Print in dos mode using air

is it possible to print in dos mode without print dialogue box using  abobe air...
can anybody suggest a way,,,
thankss

I don't have that printer - you'll have to look through the menus to see where to enable it.
If you can't find it, do one of these two things:
Go to Print & Scan prefs, highlight the printer, and click on Options and Supplies, then select Options. Is the option available there?
or
1) Use a browser and go to localhost:631 (this is your internal CUPS print system admin web page - on your Mac)
2) Go to the Printers tab
3) double-click the Epson, which will take you to the detailed admin menus for the printer
4) choose Set Default Options under the Administration menu.
5) Look for the draft/economy option and enable it.
6) Don't forget to apply changes by clicking on Set Default Options at the bottom of the page (may have to scroll down)
and
just to confirm - in Print & scan prefs > highlight the printer > Options & Supplies, it shows driver version 9.04?

Similar Messages

  • Report Builder - Printing in dos mode

    I am using developer 2000 - report builder
    I want to printing all my near around 15000 -in dos mode
    because in windows printing it is very slow .
    so just want to print it in dos mode .

    Hi,
    are you find any solution for you problem(slown printing in windows), if found pls send me the solution.
    Srinivas

  • Clamshell mode using air mouse?

    Hi guys, is it possible to use an iphone with air mouse to control a macbook pro when in clamshell mode? I have the mac linked up to the tv and just want to use it for videos and youtube etc....so no real need for a full blue tooth mouse/keyboard set up...

    As long as the computer retains its network connection it should work. Try it. Either it works or it doesn't.

  • Epson Printing in Classic mode using a wireless network

    I have an OS X powerbook connecting to a wireless network. The user I'm working with has a Classic application that she needs to be able to print from. I am able to set her up to print fine in OS X wirelessly, but can't figure out what to do for classic. She is trying to print to an Epson C86, and the problem is that I can not find a PPD file for this printer. I was going to set her up using the desktop printer utility and LPR. The problem is that the generic driver doesn't work for her, and I can't use the chooser to select this printer with the wireless network. Any suggestions?? I have been told that AppleTalk will not work over a wireless network so I'm sort of at a loss of what to do next. Thanks !!!
    eMac   Mac OS X (10.4.4)  

    Ended up not printing wirelessly! Couldn't find a work around

  • How Can I print my report through character mode using DOS, very very urgent

    Hi all
    I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
    Thanks
    Reddy

    Hi Reddy,
    Here is the solution.
    At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
    srini

  • I'm trying to print  an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape.  That is I change it in printer settings but no use.

    I'm trying to print an Ancestry document from an iPad 2 using air print.  The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format.  I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • HP laserjet pro M1536dnf wireless setup to use Air print

    Since I trying to print from my new Ipad Air, excuse my newbie networking printing questions!
    This what I know so far:
    1. I understand my HP laserjet pro M1536dnf is 'not' a WiFi  printer.
    2. As per HP Support and the Apple Support web sites, my HP laserjet pro M1536dnf is 'Air Print' enabled. I guess a certain firmware update must of incorporated the Air Print capabilty!
    3. As per HP Support web site, I currently have the latest firmware installed ( 20130815 ).
    Note: On my Config Report, it shows the status for both IPv4 and IPv6 as 'Network Cable Disconnected '. I have Show IP address as enabled.
    3. My home setup has the cable internet going from my cable modem to my wireless Linkys E3200 router via coaxial cable. From my router to my computer is wired via the Ethernet cable. My HP Laserjet 1536dnf printer is wired to my computer via USB cable.
    Questions:
    1.  Going from I seen and read on on-line, is correct to say 'I will have to change my Ethernet cable going from the router to the computer and change it to from the router to the printer's Ethernet port?
    2. Will I have to remove the USB from Printer to the computer?
    3. By removing the USB cable between the printer and the computer, how would my computer communicate to the printer to perform a print job? Unless, I'm guessing, I add another Ethernet cable between the router and my computer's  ethernet port!
    4. Any other tips, that I might have missed?
    This question was solved.
    View Solution.

    Hi,
    Based on the following list, your printer supports AirPrint:
       http://support.apple.com/kb/ht4356
    Therefore to print from your iPad, please use the following instructions:
    How to print in iOS
    You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
    To print, follow these steps:
    Tap or , which are at the bottom of your screen.
    Tap .
    Choose your printer, the number of copies you want, and then tap Print.
    Note: If you are printing for the first time, ensure that you are within range of your printer. All AirPrint-enabled printers within range will be displayed.
    Source: http://support.apple.com/kb/HT4356
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unable to send file in binary mode to ftp server using AIR application

    Hi,  Can any one help me. i am trying to send local files to ftp server  in binary mode from AIR application using sockets.
    I cant use PASV mode for this FTP server because security restrictions. when i am trying to send Binary command i am always getting
    error code 500 which is unrecognized command. I googled for solutions but i cant find any one using Binary mode to send data every example is using PASV mode to send
    file.
    code example:
    private function upload():void{
    sendCommand("binary ");
    private function sendCommand(arg:String):void {
                                            arg +="\n";
                                            s.writeUTFBytes(arg);
                                            s.flush();
    in response i am getting unrecognized command.

    I'm successfully using an ftp example from http://http://projects.maliboo.pl/FlexFTP/
    that I converted to spark and uses a popup progress window.
    If you don't need to use sockets I can post a sample project.
    I believe I still connect with PASV, but have no problems sending Binary files.
    I don't think they're commands that are dependent on each other

  • Can i use any wireless printer when using air express

    can i use any wireless printer when using air express

    If you are looking for a new printer, any wireless model will work with the AirPort Express.
    But, since you indicate that you have an iPad, you would want to make sure that the printer you choose is AirPrint compatible. This way, you will be able to print from your iPad....if you need that function.
    See this Apple support document for info on AirPrint and compatible models.
    http://support.apple.com/kb/HT4356

  • My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

  • Can't find my printer using Air print

    Can't find my HP Photosmart C4783 printer in iphone using Air print
    Can anybody help please

    iOS printing works to printers that support AirPrint. Right now only HP has AirPrint printers on the market. There are 18 of these printers:
    http://support.apple.com/kb/ht4356
    According to MacWorld:
    http://www.macworld.com/article/155674/2010/11/airprinters.html
    other printer makers are looking at making these printers.
    As to commonly purchased printers:
    http://www.zdnet.com/blog/btl/hp-grabs-printer-market-share/38724

  • I want to print off my new Macbook Air using my Hp 6310 - what is exact description of cable I should use

    I want to print off my new MacBook
    air -using my HP 6310 - what is the exact description of the cable I should purchase

    USB to Printer Cable is what you need.
    USB being the small rectangular one and the printer side will be a larger but square shaped one with a slight curve in one side.
    Around $5.

  • HT6220 I have an Epson WF 7610 wifi printer that i connect using my internet modem. How do i print from my new ipad air?

    I have an Epson WF 7610 wifi printer that i connect using my internet modem. How do i print from my new ipad air?

    Read About AirPrint

  • I canot use air print or dont know how to from my iphone 4s

    i canot use air print or dont know how to from my iphone 4s

    http://www.apple.com/support/iphone/assistant/airprint/

Maybe you are looking for