Print from MAC to shared Windows printer

Hi,
Have a new imac and was wondering how I go about printing from the mac to the shared printer connected to my windows xp computer. I have been able to connect to a shared folder on the xp machine.
Many thanks.

I found a solution that worked for me.
When it was suggested to me by my brother-in-law (who's a Linux freak) that I use an open-source third-party application, I was skeptical; however, after perusing some articles around the Web, and following their instructions, I discovered the ol' boy actually knows what he's talking about.
In my situation, the problem was not with the network connectivity, nor even the Windows machine not wanting to play nice (my first suspicion), but rather the printer driver that came with Snow Leopard.
Details: I was trying to print from my iMac (OS X 10.6.2 Snow Leopard) to a Canon MP500 that was on my wife's Windows XP computer. My iMac saw her computer (and vice versa) and they even played well together, which should have alerted me that it wasn't the networking that was the problem, but the printer driver.
Anyways...I hope this will help someone else out. Check out the following link, and follow his leads. The article is a couple years old, but the info is still pertinent, and the links are still good. I just printed a full document to that Windows printer with no problem.
http://www.zisman.ca/Articles/2006/LEM-Print-to-Windows.html
Ciao,
Shubes

Similar Messages

NT_STATUS_UNSUCCESSFUL when printing from MacBook to shared Windows Printer

Hello Mac gurus,
I'm researching the issue I'm having when trying to print from MacBook Pro (connected to a home network via Ethernet cable) to an HPLaserJet 6MP/PS printer, which is connected to a Windows XP SP2 computer via LPT1 port. This printer is shared and successfully used by another Win PC connected via NegGear router.
I've followed the instructions to install the printer on my Mac here and here . I don't seem to have problems installing the printer. My Mac can see the printer, successfully installs it, tells me it is idle, but when I print it generates this error:
Connection fail with error NTSTATUSUNSUCCESSFUL and then after a few seconds: Unable to connect to SAMBA host, will retry in 60 sec. The printer never received any signals.
I've seen some replies here about workarounds, installing Ghost and other software. Since I have a PostScript printer, is it relevant in my case? I also read that Mac will print only to USB connected printers, is that true and that is where my problem is?
Please help.
MacPro Book Mac OS X (10.4.9) home networked
MacPro Book Mac OS X (10.4.9) home networked

Thanks for replying.
1. I shortened the share printer name in my Windows (following the instructions I mentioned above, before I posted my message), there are no special characters or spaces.
2. Mac and PCs are on the same network.
3. Printer Share is allowed on the Windows PC (not blocked). Since other PC can print to that printer, than I guess Print Share is functioning.
4. I found the directory Access on the Mac, but don't know what to do there :confused: I see that smb is used as a Network protocol. The rest I have no clue.
MacPro Book Mac OS X (10.4.9) home networked

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

Can't print to windows Vista printer from Mac OS 10.6.7

Hi All,
Proud new owner of iMac 27" and have successfully managed to set up file sharing between my new Mac and current Windows Vista machine. Windows is attached to a Belkin 54g wireless router. A Canon MP960 is attached to the Windows machine via USB. The Mac is working with the network via Airport.
Problem is that I can't see the printer from the Mac. I have tried manually setting up the printer to be shared with the Mac via:
Mac OS X v10.5 or later
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Click the + button to add a printer.
Press the Control key while clicking the "Default" icon (or any other icon on the toolbar), then choose Customize Toolbar from the contextual menu that appears.
Drag the Advanced (gear) icon to the toolbar.
Click Done.
Click the Advanced icon that was added to the toolbar.
Choose Windows from the Type pop-up menu.
In the URL field, type the printer's address in one of the following formats:
smb://workgroup/server/sharename
smb://server/sharename
Note: "workgroup" is the name of the Windows workgroup that the computer sharing the printer belongs to. "server" is the name of the computer sharing the printer (or its IP address). "sharename" is the shared Windows printer's share name. If the share name contains spaces, replace each space with "%20" (without quotation marks).
Tip: You don't need a "workgroup" when specifying the IP address of the computer (such as when the printer is on a different subnet), or if your Mac belongs to the same Windows (SMB) workgroup.
In the Name field, type the name you would like to use for this printer in Mac OS X.
Choose the appropriate PPD or printer driver from the "Print Using" pop-up menu.
Click Add
I have also allowed printer sharing on the windows machine. I still can't print!
Can anyone please help? Are there some settings I could have missed?

I have the same setup but with a Canon MX850. This did not fix my problem.

Can't print from Mac to Windows printer

I have a wireless network of 3 computers and a printer. One is a desktop running XP with the printer attached. The other is a laptop with XP. And the last is a MacBook with 10.4.11.
I can print from both computers running XP but I can't print from the Mac. The Mac sees the printer and I can add it and try to print from it. When I try to print I get the error message:
NTSTATUS_NOMEMORY
I later get the "Unable to connect to SAMBA host, will retry in 60 seconds" message too.

Be sure the printer name assigned in Windows is not more than 11 alphanumeric characters. Long names with punctuation and the like are known to cause problems.
Look at:
Mac OS X 10.4- Can't print to a printer shared by Microsoft Windows;
Mac OS X- Cannot locate a shared Windows printer;
Mac OS X- How to manually add a Windows shared printer;
Setting up to print to a printer shared by a Windows computer via SMB;
And finally this:
Monday, July 24 2006 @ 11:00 AM PDT
Tutorial: Resolving common printer problems
Mac OS X offers a robust printing system with built-in support for hundreds of devices from a wide body of manufacturers. It's not without flaws, however, and printers often become unrecognized or non-functional after a significant Mac OS X update. Printers connected through hubs or AirPort base stations can also exhibit some frustrating issues.
Below is a run-down of the most generally successful printer workarounds. Keep trying until one of them sticks.
Use Printer Setup Repair This tool lets you verify properties of the root user, the Printing Services (lp) user, and Print Operators (lp) groups, reset the printing system, perform CUPS maintenance and more. Run through its set of maintenance tasks before delving into further printer troubleshooting. See how to use it in this article.
Re-install CUPS If you are experiencing printer issues after applying an incremental Mac OS X update, problems may have occurred with your CUPS installation during the update process.
The file is available from this Web site: http://www.cups.org/software.php, and is labeled cups-1.2.1.dmg
Delete then re-add printers/Reset printing system Open Printer Setup Utility, located in Applications/Utilities and look at the "Printer List" Highlight and delete all entries.
Alternatively, go to the "Printer Setup Utility" menu at the top of the screen and select "Reset Printing System".
Click the "Add" button and re-add your printer(s).
Gutenprint and usbtb Some users have been able to resolve printer communication issues by installing the excellent open-source Epson printer drivers available as part of the Gutenprint package (formerly known as Gimp-print) and usbtb, a CUPS back-end for USB printing.
Remove non-required drivers Removing extraneous drivers from /Library/Printers(name of manufacturer) can sometimes resolve printer issues. Remove files that are for other models than your own.
Re-install drivers Re-installation of printer drivers from original media or from a Web download (either directly through the manufacturers site or via a search by model/manufacturer on VersionTracker) can resolve some printer issues.
Try disconnecting from network In some cases, LAN-connected printer, seemingly broken by the Mac OS X update can restored to normal operation by simply disconnecting the device from the network then re-connecting it.
"Communicator Error" -- try power cycling If you receive a "Communication Error" message when attempting to print after updating to Mac OS X 10.4.5, the first workaround you should try is power cycling the printer, as well as disconnecting then re-connecting it to the Mac.
Connecting directly to the Mac If you are having printer problems and are using an external USB hub, try connecting the printer directly to your Mac.
One reader who had success with this method writes:
"Unfortunately the update to Mac OS X 10.4.6 has eliminated the ability to use my Lexmark Z600 series USB printer on my iMac G5 20" iSight (rev C).
"I resolved the problem via the following: I unplugged my external USB hub and plugged the printer directly to my computer."
Disconnect from AirPort and reset For those who are using printers connected to an AirPort Express, Extreme or another wireless device with USB connections, you might want to try the following:
Disconnect the printer from the AirPort unit (or other router)
Wait a few minutes
Plug it back in
Restart the base station unit
Check for your printer to appear in AirPort Admin Utility (located in Applications/Utilities)
Print one copy In some cases, using print one copy instead of the standard print command can result in elimination of crashes that occur during printing.
Try IP printing instead of AppleTalk Some Macs are unable to see AppleTalk printers that are located on the local AirPort (or other wireless) network. Several users have been able to workaround this issue by using IP printing instead of AppleTalk.
Last resort -- Archive and Install As a last resort, try performing the somewhat tedious Archive and Install process, then re-upgrading to Mac OS X 10.4.7. This has solved some otherwise inexplicable printer issues for MacFixIt readers.

Print from Mac to Windows printer

Hi, I've got a Time Capsule that's hooked up to my Mac Pro. I have 2 windows computers upstairs that are wireless. I recently hooked up an Epson Stylus CX7400 printer to my computer upstairs which is running Windows Vista. I can print perfectly from the Windows Vista computer but I have no clue how to print from my Mac. I also want to print from my other windows computer which is running Windows XP. Any help is greatly appreciated.
Message was edited by: Stuart Lawrence

For this to work at all you must turn on printer sharing on the Windows machine to which the printer is physically connected. Since this is a Windows issue you will need to find Windows help with it. Perhaps you could post a query in the Windows forum here or at the MS forums.
Once the printer is shared you should be able to locate the printer in the Print & Fax preferences to Add it for OS X. You will need a proper OS X compatible driver for the printer.
You can locate additional help by selecting Mac Help from the Finder's Help menu and searching with appropriate keywords.
Also see:
Setting up to print to a printer shared by a Windows computer via SMB
Mac OS X 10.5- Compatibility with Windows-shared printers
Mac OS X- Cannot locate a shared Windows printer
iFelix Technical Support Pages
Not all printers and/or their drivers will work wirelessly.

Printing from MacBook to a shared Windows printer

I am having a great deal of dificulty setting up my MacBook to print to my shared windows printer. I have tried doing some reasearch on the web and have found a number of difierent atricles and I still could not get it to work.
I have also called apple support and they "can't" help because they think it's not an Apple issue. I'm not convinced.
I am running 10.4.6 and Windows XP, and my printer is a Brother HL 1430.
When I try to create a new printer on my MackBook, I click on the "More Printers" button and I select Windows Printing, Workgroup and I see the windows computer. I click on the windows machine and click Choose.
So far so good. I get a password authentication dialog box asking me to connect to the PC. I type in my account details and it is at this point that it fails.
I cannot seem to connect to the PC via this method. I am using the correct username and password - I have tried repeatedly, and I also tried setting up another account and that too failed. Both accounts were admin accounts.
When I try the username / password, I get an error informing me it cannot connect to the server with the provided username / password.
However, I do have file conectivity to the PC and I can access it's harddrive.
The strange thing is - I tried using no account name / password and it passed the authentication and I was able to see my shared printer. I set it up and it failed to print. I have since deleted this setting and I cannot replicate it. I dont understand why it rejects my account details and why it accepted blank account information, and why it no longer accepts the blank details.
I think something weired is going on here and Apple were unable to help.
I have tried using the Advanced settings via SAMBA - however, this too fails.
I am out of ideas and this is really bugging me - I have wasted over 3 hours and I still cannot print.
Can someone please help!!
Thanks.

Is your 'Brother' brand printer, compatible for BOTH Mac and PC? if so, it should/may have come with driver/installation software for both, (on opening the file, are thier/appear to be 2 set's of driver/instruction files).
If not, I would contact Brother at tech support, and ask if they have new/updated drivers, so the model will work on both PC's and Mac's. I'm running a 3rd party peripheral, that came with the above, i.e, 1 CD/driver installation file, 1 set is for Windows, 1 set for Mac, I installed it on both, and it's flawless.
The exception, I had to download new drivers for this to work w/ Win..ws XP with Service Pack 2, (it came with Mac drivers, and PC, but only for Win..ws XP, not Win..ws XP w/ Service Pack 2, hope this helps, and will watcgh for repost. GS
imac17" intel Core Duo Mac OS X (10.4.6) Mac/PC Hybrid, always getting better and better!

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

Problems Printing to Shared Windows Printer Via SAMBA (foomatic error 255)

I can NOT print from my MacBookPro to a printer that's shared out from my Windows PC. Of course, printing to this same printer from my PC works fine.
Please help me resolve this printing problem.
Read on for more details regarding my printing woes!
I can successfully setup my printer on the MAC side using the Printer Setup utility. I see the shared out printer on my MAC; I can pick the printer's manufacturer and model. Everything looks ok regarding the setup of the printer on the MAC side.
However, when I try to print a file from the MAC, the printer never prints. The print job appears to get queued on the MAC side. However, after a few seconds, the printer queue displays "foomatic-rip stopped unexpectedly with error 255" (if I selected a foomatic printer driver from the hpijs). Otherwise, it says "NTSTATUS_NOMEMORY" error (if I selected a gutenprint driver instead).
The PC's Windows event logs show no problems. Indeed, the Security event log shows successful authentication & access to the printer.
The MAC's CUPS error_log displays the these error messages:
GutenPrint fails with NTSTATUS_NOMEMORY error, then says Cannot connect to SAMBA host
hpjisGhostscriptFoomatic fails with "The process 'foomatic-rip' stopped unexpectedly with status 255"
Later, I will post the exact entries from this log (I am currently separated from my MAC laptop until later this evening).
My Apple MacBookPro is running MAC OS X 10.4.11 ("Tiger"). The printer is an HP DeskJet 5150 connected via a USB port to my DELL 8400 PC. This desktop PC is running Microsoft's "Windows XP Pro Service Pack 2").
Based on reading other posts (here) and at the Linux Open Foundation (printing), I have already done the following:
Installed gutenprint;
Installed foomatic (foomatic-rip v3.42.2.15);
Installed ghostscript (espgs v7.07.1); &
Installed hpijs (hpijs v2.7.10).
NOTE: This is NOT the same problem that I posted earlier regarding inability to print to a shared printer with Leopard (MAC OS X 10.5.0). Today's posting deals with my inability to print to the shared printer from Tiger (MAC OS X 10.4.11).
NOTE: This may be a "red herring" but you may need this additional background to help resolve my printing problem. Originally, I ran "Tiger" (MAC OS X 10.4.10) on my MacBookPro laptop. Of course, networked printing worked fine at this point. On October 28, 2007, I upgraded to "Leopard" (MAC OS X 10.5.0). Leopard was a "disaster" for me (printing, networking & many other problems). On November 9, 2007, I "punted" and re-installed "Tiger" (MAC OS X 10.4.10) from Apple's original CD. On November 15, 2007, I upgraded to MAC OS X 10.4.11 via Apple's software update utility. I vaguely recollect that networked printing was working after I returned back to Tiger.
/s/
Tony H.

As promised in my initial post regarding my printing problem, here are the actual error messages displayed in the Print Queue (Hp5150) and the "cups" error_log when I try to print any file to my HP 5150 that's directly connected to my DELL PC (Windows XP Pro) but shared out so that my MacBookPro should be able to print to it.
Printer Queue Hp5150 window displays:
=========================
The process "foomatic-rip" stopped unexpectedly with status 255.
/var/log/cups/error_log displays:
=====================
I [04/Jan/2008:20:25:17 -0500] Job 3 queued on 'hp5150' by 'anthonyhackenberg'.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/cgpdftops (PID 681) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/pstops (PID 682) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 683) for job 3.
I [04/Jan/2008:20:25:17 -0500] Started backend /usr/libexec/cups/backend/smb (PID 684) for job 3.
E [04/Jan/2008:20:25:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:25:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...Insecure $ENV{PATH} while running setuid at /usr/libexec/cups/filter/foomatic-rip line 215.
E [04/Jan/2008:20:25:17 -0500] PID 683 stopped with status 255!
I [04/Jan/2008:20:25:17 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [04/Jan/2008:20:26:17 -0500] [Job 3] Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:27:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
E [04/Jan/2008:20:28:17 -0500] [Job 3] Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY
Again, the system Event logs on the Windows XP side show no error messages. In particular, the Security Event Log shows that authentication was successful; so, the MacBookPro's client process was granted access to the printer on the DELL PC side of the transaction.
Message was edited by: ClassicalApproach

Cannot find shared windows printer with NEW macbook running leopard HELP!

I just bought a new Macbook this past week. Woo Hoo. I love everything about it with the exception of file sharing and printer sharing. I have a less than one year old pc running vista that is connected to a hp 1300 series all in one printer. I can not even find this printer anywhere on the mac. i have been able to connect to my pc server via the ip address and share files this way. I am at a loss and really have no knowledge of mac. it is really disheartening, as I had way less trouble setting up windows networks for my roommates in college.
Also, as a side helper, how can I setup a shared folder that can be accessed from both the mac and the pc. I would like something that I can set on the desktop of both in order to share files better and more efficiently than connecting to a server everytime I want to do this. Please help, and explain as if I am as stupid as I appear.
Thanks.

Here are two articles that may help:
Mac OS X- Cannot locate a shared Windows printer.
Mac OS X 10.5- Compatibility with Windows-shared printers.

Printing to a shared Windows printer

I can't seem to print to a shared Vista printer on my home network. I've scoured the Internet and this support site and have run into brick walls. According to the Apple web site: "Shared Windows printers automatically appear in the Mac OS X Printer Setup Utility so they can be added to the Macintosh as a local printer queue."
This isn't happening for me. When I bring up the Printer Setup Utility, I get the "Printer List". I click on "Add". I get the "Printer Browser". In the protocol selector, there are three protocols, none of which relate to Windows. So I click "More Printers..."
A secondary printer browser appears. I select "Windows Printing" in the top selector and "Home" (my Windows workgroup name) in the selector below that. I see three entries. These are the three computers on my home network (1 iMac, 2 Vista PCs). There are no printers.
There should be one printer, but there isn't. And that's the roadblock. I can access the shared folders on the computers in the network from my MacBook Pro and the Vista computer with no local printers can print to the shared Vista printer.
At work, I can print from this MacBook to a printer that is served by a Windows server of some kind. But on my home network, my iMac, my MacBook Pro, and my son's PowerBook are all equally unable to detect and print to the shared Vista printer. I should add that when the two Windows computers were running WinXP, the same problem existed.
My gut tells me that there is one tiny setting on either the PC or the Macs isn't set right. If anyone can enlighten me, I would be forever grateful.
Thanks,
Mike

I have a similar problem trying to network two Macs and a PC for printer and file sharing. I too have the nagging feeling that there's one simple setting somewhere that would cure the problem. I posted a query a week ago (4/21) and got a response from iFelix who directed me to web pages he's posted with step-by-step instructions on setting up Macs and PCs for printer and file sharing:
Sharing files between an XP PC and a Mac running OS 10.4.x
http://tech.ifelix.net/3020.html
Printing to a printer on a XP PC from a Mac running 10.4.x
http://tech.ifelix.net/3015.html
Printing to a printer on a Mac from a PC running Windows XP
http://tech.ifelix.net/3000.html
The instructions didn't solve my problem but perhaps they will yours.

Print to a shared Windows printer

OK, here is a scenario that I hope someone can help me with. I teach at a university, and I have in my office an elderly PowerMac G4-450 which, by choice, I use instead of the shiny new Dell PC that my department has generously provided for me (I like iWork way better than MS Office).
The Mac, of course, can't be upgraded beyond Tiger, so I run 10.4.11. The PC has a local shared printer on a parallel port, so I can't plug it into the Mac, but would like to be able to print to it from the Mac. So here is the problem: the print setup menu on Tiger does not allow you to specify a Windows domain, only a Workgroup. The PC is part of a domain, so its shares don't show up on the Mac. I have no control or authority over the configuration of the PC, so I am stuck with a printer on my desk that I can't get to without transferring files around and messing with two computers constantly.
Does anyone know if there is some trick for accessing a shared Windows printer that is a member of a domain? Is there some third party app or driver or hack or something that might make this printer visible from the Mac?

http://www.ifelix.net/tech/ has some hints on sharing printers between various flavors of Windows and Mac; depends on the OSs in play as to whether they actually got a guide written for it or not. Maybe something there will help.
As a side note, if you have access to a fast enough Mac, that will take 10.5 and has a firewire port, you could hook up that older PowerMac to it via firewire, boot up the PowerMac 450 in target disk mode (hold down T key while booting up) and then from the faster Mac, install OS 10.5 onto the externally mounted hard drive now appearing on its desktop that is your PowerMac 450 hard drive. That's how I squeezed 10.5 onto an old 2002 Quicksilver G4/800 computer a few years back.

Adding a shared Windows printer

I am attempting to add to my iMac G5 a shared Windows printer (a Canon i9900) via the Printer Setup Utility following Apple Support Document # 301397 instructions. The printer is connected to a PC (running Windows XP) via a USB cable. The iMac and PC are networked via a router. One of the last instructions (7) in the Apple Support Document # 301397, "Choose the appropriate PPD or printer driver from the Printer Model pop-up menu" leads me to select "Other" for the Printer Model since there is no i9900 printer in the list of printers offered. This, in turn, leads me to a "Choose a File" window, actually the HD directory where the user (me) is expected (I guess) to find the pertinent driver. I have a driver installer CD that accompanied the i9900 but there are no drivers which can be selected on that CD (only a driver installer). I can install the drivers using the installer program on the CD but that simply installs the i9900 printer as a local printer to the iMac.
So the question is: How do I find the "appropriate PPD or printer driver from the Printer Model pop-up menu" as Apple Support Document # 301397 instructs me to do? Or is there a better way to do this?

To Apple Discussions!
Suggest that you also cross-post in the Tiger's Printing & Faxing Forum.

Printing from a PC to a printer on a Mac

I am trying to print from a PC on Windows XP to my HP printer attached to my iMac. Both computers are linked through a router.
I have had a stab at this, but to no success! Can anyone help?
ArchieA

Printing to a printer on a Mac from a PC running Windows XP
http://www.ifelix.co.uk/tech/3000.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Printing to a shared Windows printer - worked on PB not on MBP

On my old Powerbook, printing to a shared printer on a Windows workstation was a breeze. Open the printer utility, browse for a Windows printer, select it, pick the right driver and done. Printing works great.
MacBook Pro, same process, sees the printer, creates the printer object. Printing never works. I wiped the PowerBook to give it to my wife so the old settings for this remote location are gone. I've tried printing with the firewall off and the firewall on. I don't have any local sharing turned on. The only thing I can think of is that I used to use SharePoints from Hornware because at one time it made connecting to Windows shares simpler.
Any thoughts?
Thanks!

DRChevalier,
Hmmm. Shouldn't matter whether it's a MBP or PB. OK, so it's Windows Printing. Perhaps you need to place the Macbook Pro in the PC's "Workgroup." When you enable sharing on the PC, you will have also created a Windows "Workgroup." Determine what that is, then use Directory Access on the MBP to include it in this workgroup. Do you know how?
Beyond that, make sure your printer queue isn't stopped, or delete it and try again. Sometimes this helps, and sometimes this gives you the opportunity to catch some small setting that makes the difference (which you overlooked before).
Scott

Print from MAC to shared Windows printer

Similar Messages

Maybe you are looking for