Print Header in Crystal Report.

Hi All,
I have a requirement that while viewing the report in excel(from CMC or any scheduling tool),the footer should only be displayed at the end of the excel/PDF report but when being printed the footer should be repeated on every new page.
Now its being repeated on every page. Same for column names as well.
How to set this option?So that while viewing the report the data should just run thru and and while printing the column names are repeated on every page.
Thanks

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Similar Messages

  • Print Preview using crystal report in SAP B1 slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    bodhi86

    Hello,
    How do you answered to this question ?
    Malika
    Edited by: Malika Sanoune on May 13, 2011 1:48 PM

  • Can we add custom print button to crystal report launched using jsp

    Hi,
    I need to add a print icon in crystal report. My requirement states that I should not use the print button given in the taskbar of crystal report. Can this be done?
    Thanks

    Are you using Crystal Reports for Eclipse?  If so, there is a new version out that suports Excel exporting:
    /people/blair.wheadon/blog/2009/01/16/announcing-crystal-reports-for-eclipse-20

  • Print preview using crystal report in SAP B1 is very slow.

    Dear all,
    I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form  and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
    Thanks in advance
    Kamlesh Naware

    Hi,
    Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
    Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
    also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
    Thanks
    Kevin
    Edited by: Kevin Shah on May 27, 2011 4:21 PM

  • Error when print out SAP Crystal Report in SAP B1

    Dear all,
    I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
    Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
    On the other hand, there's no error when I print out the SAP Crystal Report on server.
    Can anyone advice on the error message as above?
    Thanks alot.

    Hi All,
    I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on.  I am facing the same problem,
    "Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
    I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
    Regards,
    Tom.

  • Error print preview a crystal report

    Hi,
    I have an issue where i log in as a user with admin rights and try to print preview a crystal report that was created. It prompts me to log into the database, when i do this gives me a login incorrect oracle error. But when i log in as administrator i am able to do this.

    Hi,
    Additional Info:
    CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
    Balaji K

  • Print preview for crystal report

    hi kings,
    I have one problem . I Designed userform that form have print button when i press the print button the crystal report Open and show the data. but the report is not open when i press the button.Please any one help me out of this issue
    the error Shows-Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
    Dim oForm As SAPbouiCOM.Form
                        oForm = gonAppApplication.Forms.Item("Emr_NewNCMR")
                        Dim Docnum As String = ""
                        Docnum = oForm.Items.Item("txtDocNo").Specific.value
                        Dim cr As New CRAXDDRT.Report
                        Dim apcr As New CRAXDDRT.Application
                        Dim myCrystalReportViewer As CrystalActiveXReportViewerLib102.CrystalActiveXReportViewer
                        Dim RptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                        RptDoc.Load(System.Windows.Forms.Application.StartupPath & "\Ncmr.rpt")
                        RptDoc.SetDatabaseLogon("sa", "Sa@123", gonComCompany.Server, gonComCompany.CompanyDB)
                        RptDoc.SetParameterValue("@Docnum", Docnum)
                        myCrystalReportViewer.rptViewer.ReportSource = RptDoc
                        myCrystalReportViewer.rptViewer.Refresh()
                        myCrystalReportViewer.ShowDialog()
    thanks regards
    B.lakshmi Narayanan

    THANKS

  • Print Preview of crystal Report without add a document

    Dear All,
    Can i see the Print Preview of Crystal Report without add a document like PLD.
    i have developed a Crystal Report through Add Command by Passing a query.
    if anybody have  idea on this issue please  suggest me.
    Thanks.
    Shekhawat

    Hi Shekhawat....
    Through Query Crystal report it is not possible to view the Layout as Draft withou adding teh docs because Report fetch the details only when itys value goes to Database Table......
    So suggest to use SAP standard CR and modify as you want....
    Regards,
    Rahul

  • Variable Text not working as dynamic header in Crystal report

    Dear Experts,
    I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
    currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
    In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
    i already set in Database -> options->  table and fields -> Show Both, but the text variable still not working.
    can you help me
    Crystal Reports 2008 12.2.0.290
    SAP Integration KIT 12.1.0.890
    Thanks
    Luqman

    Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

  • Need alternative for activex print control using Crystal reports 2008

    I have created a .Net web application (2.0/3.5 .Net framework) with crystal reports 2008.
    Reports are viewed using Crystal reports 2008 activex viewer.
    On click of PRINT icon in activex viewer, activex print control download prompt will be displayed on client machine.
    I need to avoid downloading of activex print control on client machine. Is there any other alternative or option to use print functionality in viewer without downloading activex print control on client machine?
    Or Is there any other workaround for print functionality in Crystal reports 2008 Viewer without downloading activex print control?
    Note: Activex print control download prompt will not be displayed when using Crystal reprots XI Release 2 version.
    Thanks,
    Jagannath

    Does anyone know which files need to be registered for the ActiveX print control?  We occasionally have users who somehow break their Crystal ActiveX controls, and they can no longer see the print options.  In Crystal 10, I was able to fix these issues by pushing a package which registered several files on the user's computer.

  • Can't Print preview draft crystal report.

    Print preview draft crystal report.
    Error message:
    One or more fields could not be found in the result set.
    Use verify database to update the report. Error in file POR20009. Rowset column could not be found.
    It occurs when trying to print (or preview) a DRAFT document with the report being a Crystal report.  No problems when the document is NOT a draft.  This happens on both SAP 8.8 PL16 and PL17.
    Updating the report and saving it again (as suggested by the error message) does not fix the problem.
    The DRAFT or u201CNORMALu201D document type uses the same Crystal report.   Something seems to be different when passing parameters from a Draft report?
    I can preview DRAFTS and NORMAL reports from the Crystal Editoru2019s preview pane.  This is only happening when launching from within SAP.
    Is this a bug?

    Hi Maeve,
    Can you please help by posting what exactly was the solution to this issue?
    Thanks in advance.
    Regards,
    Sanil

  • Print draft in Crystal report

    Hi all,
    I face a problem when printing draft document via crystal report.
    when i try to print preview for non draft document , it runs well
    But the problem is when i print preview in draft mode.
    I use store procedure in sql.
    my query is like this.
    Create PROCEDURE [dbo].[Form_PO]
    @Dockey numeric(19,6),
    @ObjectId Numeric(19,6)
    AS
    BEGIN
    IF @ObjectId = 22
    BEGIN
              SELECT
                        --'ND' [DocuTipe],
                        a.DocEntry,
                        a.DocNum [PO NO],
                        a.NumAtCard [Reff Number],
                        a.DocDate [Document Date],
                        a.DocDueDate [Delivery Date],
                        a.TaxDate ,          
                        a.CardCode [CardCode],
                        a.CardName [CardName],
                        a.Address2,
                        c.PymntGroup   [Payment Terms],
                        a.Comments [Remark],
                        a.DocCur [Currency],
                        b.ItemCode [ItemCode],
                        b.Dscription,
                        a.DocType [TypeDoc],
                        e.TrnspName [Incoterms],
                        b.Quantity,
                        b.Price [Price], 
                        b.LineTotal  [Amount],
                         a.DocTotal [AmountTotal],
                        d.Phone1 [Telp],
                        d.Fax [Fax],
                   FROM OPOR a
                        INNER JOIN POR1 b ON a.docentry = b.docentry
                        INNER JOIN OCTG c ON a.GroupNum = c.GroupNum 
                        INNER JOIN OCRD d ON a.CardCode = d.CardCode
                        LEFT JOIN OSHP e ON a.TrnspCode = e.TrnspCode
                   where a.DocEntry = @Dockey
    END
    IF @ObjectId = 112
    BEGIN
              SELECT
                        'DR' [DocuTipe],
                        a.DocEntry,
                        a.DocNum [PO NO],
                        a.NumAtCard [Reff Number],
                        a.DocDate [Document Date],
                        a.DocDueDate [Delivery Date],
                        a.TaxDate ,          
                        a.CardCode[CardCode],
                        a.CardName[CardName],
                        a.Address2,
                        c.PymntGroup   [Payment Terms],
                        a.Comments [Remark],
                        a.DocCur [Currency],
                        b.ItemCode [ItemCode],
                        b.Dscription,
                        a.DocType [TypeDoc],
                        e.TrnspName [Incoterms],
                        b.Quantity,
                        b.Price [Price], 
                        b.LineTotal  [Amount],
                         a.DocTotal [AmountTotal],
                        d.Phone1 [Telp],
                        d.Fax [Fax],
                   FROM ODRF a
                        INNER JOIN DRF1 b ON a.docentry = b.docentry
                        INNER JOIN OCTG c ON a.GroupNum = c.GroupNum
                        INNER JOIN OCRD d ON a.CardCode = d.CardCode
                        LEFT JOIN OSHP e ON a.TrnspCode = e.TrnspCode
                   where a.DocEntry   = @Dockey
                   and a.ObjType = 22
              END
    END
    So when i print draft document the objectId is 112 and will select the odrf table.
    The issue is when print draft there is no data, but actually there are data in the odrf.
    Is there any problem with my query ?
    Regards
    Jia shun

    Hi,
    To print draft document using stored procedure , use base document object type instead of 112.
    for e.g. if you want to print purchase order draft set condition as Objtype ='22' instead if 112. It will fetch data.
    Thanks,
    Neetu

  • Remove Printer Name from Crystal Report

    How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
    Here's the scenerio.  When I first create a Report and don't go into Page Setup, PrinterName property is blank.  If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected.  If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank.  But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

    I'm still not sure what is unclear about my first question.  And I'm not sure how any of the info you are requesting is going to make any difference in answering my question.  And I'm not sure how your analogy fits here but ..
    Version of CR = 11.0.0.895
    CR Service Packs applied = None
    Web or Win app? = Win App
    OS? = Windows XP Service Pack 3
    Development language?  = Both Visual Basic 6 and C#.Net 2008
    Method of CR files deployment = email the .RPT file to a client
    Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
    What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
    So here are the exact steps so you can understand what is going on:
    I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
    1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
    2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
        Dim m_crApp As CRAXDRT.Application
        Dim m_crReport As CRAXDRT.Report
        Set m_crApp = New CRAXDRT.Application
        Set m_crReport = New CRAXDRT.Report
        Set m_crReport = m_crApp.OpenReport("Test.RPT")
    3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
        ie. crReport.PrinterName is equal to ""
    4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
    5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
    6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
        ie.  crReport.PrinterName is equal to ""
    7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
    8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
    9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
        ie.  crReport.PrinterName is equal to "
    MyNetwork\MyPrinter"
    PROBLEMS:
    1. The client needs the report to go to the default windows printer of their machine
    2. If the "No Printer" Option is checked, the Report does not print at all
    3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply.  As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
    4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
    5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
    All i want to do is either:
    1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
    2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

  • Print button to crystal report

    Hi All,
                  In my business partners form i want to take related activities report.If i press print preview then basred on my coding it should go to cystal report not to sap report.can anybody suggest me some ideas about this.
    thanks
    shangai

    Hi
    What version u r using?
    If it is 2007 then it will take the Normal PLD only,there is no automatic diversion to Crystal report.
    In 8.8 u can have both option PLD & Crystal Report to print the Doc's
    Giri
    U have posted two thread r it might be duplicated. so close one thread and follow the other thread.
    Edited by: Giri dharan on Jan 6, 2010 12:36 PM

  • Print preview using Crystal Report

    Hello All,
    In SBO 8.8 or in 2007 with add-on (like B1UP) it is possible to have a cystal report launched by the preview buttons. It works perfectly when the document is stored in the DB, the preview is blanked if you don't have the document validated (created in SAP).
    In PLD this functionnality is available with the screen variables, is there a way to have it in crystal report?
    BR
    Arnaud VIVIANT

    Hello Gordon.
    Thanks for response but it doesn't answer the question.
    Question is : is it possible to use the print preview functionnality in crystal without creating a document in the database (as it is possible in layout designer) ?.
    I know that the preview will work when I created the document in the DB.
    Regards,
    Arnaud

Maybe you are looking for