Print Form using Output Type

Hey Guys,
Can any one tell me how can i Print a SMARTFORM using its Output Type. Should i hav eto do anything with Print Program stuff.
Helpful answers will be rewarded.
Thanks,
Prashanth

You will have to call the SMART Form from your print program. The print program will be called by the standard SAP code, using the configuration that you will have to do in the NACE transaction.
Choose the specific application in NACE transaction, click on the output types. now, choose the output type, and clock the Mail and processing routintes and you can configure your print program and form here.
In side the program you will call the form.
Regards,
Ravi

Similar Messages

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

PO Print Error ---- Using output Types+

Dear Experts
we hv defined output type to take PO Print. When We taking the print for service order,
getting the dump.
"ShrtText
    &INCLUDE INCL_INSTALLATION_ERROR
What happened?
    The current program had to be terminated because of an
    error when installing the R/3 System.
    The program had already requested 226785696 bytes from the operating
    system with 'malloc' when the operating system reported after a
    further memory request that there was no more memory space
    available."
Cany anyone hv idea about this.
With Best Regards,
Jaspal Kumar

Hi,
It seems it is a memory allocation problem delete old spool request using the report RSPO1041,
if problem still persists check printer setting in t-code SPAD also have a talk with basis guys.
Hope this solve your problem.
Regards
Bikas

Using output type ET01 for Material Label

Hello,
We are looking to implement a label for Deliveries through various processes which include manual and MIGO.
We have already implemented the GR label using the output type WEE1, however, we need to implement another label for Goods Issue as well.
From our understanding we need to use output type ET01 for delivery labels. However, we need inputs on how to implement this output type. And can we also print this output form through MIGO, as I understand message is determined only at the delivery level which comes after MIGO?
Please correct me if the output type ET01 is not meant for deliveries/GI label.
Thanks,
Anil Japa

Hi Anil,
Can you check this link MIGO
Regards,
Madhu.

How to Print form using SAP Smart Forms which is migrated from SAP Script?

Hello every one,
     i have a problem in printing form using smart form which is migrate from the SAP Script...so what method i have to use...if any one know the solution for this than plz reply me as soon as possible...

hi
when ever u want to migrate the script to smartform u have to chage the driver program also..
refere this link to convert script to smartform
convert sapscript to smartform
c_formname = u r smartform name...
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
...........................CALL SMARTFORM............................
CALL FUNCTION v_fm_name
EXPORTING
    control_parameters   = st_control_parameters
    output_options       = st_output_options
IMPORTING
    document_output_info = st_document_output_info
    job_output_info      = st_job_output_info
    job_output_options   = st_job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Mail with PO doc and link document iwhile using output type 7 - Urgent

Hi all,
I'm facing a problem for my customer.
I need to send a mail with the PO forms and all link document of each item .
This mail have to be send to several user maintain with transaction MN05 and user want to change the recipient of the mail in MESSAGE Screen of PO so we try to use output type 7 which allow this modification .
Unfortunatly, with this output type i can't add by abap code document in the mail .
Does somebody face the same problem or add a solution to retrieve all recipient define by the user ?
Best regards.

Requirement Cancel

Problem in using output type for purchase order

Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavt

In me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system)

How to use output type in Outbound IDOC

Hi All,
I have a requirement where I have to trigger the outbound idoc by using output type 'ZCON'.How to program this or any idea how do i acheive this......................
Please help.
Thanks in Advance
Shanaya

Shanaya,
You will have to take help of functional guys so that they can configure mentioned output type in NACE.
Apart from that you might have to do some coding as well with condition like
IF nast-kschl EQ 'ZCON' AND nast-nacha EQ '6'.
Please check NAST table for more details and let us know if you still need some help.
Cheers
VJ

Trigger Workflow using Output types

Hi,
How can we trigger a workflow using Output types ?
We have a Z-output type configured through NACE, which will be generated on shipment document creation, and then we should trigger our Z- workflow.
Please let me know how to achieve this fuctionality....
With Regards,
Arun.

Solved....
Reference:
http://help.sap.com/saphelp_nw70/helpdata/en/c5/e4af23453d11d189430000e829fbbd/content.htm

How to print documents using correspondence types?

Sir/Madam,
I am in the process of preparing the End User document for "How to print documents using correspondence types? on client request.Plz give me the required stuff to prepare that.This is an urgent requirement.help me ASAP.
Thanks in advance
Regards
Sap Guru
[email protected]

Hi
use t.codes, FB12 & F.64
Award points if it is useful
Regards,
A.Anandarajan

Print a invoice output type on two printers

Hi,
I want to print a invoice output type on two printers simultaneously.
Is there is any ways to assing this.
Regards,
S

Hi,
From SAP at a time only single printer can print the Output.
But once the spool request is generated, in the OS level with the help of network people on SPOOL SERVER you can distribute that Spool request to multiple printers.
Regards,
Anji

Retro entires in HR Forms are not printed when using device type ZHPP3005

Hi All,
We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
Thanks in Advance.

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

Print program and output type, form layout

Hi all
Where I can see output type for Account Statements. I cannot find it in NACE.
Regards
Mona.

Hi,
You can find them in spro settings under the
financial accoung->line items->correspondence->
Execute define form names for correspondence print.
Or
go to spro-> sapreference imp
go with find and provide this
Define Form Names for Correspondence Print
and go with enter
and select the approprite line with the corresponding discription
Accounts Receivable and Accounts Payable
Thanks,
NN.

Triggering program form(subroutine) from MIGO using output types gives lock issue with Bapi_sag_change

Hi,
On creating the GR from MIGO tcode, based on the quantity check i am updating the field ELIKZ using BAPI_SAG_CHANGE.
And updation logic is written in a zprogram using with in FORM XXXXX...ENDFORM XXXXX. ( FORM XXXXX is configured in the output type ).
So the problem i am facing is on creation of the first GR with scheduling agreement number GR is posted successfully and under the output tab the i can see the green icon.
But on creation of the second GR with same scheduling agreement its showing red icon. The following is the error message " User locked the scheduling agreement ...."
I even tried using dequeue fm and transaction commit, but it didnt work. Please let me know how to over come the lock issue.
Thanks & regards,
Manojkumar K

Solved it myself....
Regards,
Manoj

Script Form print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
after checked, custom script from caused this issue, but how to resolve this problem?
best regards,

Hello,
The error ME142 can have different causes like missing authorizations
or a terminated connection. Please see SAP notes 397691 and 532251. This note
states that is errors occur when purchasing documents are output, If
errors occur when purchasing documents are output, the system generates
an error message in the message log of the message overview. However,
error message ME142 'Error in OPEN_FORM for document &' contains only
the information that an error occurred and not the error cause. With the
attached source code, the error cause is also displayed in the error
message.
Regards,
David

Print Form using Output Type

Similar Messages

Maybe you are looking for