Print ID for condition lines?

Hi,
who can tell me how to use the 'Print ID for condition lines' in pricing procedure settings?
tks in advance.

Hi,
print ID in pricing procedure controls the printing of that
condition lines i.e value[if condition record exists] of that condition type will be displayed when u take print preview of that document[order confirmation etc].if u set it as 'X' than that condition line[condition value] will be printed on any of your
output.Eg print preview of ur invoice.
Assign points if helpful.
Edited by: Sharad Kaliya on Sep 3, 2008 8:55 AM
Edited by: Sharad Kaliya on Sep 3, 2008 8:56 AM

Similar Messages

Purchase order print ID for condition lines

How to add / remove condition types ie. freight rates, handling charges in purchase order print out ?.
i want the values of these condition types to be /not to be in the purchase order print out.
even when i m maintaining these values in P.0 conditions.

hi
in pricing procedure m/08 u can the condition types as print relevant.
maintain it and check in print preview
If this Hint had helped please reward points
gibi

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Pretty Printer ONLY for selected lines in ABAP editor?

Hi,
I have done SETTINGS(Menu----Utilities) in PRETTY PRINTER in my ABAP editor that, all KEY WORDS shuld b in UPPER CASE.
Say, I hv written code(in raw format, not yet pressed the PRETTY PRITER) like below,
ABAP Code Line_1
ABAP Code Line_2
ABAP Code Line_3
ABAP Code Line_4
ABAP Code Line_5
I want to hv pretty printer format for Line 3 and Line 5 ONLY!! I do not want to hv it for other lines, so, I high lighted(selected) those lines (3 and 5) and pressed pretty printer, but, am getting the pretty printer format for all the rest of the code as a single shot!!
So, pls. let me know that, How I can get the pretty printer format ONLY for the lines, for which I wished(selected by high lighting)?
And also let me know, How Can I do automatic(not manually) indentation for my code as a part of pretty printer? Actually, I tried but, am not getting even though I checled the check box intendation in SETTINGS!!
Thank you

Hi ,
Preety printer will work on all the code that is avaliable in window,
In case. if you want to do partial , copy your code in seperate window and do Pretty Printer for it.
Refer http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ad6454211d189710000e8322d00/frameset.htm for other queries.
Edited by: Harsh Bhalla on Nov 27, 2009 9:17 AM

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

During MIRO Condition line item not picking against Delivey Note

Hi,
We create a PO with Entry tax condition type. Problem is....
Case 1: - When we are doing MIRO of this PO, Entry tax condition is showing in line item.
Case 2: - When we are doing MIRO against Delivery Note of related PO, Entry tax condition is not showing in line item...Why???
Note: - During testing we found 2 diff. thing for both case..
1. In Case 1 during MIRO, Variance Type showing values (B & A)...
...........B for Material Line Item.
...........A for Condition Line Item.
2. In Case 2 during MIRO, Variance Type showing value only B..
Please guide..

Hi
Check this thread
MIRO - Tax Code
Thanks !
E.Avudaiappan

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Report for conditions per line item in Billing document

Hi all,
Is there any report that can tell me all the price conditions that are allocated to a billing document line item? I am talking about the actual conditions relevant for a line item, not only conditions that have a condition record setup.
So I would like to key in billing document number, the line item and get a report of all conditions that are allocated to that line item in the specific billing document.
If there is no such standard report, does anyone know what tables to link?
Thanks in advance,
Lars

Hi,
Tables VBRK and VBRP. And with field VBRK-KNUMV go to table KONV to obtain the data of all conditions.
Regards,
Eduardo

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Printing terms and conditions for a report in last page

Hi all,
I am facing a problem in reports 6i, I have PO printing Report with layout to be printed in two pages first part will be printed with po details, and for every po number after printing all the details for that purchase order, in the last page i have to print terms and conditions can any one help me out
Regards
Vizith

Hello,
You should post also the report type (Tabular, Group..etc) you are trying to create also. Because without that like these type of requirement can not be suggested.
I can only make guess that you are creating report as Group Above and group frame is for PO. Then just put your terms and conditions frame after the detail frame inside the group frame. Then it will print after completing the details for each PO.
-Ammad

Printing problem for line items in a smartform

Hi
I am developing a smartform for inbound delivery, i have to print each line item in each page and each line item should be printed according to count of pallets.
lets say if my first line item has 5 pallets, it should print 5 time on smartform. and second line item should print on second page , and this logic should continue for all line items.
can some one help me out ?

item No Material No Descripition Putaway Bin SUT Vendor Batch LE QTY COA Base UOM
this how my line item should like, i am able to print only single line item for each item no.
if i have 5 pallets for single line item, i want the same line item to be printed 5 times and this is what i am looking at

Print RFKORD50 only for customer line ?

I have to print credit note only for customer line (account type 'D'). Then I use TCode F.62 using printing program RFKORD50. But RFKORD50 will print for customer & vendor line.
Could you please to help me to only print customer line ?
Is there any better printing program ?
Thanks in advance.

Try out this.
If your query is something like this
Select col1,col2,col3,col4 from tab1
now you have pulled col1,col2,col3 from the group and have formed the group left.
Select Col1,col1 col1_1,....
Select each column twice from the select stmt.
Let me know whether this works.

Assigning Validation Rules to a Condition for Order Line entity

Hi,
Do we have any API(or interface) to load some validation rule( rule like 'Inventory Item= some item numbers) to a condition for Order line entity. (i.e. to load records into OE_DEF_CONDN_ELEMS).
Please let me know, thanks in advance

I am not sure of the purpose, if this to enforce a processing constraint, I will use API in the validation template defitniion and in the API I will qualify the items.
You can have these items setup in value set of a look up (custom) and then have user interface control on the same.
Is that what you are looking for?
Thanks
Nagamohan

Print goup info for each line

hello everyone,
i have a request from the user regarding a group left report. the user wants to print all the columns from the group for each line printed by the detail report, not only for the first.
for example :
col1, col2, col3, detail11, detail12, detail13
col1, col2, col3, detail21, detail22, detail23
col1,col2, col3, subtot2, subtot3
instead of
col1, col2, col3, detail11, detail12, detail13
detail21, detail22, detail23
subtot2, subtot3
does someone knows how to do this? i have to say that for the group there are some subtotals made and the user wants them. the modification of the report from group left to tabular it's not permitted.
many thanks!

Try out this.
If your query is something like this
Select col1,col2,col3,col4 from tab1
now you have pulled col1,col2,col3 from the group and have formed the group left.
Select Col1,col1 col1_1,....
Select each column twice from the select stmt.
Let me know whether this works.

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

Print ID for condition lines?

Similar Messages

Maybe you are looking for