Print issue with Adobe PDF reader print in IE9

We are unable to print Brava PDF documents with Adobe PDF reader activeX enabled in IE9. The same runs fine in Chrome with Adobe PDF reader activeX enabled.
I noticed Chrome uses
C:\Program Files\Adobe\Reader 10.0\Reader\AIR\nppdf32.dll, whereas IE9 uses-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll.
Has anyone faced this issue?

Can you print other pdf files from within IE9? Can you download the files and print them directly from Reader on you computer? Please list the steps you are using to print the pdf from IE9.

Similar Messages

How do I display the web address with Adobe PDF Reader 10.1.1 & IE 9 x64?

Until a week ago, I was using IE 9 32-bit version together with Adobe PDF Reader 10.1.1. When I would try to open a PDF file from within the browser, it would and the Web Address would continue to display at the top of the window while browing the PDF document. I could then continue using IE 9 and move on to other pages and etc...
Now, I have swtiched to using the IE 9 64-bit version. What happens now is that when I enter an address in the web browser and it's a direct link to a PDF file example: https://www.technicalindicatorindex.com/newsletter/bpdf/TII_Newsletter _1686a_10.11.11_7055475115.pdf ), it opens up with no problems, but I no longer see the IE 9 Web Address shown anywhere. So in essence, that page becomes a Adobe PDF program window and I loose my IE 9 access. I guess the PDF files are no longer displayed within the browser (althought I have it check ON).
Am I missing something?

I did write there, but no replies
I guess that with Adobe Reader 10.1.1 running with IE 9.x in x64 bit mode, you cannot open the PDF within explorer, as it does it outside it as a separate Window?
Correct?

Problem with Adobe PDF reader for Window 64 bit using Visual Studio professional 2013

Hi,
Does Adobe PDF reader support window 7 64bits?
Best regards,
Seah

Hello,
Short answer reading into your question which has no specifics, yes it does but I am guessing there is more to what you are asking so if you could please expand your question that would be great.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Printing issues with Adobe Reader

I am having a problem printing from my Adobe Reader 9. When I print from a PDF the print is backwards.

I'm getting the same issue on some of the computers at my work.
We're all using Acrobat Standard 8.2.2 and Windows 7.
I'm not 100% whether the files have been created in In Design but they certainly look like they probably have.
Seems like Acrobat 8 (and various updates since) are not very compatible with Windows 7. I've been having plenty of headaches since we upgraded the operating systems 2 weeks ago.

Printing Issue with Adobe Reader 11.0.01 with collate/stapling

Hello,
If I send a Word document to the copier with instruction to make 6 copies,collate and staple it works fine. If I send a PDF document with the same instructions it prints all the copies out and staples them all together.
I have reinstalled Adobe Reader and my printer driver. I run on Windows XP Pro SP3 (fully patched) and using a Xerox 7435 printer.

Can you open Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

Print issue with Adobe Reader X

okay, so my problem is this:
when i print this specific document to this printer (HP Color LaserJet CP3525 PS), it will print the banner in the correct purple color.
however, when another fellow employee trys to print it to the SAME printer, with the same settings, it comes out almost a navy blue/indigo color.
i think this may be where the issue is: this is a screenshot of MY print properties under the color tab. the option for "CMYK Color" is not available under his print properties color tab. he has the latest/greatest, just updated it an hour or so ago to make sure that the update was not the issue.
why is this not showing up on his? is there some sort of add-on needed? does something else need to be upgraded?

A non admin will not be able to update Adobe Reader when the UAC turned OFF. This is the intended behavior with the Updater service for Adobe Acrobat/Reader.
Please see the following document for more details: http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Reader_Updater.pdf

Paper Type issue with Adobe Standard X printing from browser

I work in IT and have two users who suddenly started having a problem printing PDFs from a browser (IE9). We cannot upgrade the borwser to 10 or 11 because it becomes incompatible with a few of our in house websites. I uninstalled standard and installed Adobe Reader XI and did not experience the same problem, but they are in need of Standard X in order to do their job.
What happens is when the PDF opens in the browser and they go to printer, the default for paper type is High Gloss paper instead of plain or unspecified. This doesn't happen if we open a pdf from the desktop and print and the default for the driver is plain. Yes, we could save the document and then print it, but they feel that takes more time and I have to find out why this is happening. Any help would be very appreciated.
Windows 7 32 Bit PC
Internet Explorer 9

Probable issue with the Firefox is that in the documentation it is poorly worded poorly, JIDS only support FF 17.
What is the issue with IE if that does fix the FF issue?

Cannot print duplex with adobe acrobat reader 9.1.3 on centos 5.3

Hi,
I am managing some linux servers for users and I am using Centos 5.3 and acrobat reader 9.1.3 appears not able to print duplex
I tried multiple documents on multiple printers (configured via cups).
Thing is that evince (http://projects.gnome.org/evince/) does print duplex without issue. But some users need the advanced features of Adobe reader.
Document type properties print dialog box default is set to duplex mode "simplex", but they are not changeable, even not when acroread was started as root.
And the individual printer settings are set for duplex.
All that acrobat reader 9.1.3 prints out is simplex (single sided printed).
I looked for config files in /etc, but could not find it, would be nice if this could be set in a conf-file in /etc
Thanks,
Joost

>This message is for those Adobe developers
This is a USER TO USER forum, with only the space provided by Adobe... this is NOT Adobe support
To talk to Adobe go to
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
or
http://forums.adobe.com/community/general/adobedotcom_feedback

Print issue with Adobe X.

I print PDF single images fine. However, when I want to print multiple images per sheet I get three Adobe Messages. (1) The document could not be printed. (2) There were no pages selected to print. (3) A drawing error occurred. Each of these messages come up each time.
Does anyone know how to fix this issue? Thanks.

This would be a printer driver setting, not InDesign.

Issue with Adobe PDF Ifilter Extension version 11

Dear Friends
Come across few issues while determining correct version of Adobe PDF Ifilter Extension
In my local laptop I installed Ifilter extension 9.0 but unfortunately this version is no longer available for further download.
Latest version is 11.0 and I downloaded from below link.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Just for verification, I uninstalled old version(9.0) and installed the above version(11.0) but going forth PDF indexing stopped working.
I have a requirement of PDF file content search and using Lucene.Net for this purpose. Lucene indexer that I have written is reading PDF content using PDF filter extension.
I noticed above code stopped working for any site hosted on IIS. However console,desktop and IIS express applications are working fine.
For further verification, I installed the same component in another laptop also but ended with same experience.
Please provide some input.
Regards Paul

Hi Bibhas,
Please configure iFilter as mentioned in the doc: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Acrobat_Reader_IFilter_config uration.pdf
Regards,
Rave

Issue with Adobe PDF IFilter 64 bit

Hi All,
I am facing issue while using Adobe IFilter for 64 bit, the section of code mentioned below is used to load IFilter for PDF IFilter 64 bit using IPersist interface.
LibHndl = LoadLibrary(strDLLName.c_str());
if(LibHndl)
                 FnPtr_DllGetClassObject fnDLCO = NULL;
                 // Add to the load list.
                 fnDLCO = (FnPtr_DllGetClassObject)GetProcAddress(LibHndl, "DllGetClassObject");
                 if(NULL != fnDLCO)
                     IClassFactory* pICF = NULL;
                     hrslt = fnDLCO(objChachedIFilterNode.m_iidFilterPersistance, IID_IClassFactory, (LPVOID *)&pICF);
                     if( ( S_OK == hrslt ) && (NULL != pICF) )
                         IFilter *pobjIfilter = NULL;
                          hrslt = pICF->CreateInstance(pUnkOuter, IID_IFilter, (void**)&(pObjIfiter));
                         if( ( S_OK == hrslt ) && (NULL != pObjIfiter) )
                             IPersistStream* persistStream = NULL;
                             hrslt = pObjIfiter->QueryInterface(IID_IPersistStream, (void**)&persistStream);
with this pointers to IFilter and IPersistStream for Adobe PDF filter 64 bit have been obtained then the code section below is used to load the IFilter
        size_t dwReadSize = 0;
         pFile = fopen(pszFileName, "rb"); //pszFileName: complete path of pdf file
         if(NULL != pFile)
             if(0 == fseek(pFile, 0L, SEEK_END))
                 dwSize = ftell(pFile);
                 dwFileSize = dwSize;
                 fseek(pFile, 0L, SEEK_SET);
                   m_pbyDataBuffer = (unsigned char *)GlobalAlloc(GPTR, dwSize);
                    bool bolReadFile = false;
             if(NULL != m_pbyDataBuffer)
                 dwReadSize = fread(m_pbyDataBuffer, 1, dwSize, pFile);
             hStreamResult = CreateStreamOnHGlobal(NULL, TRUE, &m_pIStreamBuffer);                   //m_pIStreamBuffer: is pointer to IStream
             if(NULL != m_pIStreamBuffer)
                 LARGE_INTEGER iLarge = {0};
                 m_pIStreamBuffer->Seek(iLarge, STREAM_SEEK_SET, NULL);
                 ULARGE_INTEGER uInt = {0};
                 ULONG dwBytesWritten = 0;
                 m_pIStreamBuffer->SetSize(uInt);
                 if(NULL != m_pbySecDataBuffer)
                     hStreamResult = m_pIStreamBuffer->Write((void const*)m_pbySecDataBuffer, (ULONG)dwSize, &dwBytesWritten);
                 else
                     hStreamResult = m_pIStreamBuffer->Write((void const*)m_pbyDataBuffer, (ULONG)dwSize, &dwBytesWritten);
             fclose(pFile);
             pFile = NULL;
         if(S_OK == hStreamResult)
             if((NULL != objCIFilterExNode.m_pObjIfiter) &&\
                 (NULL != objCIFilterExNode.m_pObjIPersistStream))
                 m_pGenericFilter = objCIFilterExNode.m_pObjIfiter;
                 m_pPersistStream = objCIFilterExNode.m_pObjIPersistStream;
                 if(NULL != m_pIStreamBuffer)
                     hReturnValue = m_pPersistStream->Load(m_pIStreamBuffer);
this entire piece of code is working completely fine in debug mode where as in release mode the same thing is causing hang once the control reaches to hReturnValue = m_pPersistStream->Load(m_pIStreamBuffer); statement i.e. execution of this statement is causing the hang in application in release mode and this is happening only in case of pdf files while for all the other extensions files everything is working fine in both debug as well as release mode i.e. loading of all other IFilters is working fine.
kindly help to resolve this problem for pdf files.
Thanks
Sheela Gusain

Hi Bibhas,
Please configure iFilter as mentioned in the doc: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Acrobat_Reader_IFilter_config uration.pdf
Regards,
Rave

GPO issue with Adobe Acrobat / Reader

Hello,
I am trying to deploy out Adobe Pro 9 via GPO and when installing on clean machine there are no issues. However, we have machines with Adobe Standard 6.0, Adobe Reader 8.1.2, or actually both (ugh). Simply removing the MSD group for these older GPO's does not completely uninstall all the files and registry entries - this is then causing a "fatal error installing..." in event log when the new GPO tries to deploy, and causes it to fail. Despite all the reccomendations the only way I can get the new GPO to deploy is by going into the registry manually and searching /removing every single reference of Adobe.
Does anyone know of a more efficient method to allow the new GPO to deploy, or are the KB articles the only known options (which unforutnately did not work for me).
Thanks for any help -
Andy

Hi Andy,
I sympathize with your situation but can't offer much help. Adobe doesn't support 7.x now let alone 6.x. Further, GPO was really designed to manage registry settings and was never designed to manage full installs--especially over multiple, older versions of legacy products. You may have script your way to cleaning all the old reg keys and legacy files before installing.
The new way to handle deployments on Windows is SCCM. Microsoft recommends SCE for smaller businesses (http://www.microsoft.com/systemcenter/en/us/essentials.aspx). SCCM is far more powerful and provides an amazing set of features beneficial to managing clients across the enterprise.
Ben

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

E51:Problem with Adobe PDF reader...

I have a wired problem on my nokia E51. When ever I am trying to open a PDF file using Adobe PDF LE.. I am getting an error message.. "Operation failed".. when clicked OK I am getting another message "Not enough memory". I am wondering if any one is facing the same problem...

Hi i don't have that problem but my pdf restarts once i get to page 152 i can't go past 151, does this mean i need adobe reader le 2.5 as well?? It can only go to page 151/260 and its the same thing for another 3 documents but on another document i can read all of it. The biggest file i ahve is 2655 kb but the other are all under 1000 kb

Downloading issue with Adobe X reader

Not sure why but every single time I have attempted to download and install this I have had problems, even changed browser to see if that would help but each time I download and attempt to run and install it I either get 'not a valid win32 application' or it half installs then stops and says 'corrupt information from reliable source' or something like that and ends having failed an attempted install. Any ideas would be great and thanks.

Alternate download for Adobe Reader: http://get.adobe.com/reader/enterprise/
Alternate download for Flash Player: http://www.adobe.com/products/flashplayer/distribution3.html

Print issue with Adobe PDF reader print in IE9

Similar Messages

Maybe you are looking for