Print horizontal page

All browsers print pages, which are vertical-long. I have some horizontal-long pages. But FF shrinks such pages.
Is there a chance to print long-horizonatal pages ? And will you develop this feature? I need it very much

Today I have rotate the horizontal page to vertical, using css property "transform: rotate(90deg);"
http://palayner.com/construction/geo/_14print
login "1111" password "qwe" (without quotes)
I see that vertical pages Mozilla FF can't print.
What is interesting, '''Google chrome can'''. It's terrible!
I don't want leave FF browser and go to use chrome, becasuse there are many problems with chrome (table display, ajax-queries and so on).
I wanna see correct page printing in FF!

Similar Messages

Too many fields - how to print horizontal on page 2?

Working in CR Developer V11. We have a report that has bunch of fields in the group footer and was wondering if there was a way to print the fields two pages wide. Right now all the fields are stacked but we prefer the 'excel' effect where horizontal fields automatically (or by design in CR) are printed onto a second page at print time. This report is not a cross tab report. Can I throw the fields into a subreport and mark repeat on Horizontal pages? Any input appreciated.
Rick

Hi Rick,
With CR11 you can't. In 2008 and higher there is the option to "Dissociate Formatting Page Size and Pritner Paper Size". This will allow you to format your report as wide as you want and not be tied the the printer's paper sizes.
I've had reports that had 130 columns and I had to go down to point 2 font to get them all onto 1 line. Now I don't have to and exporting to Excel works like a charm.
Good luck,
Brian

Officejet 150 wont print full pages in Word

Officejet 150 Mobile misses printing parts of a page of text in Word 2007. I created several lines of text and it simply won't print them all. I then filled an entire page with Ariel, size 11 font. It skipped printing every third line. I repeated this with a larger font and it cut the text, horizontally, along the same width lines. Did the same thing in Corel WordPerfect X4 with the same result. Ditto in Avery Design & Print. It won't print entire 3/4" sections across the page. I've uninstalled drivers/printer, rebooted, etc., several times to no avail. Print Doctor keeps saying device is busy but it's not. No print jobs in que, printer was cycled on and off (several times).

Hey @dmartin05,
Welcome to the HP Support Forum.
I understand your HP Officejet 150 Mobile All-in-One Printer won't print full pages from specific word processing programs. I would like to help.
I recommend you try the following steps so we can determine whether this is most likely a hardware versus software issue:
From the front panel of your printer, make a black copy of an ordinary full-page text document. Does the partial page/print quality issue persist?
Next, touch Setup / Reports/ and Print Quality Diagnostic. How does the Print Quality Diagnostic from your printer compare to the report highlighted in the following link?:
HP Officejet 150 Mobile All-in-One Printer Series (L511) - Troubleshooting Print Quality Issues
If you were able to make a decent copy of a text document, and your Print Quality Diagnostic Report printed without any discernible issues then we can safely assume the issue is software related. If that's the case, please respond to this post and I'll be happy to provide further troubleshooting suggestions.
If you find it's the opposite and there are print quality issues from the front panel, treat this as a hardware issue and follow the troubleshooting steps provided in the above-linked article.
Best of luck - have a great weekend!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Quick Look PDF with vertical and horizontal pages

Is there any way to make Quick Look preview a PDF file with vertical and horizontal pages without adding white padding and retaining the aspect ratio?
Now, if I have a PDF with page 1 vertical and the other pages horizontal QL shows the latter also with the ratio of a vertical page and adds white padding at their top and bottom. You get the inverse output if the first page is horizontally oriented, but the rest are vertical.

Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

Cannot Print full page 81/2 x 11

Hi:
I set up a 16 slide keynote presentation and everything is fine.
I wanted to print it out and in printing it :
The Pages are printing in a 4" x 5 1/2" (inches) size on a 81/2 x 11 page horizontally and
5" x 7" on a 81/2 x 11 Page vertically.
I have the slide size at 793 x 595.
I have looked in the printing menu options and I cannot see or make any changes that change the actual printing size.
I have not had any printing issues with other applications when needed to change a size. IE: iPhoto 81/2 x 11 to 4 x 6.
Any advice or website would be appreciated.
Thanks.
Greg

I actually figured it out.
You have to have it on individual slides to print full page.
Seems somewhat incorrect but it worked thats all that counts.
Greg

Pdf prints last page mirrored and upsidedown

Last year, my old tower Mac (OSX10.7.X) suddenly began printing out the last page (only) of any PDF with an odd number of pages inverted in both vertical and horizontal axes (i.e. upside down mirror-writing), when doing double-sided printing on our HP Color Laserjet CP4005dn. Single sided printing from the same Mac and PDF worked fine. The same last page also prints correctly if I simply chose to print that page alone. I do not have the 'flip horizontal' checkbox ticked. I could find no solution.
I bought an iMac 27" late 2013 with OSX 10.9.4, all upgrades installed. I still have the same problem. I repeat, this only happens in double-sided printing (selected 'long edge binding' under Layout) of the last page of a PDF with odd-numbered pages. Word docx and other documents print just fine from the same computer and printer with same settings in the Print dialogue.
Any suggestions?

Well, it's time to ask Adobe for help... Probably some preference file corrupted or similar...
On the other hand, personally, I would be trying some generic maintenance right now -
Reset Printing System:
OS X Mavericks: Reset the printing system
Startup from Recovery partition (or any other bootable drive) and repair the disk drive using Disk Utility:
(read just the 1st paragraph About Recovery from this)
OS X: About OS X Recovery
consider downloading and re-updating using the COMBO updater (this isn't from Software Update/App Store):
OS X Mavericks 10.9.4 Update (Combo)
(or similar for Lion)
OS X Lion Update 10.7.5 (Client Combo)

Laserjet Pro 200 Color Printing Horizontal Red Lines

When I print in color, I get horizontal red lines across my page. When I print in black and white, it doesn't happen. I've cleaned & calaborated the printer & it's still doing this. Can anyone help?

Hi @kjatc,
I see that you are getting red horizontal lines when printing in color. I would really like to be able to help you resolve this issue today.
I would do a hard reset to see if will help.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I have provided a document with the steps for calibrating and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue. Some of the steps you have already tried, but please try the other steps listed. Troubleshooting Print Quality Issues.
Print a Diagnostics Page: Go to Setup, Reports Menu, Diagnostics Page.
Update the printer's firmware. Software and Drivers. Select Go under Option 2.
Are you using Genuine HP Toner?
What are the toner levels?
What were the results of the Print Quality Page and Diagnostics Page?
This will help determine if it is just one specific toner, possibly a fuser or hardware issue with the toner. Feel free to include a screen shot of both pages.
If you appreciate my efforts, please click the Thumbs up button below.
Please let me know the results. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Report painter horizontal page

I have written a report, in report painter, for planning, whereby you have the option to select two years and each year can have 12 months: all, any or none. The 24 columns are using variables for PERIOD, VERSION, RECORD TYPE, FISCAL YEAR. I am using two horizontal pages. Page size width is 253.
The report runs correctly, but, when I choose less than 12 months in the first fiscal year, I want the second fiscal year to display & print adjacent to the first fiscal year. However, it won't, it displays & prints on a separate page. It is as if there is a horizontal page break and I can find no data on such.
Any solutions?
Thanks,
Dan
SAP 4.6C

I found the problem. I created a report in Report Writer by copying this one. In the Column Block set, there were two page breaks. These coincided with the beginning of each horizontal page. (I earlier said there were two, but actually there are three) I took the breaks out and the report displays & prints correctly.
Now, how can I identify and delete the Column Block Page Breaks in Report Painter.
Is this the right forum for this question? If not, where should it be posted?
Dan

932c prints blank pages

I have an old but always reliable, until today, 932c deskjet, tied to a dell e521 Vista (home basic) computer. The printer worked fine yesterday, and now prints blank pages. (Correction -- nearly blank, there are very faint horizontal irregular dashed lines in the "draft" quality setting. If I set the print quality on best, it does appear to print the document to a very slight degree, but still unreadable.) The cartridge indicator is on the far right (the OK position, and there are no blinking lights. In that it was printing very clearly yesterday, I am sure there is ink in the cartridge.
Any ideas? (One last note: given that two new cartridges will be approach the cost of a newer and faster machine, that is one solution that I have considered trying and have ruled out.)
Thanks

Try printing a diagnostic page as shown here. If this page is blank then gently blot the printheads on a damp tissue. The black cartridge should have a dark black blot and the color should show dark stripes of cyan, magenta and yellow. If the cartridges do blot properly but do not print the printer electronics may have failed. If the cartridges do not blot properly then I would suggest returning the cartridges to the printer and running three cleaning cycles from the toolbox. If this does not clear the problem then try soaking the printhead in 1" of very hot water for a few minutes, then blot on a tissue and try a test page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Trying to print "horizontal" in iPhoto

I am trying to print 'horizontal' but even after changing orientation in 'Page Setup' it still comes out vertical.
Help!
Thank you!

I repaired and it still will not work.
This is what I'm doing...
In iPhoto...
1st. I click on a photo (standard horizontal image)
2nd. I go to 'page set-up' and 'pick horizontal'
3rd. Then- file/print and the drop down box opens...the printer selected is correct/my presets are correct/paper: US Letter/Style: Standard Prints
In the section below is the size I choose (5x7) and I click 'one photo per page' This whole time the little preview at the left is showing the paper as Vertical...it's only when I click 'one photo per page' that the image turns 90* cc(in the preview on the left) and it shows it to be how I want it.
When I 'print' it comes out printed on a vertical format.
I must be doing something wrong. I swear when I did this berore up-grade it did as I asked...?

Printing two pages per sheet with equal margins

My first post here. I did a search but didn't see an answer to my question.
How can I get equal margins when printing two pages per sheet?
I print aviation approach plates 2 pages per sheet and fold the sheet of paper in half and carry with me in a knee board. I had no problem doing this until last week after my hard drive was changed. The steps I normally take are:
click file
print
print range: all
copies: 1
page scaling: multiple pages per sheet
pages per sheet: 2
page order: horizontal (for the first pass through the printer and horizontal reversed for the second pass)
print to file: box checked
the preview now shows a winder margin on the left side of the page than the right.
I can't figure out any way to even the margins. Anyone have any ideas?
John W.
Colorado

What printer model? What program are you printing from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to print complete page???

Hi Everyone,
I have developed one ADF Application with 2 pages.
In first page, i have many ADF tables. under one panelgroup layout(horizontal) i placed 6 ADF: Tables and
When i right click on the page and click on print Preview option then some tables are truncated in the print preview.
So i reduced the size of each table and kept under print preview page but the look and feel is not good now as there is much space left in the right side.
So wat can i do for it now?
how can i make all my tables (the complete page from left to right) in print preview?
Thanks.

Hi,
try this,
<af:table styleclass='"AFStretchWidth">
thanks,

LJ 1300 printing horizontal lines and "echoes" every 1.5 - 2 "

Hi there,
We have an LJ 1300 (it's older, but **bleep** solid..).
It's started printing horizontal lines, almost line a dirty roller, or cartridge. We also get "echoes". So if you print a windows test page, you get the well printed "Windows Test page" at the top, and then a few inches below, a pale/faded copy of the same text.
I tried a different cartridge (IT guy at work even let me keep it..HA). The lines stopped for a few weeks and then started again.
I carefully undid all the screws on the outter casing (having unplugged it), so as to expose as much of the rollers as possible, and blew (while outside), compressed air on as many of the rollers and anything in the paper path as possible.
I also tried the HP LJ toolbox utilities, trying to printer cleaning..I did it 3 times..each time the paper came out white (yes the notes say to do it with a transparency, ..I don't have one on hand).
Any idea what the issue is? Another dead printer cartridge???
Am I better to scrap it and buy another workhorse (P2035?)?
Thanks

Hi -
For the Lines, how far apart are they (in millimeters)?
For the echoes, how far apart are they (in millimeters)?
Also, are you using Genuine HP toner cartridges?
And what type of paper are you using?
Sorry for all the questions, I'll try to help if I can

How can I print some pages from multipage report

Hello,
I have created a multipage report in word. I would like the user to be able to print the pages selected (as in word printing: pages: 1, 2-3);
I am using Office 2007 pro, the LabVIEW Report Gen Toolkit, LabVIEW 2009, and Windows XP.
I used the suggestion in thread:
http://forums.ni.com/t5/LabVIEW/How-can-you-print-a-single-page-of-a-multipage-report/m-p/155233 , modifying the print VI that comes shipped with LabVIEW: NI_ReportGenerationToolkit.lvlib:Word_Print.VI.
first of all I put two integer constants on "From" and "To" in the Invoke node (PrintOut), but Labview return an error:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi -> print2.vi
Then I searched for PrintOut Method in word 2007 Reference guide, and I saw that for using From and To the Range field must have the string wdPrintFromTo;
I insert wdPrintFromTo string in RANGE Field and tryed.... same error......
After that I change approach; removed all constants and used the field Pages; I put a string "1-2" connected to this field and now the printer respond, but all pages was printed!
What's wrong?
many thanks
Attachments:
print2.vi ‏18 KB
parte comune.doc ‏43 KB

Thanks, Alex!
ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
I don't try second approach, because at this time I have only one report
I try also with VB macro: this is better (print3.vi) but.....if I use:
Sub Print_Pages_From_To()
ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
End Sub
is ok; print the pages selected; if I use:
Sub PrintPages()
ActiveDocument.ActiveWindow.PrintOut Pages:="2-3"
End Sub
printer print all pages.
what do you think?
regards,
Italo
Attachments:
print Problem.jpg ‏39 KB
print4.vi ‏19 KB
print3.vi ‏19 KB

Is there a way to create a "Print This Page" link?

I have a client who want to insert a print this page link that launches their print utility. Is this possible with Muse?

This is not a function of Muse. You'll need to use the 'insert arbitrary HTML' function to add this.
Here's where to get the javascript to insert.
Beware that Muse only produces a generic stylesheet and does not define its specific media type. That means that printing a Muse-generated web page or rendering a Muse website on a mobile device can be extremely messy. Elements may fall off of a page or may be sized oddly. The Muse showcase shows how the Horace and Lydia site falls apart in print. Elements appear broken and blank pages result.
Muse developers need to employ semantic markup so that users can design stylesheets for different media types. This topic is related to the frequent requests that Muse should be able to design for mobile devices. Muse just isn't smart enough to do what a professional designer would want.

Print horizontal page

Similar Messages

Maybe you are looking for