Print Job remains in queue even though it prints OK?

Hello All,
I am trying to help a friend of mine setup wireless printing from her Macbook. Unfortunately I don’t know very much about Macs and OSX but I am a quick learner
The setup:
Virgin Media Cable Modem -> connected (RJ45) to a Wireless Linksys Cable Modem -> connected (RJ45) to a Belkin USB Hub.
From the USB hub I have two printers connected:
1 x HP Deskjet
1 x Samsung ML-2240 Laserjet
Both these printers install to the Macbook perfectly as default USB devices (wirelessly) via the USB Hub. They also appear correctly in the Belkin USB Hub software console.
The HP printer works perfectly every time it is used, no issues whatsoever. The Samsung printer prints ok the first time but the print jobs do not disappear from the print queue on the Macbook, the print job doesn’t appear to complete even though it has actually printed without any issue.
The problem this causes is that after the first print job has been printed it is not possible to print again. Even if I delete the print job from the queue manually I cannot still not print a second time. The only way I can get the printer to print again is to unplug and then plug back in the USB cable that is connected to the USB Hub. When I unplug the cable the print job disappears from the queue on the Macbook. I can then reconnect the USB cable and connect to the printer and it will print again.
I have made sure that I have the latest firmware on the Macbook which is running 10.5.* OSX. I have also installed the latest Firmware and Drivers on the Samsung Printer and the USB Hub.
Is there a different way to setup the print queue that you think may help? Any ideas would be greatly appreciated. I spent 5 hours on this yesterday and it still isn’t working
Thanks
M

It should bring up the Common UNIX Printing System (CUPS) 1.3.11 manual if you're running 10.5.8 (hint; 10.5 is meaningless). Since it doesn't, I suggest doing an Archive & Install installation, followed by running Software Update.
P.S. http://discussions.apple.com/message.jspa?messageID=12477185 might give you some clues.

Similar Messages

  • I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    I turned off my phone and when I turned it back on, all my apps were deleted. I tried to reinstall my apps, but it wouldn't let me. My storage still remained the same even though, all my apps were deleted. How can I get my apps back?

    Hold the home and power button down until your phone restarts. If that doesn't work, backup and restore using iTunes.

  • Remained signed in, even though I'm signed out. He...

    Hello.
    Sorry for opening a post with no doubt hundreds of others that have had the same problem. I just can't seem to get a working solution to which I have no resorted in making a post myself.
    When I used "/showplaces" it says "You have 1 online endpoints:" And proceeds to give me details to my desktop. And to be double cautious, I use the "/remotelogout" command. Nothing appears so I am unsure if this command was executed properly or not.
    I set myself to invisible and in my Tools -> Options -> General Settings. My "Show me as Away when I've been inactive for" is unchecked.
    So after that, I click on Skype -> Sign Out. And with hopeful thoughts and praying that it worked, I check my relatives Skype in the next room and I am still appearing offline. This has been the case for over four hours without me signing back in with the hopes of it timing out.
    What other steps can I take to resolve this problem? I've tried removing and re-installing skype with no avail.
    These are my system specs:
    Windows 7 Ultimate 64bit Service Pack 1
    Skype Version: 7.0.85.100
    Without sounding harsh, I have no interest in the current development or which direction the company is trying to go in. Nor am I interested in what is trying to be achieved. I simply just want to be able to logout and appear offline as to be expected.
    Thank you in advance, if there's any more information that is required, please don't hesitate to ask!
    Kind regards.
    TLD:
    When I sign invisible, it remains in the same status as I previously was. For example, if i set myself to Do not disturb. Then set myself to invisible, I still remain as Do not disturb. Same with Away and Online.
    I cannot even set myself as Invisible.

    When you say you have changed your Apple ID, how did you change it? Did you maintain your existing Apple ID via Manage your Apple ID and EDIT it to a new email address, or did you set up a brand new Apple ID?
    Cheers,
    GB

  • Unable to find the xml message in the queue even though xml is invoked

    Hi,
    Currently,we are invoking a queue in a BPEL Process where we are trying to place an xml into it.When verified in Console can see the queue is invoked and also a new record is being created in the queue but unable to find that xml in it.Could you please tell me how and where can we find the xml in the queue.
    Regards,
    N.Das
    Edited by: DasN on 05-Mar-2013 22:52

    Check these...
    https://forums.oracle.com/forums/ann.jspa?annID=893
    http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/jms_modules/queues/ManageQueues.html
    Cheers,
    Vlad

  • HT4859 When I turn camera roll backup to OFF, and those same photos are on my other devices, will they remain on them, even though icloud will delete them from storage?

    When I turn camera roll backup to OFF, and those same photos are on my other devices, will they remain on them?  I know they will not be on icloud storage,
    but will I still have them on my devices?

    Deleting the icloud backup totally is pretty scary.  If my phone accidentally went swimming, I wouldn't be able to restore all the data with icloud.  I was trying to find a way to delete only old backups (which you say do not exist), or if I could just delete the photos from the backup.  I guess I could delete the icloud backup, switch off the camera roll from backing up, and then do an immediate backup of everything else.  What do you think?
    I am not a good apple person.
    Thanks for your help.

  • Thunderbird won't print, even though Firefox will. Job queued, but seems to think printer is offline?

    Thunderbird won't print, even though Firefox will. Print preview works fine. Job queued, but seems to think printer is offline? Port is not listed when look at print job. (USB connection) Wasn't getting an error message... job just never printed or leaves the queue. Restarting job does not help.
    Setting details below.
    Application Basics
    Name: Thunderbird
    Version: 24.4.0
    User Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
    Profile Folder: Show Folder
    (Local drive)
    Application Build ID: 20140316131045
    Enabled Plugins: about:plugins
    Build Configuration: about:buildconfig
    Crash Reports: about:crashes
    Memory Use: about:memory
    Mail and News Accounts
    account1:
    INCOMING: account1, , (pop3) mail.comcast.net:110, alwaysSTARTTLS, passwordCleartext
    OUTGOING: smtp.comcast.net:587, alwaysSTARTTLS, passwordCleartext, true
    account2:
    INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
    Extensions
    Test Pilot for Thunderbird, 1.3.9, true, [email protected]
    Important Modified Preferences
    Name: Value
    accessibility.typeaheadfind.flashBar: 0
    browser.cache.disk.capacity: 358400
    browser.cache.disk.smart_size.first_run: false
    browser.cache.disk.smart_size.use_old_max: false
    browser.cache.disk.smart_size_cached_value: 358400
    extensions.lastAppVersion: 24.4.0
    font.name.monospace.el: Consolas
    font.name.monospace.tr: Consolas
    font.name.monospace.x-baltic: Consolas
    font.name.monospace.x-central-euro: Consolas
    font.name.monospace.x-cyrillic: Consolas
    font.name.monospace.x-unicode: Consolas
    font.name.monospace.x-western: Consolas
    font.name.sans-serif.el: Calibri
    font.name.sans-serif.tr: Calibri
    font.name.sans-serif.x-baltic: Calibri
    font.name.sans-serif.x-central-euro: Calibri
    font.name.sans-serif.x-cyrillic: Calibri
    font.name.sans-serif.x-unicode: Calibri
    font.name.sans-serif.x-western: Calibri
    font.name.serif.el: Cambria
    font.name.serif.tr: Cambria
    font.name.serif.x-baltic: Cambria
    font.name.serif.x-central-euro: Cambria
    font.name.serif.x-cyrillic: Cambria
    font.name.serif.x-unicode: Cambria
    font.name.serif.x-western: Cambria
    font.size.fixed.el: 14
    font.size.fixed.tr: 14
    font.size.fixed.x-baltic: 14
    font.size.fixed.x-central-euro: 14
    font.size.fixed.x-cyrillic: 14
    font.size.fixed.x-unicode: 14
    font.size.fixed.x-western: 14
    font.size.variable.el: 17
    font.size.variable.tr: 17
    font.size.variable.x-baltic: 17
    font.size.variable.x-central-euro: 17
    font.size.variable.x-cyrillic: 17
    font.size.variable.x-unicode: 17
    font.size.variable.x-western: 17
    mail.openMessageBehavior.version: 1
    mail.winsearch.firstRunDone: true
    mailnews.database.global.datastore.id: 3e3245e7-bdfc-4ebf-98fb-abc47a5f973
    network.cookie.prefsMigrated: true
    places.database.lastMaintenance: 1395283212
    places.history.expiration.transient_current_max_pages: 104858
    plugin.importedState: true
    print.printer_Brother_MFC-9970CDW.print_bgcolor: false
    print.printer_Brother_MFC-9970CDW.print_bgimages: false
    print.printer_Brother_MFC-9970CDW.print_colorspace:
    print.printer_Brother_MFC-9970CDW.print_command:
    print.printer_Brother_MFC-9970CDW.print_downloadfonts: false
    print.printer_Brother_MFC-9970CDW.print_duplex: 0
    print.printer_Brother_MFC-9970CDW.print_edge_bottom: 0
    print.printer_Brother_MFC-9970CDW.print_edge_left: 0
    print.printer_Brother_MFC-9970CDW.print_edge_right: 0
    print.printer_Brother_MFC-9970CDW.print_edge_top: 0
    print.printer_Brother_MFC-9970CDW.print_evenpages: true
    print.printer_Brother_MFC-9970CDW.print_footercenter:
    print.printer_Brother_MFC-9970CDW.print_footerleft:
    print.printer_Brother_MFC-9970CDW.print_footerright:
    print.printer_Brother_MFC-9970CDW.print_headercenter:
    print.printer_Brother_MFC-9970CDW.print_headerleft:
    print.printer_Brother_MFC-9970CDW.print_headerright:
    print.printer_Brother_MFC-9970CDW.print_in_color: true
    print.printer_Brother_MFC-9970CDW.print_margin_bottom: 0.5
    print.printer_Brother_MFC-9970CDW.print_margin_left: 0.5
    print.printer_Brother_MFC-9970CDW.print_margin_right: 0.5
    print.printer_Brother_MFC-9970CDW.print_margin_top: 0.5
    print.printer_Brother_MFC-9970CDW.print_oddpages: true
    print.printer_Brother_MFC-9970CDW.print_orientation: 0
    print.printer_Brother_MFC-9970CDW.print_page_delay: 50
    print.printer_Brother_MFC-9970CDW.print_paper_data: 1
    print.printer_Brother_MFC-9970CDW.print_paper_height: 11.00
    print.printer_Brother_MFC-9970CDW.print_paper_name:
    print.printer_Brother_MFC-9970CDW.print_paper_size_type: 0
    print.printer_Brother_MFC-9970CDW.print_paper_size_unit: 0
    print.printer_Brother_MFC-9970CDW.print_paper_width: 8.50
    print.printer_Brother_MFC-9970CDW.print_plex_name:
    print.printer_Brother_MFC-9970CDW.print_resolution: 93725024
    print.printer_Brother_MFC-9970CDW.print_resolution_name:
    print.printer_Brother_MFC-9970CDW.print_reversed: false
    print.printer_Brother_MFC-9970CDW.print_scaling: 0.90
    print.printer_Brother_MFC-9970CDW.print_shrink_to_fit: false
    print.printer_Brother_MFC-9970CDW.print_to_file: false
    print.printer_Brother_MFC-9970CDW.print_unwriteable_margin_bottom: 0
    print.printer_Brother_MFC-9970CDW.print_unwriteable_margin_left: 0
    print.printer_Brother_MFC-9970CDW.print_unwriteable_margin_right: 0
    print.printer_Brother_MFC-9970CDW.print_unwriteable_margin_top: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_bgcolor: false
    print.printer_Brother_MFC-9970CDW_Printer.print_bgimages: false
    print.printer_Brother_MFC-9970CDW_Printer.print_colorspace:
    print.printer_Brother_MFC-9970CDW_Printer.print_command:
    print.printer_Brother_MFC-9970CDW_Printer.print_downloadfonts: false
    print.printer_Brother_MFC-9970CDW_Printer.print_duplex: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_edge_bottom: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_edge_left: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_edge_right: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_edge_top: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_evenpages: true
    print.printer_Brother_MFC-9970CDW_Printer.print_footercenter:
    print.printer_Brother_MFC-9970CDW_Printer.print_footerleft:
    print.printer_Brother_MFC-9970CDW_Printer.print_footerright:
    print.printer_Brother_MFC-9970CDW_Printer.print_headercenter:
    print.printer_Brother_MFC-9970CDW_Printer.print_headerleft:
    print.printer_Brother_MFC-9970CDW_Printer.print_headerright:
    print.printer_Brother_MFC-9970CDW_Printer.print_in_color: true
    print.printer_Brother_MFC-9970CDW_Printer.print_margin_bottom: 0.5
    print.printer_Brother_MFC-9970CDW_Printer.print_margin_left: 0.5
    print.printer_Brother_MFC-9970CDW_Printer.print_margin_right: 0.5
    print.printer_Brother_MFC-9970CDW_Printer.print_margin_top: 0.5
    print.printer_Brother_MFC-9970CDW_Printer.print_oddpages: true
    print.printer_Brother_MFC-9970CDW_Printer.print_orientation: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_page_delay: 50
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_data: 1
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_height: 11.00
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_name:
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_size_type: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_size_unit: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_paper_width: 8.50
    print.printer_Brother_MFC-9970CDW_Printer.print_plex_name:
    print.printer_Brother_MFC-9970CDW_Printer.print_resolution: 93725024
    print.printer_Brother_MFC-9970CDW_Printer.print_resolution_name:
    print.printer_Brother_MFC-9970CDW_Printer.print_reversed: false
    print.printer_Brother_MFC-9970CDW_Printer.print_scaling: 1.00
    print.printer_Brother_MFC-9970CDW_Printer.print_shrink_to_fit: false
    print.printer_Brother_MFC-9970CDW_Printer.print_to_file: false
    print.printer_Brother_MFC-9970CDW_Printer.print_unwriteable_margin_bottom: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_unwriteable_margin_left: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_unwriteable_margin_right: 0
    print.printer_Brother_MFC-9970CDW_Printer.print_unwriteable_margin_top: 0
    Graphics
    Adapter Description: Intel(R) HD Graphics 4000
    Vendor ID: 0x8086
    Device ID: 0x0166
    Adapter RAM: Unknown
    Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
    Driver Version: 8.982.6.0
    Driver Date: 8-1-2012
    Direct2D Enabled: Blocked for your graphics driver version.
    DirectWrite Enabled: false (6.2.9200.16581)
    ClearType Parameters: ClearType parameters not found
    WebGL Renderer: false
    GPU Accelerated Windows: 0
    AzureCanvasBackend: skia
    AzureFallbackCanvasBackend: cairo
    AzureContentBackend: none
    JavaScript
    Incremental GC: 1
    Accessibility
    Activated: 1
    Prevent Accessibility: 0
    Library Versions
    Expected minimum version
    Version in use

    gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
    With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here).  Clean the cartridge contascts as shown here.  If that fails and the cartridge is an original HP then check the warranty date as shown here.  If the cartridge is in warranty return it to your dealer for a warranty replacement.
    The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed.  I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • PSC 1410 - print job stuck in queue

    Sometimes my PSC 1410 stops printing part-way through a page: the warning lights "jam" and "cartridge" come on, although the paper path clears after pressing On/Resume when the spoiled sheet emerges (undamaged), and the cartridges are at about half life and have been aligned. Apart from the waste of paper and ink, the great problem is that the stuck job remains in the queue and does not respond to Cancel or Delete: even switching printer and computer off and on still leaves the job stuck in the queue sometimes, when it has been known to restart printing automatically.
    Can anybody tell me a sure-fire method of clearing the stuck job out of the queue ?

    Try this document for the partial page problem:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00447737&cc=us&lc=en&dlc=en&product=441115
    Here is a document referencing the various error light combinations as well:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00476152&tmp_task=solveCategory&lc=en&dlc=en&cc...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Help Acrobat Pro XI will only print to "all files" even though printers show up in box

    I have acrobat pro XI and now even though my functioning printer(s) show up in the box where you chose the printer you want to use, matter what i chose it always tries to save the print job as an"all files" format.  The printers are fine they work with everything else.  It is strange no matter what I pick all it wants to do is save as an "all files" file.  Anyone have any ideas??
    Thanks

    Make sure the “print to file” option is deselected in the “Advanced” options of the print dialog.
            - Dov

  • How can I print a full frame photo from iPhoto 11?  Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up.  I have an Epson R1800 with the latest drivers.

    How can I print a full frame photo from iPhoto 11?  Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up.  I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

    " Hello Jeff. Here at Oki Data, we do not support programming.  I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

  • Printer not present when trying to connect even though drivers have been installed

    printer not present when trying to connect even though drivers have been installed

    Hi Marc,
    If you are having issues with printing from your iMac I would suggest that you troubleshoot using the steps in this article -
    Mac 101: Printing (Mac OS X v10.6)
    http://support.apple.com/kb/HT3771
    Specifically -
    Troubleshooting steps you can use if there is an issue
    Ensure the printer is connected, has power, has ink / toner, paper, and no alerts on its built-in display.
    Network based printers should be on the same subnet; you shouldn't have to worry about this if your printer is on your home network.
    Use Software Update for the latest available updates.
    Delete the affected printer from Printer & Fax System Preferences, then re-add the printer.
    If the issue persists, try these additional steps:
    Reset the printing system (see below). Then, add the printer again.
    If the issue persists, reset the printing system again.  Download and install your printer's drivers from here. Then, add the printer again.
    If the issue still persists, contact the printer vendor or visit their website for further assistance.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Agent ready Radio button remains selected even though agent is on call.

    Hi
    issue
    Agent logsin to Interacton center and system by default puts him in to NOT Ready Status.
    Agent changes the status from Not ready to Ready.
    Agent receives a call via queue
    Agent accepts call via interaction center
    Ready Radio button reamins selected even though customer care agent is on phone with Customer.
    In idle situation the radio button should move from ready to not ready or any other state.
    Landscape : SAP CRM  / AMC MCIS / CISCO IPCC.
    we did our system restarts still issue is not resolved.
    Has anyone ever noticed this issue.
    any Help or guidnace is really appreciated.  Thanks in advance
    Regards

    Hi Alok,
    That behavior may be just how your CMS and Telephony system behaves. In all likelihood you are not going to get a queued call at that point, since you already are on a queued call. As long as the state display is correct once the call is ended, that is the most important thing. I have seen some telephony systems where even the hard phone shows ready during the call, and doesn't change modes until after the call is ended. Anyway, you should check with your CMS vendor - in this case AMC MCIS.
    Sincerely,
    Glenn
    Glenn Abel
    Covington Creative
    www.covingtoncreative.com

  • Firefox 18 seems to be defaulting to Adobe PDF for printing even though the print.print_printer is set to the system default. Any ideas why and how to fix?

    On Windows 7 64 bit machines, we are seeing users that have Adobe Acrobat Pro installed where Firefox 18 is using the Adobe PDF as the default printer even though the print.print_printer is set to the correct system default printer.

    On Windows 7 64 bit machines, we are seeing users that have Adobe Acrobat Pro installed where Firefox 18 is using the Adobe PDF as the default printer even though the print.print_printer is set to the correct system default printer.

  • Blank Page prints even though "Suppress Printing If No Records" option is t

    Blank Page prints even though "Suppress Printing If No Records" option is thicked.
    My environment:
    Crystal Report Developer Full version 11.5.11.1470
    Windows Server 2003 SP2 32-bit.
    We have a third party vendor application written in Java -let's call it "print deamon", but my company doesn't have access to the source code.
    The print deamon essentially listens to the core application which is located remotely, receive some print instructions such as label name, printer name, crystal reports version (8.5 or 11) and a few parameters that are passed to the crystal report template.
    When the version is Crystal Reports 11 and the template is open and query is executed (using Oracle JDBC) and if the template's query does not retrieve any rows, a blank page still prints even though the option to suppress printing is thicked.
    With Crystal Reports 8.5 version, we have no issues.
    recycling the blank page is not an option in our high volume print environment, these paper and labels are wasted big time, third party vendor says this is an issue with crystal reports XI api.
    These are some of the libraries the Print Deamon uses:
    09/25/2009  10:29 AM         2,055,844 cecore.jar
    09/25/2009  10:29 AM           211,919 celib.jar
    09/25/2009  10:29 AM           830,301 corbaidl.jar
    09/25/2009  10:29 AM           371,142 CRDBJavaServerCommon.jar
    09/25/2009  10:29 AM           121,413 CRDBXMLServer.jar
    09/25/2009  10:29 AM           670,312 CrystalCharting.jar
    09/25/2009  10:29 AM             2,162 CrystalCommon.jar
    09/25/2009  10:29 AM            94,290 CrystalContentModels.jar
    09/25/2009  10:28 AM           110,657 CrystalDatabaseConnectors.jar
    09/25/2009  10:29 AM           686,963 CrystalExporters.jar
    09/25/2009  10:29 AM            67,807 CrystalExportingBase.jar
    09/25/2009  10:29 AM           581,270 CrystalFormulas.jar
    09/25/2009  10:29 AM           330,909 CrystalQueryEngine.jar
    09/25/2009  10:29 AM         2,271,217 CrystalReportEngine.jar
    09/25/2009  10:29 AM           453,829 CrystalReportingCommon.jar
    09/25/2009  10:29 AM         1,985,441 ebus405.jar
    09/25/2009  10:29 AM    <DIR>          external
    09/25/2009  10:29 AM           227,996 jrcadapter.jar
    09/25/2009  10:29 AM             9,988 jrcerom.jar
    09/25/2009  10:29 AM            94,180 keycodeDecoder.jar
    09/25/2009  10:29 AM           448,627 MetafileRenderer.jar
    09/25/2009  10:29 AM           380,520 rasapp.jar
    09/25/2009  10:29 AM           843,544 rascore.jar
    09/25/2009  10:29 AM           283,131 ReportPrinter.jar
    09/25/2009  10:29 AM           793,445 ReportViewer.jar
    09/25/2009  10:29 AM            95,382 rpoifs.jar
    09/25/2009  10:29 AM            40,545 Serialization.jar
    09/25/2009  10:29 AM             3,777 URIUtil.jar
    Let me know if there's anything we can do before engaging our third party vendor to produce their source code.
    Thank you - Kleber

    It's not relavent now is it? Do what ever works in CR XI.
    Also you may want to upgrade to CR XI R2. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    Once updated you can then go to the Keycode site and get a XI R2 keycode to enable oll of the features.
    Thank you
    Don

  • Thread pool throws reject exceptions even though the queue is not full

    Hi. I am using org.springframework.scheduling.concurrent.ThreadPo olTaskExecutor which is based on java
    java.util.concurrent.ThreadPoolExecutor
    with a enviornment under load.
    I see on some cases, that this thread pool throws tasks with reject exception
    even though the queue size is 0.
    According to the documentation, this thread pool should increase the pool size to core size and then wait untill all queue is full to create new threads.
    this is not what happends. for some reason the queue is not filled but exceptions are thrown.
    Any ideas why this can happen?

    This is the stack trace:
    taskExecutorStats-1 2010-04-27 11:01:43,324 ERROR [com.expand.expandview.infrastructure.task_executor] TaskExecutorController: RejectedExecutionException exception in thread: 18790970, failed on thread pool: [email protected]544f07, to run logic: com.expand.expandview.infrastructure.logics.DispatchLogicsProviderLogic
    org.springframework.core.task.TaskRejectedException: Executor [java.util.concurrent.ThreadPoolExecutor@dd9007] did not accept task: com.expand.expandview.infrastructure.task_executor.TaskExecuterController$1@141f728; nested exception is java.util.concurrent.RejectedExecutionException
         at org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor.execute(ThreadPoolTaskExecutor.java:305)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterController.operate(TaskExecuterController.java:68)
         at com.expand.expandview.infrastructure.proxies.DataProxy.callLogic(DataProxy.java:131)
         at com.expand.expandview.infrastructure.proxies.DataProxy.operate(DataProxy.java:109)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.operate(AbstractLogic.java:455)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterSingleChunkLogic.persistSlots(StatsPersisterSingleChunkLogic.java:362)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterSingleChunkLogic.doLogic(StatsPersisterSingleChunkLogic.java:132)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.execute(AbstractLogic.java:98)
         at com.expand.expandview.server.app.logics.ApplicationLogic.execute(ApplicationLogic.java:79)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterControllerDirect.operate(TaskExecuterControllerDirect.java:33)
         at com.expand.expandview.infrastructure.proxies.LogicProxy.service(LogicProxy.java:62)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.service(AbstractLogic.java:477)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterLogic.persist(StatsPersisterLogic.java:48)
         at com.expand.expandview.server.app.logics.stats.StatsPersisterLogic.doLogic(StatsPersisterLogic.java:19)
         at com.expand.expandview.infrastructure.logics.AbstractLogic.execute(AbstractLogic.java:98)
         at com.expand.expandview.server.app.logics.ApplicationLogic.execute(ApplicationLogic.java:79)
         at com.expand.expandview.infrastructure.task_executor.TaskExecuterController$1.run(TaskExecuterController.java:80)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.util.concurrent.RejectedExecutionException
         at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:1760)
         at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:767)
         at java.util.concurrent.ThreadPoolExecutor.execute(ThreadPoolExecutor.java:658)
         at org.springframework.scheduling.concurrent.ThreadPoolTaskExecutor.execute(ThreadPoolTaskExecutor.java:302)
         ... 19 more

  • After using my macbook for 2 years with same printer,all of a sudden I can't print a page doc even though printer is working and I can print from I/Mail, etc.Anybody had this happen and have a possible answer?

    After using my MacBook Pro and pages for 2 years with the same printer, all of a sudden I can't print a pages doc even though the printer works and I can print from I/Mail, etc. Anyone have a possible answer?

    Often printing problems are a sign of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages.

Maybe you are looking for

  • NF-es paradas no R/3

    Olá, Hoje pela manhã estávamos com um problema no ambiente e algumas NF-es foram geradas. Agora que a situação já  voltou ao normal e algumas dessas notas estão com status de em processamento. Quando vamos consultá-las no GRC, não consta nenhum regis

  • T400 takes too much time to start or shutdown

    I got a lenovo thinkpad T400, everything seems to be fine but lot of issues. 1. It takes too much time to start or shutdown (I purchased 2GB turbo memory along with the system for $50, but no use).My  system is slower than 2.2 GHz(mine is 2.53GHz) 2.

  • Want To Lock A MacBook Screen Instead Of Putting It To Sleep?

    The best way I found is to make a hot corner to start the screen saver. Then, you don't have to log off and stop all your services. You just come back and click the screen, enter your credentials, and... BOOM! that's it!! Here's where you start. Clic

  • Can we show compound view in View Selector

    Hi All, I am in 10.1.3.4.2, I am just wondering if we can show a compound view in the view selector?. I tried doing that but couldn't so just wanted to ask the Gurus if there's any workaround Thanks, Ronny

  • TS5180 I have no audio from my iPhone 5 except for the ringtone.  Wondering why.  Hellllllllllp!

    I have no audio from my iPhone 5 except for the ringtone.  Wondering why.  Hellllllllllp!