Print GR material document

Hi,experts
There is a case:
(1) Not check GR/GI slip when goods receipts
(2) After GR,the material document should be printed out
So I went to MIGO->Display->checked the print via output control(a checkbox under the posting date),
The message "Outputs saved" appeared.
But there is not data found in MB90.
How should I do?

Thanks.
I tried with the processing mode 1 and 2, and I failed.
It seems like no GR message created at all.
The GR is based purchase order,in which only one item was included.
But the item's item category is L,subcontracting.
So,there were two kinds of material movement arised when GR.
I don't confirm whether it was the reason of it or not.
Edited by: Mic chen on Feb 9, 2009 6:24 AM

Similar Messages

  • How to Print a material document .

    How to Print a material document . W#hat all configs/settings do i have to make .
    I did the following ....
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    Then i went to MB90 and did the following ...
    n MB90 output type is maintained as WE01
    Transmission medium as 1
    sort order as 01
    procesing mode as 1
    Material document year 2009
    Material document 50xxxxxxxx
    Excecute
    system says
    No messages for initial processing exist
    Message no. VN108
    Then i select the print icon
    enter the output device
    press enter
    System throws a message " Formatting set to 'X_65_80'"
    Sysytem comes to Spool request : Information screen
    When i display spool request
    The system says list contains no data .
    What is missing??
    Pls let me know ..
    Regards
    Anis
    Regards

    Hi Anis,
    For step - 4
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain
    Print Indicator for GI/Transfer Posting Documents
    As your posting a GR, you need to maintain the settings in :
    SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt Documents
    for 101 movement as 1.
    Now post GR & go to MB03, select your document & check in messages tab if the message is generated.
    Check & revert.
    Regards,
    Vivek

  • Fixing automatic printing of material document for goods movement type 101

    Hi experts,
    I have a situation, where I want to fix automatically printing of material documents good receipt and transfer posting related to movement type :
    101- GR for plant XYZW to the printer AB12 with output type WE03 " GR note version 3" Language EN.
    311 - transfer posting plant XYZW to the printer AB12 with output type ZUGT language EN.
    Please provide pointers!!

    Hi Biju,
    Thanks a lot for the information. But I a facing a problem, I have maintained the Plant/Storage/Condition type in OMJ3 with printer also maintained in it.
    But, I am not able to generate output when I am doing MIGO for the Purchase order.
    I have to go MB02, maintain output type 'WE03' and printer-PL56 in the message tab of material document and then only i can see the spool is generated in SP01.
    My output condition type is maintained in MN21, with following parameters; Trans/Event type: WE,  Print Version: 3, Print Item: 6 for output type WE03.
    Moreover, Do I need to maintain the new printer in the printer settings.
    Please help me in getting the material document print output at MIGO only.

  • Material Document schedule job printing.

    Dear All ,
      I had configured all configuration to print the material document details in a smartofrm . All details are copied in the material document from output determination.
    if i set printing preference  4.send immediately (when saving the application) i am getting the output in the printer. Here the status is green .
    Here my user want to set the preference as 1.send with periodically scheduled job , so that all the material documents will be printed at the same time.
    How to schedule this in back ground job . I had tried in MB90 its not working there.
    Thanks in advance.
    Regards
    Srihari.P

    Hi,
    You can schedule the Job for the Despatch time  3. Send with application own transaction  also, for this you have to select the program to run for the Job, as you said you can schedule the JOB on the program of MB90
    for Using the Despatch time 1. 1. Send with periodically scheduled job, you have to run or setup job for the Program RSNAST00
    Manually you can also run the program RSNAST00 in SE38 to chcek whether the OUTPUT was processed or not
    Goto SE38 and with the RSNAST00 ,, execute and enter the Details of Application area ME and OUTPUT type and the Document number.
    Then  in the Menu click on Program--Exdcute in Back ground. It will run and in SM37 you can find the Processed outputs or Logs if any in case if they are not processed. you can then trace the error
    In the foreground you cant identify the eror or reason of why it was not processed.
    regards,
    santosh

  • Material document print

    Hi
    1. I wanted to print the material document , immidiately after goods receipt and goods issue. What are the settings config and master data required.
    2. If I am trying the print out manually, it is Printing only first line item. I wanted to print all the line items in the material document.
    Thanks
    Srinivas

    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    2) Check with your ABAP person
    Regards,
    Indranil

  • Material document printing

    Hi experts,
    I would like to know what is the workaround for the printing of material document.
    I developed 2 print layouts, 1 for GR (WE03) and 1 for GI (WA03).
    However, when I performed GR without PO, movement type 501, it was printed on Goods Issue Slip.
    I would like the transaction to be printed on Goods Receipt Slip instead.
    Any advice?
    Thanks and regards,
    JT

    Hi,
    Yes, system picks corect output type for 501MT.Movement type 501 has print indicator '6'  and triggers output type WA03
    For more check the link:
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/OutputDeterminationinInventoryManagement+(IM)
    Regards,
    Biju K

  • Printing multiple material documens in MB90

    Hi ,
             I am trying to print multiple material documents at a time (selecting by numbers) , system previews all what I have selected , but it prints only first document .
    Can anyone help me with ur I/p
    Thanks ,

    Dear Deepa ji,
    if you want how many docs we want that docs we can print but bulk print only possible through spool only.
    ones doc will saved doc will moved into spool form there how many we want then check and select print option print will come automatically in total docs.
    Hope this will help fulll
    Prem

  • How to print material document in header level?

    Hi Guys,
    How to print material document from header level. I can only print them in item level. But i want that in header level. For example, I have 4 movements inside a material document and I want to issue only one output from the header level.
    I can see the option Goto -> Additional Function -> output, but it is disabled. Please let me know hot to acheive this and if you need further info on this. Please throw some light on this.
    Thanks
    Yasin.

    HIi
      Your question is not clear.  What exactly you want to be.
    1.  To print material header in your smart form / Sap Script what is the problem. Itu2019s quite easy you can do it. Let me know what problem you are facing.
    2. The option is disables because of business functionality ask your functional guys to help you on the same.
    Regards
    Swati

  • PO print OUT And material Document Print Out is coming In English

    HI all.
    I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
    I'M taking PO and material Documents print outs  in Chinese Server log-in.
    even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
    At the Time Of PO creation the Communication Language is ZH(Chines)..
    I have read some related post even 89899..
    But I have not find solution
    plz help me.
    thanks and regards
    ramesh reddy.'

    Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
      Installation
    Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
    You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
    1. Entry by Application Group (on the left)
    2. SAP Frontend Components (on the right)
    3. SAPSPRINT (on the right)
    4. SAPSPRINT <Release> (on the right)
    5. SAPSPRINT <Release> (on the right)
    6. Win32 (on the right)
    Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
    Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
    We recommend that you set up the following options for the service in the Windows Service Control Manager:
    The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
    If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
    We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
    Also note further settings in accordance with Note 1069483.
    Settings
    You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
    You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
    All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

  • Print out of material document

    hi,
    pl guide me on the following: -
    1.  sample material (pieces) to be sent outside (thru' which mov. type) for lab testing and the same will not come back.
    Client requirement is that the samples to be sent out with a proof of document (print) and pur. order to be raised on vendor for lab testing.  Vendor will send only a test report document.  Is service PO to be raised on vendor?
    2.  how to set-up print settings of material document, pur. order. and how to take  re-printing?. 
    Thanks
    Mohan

    Hi
    1. You can print material document using transaction MB90.
    You have to create service PO for lab testing.
    2. You can print PO using transaction ME9F.
    regards
    Srinivas

  • Delayed in print out of Material Document

    Hi Everyone,
    Can you help me with my problem, what are the reasons why the print out of material document is delayed. Can you help me find the ways where can I check, why this is happening.
    hope you can help me with this.
    Ato Corpuz

    Hi
    1. You can print material document using transaction MB90.
    You have to create service PO for lab testing.
    2. You can print PO using transaction ME9F.
    regards
    Srinivas

  • MIGO - MB02 - MB90 Print material document forms

    Hi,
    I want to print out a material document form associated to material transfer within the same plant. Movement 311/411 & 415.
    As for today the procedure is to create the material doc (MIGO) -> declare the message associated (MB02) -> print (MB90). Is there a way to suppress the MB02 transaction by adding a button to MIGO? (or any other better way).
    Thanks in advance... points awaiting.
    Garcia

    Hi,
    II. Pls check the below settings for GR Print out:
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material  doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Regards,
    Manish

  • Material document print out

    Dear all,
    while taking printout of GR/GI or mat doc i am giving the output type and doc no but its not coming. but if i go to mb02 and set output type there then it will come but i want this to be default. so pl guide
    Regards,
    Dipak

    Please check the following steps in config:
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately
    regards,
    indranil

  • Why material document not able to print automatically?

    Hi,
    I think I have posted this question before, however, there is no answer, I will my luck again.
    I have setup all the necessary configuration in NACE with my new output type and output condition in MN21, yet the printing still cannot take place immediately.
    I check another output type which having printing of materail document able to print out successfully previously (same month), and I tried to post the transaction, and yet the material document is not able to show the output message record on the output message screen. All the previously successfuly posted material document having the output record shown on the output message screen, but mine is unable even though I following the same step of transaction posting.
    You guys bump into any of this problem?
    please share.
    Thanks.

    Dear Pankaj,
    Your statement below:
    And in MIGO, select the appropriate Print Version 1, 2, 3 and also activate "Print via Output Control" check box during posting GR at Header Level under "General" Tab.
    I cannot find it in the MIGO, may I know where is it?
    Thanks.

  • Material document print issue

    Hi,
    Im trieing to print material document(GR and GI).
    i have copied wa01 and we01 and created new condition type za01 and ze01.
    i have made all the settigns in customisation.
    In mb1b screen,automatically GR/GI print check box is ticked and collective slip is also selected.
    When i perform the transfer posting,
    1.In go to tab-additional function-output field is grayed out.
    2.If i select details from item in Go to tab,then output field is popping up in additional function.
    3.Output type ZA01 is not coming automatically(Condition record is maintained).
    4.If i try to enter manaully,ZA01 output type is not appearing in the pop up list.
    Please guide.....

    which movement type are you using?
    Which transaction / event type are you using? if you are posting GR, you should use WE or WF. If you are posting GI and transfer posting, you should create condition record with WA.
    You should use Date/ time field as "4" for automatic
    Check whether you assigned a printer in communication tab.

Maybe you are looking for