDER.header_id');
    select to_number(oe_sys_parameters.value ('SET_OF_BOOKS_ID')) into l_sob_id from dual;
    xml_layout := FND_REQUEST.ADD_LAYOUT('XXAFP','XXAFPOEXPMTRCRTF','en','US','PDF');
    select a.profile_option_value
    into v_printer_name     
    from fnd_profile_option_values a
    , fnd_profile_options b
    , fnd_profile_options_tl c
    , fnd_user fu
    where a.profile_option_id = b.profile_option_id
    and c.profile_option_name = b.profile_option_name
    and fu.user_id (+) = a.level_value
    and c.language = 'US'
    and c.user_profile_option_name='Printer'
    and a.level_id = 10003 ;
    if (FND_SUBMIT.SET_PRINT_OPTIONS(v_printer_name, 'Portrait', 2, TRUE, 'N'))
         then
    l_new_request_id := FND_REQUEST.SUBMIT_REQUEST('XXAFP','XXAFPOEXPMTRC',
    null,null,FALSE,l_sob_id,l_organization_id,NULL,NULL,l_order_header_id,
    chr(0), '', '', '', '', '', '', '', '', '', '',
    end if;
    fnd_message.set_string('Request Submitted for Custom Payment Receipt. Request ID is '||l_new_request_id);
    fnd_message.show;
    copy('NULL','parameter.ACTIONS');
    IF (l_new_request_id = 0) THEN
    FND_MESSAGE.RETRIEVE;
    FND_MESSAGE.ERROR;
    else
    l_commit_result := APP_FORM.QuietCommit;
    END IF;
    I need to complete this requirement immediately. Can anyone suggest me better ways in doing this.
    Thanks,
    Srinivas

    I solved this problem myself using shell script through custom.pll. I wrote shellscript and called that shellscript through FND_REQUEST.SUBMIT_REQUEST.It printed 2 copies to local printer.

  • Any means to print the output from an abap report immediately

    Hi,
    I would like to know if there are any means to print the output of an abap program immediately. Our user wants to execute the program online and once the result list is displayed on screen, user wants the same list to be printed simultaneously without the need to press the 'Print' button.
    Thanks in advance for your help and advises.
    Francis

    Hi
      We can print the list while displaying using NEW-PAGE PRINT ON.
      below is the syntax for this.
         NEW-PAGE PRINT ON [NEW-SECTION]
                    [<params> | PARAMETERS <pripar>]
                    [ARCHIVE PARAMETERS <arcpar>]
                    [NO DIALOG].
    Regards
    Ramanjaneya Reddy.
    [email protected]

  • Error in FAX output

    Hi All,
    I am getting following error when I send the output to fax.
    Conversion from OTF to PS: Termination in C_RSPO_PROCESS_DIALOG, return code   128 Printjob not found
    Conversion from OTF to PS: Termination in SX_OBJECT_CONVERT___S_PRT, return code 1
    Message cannot be processed as it cannot be converted
    Need to know if the issue is with ABAP or its related to FAX...
    Need this urgently.
    Regards,
    Shahu

    This was issue with the test system environment.. when the same fax output was fired in other test evironment it worked fine...
    regards,
    Shahu

  • HP LASER JET PRINTER CM1415 FNW NOT PRINTING FAX

     Love this printer. Have it about 2 years. Had no issues until now. Faxes are received to memory but don't print.Can print fax from memory. Also can print from othewr applications,so printer is not the ussue. Why won't the faX  print on  receipt

    Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you're having issues with your print output.  I would like to help! Do you have any issues making a copy? I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

  • Help with Brother Laser Print/Fax

    My printer is mac compatible. I just got the new airport extreme and would like to use my brother laser print/fax via usb. it's not working and on top of it my print utilities application is missing. any advice? thx

    Just in case you missed it - double check to make sure your Brother does not have an ethernet (CAT5) jack on the back.
    I have 4 Brother printers or AIO units, and they all have that connection, and are all Bonjour compatible. Even my cheapie $99 AIO color inkjet.
    If you do have the jack, just plug in to the AEBS with an ethernet cable, and you may even find that it supports "scan or fax over network", in addition to being able to do all the other advanced functions.

Maybe you are looking for