Print gets Streched

im printing from Abobe Acrobat 7.0 pro to my rip software (RTi v 8) and the image is geting stretched!!..this only happens from PDF, when i print from indesign or illustrator before converting to PDF it prints fine...ONLY once converted to PDF & printed from Acrobat it stretches it ..why would this happens?? the rip software is compatible wit all the PDF version!..i spoke to Rti tech's support and they are convinced its an adobe problem..PLEASE help...

the printjob class is quirky.
the only reliable way, i know of, to print exactly what you
want is to start your printjob, create a dynamic movieclip that is
tailored to the printers properites and then add that movieclip to
the printjob using addPage().

Similar Messages

  • Printer getting offline

    Printer getting offline. They are able to use  Printer once they are connected to Local LAN(printers there are added locally using IP), they are using  VPN Cisco Any connect. Whenever users wants to  take
    printouts they have to  disconnect from VPN then only they can fire the prints.
    user are facing this  issue  while disconnecting from VPN the local printer also  gets offline, user has to reboot the machine to take a print every time.

    Hi svigneshh,
    The main issue is that disconnecting the printer from VPN will affect the other printers ,right ?
    First of all ,I would suggest you to check the status of the printer spooler service (Serivce.msc) after disconnecting the printer from the VPN .
    We also can try the following fixit tool to have a automatical diagnostic.
    Diagnose and fix printer and printing problems automatically
    https://support.microsoft.com/en-us/mats/printing_problems/en-us
    According to the symptom ,we can try to configure the following group policies to isolate the printer to have a check .
    Computer Configuration\Administrative Templates\Printers\Execute Print Drivers in Isolated Processes  ,Override Print Driver Execution Compatibility Setting Reported by Print Driver
    Here is a link for reference of the two policies.
    Windows 7 / Windows Server 2008 R2: Print Driver Isolation
    http://blogs.technet.com/b/askperf/archive/2009/10/08/windows-7-windows-server-2008-r2-print-driver-isolation.aspx
    To troubleshoot this issue futher ,we could try to work without the VPN to verify whether it is related to the VPN .
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Wont print get error messages works fine on internet explorer

    Any time I want to print something it gives me an error message.This has happened for a while.Warning: Error in parsing value for 'filter'. Declaration dropped.
    Source File: https://support.mozilla.com/media/css/questions-min.css?build=2d0a4d1
    Line: 1Warning: Error in parsing value for 'display'. Declaration dropped.
    Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=wont+print+get+error+messages+works+fine+on+internet+explorer#ask-search-form
    Line: 0 just a few of the messages

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Wont print get error message

    every time I want to print something i get several different error messages If i got to internet explorer it works fine
    Warning: Error in parsing value for 'filter'. Declaration dropped.
    Source File: https://support.mozilla.com/media/css/questions-min.css?build=6cb06b5
    Line: 1
    Warning: Error in parsing value for 'display'. Declaration dropped.
    Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=wont+print+get+error+message&showform=1#question-form
    Line: 0

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • Does The Ink Of DeskJet Printer Gets Dried If Not Used For A Week?

    Hello Guys, I have recently bought a HP DeskJet 1510 All In One Printer. But the Shopkeeper said me that the Ink of the DeskJet printer gets Dried up if not used once for a week or two. Is that true? If yes is there a way to get back my ink?
    I have seen some Diagnostic Option in HP Printer Assistant is that the option?
    Please help me. Thank You...........

    Hi HP990
    I'd have to agree with Charles. Powering down at the On/Off switch is always recommended as it will ensure the cartridges get capped properly.
    The DJ 1510 uses IPH (integrated printheads). They won't 'dry out' if not used for a week. If you happen to run into any print quality issues you can always run a Cartridge Clean using the automated tool, see the link below for details...
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03800862
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • [SOLVED] HP printer gets crazy.

    I've been using Arch Linux and my HP Photosmart C4680 for last month with no errors. After a few days without any print, today this printer gets crazy.
    Already removed and installed cups and hplip packages.
    This is what I get from Arch:
    (scanned page)
    This is what I get from Windows
    (scanned page)
    Scanner still working.
    Last edited by mkanada (2010-06-06 13:52:38)

    Hi !
    I've got the same problem with my Photosmart C6100 at home and my Photosmart C4400 in my student room.
    It seems this issue came from the last hplip update from I don't know when. I didn't try to print immediately after it was updated, so I discovered this issue a few days before taking plane.
    My parents still can print with their Ubuntu 9.10.
    I have exactly the same piece of art than shown above.
    I've installed the C6100 as a new printer today, so there is no residual config files from it before hplip was updated.
    I'm not in a urge for it, but it will become problematic in the end of holydays
    By the way, the scanner still work properly.

  • B9180 problem b&w prints gets sepia tone

    i've got a bit odd problem now suddenly after sometime using this great printer my black and white (b&w) prints gets a sepia (light brown/yellow) tone when printing it with just grayscale with grayink only
    software when printing, Aperture 2 and ImageNest RIP 2
    any idea what's wrong?
    cheers/Tony

    Hi Tony,
    The only thing I can think of is that you may be converting to your output profile prior to printing.  BW printing is a non icc process and ICC color management can cause what you describe.
    If you are not doing this then it is either a problem in your printer of your print driver settings.  I use both Aperature and ImageNest myself and haven't had any issues.  
    Hope this was a help.  ImageNest has an article on it at:  It has the epson settings but it is the same for HP.  I called and asked:  http://www.bluecubit.com/adv-epson-bw-mode.php

  • 57F4 challan print - getting parent item no and po number for child item

    Hi ,
    In 57F4 challan, Subcontract components - i.e Child items are used for creating the challans.
    However while printing needs the parent item no with the purchase order number for that child item number.
    It is getting stored in RM07M structure.
    Any inputs / suggestions how to retrive parent item number and purchase order number for child item i.e for subcontract items?
    Thank you .
    Prasad.

    Thank you for the reply. I checked the table RSEG table for material document and PO details, however the RSEG gets populated when there is credit or debit entries.
    In this 57F4 challan there is no credit or debit enteries hence would not get in RSEG table.
    Appreciate your inputs for any other alternative.
    OR is there any table or Function Module to get the enteries of the struture of RM07M .

  • C309a all-in-one printer gets message: wireless radio is not functioning, contact HP support.

    Wireless connectivity lost this morning. Don't know why. When running diagnostics, I get message: The wirelss radio is not functioning. Contact HP support.

    My HP C309a had exactly the same problem.  Everything I found on the internet said that the printer could not be fixed and the only solution was to buy a new printer. The printer report said the wireless radio was not functioning. A factory reset did not fix the problem either. I had a problem with my HP Pavilion dv6000 laptop with the video graphics IC.  The solution for that fix was to do a solder reflow of the graphics IC.  Did it and fixed the problem. I figured maybe the same fix would work on my printer as I didn't have anything to lose at this point.  I located and removed the wireless radio board in the printer (on the left side upper right corner). I then did a solder reflow on BOTH sides of the board. I put the board back into the printer and wa-la, it connected immediately to the network. It has been functioning with no problems now for at least four weeks now (knock on wood). Hope this helps.

  • I have a Lexmark x5150 printer, getting error message Prop Res DLL not located when trying to print, just in Black. Contacted Lexmark, determined the Problem is Firefox 4.3 doesn't support this feature, although my browser internet explorer does.

    I print shipping labels through Paypal, I want to print just in black ink, but when I use the Lexmark properties to change the printing to just black, getting message Prop Res DLL not located. Spent some time with Lexmark Chat to try and find out what I needed to do to fix this. As they walked me through a couple of things to try, one was to go to Internet Explorer, found I could do the necessary printing, with no problems of getting that error message. So it appears the problem is with Firefox 4.3

    See this thread: <br />
    https://support.mozilla.com/en-US/questions/816333?s=Prop+Res+DLL+not+located&as=s
    Surprising that Lexmark wasn't aware of a problem with their drivers that is not exactly new, or restricted to Firefox. <br />
    http://support.microsoft.com/kb/918730 <br />
    http://www.proz.com/forum/office_applications/30138-error_message_prop_res_dll_not_loaded_in_word_how_can_i_fix_this-page2.html <br />

  • Cannot add printer- get error message.  LaserJet 1200

    I recently bought a dual powered MacBook. It was working perfectly, and finding my printer both attached by USB, and wirelessly. It shows up as Bonjour LaserJet 1200. Suddenly, it stopped working, and cannot be added to the printer list. I get an error message,"client error message too long", or some other nonsense. I have several other computers, running OS X, and none of them have any problem sharing the printer, which is connected to an Airport Extreme remote base station. I have tried everything, and come up with no success. So eventhough the printer is recognized, with its address, and is sharable, it suddenly and without cause, cannot be added to the printer list, and thus I cannot print. Any suggestions. Peter
    Recent Dual MacBook   Mac OS X (10.4.8)  

    I did. before and I did again. and then uploaded and installed new software and STILL get error 1282. the hp people told me there is nothing they can do it's an apple problem. I'm stumped. If you can think of anything else would appreciate it.

  • HP LaserJet 3030 printing gets "is not connected" message

    When I send data to print, the printer appears to power off then restart with "Scanner Bulb warming up" message on the printer.  Then I get a message on my computer that the printer is not connected.
    This occurs with either a USB cable attached directly to my Macbook Pro, or the USB cable attached to an Apple modem with HandyPrint software installed.  Either configuration was working previously.  Somehow it just stopped.
    Your assistance is greatly appreciated! 

    OK, can you go into your router settings to find what IP address it has given the printer?  If you want help, let me know what brand/model of router you have.
    Is there a way to get the IP address by reading it on the front panel of the printer?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Trying to install printer - get the message "You can't open the application "OSX installer" because PowerPC applications are no longer supported."

    I am trying to install print controller and printer -but get this error message when trying to use the installer:
    You can’t open the application “OSX installer” because PowerPC applications are no longer supported.
    I also have a macbook pro running the same version OS and it installed fine there - I can't find the difference; but, NEED to print from my IMac.
    Any help and/or suggestions would be greatly appreciated
    Thanks!

    I'm guessing you've tried Fiery's website for updated drivers? I wonder whether Lion drivers would work? Anything of use here:
    http://fieryforums.efi.com/showthread.php/2824-OS-10.7-compatible-drivers-availa ble?s=c8afc71d2746a67970bb42d50538898c

  • Print gets cut off C4280

    I am sending from a hospital - we have purchased a Photosmart C4280 All in One Printer - The printer has now started cutting off the 4x6 print - we print all our specimen pictures from a SD card - It's like the picture gets cut off - the date is partially there and ends with an approximate 1/2" space on print    Any help would be appreciated

    Hi,
    One note, addressing same problem as you have: 1226913.
    <removed_by_moderator>
    Do not ask for points.*
    Read the "Rules of Engagament"
    Thanks & Regards,
    Sujit.
    Edited by: Juan Reyes on Oct 1, 2009 10:55 AM

  • Lock checks printing get ticked somehow

    Hello to all,
    we have a few customers experiencing this problem. When they want to print checks, well the checks simply don't get printed, with no warnings or messages. When at the last step, they click on Print, but then nothing happens. Each time we find that the Lock checks printing check box is ticked and the customer is falbergastered because he did not knew the existance of this check box.
    So the $ 100,000 question is: how does this check box get ticked by itself ? Is it a bug or a feature ?
    Thanks
    Gilles Plante

    Hello Geneviève,
    This note is the normal explanation of this issue, if this resolve the question can you please award point and mark the thread as answered.
    Regards,
    Paul Finneran
    SAP Business One Forums Team

Maybe you are looking for

  • Web-Service Proxy and Web-Service Client access in a Bean (EJB 3.0)

    Hello Community, i want to access the SAP Knowledge-Management via the Webservice "RepositoryFrameworkWS", which resides on our Portal-System, from my Java-Application, which runs on a NW CE 7.11 Ehp1 Java Server. I choosed to create a WS-Client as a

  • Workflow - Header vs. Item level

    Hello, I am looking for some documentation / list of pros and cons of implementing header level workflow vs. item level. I understand that item level is more difficult to implement, but what are the benefits. We are looking at two types of approval,

  • DocumentBuilderFactory question

    Hi to all! Is it possible to force DocumentBuilderFactory to use default platform implementation? It's neither possible to change system property in applet nor write a file in lib directory. Thanks

  • Burn full size Jpegs in 64 bit version?

    The export prest "burn fullsize jpegs"  apeears to missing in the 64 bit version but is present in the 32 bit version>  Is this a limitation or an error?

  • Are Julian Dates ever disabled?

    Hi I am trying to build a product that integrates JD Edwards data to a 3rd party system reading data through JDBC from customer's Oracle database. (I am not using data access driver for performance reasons) My system will convert Julian dates for E1