Print Label To DVD version 12

Hi,
I am a newbie. I finally completed a video in Premiere Elements 12.1. Now I have created a label in Photoshop Elements 12, but could not find out how to put it on my DVD in the manual. Can someone help and give me directions.
Thanks,
Don

Hi All,
I saved label as a jpeg. I am sorry to say I am stuck again. (A lot going on right now) I am trying to make back cover for jewel case for DVD with a sky background, my Logo, and some text
I started with the sky background (jpeg) from my picture library Then I clicked on the "T" icon on left side of panel in Photoshop Elements 12
I entered the text, changed the color of the font. Then I wanted to upload my logo, but there was no option to put a picture onto the part of the sky background.
I then made the sky with text cover just the top half of the background, hoping to duplicate the sky on the bottom half, and add my logo to that but nothing worked. I better stop explaining as I will probably confuse you, if I haven't done that already.
As usual, any help will be appreciated.
Don

Similar Messages

Printing image/label on DVD?

I am in the midst of creating a handful of DVD's through iMovie/iDVD (09') from the last 3 years of filming (kids/vacations etc.). I would like to know the most straightforward way to print on the DVD itself so I have an end product that is a little nicer than using my permanent black marker and poor penmanship. In my searches I have come across the names LaCie, Lightscribe etc. but I don't quite know how it all comes together. (i.e. do I need to buy a specific printer, download specific software etc.) I'm guessing the answer is yes to both. I only plan on doing a couple of dozen DVD's so I don't want to spend lots of $ on a printer if I don't have to. I called my local Staples and they don't offer such a service. Thanks a bunch.....

Q: I'm guessing the answer is yes to both.
A: You guessed right. Perhaps these links might help you:
http://discussions.apple.com/thread.jspa?messageID=10909114&#10909114
http://smilesoftware.com/DiscLabel/
http://www.iwascoding.com/uncoverit/index.html
http://www.lightscribe.com/gettingstarted/index.aspx?id=87
http://www.lacie.com/technologies/technology.htm?id=10024
The alternative to printing your own and avoiding expensive printer, ink, and media purchases is to find a local facility willing to do this for you. But I have found from experience that after the first one or two out of house orders (depending on volume) that it's better / more cost effective to invert in my own printer and media.
Hope this info helps. But if not just come on back for more advice.
Message was edited by: SDMacuser

HP Officejet Pro 8500 A909g Series capable of printing labels on the CD?

I have Sure Thing label software that can print label information on a printable CD if the printer has the capability. Not able to find any HP doc confirming whether it does or does not. Anyone know for sure? Thx.

Hi,
No, it can NOT print on printable CD/DVD's:
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/18972-18972-238444-3328086-3328086-3752454-3752460.htm...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Best practices for printing on a DVD?

I have Taiyo Yuden printable white (inkjet) DVDs and an Epson R280 - getting ready to try printing on the DVDs and was wondering any best practices?
- Print on the DVD before burning or after?
- Should I use the Epson software or is there an outside program that is better?
- Any other tips?
Thanks!
Alexa

Hi Deborah -
Welcome! As Eric says above, never put labels on your DVDs. In many cases, the adhesive can eventually cause problems and irrevocably damage the disc.
So, going with "labeling" as in putting information on the disc about what it contains, these days, a regular consumer can actually just use an inkjet printer that offers the ability (usually a special tray). I have an Epson Stylus Photo R280 (and there are other Epson models), there are several HPs and a few Canons. My printer was actually free with a digital camera from Circuit City but would have retailed for $149 at the time, so they aren't really all that expensive. Just search for printers with that function and you'll find all your choices.
Then you want to buy inkjet-printable DVDs or CDs and you're off (and there are a bunch of options there - I found it easier to order online to get a good quality, long-lasting DVD that is inkjet printable - the supplies at the local office stores were not good)! Usually your printer comes with software to do the design/print but then Old Toad has a great recommendation above.
I'm printing with a new "watershield" DVD from Taiyo Yuden (which is known for it's quality and are long-lasting, up to 75 years, not that we'll be on DVD players then!) which makes an inkjet print "unsmudgeable." There are a few other brands like that or some people use a spray on them because the downside to inkjet is that it can smudge if you touch with moist fingers or if anything wet touches it. Water shield DVDs are magical, I've found - makes a glossy print (even though inkjet) and locks in the design so it's smudgeproof. Still they are more expensive than others. I'd probably search around the forum here or other forums on DVDs and CDs if you want to look into them more.
Good luck!
Alexa
p.s. I was told that if you absolutely can't print on them, then to use a thin Sharpie with minimal writing on the DVD. I think some stores sell "DVD safe" pens but I've never been convinced that they are anything but a sharpie at a premium price - maybe someone else on here will know.

Print to a DVD disck Help

Please help,
After I finish the artwork I am trying to print to a DVD disk from the illustrator.
The printer
Epson stylus photo R300
For some reason I cant figure out how to setup, I been damage 5 disks already, it print out of the center of the DVD or at the bottom, or at the right side, or at the left.
Please any advice I will appreciate
lbk

"How to create Print Areas for CD / DVD Labels" #1, 6 Jan 2008 3:08 pm

Why under print settings, media type, CD/DVD is grayed out? I cannot print on the DVD directly

I have Photoshop Elements 6. Trying to print pictures on DVD. But under the Media options for printing the CD/DVD option is grayed out so I cannot click on it? any ideas?
Thanks

silviosperber wrote:
I have Photoshop Elements 6. Trying to print pictures on DVD. But under the Media options for printing the CD/DVD option is grayed out so I cannot click on it? any ideas?
Thanks
Are you tyring to write your photo files to a DVD ?
Or are you trying to print to a paper label on a DVD disc?
Also, I suggest that you describe the process that you are attempting (like which menu commands or buttons you used).

Since upgrading to lion and updating HP software my printer (photosmart D5160) will not print to CD/DVD when I try it says my printer doesn't support CD printing. any help will be welcome

Since upgrading to lion and updating HP software my printer ( HP photosmart D5160 driver 3.3.0) will not print to CD/DVD,when I try it says "your printer does not support CD printing". any help will be welcome.

I see those are old posts above but I'm just now having the same problems. I have the original software CD that came with my Photosmart D5160 printer but I can't load it. I get the message "You can't open the application "HP Installer" because PowerPC applications are no longer supported". So I don't have that going for me, which is not nice! But I couldn't really care less about that if I can just find a CD labeler software that will print from my Mac to the D5160. I'd rather by new CD labeler software than a new printer. I've tried a few free CD labeler software downloads, including iWinSoft Label Maker, but nothing has worked so far. I think there's an answer somewhere; I'm able to print documents on regular paper using this printer, but I only bought it (many years ago) to print CD labels and some pictures. It's been used only sparingly and it's been in storage since I bought my Mac 3 years ago, mainly because a I got a free printer with my purchase. Any help is vertainly appreciated!!!

Printing labels (barcode, datamatrix code, ...) with LabView via Codesoft

Hello together,
could anyone post a sample vi which enables printing labels (barcodes, datamatrix code, ...) with LabView
via the Teklynx Codesoft Runtime Software? There are no sample programs from Teklynx for LabView.
Many Thanks for your help, Thomas.
Message Edited by maximint on 01-04-2007 10:04 AM

maximint wrote:
Hi JLS,
thanks for the answer. I agree with you that closing the references is the best und most stable solution. But it is really slow. I made an exe but this is also slow.
But apart from this, the VI is running well, even with a handing over of variables. I guess this is one of the first VIs in the net which combines LV with
Codesoft from Teklynx.
Thanks, Thomas.
PS: I made a wrong click on the rating of your last post. Sorry. I guess I rated it too bad.
Well, this is easily solved with an intelligent global buffer VI or as they are also often called a LabVIEw 2 style global. I use them quite often for all kinds of reasons including to avoid globals in my programs almost 100% but this is one of the cases where they are also very handy.
Basically you write a VI that has a while loop, and a case structure inside. The while loop normally only executes once. One or more uninitialized shift registers store different values that can be reused on each call to that VI. The case selector is wired to an enum (I make them always strict typedefed) on the front panel and that one is connected to the connector pane of the VI.
Make the enum have init, print, close items and in the respective case frame do the opening of the refnum in the init case and anything else you need to do once at initialization time storing the refnum to the right shift register terminal. In the close case do everything to close done the software and then close the refnum coming from the right shift register terminal itself passing a Not A Refnum to the right shift register terminal. The print case uses the refnum from the right shift register terminal too, does all that is necessary to do printing and then stores the refnum back to the right shift register terminal. You now have an intelligent manager function for your interface to the printing software.
The init case is called somewhere during initialization of your application while the close case is called somwehre when you close your application. A variant is to combine the init and print case but forst test for the refnum to be Not A Refnum (comparison palette) and in that case do the initialization first, otherwise just do the printing. The advantage with this is that the Codesoft interface is only initialized if you really need it.
There is one caveat for this if you use dynamic top level VIs to implement for instance test steps or deamon like operation. LabVIEW remembers the top level VI under whom a refnum was opened and automatically closes refnums when that top level VI goes idle (stops running). So you would need to make sure that the initialization is done in the main hierarchy that is guaranteed to run for the entire time that your interface is required.
I have included a small archive containing an API for Codesoft 7 that also supports variable query and substitution in templates. It is an older version of something I'm currently using and not very well tested as is, but the newer version is a lot more involved and complicated and not suited to be put here. I also included another archive showing a version of such an intelligent manager buffer function using that API.
Rolf Kalbermatter

Alignment problems printing direct to DVD with Epson R220

I know this question isn't specifically related to iDVD but I wondered if someone could help please?
I recently bought an Epson R220 printer to print direct to DVDs created with iDVD as I know labels stuck onto DVDs are best avoided.
However, using both the bundled Epson Print CD software and 'disclabel', I find the print is about 1cm off centre. I'm really surprised by this, as I thought these machines would just work out of the box - detecting through the software where the centre of the DVD is? I've tried everything to remedy this (including the position adjustment within Print CD which allows up to 5mm fine-tuning). The problem is I need more than fine tuning - the print is way off!
I'd be interested to hear from anyone who has an R200 or R220 and might have had a similar problem as I've spoken to Windows users with the same printer, who report no such hassle.
Many thanks,
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.4.7)

Thanks Hardy - really appreciate the links to the Epson site. I've tried using the manual settings as you suggest, and I've certainly witnessed a vast improvement. Basically, it seems that if I alter the position adjustment slightly and then opt for a manual print, the disc is centred no problem. It isn't quite up to the edge of the disc - there's about a 2mm gap, using one of the templates from the Print CD app. Have you noticed this also - or does the image print right up tight against the edge of the disc?
If I go back and opt to just 'Print' from the first menu that appears after selecting File>Print, (i.e. not using Manual to print) the image is consistently about 15mm off centre - I've tried this on a dozen tests. However, using 'Manual Print' this isn't the case. I wonder if there is a glitch here in the latest edition of EPSON Print CD (V1.4), in that you seem unable to specify 'Page Set Up'?
I've also gone back to the excellent disclabel application. Here I find that if I change the 90% default under page set up, to 100%, the disc is also aligned correctly.
Thanks very much Hardy for taking the time to work through this one with me - much appreciated.
Ant
G5 2GHz dual, PowerBook G4 Mac OS X (10.4.6)

How to print labels from my Christmas card list?

Does anyone know how to print labels from the Christmas card list in Contacts?
I am new to computers and having managed to type in all my addresses I was hoping to print some labels! Please can anyone help!

Welcome to the Support Communities. What version of OS X is your Mac running? ...Click on the  menu at top left of your screen and choose About This Mac. Note the version in the form 10.n.n and then see this ASC tutorial:
Update your product list
Then see this Apple doc, which is for OS X 10.9 (Mavericks)...
Contacts (Mavericks): Print contact information
...Found by searching here:
http://support.apple.com/kb/index?page=search

Print to to DVD/CD

i have a C5280. It has a DVD/CD tray for printing directly onto DVD/CD. How do I do this? There doesn't appear to be anything in the CD supplied with the printer

hi I use express labeler pretty sure it came with the printer but i think you can down load a basic copy hope this works for you

Print label upon GR

Hi
I need to get a pop up for printing Labels upon GR. The label will have the material number and the bin number on it. Can someone help me with what all settings I need to do inorder to make this happen.
Any help is appreciated
Thanks
Vijay

If still not working then check all the settings as below
Pls check the below settings for material document Print out:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Hope it will help you.
Regards,

When I make a Book in Aperture and print a PDF proof version, all the modified photos (marked with Badges) are totally distorted. What is causing this? All other - non-modified photos - appear to be fine.

When I make a Book using Aperture 3 and print a PDF proof version, all images that have been modified within Aperture are distorted in PDF form. All other images appear ok.

As if only the corrected layer would have remained on the photos.
So the geometry of the pictures is correct - they are not skewed or something? Only the colors and intensities are wrong?
. Only in printing when it is converted to PDF file some photos are unrecognizable.
Is it the printed pdf or the pdf viewed on the screen? If it is the printed copy you need to fix your print settings.
Does Aperture give a warning, that the high resolution images are not available?
We had some cases of books not being able to be printed, and that was due to a broken reference to the original files. Only the book could not access the originals, all other parts of Aperture could. To check for this, try to add one more adjustment to one of the images in question. Is it possible? Are the edits reflected correctly in the pdf of the book?
We were shooting with 3 cameras, Lumix5 shooting RAW, Cannon 100 shooting JPEG and SONY alfa850 shooting RAW.
Have you tried to reprocess the raw of the edited images? (Photos > Reprocess Raw)
Also try, to remove one of the images from the book and to add it again. That usually helps, if Aperture has lost the connection to the originals used in the book.
If you no have done so already, repair (and if necessary rebuild) the Aperture library.
See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Regards
Léonie

Print labels row*column wise

Hi Gurus,
We have a requirement to create a report which will print labels (RTF layout using XML publisher). Our client wants supplier information (labels, single label of 8 lines) to be printed on a single page i.e. on A4 size paper, 3*8 = 24 labels should get printed like- (Below Lxy is a single label with 8 lines, x and y denotes numbers below)
L01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
L13 L14 L15
L16 L17 L18
L19 L20 L21
L22 L23 L24
This will be a nightly job and once client will come in the morning all the labels will get printed on the A4 size papers. These number of labels in a single request may vary as well eg- it can be either 4 during one night or 29 during another, so this has to be taken care while printing.
I can not call it as a matrix report as number of rows and columns may both get changed dynamically.
Is anybody came across the same requirement? Please provide your valuable inputs.
Thanks in advance.
Rgds,
Sumir

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How do I get spouses and children on to printed labels and envelops?

I store spouses and children in the fields provided for these names. When I go to print labels, Address Book puts the primary name and one randomly selected child name on the first line. So if the person is Jane Smith, I have her spouse listed as John, and two kids listed as Jake and Janice, the label will read.
Jane Smith and Janice
142 Main St.
Nowhere, NH
Can I get the spouse name and the other kids to show up? How?
+Also, any tips on dealing with couples with two last names? That's more of a data entry question, but if anyone has ways this works for labels but also for logical address book and iPhone look up.+

Turn iCloud contact syncing off and choose keep when prompted.

Print Label To DVD version 12

Similar Messages

Maybe you are looking for