Print Jobs Stopped & Cannot Start

Canon BJC-8200 USB Printer
From within any application, after completing the Page Setup, and choosing Print, completed choices... then click on Print.
Going to Printer Setup Utility, my printer shows, Jobs Stopped. I click on Start Jobs. For just a moment, it appears the job is starting, then suddenly it shows Jobs Stopped.
Using the installed Canon driver software (up to date), and in BJC-8200 utility, it shows Jobs Stopped. I repeat the steps as with Printer Setup Utility, and get the same results...
Both utilities show my printer and show Jobs Stopped.
PBti 660 G4 Mac OS X (10.4.4) Canon Driver v1.4.3 for Mac OS X

Try these generic steps one at a time:
Delete and re-ADD the printer(s) in Printer Setup.
Repair permissions (Disk Utility).
Delete Print Prefs - search for (File>Find) files that start with com.apple.print and delete them all and reboot.
Reset Printing System (new in Tiger) - In Printer Setup, click this menu item found just above Quit Printer Setup.
If there is a downloadable Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD.

Similar Messages

HP 1522nf printing job won't start

Hi:
I have the HP 1522nf. I always leave the printer power on. Sometimes like once a month, the printer job will not start. I can still go into the printer setting website. (192.168.1.x) But whenever I print, the transfer will stuck at about 68.2kb, and just won't print anything. I have a restart the printer, and then everything is back to normal. I also tried to unplug the printer's network, it will print out eventually just right after I unplug it. And then print out a error message saying "syntax error" offending command: --nostringval--. What's the problem here?
I have the newest firmware.
Thanks.
Message Edited by cpthk on 01-15-2009 05:39 AM
Message Edited by cpthk on 01-15-2009 05:49 AM

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter.
Browse down to the print spooler service, right click it and select Properties then click on the Stop button.
Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Print Jobs won't start

After several years of trouble-free printing from my Blue Dalmation iMac to a HP Deskjet 630 printer, it's all suddenly gone wrong.
Recently I zapped my PRAM and ever since I've been unable to get the Print Jobs to start. Every time I click 'Start Jobs' it immediately goes back to 'Print Jobs Stopped' and nothing will print.
I went into the Printer Setup Utility, hit Reset Printing System and tried to add the HP printer again. But when I do that I get "Error:-9672".
Someone please help! I can't print anything at the moment and I'm in a right old stew without a printer!

Hi again!
Right - I've sorted out the repairing permissions problem (I had indeed accidentally trashed the BaseSystem.pkg - I replaced it from my laptop and all is fine).
Having done that I repaired permissions, rebooted both my Mac and the printer...
But I still get exactly the same error message when trying to add the printer.
Could this be something to do with HP Printers and the latest OSX Security Update? I've noticed a couple of HP printer users further down this part of the forum seem to have had the same problem.

Print Jobs Stop on HP Laserjet 3500 after installing Tiger 10.4

The printer worked great before installing Tiger 10.4...I even upgraded to 10.4.7, but it still won't print.
I have CHANGED USB...RESET PRINTER...deleted/added about 12x...REPAIRED DISK...done everything stated in troubleshooting, but still, my printer jobs STOP and won't print in ANY APPLICATION.
HELP!

OK Paul,
Did the Terminal thing and here is what it said:
usr/libexec/cups/backend/usb
DEBUG: Unable to load USB class driver (-9664), using generic class driver instead
direct usb "Unknown" "USB Printer (usb)"
direct usb://Hewlett-Packard/hp%20color%20LaserJet%203500?serial=00CNBRN07061 "Hewlett-Packard hp color LaserJet 3500" "hp color LaserJet 3500"
As for the CONCOLE info:
I [11/Sep/2006:15:55:59 -0400] Job 1 queued on 'hpcolor_LaserJet3500' by 'micheley'.
I [11/Sep/2006:15:55:59 -0400] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 251) for job 1.
E [11/Sep/2006:15:56:24 -0400] [Job 1] fatal: Opening Printer Connection Failed: Unable to open the printer connection. Please check your printer connections and check for printer errors.
I [11/Sep/2006:15:56:25 -0400] Saving printers.conf...
I [11/Sep/2006:15:56:25 -0400] Printer 'hpcolor_LaserJet3500' stopped by ''.
E [11/Sep/2006:15:56:26 -0400] PID 251 stopped with status 85!
I [11/Sep/2006:15:56:26 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
I [11/Sep/2006:16:14:10 -0400] Job 1 was cancelled by 'micheley'.
I [12/Sep/2006:10:49:37 -0400] Saving printers.conf...
I [12/Sep/2006:10:49:37 -0400] Printer 'hpcolor_LaserJet3500' started by ''.
Hope this helps - it's all Greek to me!
Thank you,
Michele

Print job stops

I can print on my Epson R2400 from Photoshop when I go to External Editor, but whenever I try to print via Aperture, the print job stops.
I've been printing successfully with earlier versions of Aperture. I've reinstalled Aperture 1.1.2 and I've deleted and added the R2400.
Thanks

Try reading through this thread and see if anything looks similar to your case:
http://discussions.apple.com/thread.jspa?messageID=1995114&#1995114

Airport Express HP6500, print job stopped errors

Looks like this is a re-occuring theme and many posts here indicate it's a common problem with Cannon Printers, but I'm using an HP 6500, and have been for over a year with no probelm. Now I get a print job stopped message, and when I try to restart the job, I am told a connection could not be made.
I have tried deleting and re-adding the HP - no luck.
Any suggestions?
Thanks

OK - so the printer is a 6540, but in the print area under preferences, it calls it a 6500 - what gives?

HP 1505n - Print Jobs stop when sent to queue

I recently purchased an HP LaserJet 1505n for my home office. I have several Mac's all running 10.5.1 all connecting to it. Most print to it via the network (Bonjour) but I do have 1 Mac hooked up directly via USB to the printer. So, both the USB And Network Interfaces are being used on the printer (which is why I bought it).
Every now and then when I try to print, the print job just stops immediately in the queue. When I try to restart it, it stops again. Sometimes physically resetting the printer works, but rarely. I have also deleted the queues and re-added them. Nothing seems to work. It seem that Adobe Acrobat files never print, but Firefox will always. (Strange...)
I have read a few other threads on this issue and they all mention that it is a driver issue from HP. I have try to get the OpenSource drivers, but I have not found any for the HP 1505n.
Below is the /var/log/cups/error_log. Does anyone have any suggestions or recommendations? Do I just wait for an OpenSource driver or HP to update their drivers?
Thanks!
-Rob
E [16/Jan/2008:22:07:47 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n device-uri to "file:///dev/null" (was "file:/dev/null".)
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-is-accepting-jobs to 1 (was 0.)
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-state to 3 (was 5.)
I [16/Jan/2008:22:07:47 -0800] Saving printers.conf...
I [16/Jan/2008:22:07:47 -0800] New printer "HPLaserJetP1505n" added by "rneumann".
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-is-shared to 1 (was 1.)
I [16/Jan/2008:22:07:47 -0800] Saving printers.conf...
I [16/Jan/2008:22:07:47 -0800] Printer "HPLaserJetP1505n" modified by "rneumann".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding start banner page "none".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding job file of type application/postscript.
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding end banner page "none".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Queued on "HPLaserJetP1505n" by "rneumann".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /usr/libexec/cups/filter/pstoappleps (PID 812)
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 813)
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 814)
E [16/Jan/2008:22:08:07 -0800] PID 814 (/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr) crashed on signal 8!
I [16/Jan/2008:22:08:07 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
E [16/Jan/2008:22:08:07 -0800] [Job 2] Job stopped due to filter errors.
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding start banner page "none".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding job file of type application/pdf.
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding end banner page "none".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Queued on "HPLaserJetP1505n" by "rneumann".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 833)
I [16/Jan/2008:22:09:22 -0800] [Job 3] Completed successfully.

This is what I got from HP...need to grab CVs and Libraries Folder from a PowerPC mac.
and...it works!
Intel Mac fix for Office 2004
1. On a computer that can still print using Office 2004, go to HD>System>Library>Printers and control+click on Libraries and Create Archive. In the same location, control+click on the CVs folder and Create Archive. Save these Archived (zip) folders to the Desktop.
2. Copy these two Archived (zip) folders to the Intel Mac that cannot print. *note – you will need a network connection to the computer or a flash drive.
3. Make sure you quit all applications including Safari, Entourage etc.
4. Create a New Folder on the Desktop of the Intel Mac (Name this folder “Backup of Libraries and CVs”)
5. Open the Macintosh HD>System>Library folder and control+click on the Printers folder and select Get Info. Click on Name & Location and set the permissions for Everyone to Read & Write.
6. Open the Printers folder and drag the Libraries and CVs folder to the new folder you had just created to backup the old files.
7. Extract the Archived Libraries and CVs folder you have copied to the Intel Mac by double clicking on the folders.
8. Copy the extracted Libraries and CVs folders to the Printers folder (You will be asked to authenticate the copy)
9. Restart the Computer.
10. Open Disk Utility and select your Macintosh HD Volume. Select Repair Permissions.
11. Open a MS Office document and print to verify the issue is resolved.
Message was edited by: mobious74

Print Job Stopped on HP1300 using APEX

Hello,
I noticed several user have problems with their printer connected via Airport. Mine used to work fine, until I changed my internet provider two weeks ago and had to input the new details, and re started the APEX. Internet is working very well, so does ITunes wireless, just when I send a print job, it just stops. It is recognised via Bonjour, but does not responds. Printing works fine via USB. Are there any settings I overlooked?
I have an IBook bought May 2005 with Tiger from Apple Store Germany together with printer HP1300 and several Airport Express Stations.
I appreciate any help!

Hello Henry,
all Airport Stations are recognised. I just connected the printer to the station in the living room, listen to music from ITunes right now, printer is recognised connected to this Airport Station, but the print job still stops.
It is frustrating, and a hassle to connect the printer via USB each time you need to print......BUT....nothing compared to the hassle I had with "other" operation system LOL!
Thank you for your reply

HP LaserJet 5si won't print -- jobs stopped

Mac G5 OSX 10.4.x
LaserJet 5si with 2552 Jet direct card
Networked via Linksys switch
I lost my internet connection to all computers yesterday and ended up having to reset my Linksys Router. Now everything works except this printer which is connected to the router through a workgroup switch. Printer shows up in Printer list. Jobs get spooled to printer. I get a message that jobs for this printer are stopped. When I click "start" it looks like it is printing, but then shows up as "jobs stopped".
Apple Talk is active. Disk Utility did a repair disk permissions. I have taken the Jet Direct card out and reinstalled it. I have reinstalled the LaserJet drive software.
Can anyone help me???
Marjorie

I am having the same problem with my Espon Stylus CX6600, but only with certain programs. Dialatech told me to go into Page Setup and make sure where my printer was selected under "Format for." Don't know why it wouldn't work when "Any printer" was selected, but it worked great for a couple months. The problem's back now, even though my printer is selected in the "Format for" thing, but maybe this will help for you. Please post if you come up with any other solution!

Print job stopped without reason

hi, i am connected to a network printer. whenever i try to print the job is stopped unexpectedly and no error message is given. It just says: "Job stopped" in the printer window and stays in the active queue. if i click "start jobs" at the top it starts again and stops again. With out reason. The printer driver are installed. The kind is NRG DSc38u PS
Hope somebody can help.
thanks

When ever I have this problem I restart the printer by unpluging it and waiting for about 30 seconds. Then if that doesnt work, go hook the printer directly up to the computer and make sure that someting is not stoped in the printer que.
I hope that that helps you.

Print Jobs Stop -- First w Panther, Now w Tiger and New Printer!

I was dealing with multiple problems, so I'm not sure where to start. I was using a G4 with Panther when, among other things, I could no longer print because anytime I sent something to the printer the job would stop. Trying to start it again didn't work. My hard drive crapped out (separate issue I now realize) and I had it replaced w/ a new hard drive installed with Tiger & also purchased a new printer. I installed the new printer (for now I have it connected directly via USB) and to my surprise and chagrin I still can't print for the same reason! The job stops immediately after I send the document to print. Trying to re-start, or deleting and printing again, etc. does nothing. I've been through all the troubleshooting tips on the support page and am at wit's end. The problem doesn't seem to be specific to an application, an OS, or the printer. The Mac guy who set up my new hard drive did save as much as possible from the old one & migrated it to the new. He must have transferred the glitch, but what could it be? Please help.

Thanks a lot Greg.
I had problems printing to shared printer which was connected to my mac downstairs from my powerbook over airport. Kept on coming up as printer stopped. I turned all off and on, reinstalled drivers, deleted printers, and nothing worked 'till I found your tip.
I love the mac community, keep up the good work.
Peter

Print jobs stopping for no reason

Hi,
For some reason print jobs simply stop when sent to server print queues. The client queue shows "Connecting to 192.168.1.201 at port 631..." when the job is sent, then it halts & the job sits in the queue.
I've tried recreating the queues by deleting the printers from the server system prefs, adding them in again (as both LPD and IPP) by specifying their IP addresses. Does it matter what I spec for the queue name? Is it better to use the default or something that matches
There's some suspicious stuff in the print service log (see below), such as "shared == 0" for each of the queues & the final "master LPR sharing state = 0" after rebooting the server. If these are the culprits, how do I change the sharing state?
I [21/Jan/2009:10:51:34 -0800] Starting Print Service (v10.4.140)
I [21/Jan/2009:10:51:34 -0800] Verifying server resources...
I [21/Jan/2009:10:51:34 -0800] ...restoring server default: UseNetworkPrinters = NO
D [21/Jan/2009:10:51:34 -0800] setting Use Network Printers = 0
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service IPP
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP master sharing state = 1
D [21/Jan/2009:10:51:34 -0800] setting IPP sharing = 1
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service LPR
D [21/Jan/2009:10:51:34 -0800] Registering queue "1st Lab - HP LJ4000 laser"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] Registering queue "2nd Copy - Canon IR5055 copier"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] Registering queue "2nd Staff - Brother HL8050 laser"; service = LPR; shared == 0.
D [21/Jan/2009:10:51:34 -0800] setting master LPR sharing state = 0
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service SMB
D [21/Jan/2009:10:51:34 -0800] sync'd with smbd for configuration reload
I [21/Jan/2009:10:51:34 -0800] Starting sharing for service PAP
I [21/Jan/2009:10:51:34 -0800] Print Service startup completed
I [21/Jan/2009:12:14:10 -0800] Re-loading Print Service settings after restart.
D [21/Jan/2009:12:14:10 -0800] setting master LPR sharing state = 0
What am I doing wrong? Any help would be appreciated, even a pointer in the general direction.
Thanks,
Roland

Tiger: Start Applications/Utilities/Printer Setup Utlity
Menu: Printer Setup Utlity/Reset Printing System...
Leopard: System Prefs/Print & Fax/Right(Ctrl)-Click on Printer/Reset Printing System...

Print Jobs Stopped, Again...

I really need help with this one; it has plagued me for years with 3 different computers and 3 different HP printers. I've read all the related posts with solutions that have worked for others, but now, none will help me. I've tried deleting and re-adding the printer; permissions repairs; Print Setup Repair; creating new accounts; complete print reset; deleting all HP driver; re-installing drivers; followed the step-by-step from HP - nothing has helped.
As with others, the queue stops after starting.
I need to know if this is an HP problem or an Apple problem (right now it's my problem). If I have to buy another printer, I will. But I don't want to buy another printer and have the same problem.
Thanks
Ken
Powerbook G4 Mac OS X (10.4.8) HP 830c

Welcome to the Discussions Ken,
That can be frustrating. I find that most HP direct connect printer problems can be solved by unplugging the printer from the computer and AC for a few minutes. Restore AC then attach to computer. What I see often is the printer stops talking to the computer.. thus it stops the que.
If the AC trick doesn't work, then I: logging out and in again; deleting the printer and adding it again; reinstalling/updating drivers.

"Print jobs stopped" message

All of a sudden, when I command print a message box comes up "Printing jobs on this printer are stopped". I haven't changed any settings that I know of. Also... my Print Setup Utility is apparently gone from my applications. When I double click it in my applications or from my system preferences it doesn't come up. It just flashes and disappears so I can't change the settings to "resume jobs" or anything.
Help!

We have a Mac workstation recently updated from 10.3.9 to 10.4.11. A document can print just by clicking the Print icon. However, if using FILE/PRINT so that a tray can be chosen the whole application crashes. This happens with every application Word, EXCEL, iCAL, etc. Why is that? I deleted and recreated all printers on the workstation and the same thing still happens. The iMac is a 17" G4 model.
Help!!

Print Job Stopped on Xerox 7750 IP Printing but not AppleTalk

We have a bunch of Xerox 7750s setup via IPP. When we upgraded to 10.5.2 all print jobs sent to them appear in the cue as Stopped. When I re-setup some of the print cues via AppleTalk most of them work, but not all. I've tried the firewall suggestions mentioned here
http://discussions.apple.com/message.jspa?messageID=6765428#6765428
with no success. Sharing printers is out of the question. I'm not a fan of AppleTalk, but if it's the only way I guess I could give it a try.
Any suggestions on how to get my IPP to work?

Hello Henry,
all Airport Stations are recognised. I just connected the printer to the station in the living room, listen to music from ITunes right now, printer is recognised connected to this Airport Station, but the print job still stops.
It is frustrating, and a hassle to connect the printer via USB each time you need to print......BUT....nothing compared to the hassle I had with "other" operation system LOL!
Thank you for your reply

Print Jobs Stopped & Cannot Start

Similar Messages

Maybe you are looking for