Print ical to paper datebook?

Hi,
Has anyone figured out how to print Ical pages to either daytime or franklin covey sized sheets? There has to be a way....
Thanks!

Hi,
I'd also like to see this.
Ideally it would be paired with an SDK extension to allow us to build custom export modules for the various printing services out there. But at a minimum it should support writing to PDF for books that can be viewed online, and writing to JPEGs (one per page) to provide "lowest common denominator" support for the book printing services currently out there.
Thanks,
Matt

Similar Messages

Printing iCal calendars with a gutter

Is this possible? Am I dense? All I want to do is print my weekly view calendar with a gutter for 3 hole punching. The default printing prints all the way to the very edge of the sheet with no apparent way to edit it. Looks really gross printed that way.
Any ideas or work-arounds?

This can't be created in iCal, but it CAN be created it in another program and then used in iCal.
Here's how
1) Quit iCal.
2) In Safari (or Pages, or some other Apple app) choose File:Print:Paper Size.
3) Go to Manage Custom Sizes
4) Click on the Plus symbol to create a custom size. It should default to 8.5 x 11
5) Give this a name by double clicking on "Untitled" (eg "Calendar")
6) Set the left margin to .5 or 1.0 or 1.25 (or whatever you want).
7) Click OK
8) Open iCal
9) Select File:Print
10 Under "Paper;" select "Calendar", or whatever you named your new paper size
11) Carry on
Hope this helps.
/rb

Print ical weekly view with fewer hours

When I print iCal in a weekly view, It prints 24 hours. Obviously that isn't necessary. How can I get it to print only 12 hours or the hours I have on my schedule?

I was able to figure it out. Apparently I had the times in wrong for an event and it went from pm one day to am the next day, hence prining 24hr. When I corrected this is solved my problem. Thanks for your patience.

Hp deskjet 1510 not print A5 size paper

just we buy the all in one 1510 printer, in advance option there in option to print A5 size paper

Hello Dheerajdro,
Welcome to the HP Support Forums!
If I understood correctly, you are wondering if the Deskjet 1510 will print on A5 paper. A5 paper is not listed under the supported paper types.
To see which media sizes are supported, please review the below screen shot.
To view source: Printer Specifications for the HP Deskjet 1510 and Deskjet Ink Advantage 1510 All-in-One Printer Ser....
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Crystal report printing in halfsize paper

Hi Guys,
     Can you help me printing my crystal report 2008 report in half sheet?
i want to print it in size 8x6. i did create a printing profile in printer and set it in default.
but when i click the print button and check the preferences it always on "Letter" though i set the "halfsheet" profile in default.
"halfsheet" profile size is 8x6. when i manually select the halfsheet the printing is good. but when i dont changed it the
report print in Letter mode. can you please help me?
thanks
-karlo

Hi Sastry,
          Yes i do have admin rights to set the default profile of printer. and it also installed on the same computer i am printing. when i check the printer. the default is "halfsheet" where the size is 8x5.5.
but when i try to print, and check the preferences, it always show on "letter" and its consuming the whole letter size page when i try to print. and when i try to print the report and select the halfsheet, all is doing fine. its just to time consuming for the user to set the profile and print.
Hi Don
          I did configuring the page size of the report but whenever i try to make it on 8x5.5 landscaape is auto select. but i need is portrait type since im printing on continues paper.

How to print text in paper format iin smartforms

Hi all,
I want a question that how to print text in paper format like paper divides into 2 parts and if the firstpart is full of text i.e., it exceeds the first page the text will be displyed in the second part of the first page.
Usefull answers will be awarded.
Thanks all...

Hi,
U create two windows in the page and same as like second page.
but in first page first window select the condition print only on first page.
in second window select conditin print only on second page.
first try without creating a secondpage. if that doesn't workout create secondpage and try.
Assign points if useful.
Regards
(YUGANDHAR.P)

Adobe Acrobat Pro 9.5.0 will not print SRA3 size paper

I created an Adobe InDesign file 320x450mm (SRA3) and saved it as a a High Quality PDF. However, when I print from Adobe Acrobat Pro 9 with SRA3 paper size settings, it defaults to A4 and the printer will not register the SRA3 paper size request. The tech from Canon updated the printer driver which increased print dialog options such as Paper Handling, Paper Source etc. (which I didn't have before) and spent over an hour running tests. We both agreed there was a software issue since there were not issues from other software:
I can print SRA3 files from InDesign and Microsoft Word, but not Adobe Acrobat Pro.
This is an ongoing problem since I often receive artwork in PDF format at this size.
My workaround is to place the PDF into InDesign, line up the crops by eye and print to SRA3 paper which works fine until I need to do a double sided print which becomes slightly innacurate and often time consuming.
Canon printer driver specs:
V2.0
iR-ADV C5045/5051 PS (UK)

What happens if you select other paper sizes? Also ensure that 'choose paper source by PDF page size' is not checked at your print dialog.
Kindly let us know your results and if possible please forward us your pdf at [email protected]
Looking forward to help you out.
Thanks
-sonal

How to print on photo paper with HP Photosmart 7520 on iphoto '11

Dear All,
I have a very serious problem. I've tried so many settings and configurations without success.
Very simple. I cannot choose the photo tray in any way and I cannot print on photo paper.
I get everything on A4 format.
The printer is working fine wih other software (e.g. HP studio).
I can't believe I'm the only one.
Please help!
tks ;-)

Hi,
I came across such issues using AirPrint from Mac OS.. probably an Airprint bug.
Go to Print & Scan and click the plus sign.
From the extended add a printer dialog select the Photosmart 7520.
Open the Use drop-down and select the HP Photosmart 7520 from teh list (Instead the default AirPrint option)
Additionally from the iPhoto print dialog click Print, the OS print dialog will appear.
Set the Paper Source as Photo Tray under the Paper Type/Quality menu.
Shlomi

Using windows 7, how do I get my Officejet Pro K8600 to print to 13x19 paper?

I purchased a laptop with Windows 7. Now I cannot get my Officejet Pro K8600 to print correctly to 13x19 paper. It prints onto 13x19 paper but everything is 8.5 x 11 in size. I click print, click properties, change the paper to Super B 13x19, hit ok, the box shows the 13x19 paper with the images filling the paper, I click ok for it to print and it prints the image 8.5 x 11 in size on the 13x19 paper instead of filling the 13x19 paper. I did not have this trouble (and still don't) with my old laptop with XP. Is it the operating system or is it a wrong setting in properties? I have tried to compare the properties settings in both computers, but I cannot find any differences. I don't think it's the driver....please help!
This question was solved.
View Solution.

Hello HW,
Try this: go to Devices and Printers and right-click on the Officejet Pro K8600 and click on Printer Properties. Go to the tab called Advanced and click on the button called Print Processor. Select Winprint and click OK. Try another printout and see if it works now. If you still see the same issue see if there's a scaling option on the print dialogue in the application you're printing from.

Problem printing on dot-matrix printer with continuous paper

Post Author: kdebruyckere
CA Forum: .NET
Hi,
We're currently developping an .net application for a customer of ours in VS2005 (c#). I used crystal reports for VS2005 to create an invoice.
The invoices have to be printed on a dot-matrix printer with continuous paper (Brother M-4318). When an invoice is only one page long, there's no problem. Even when printing several sigle-page invoices after another, all goes fine. The problem occurs when an invoice is more then one page longe. The first page comes out correctly, but on the following pages everything moves ca. 3 mm upwards (3 mm on the second page, 6 mm on the third page, and so on...). On the report 'Design > Printer Setup', I selected the right printer, the right paper size, ... On the report there's a page header (consisting of two sections), and there's a page footer that is only printed on the last page, but there are no report header and no report footer.
I can not figure out what seems to be the problem. Has anyone else had this or a similar problem before? If so, please let me know. Any suggestions are welcome.
thx

Post Author: ole
CA Forum: .NET
Continuous paper is a little bit longer than normal A4 paper. I found only one way to set it: ReportDocument.PrintOptions.PaperSize =CrystalDecisions.Shared.PaperSize.PaperFanfoldStdGermanI had no success, setting continuous papersize by printer setup. ... waiting for CustomPaperSize-Property (like CustomPaperSource)... Olaf

The printer wont print on photo paper why is that

The printer keeps printing on paper instead of photo paper

How are you sending the print job, and what file type are you trying to print? I know airprint and eprint base the paper type on what file type is printing. If its from a computer you will have to specify in the print settings what paper to use.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

My c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper

my c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper. am i doing something wrong? I've never used the printer to print pictures.

Hi there bigpul,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are you recieving any errors or just blank prints?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

WONT PRINT ON GLOSSY PAPER

I HAVE A HP PHOTOSMART D700 SERIES PRINTER. FOR SOME REASON IT WILL NOT PRINT ON GLOSSY PAPER. IT TELLS ME PAPER MISMATCH, PAPER WRONG SIZE OR INCORRECT PAPER SELECTION. I HAVE TRIED EVERY TYPE OF PAPER THAT IS AVAILABLE ON THE MACHINE. IT WILL PRINT ON FLAT PAPER WITHOUT A PROBLEM

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to
wall and printer. This will trigger a ‘dirty power
up’ and restore the printer to a known good
condition (if it is possible). No user settings
are lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

I am trying to print on filofax paper but wont print on HP deskjet 3070A

The guides only allow paper to be placed in the middle of paper selection, and only half of the printing comes out, half of the page is blank. Its also very difficult to retrieve the shorter paper because the aperture where the paper is inserted is very narrow. The pages for the filofax have to be turned over and printed on both sides.

Hi Nontech,
I am not sure I understand exactly what you are doing; I will try and help. I am a user, not an HP tech.
The manual suggests that you can adjust the side guides in the printer to accomodate paper sizes. That said, there is nothing to be done about the tiny opening - the paper is supposed to be ejected when the print is completed.
The thickness of the paper used is very important. I have discovered this the hard way myself. Your printer won't have a selection for filofax paper; it should have a selection for something that perhaps you can pick that is as close to the same thickness as is possible.
Deskjet 3070A B611 User Guide
See the section in the manual on "Recommended Papers for Printing" for a general description.
Using your printing Preferences for your printer, select the paper according to what is closest to the thickness of your "filofax" paper. (EXAMPLE: Control Panel > icon view > Devices and Printers > highlight your printer > right-click > Preferences > Paper > Media)
If you can more closely match the actual thickness of the paper being printed, you might get a print of the whole sheet without it stopping half-way through the process: The completed print might then feed all the way out of the printer as it should.
Good Luck!
Kind Regards,
Dragon-Fur

Hp photosmart plus b210 wont print on dark paper

If I use dark paper the printer will just spit it out and print on the next white page. Is there a setting to allow printing on dark paper?
This question was solved.
View Solution.

I am glad I could help. I hope you do not have too many of these to print - while the strips are reusable it could get a bit tiring if there are many to print .
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print ical to paper datebook?

Similar Messages

Maybe you are looking for