Print message not processed

I am able to take a print preview and print after attaching the custom message in purchase order but after saving it .
The message says that it is still in process and it is not processed.
Any idea where to check and where is the problem

check sp02 whether processing has been completed or not..also try this...
check the output immediately check box when pop up for print options are displayed..after that save it try again n see what happens

Similar Messages

  • Proxy messages not processed in PI 7.1 pipeline coming from local client

    Dear experts,
    We have recently installed a PI7.1 system with two clients:
    200 - Integration Server
    250 - Local Integration Engine
    Now, when we send proxy messages from the 250 client to the 200 client,
    the messages are not processed in the integration server. The message
    does arrive as we can see in SXMB_MONI, but there is no receiver determination
    or what-so-ever executed. In SXMB_MONI we can see that only the SENDER
    pipeline is executed.
    Proxy messages from 6.20 and 7.0 systems to IS are properly processed.
    Ofcourse the 250 client is defined as an application system in the integation engine
    configuration (SXMB_ADM).
    regards,
    Jeroen

    In SXMB_MONI we can see that only the SENDER pipeline is executed.
    Yes. Even if no receivers are configured the data from sender to XI should be visible in sxmb_moni.
    Check smq1 at XI. There could be some problem with the technical system for client 250.
    Regards,
    Prateek

  • Message not  processed after technical routing

    Hi ,
    I have a SOAP ->ABAP Proxy (R/3) scenario that sometimes not processed completely. When checking the message in SXMB_MONI I notice a grey dot (which means log version) in the status column next to the message,  Upon opening the message I can't see any errors.
    The message has gone through the following steps.
    Inbound Message
    Receiver Identification
    Interface Determination
    Message Branch According to Receiver List
    Request Message Mapping
    Technical Routing
    But final stage call adapter not executed so i came to know that response message not reached to XI.
    This is occuring once or twice for every 25 to 30  messages.
    Can any one provide some suggestions to rectify the above issue.
    Thanks & Regards,
    Arun.

    Check out the below things,
    1. Check for which input data it is giving. (Any specific data).
    2. This may happen becaus of time out. (Huge data processing)
    Also check out below link,
    ['Log Version' status in 'SXMB_MONI']
    Resend the message from sender and it will work properly.
    Log version means "Waiting for response" and liable to fail if response not received on time.
    Edited by: Siddhesh Pathak on May 13, 2009 12:10 PM

  • XML messages not processed

    Hi all,
    I have a problem in my FTP folder. I have a text file to be processed as XML messages in XI. The problem is, it's not processing. The text file goes straight to the archive folder without processing it to an XML file. It's not in sxmb_moni and smq2. I'm not sure what happened. It was being processed before.
    Thanks.
    Regards,
    IX

    Check your sender file adapter status from the Communication channel monitoring on your Runtime Workbench.
    Thanks,
    Pooja Pandey

  • BPM :: Messages not processed at outbound side

    Hi Experts,
    We have 1000+ synchronous messages with BPM  for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
    inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
    The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
    Now we would like to know which workflow thrown the exception and what they have done during manual operation.
    And how to process the remaining holding messages.
      Thanks in advance for you ideas and suggestions.

    Hi,
         As you pointed out in your post that     
    "inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
    Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
    You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
    Payload-Dependent  => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
    Time-Dependent   => The loop finishes at a specified point in time.
    Message-Dependent => The loop finishes when a specific message is received.
    Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
    The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
    Your BPM cannot be time dependant, otherwise it would have completed processing by now.
    Either your BPM is message dependant or payload dependant. You need to find this out.
    Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
    Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
    Check if this message has arrived or not.
    If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the  expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting  state.
    regards
    Anupam

  • Messages not processed from IP_OUT_QUEUE

    Hi all,
    I have enqueued the message to IP_OUT_QUEUE and consumer as B2BUSER. Still the message are not getting processed from the Queue. From the b2b.log, I see the following statements "***B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
    What could be problem... It used to work before... Nothing has changed after that.... any clues??? I am using 10.1.2
    2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Purge Size = 3000
    2009.09.08 at 23:43:33:449: Thread-9: Repository - (DEBUG) Cache Load Factor = 0.75
    2009.09.08 at 23:43:33:452: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
    2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
    2009.09.08 at 23:43:33:453: Thread-9: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
    2009.09.08 at 23:43:33:455: Thread-9: Repository - (DEBUG) CatalogMetaManager getDriverjava.lang.InheritableThreadLocal@2f0df1 oracle.tip.repos.core.driver.CatalogDriver@2e323
    ***2009.09.08 at 23:43:36:433: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter***
    ***2009.09.08 at 23:43:37:016: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages***
    ***2009.09.08 at 23:43:37:020: Thread-9: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message***
    2009.09.08 at 23:44:03:091: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
    2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (DEBUG) Persistency manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
    2009.09.08 at 23:44:03:092: B2BStarter thread: Repository - (INFORMATION) Entering Use Case: queryConfiguration
    2009.09.08 at 23:44:03:092: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
    2009.09.08 at 23:44:03:093: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
    2009.09.08 at 23:44:03:093: B2BStarter thread: Repository - (INFORMATION) CatalogDriver.runQuery() select ID , CLASSTYPE , NOTM , ISSEEDED , canreactivate , name , created , bilevel , LifeCycleState , description , description_clob , warningmessage , warningmessage_clob , status , type from TIP_Configuration_t t where ( LifeCycleState= ? )
    2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) CatalogDriver.setBindVariables():
    2009.09.08 at 23:44:03:094: B2BStarter thread: Repository - (DEBUG) Bind Variable : index = 2 value = Active
    2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) CatalogDriver manager == oracle.tip.model.metadata.CatalogMetaManager@8a0544
    2009.09.08 at 23:44:03:097: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, String) - constructor
    2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
    2009.09.08 at 23:44:03:098: B2BStarter thread: Repository - (DEBUG) LargeStringImpl(InternalObject, BLOB) - constructor
    2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) Object OID - FE5E6FB76BBF25DDE030578C9515137B-22-1-1
    2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) LargeStringImpl.setBlob() - extracting blob contents to stringBuffer
    2009.09.08 at 23:44:03:099: B2BStarter thread: Repository - (DEBUG) CatalogDriver.constructBaseObject()
    20
    Edited by: Praveen I on Sep 9, 2009 12:18 PM

    Hi Pravin,
    Check b2b_instancemesage view for related messages and make sure that payload is coming properly.
    Also make sure that you have atleast one configuration in deployed state. Also make sure that transportServlet is up and running by accessing below url -
    http://localhost:port/b2b/transportServlet
    Also try by using the enqueue stubs which comes as part of tutorial (Ora_Home/ip/tutorial)
    How are you enquing message to this queue? Please mail the b2b log in debug mode to my id (in my profile)/post the same here.
    Regards,
    Anuj

  • Messages not processed

    Hi all,
    I have a problem regarding messages. There are some text files in the FTP folder that are not being processed by XI. They are not converted to XML messages. Some are processed while some are not. Please advise. Thanks!

    Hi,
    >>>There are some text files in the FTP folder that are not being processed by XI.
    it can only mean 3 things:
    - the file apdater is not configured to pick them up
    - the file adpater is in error status - check communication channel monitor in RWB
    - the file adapter is processing too many messages and it cannot pick up anymore - check it in messagingsystem/monitor - number of used queues
    Regards,
    Michal Krawczyk

  • Messages not processed by integration server after SP09 to SP16

    Operating System: Windows NT 2003 Standard edition Service Pack 1
    Database: SQL_Server_8.00, DBSL:640.00 Patch Level: 100
    ABAP Kernel: Non Unicode; Release: 640; Patch: 109;
    XI: Version 3.0; Service Pack Stack:16
    Host: PEARL; IPAddress: 10.1.1.13
    We upgraded from service pack stack 09 to 16 and since then no messages
    are getting routed to integration server. We tried a cache access
    though TCODE: SXI_CACHE and it said "if_http_client receive
    http_communication_failure". Then we went to ICM monitoring through
    TCODE: SMICM and saw that the http service that runs on 8000 port is
    inactive when we tried to activate it gave an error. Here is the
    snapshot from the trace file.
    [Thr 3492] *** ERROR => NiIBind: service '8000' (8000) in use
    [nixxi_r.cpp 3845]
    [Thr 3492] *** ERROR => NiIListen: NiBind (rc=-4) [nixxi_r.cpp
    767]
    [Thr 3492] *** ERROR => IcmBindService: NiBuf2Listen failed for host
    PEARL:8000 (rc=-4): NIESERV_USED [icxxserv.c 1549]
    When we tried to access runtime workbench through integration builder
    webpage it says "page not found".
    When we tried to login to the J2EE visual admin using the default
    account(J2EE_admin) it gave the
    error "http://pearl:8101/msgserver/text/logon returned empty list of
    connection parameters."
    In SAPMMC we looked at the system log and saw the error "SAP Basis
    System: Operating system call gethostbyaddr failed (error no. 0 )".
    We tried restarting the whole server but to no effect.

    since your OS is Windows try following in command at prompt
    C:>netstat -a
    or
    C:>netstat -an
    one of the above will work in NT, the list shows the listening (Open) ports and ESTABLISHED (used)..check for the 8000 which is your HTTP port.
    Also in SAP check the t-code "SMICM" and then goto services and see the HTTP services running without error or not?
    Hint: Port names are defined in services file located at C:\WINDOWS\systemXX\drivers\etc\services  file..

  • Printer 1200n, printer message not in my booklet

    On the message bar, 4 yellow lights appear in bottom row, with icon 2nd from left lit on top row.
    Message appears that all inks have expired.  However the large ink menu I have that show percentages of how much ink is available, show the least amount to be 43 percent (black), the rest is more.  So I don't understand what this message really means, I know there is ink there.  two were recently put in. 

    ]my computer will frequently (once every other day) not automatticallly reconnect to my network after waking from sleep in the morning.
    The reason is probably due to the additional network and because you have said:
    ]I have all the security options enabled,
    MAC filtering and non-broadcast SSID can cause this kind of issue especially in a crowded area. There may also be a hidden wireless network broadcasting on your channel which will also cause similar issues.
    A wireless network is still broadcasting and therefore detectable regardless of whether you broadcast the SSID (closed network) or not.
    As for MAC address access control, if you are having problems connecting it is usually down to this and as MAC addresses are sent unecrypted can be read and spoofed and therefore do not add any security.
    Unfortunately "Closed" networks, MAC access control lists, and reduction in transmission power are all more "feel good" security rather than real security. All these various approaches are dated and mistakenly lead to overconfidence.
    As you have WPA enabled, I would disable MAC filtering and broadcast your SSID.
    WPA is virtually uncrackable and therefore you do not need to worry about hiding your network.

  • RFQ Message Error " Not Processed"

    HI
    If the message was processed successfully, the status is set to '1' and if an error occurs, the status is set to '2'. Status '0' usually means that the processing program has not yet been started (if the message is to be processed manually, for example).
    In my RFQ the processing status is "0" means " Not Processed"
    In the msg status a "traingle button" is thr instead of the "Green Button"
    So that we can not able take print out in ME9A also not able see print preview thro ME9A
    How to make this processsed...
    Vijay

    check if the RFQ contain release strategy and alrady released for output.
    you can check the print preivew in ME4N.

  • What do I do when I get the message my printer is not connected? HP Officejet Pro 8500A e-All-in-One

    What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One.  I have a macintosh computer using snow leopard.  I have used the printer for 6 months.  Nothing has changed.  I shut off the printer and turned it on.  The internet is working altough I will turn it off and on.  What do I do next?  Thank you.

    The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it.  If you don't have these you will find this on the HP web site.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Message that printer cannot be found in directory; my printer is not printing

    My HP Photosmart 5514e - all in one printer - will not print.  I have gotten a message that it is not found in the directory.  I have tried so many different things -- printer will be 3 years old at the end of the month.

    Hey there @pattysc , welcome to the forums
    I read your post about your Photosmart 5514 not printing from your Windows XP system, and I would like to help.
    I would like for you to start with running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Please send me the results in a screen shot, or through written text is alright too!
    Try printing from Notepad, and from a website, for example. Let me know if you can print from either place. It's always good to test print from more than one program as sometimes a program has a glitch and won't print.
    Also try making a copy from the front of the printer, and tell me if copies work.
    In the meantime, you can try a power reset, firmware update, and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Getting the Latest Firmware and Product Updates
    I look forward to hearing from you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Message error: "Saving a PDF file when printing is not supported. Instead, choose File Save."

    I have 2 problems creating a .ps file.
    As i know, there are 2 ways of creating a Postcript file from a PDF.
    The first is from the Print monitor. I go through menu File/Page Setup i give the exact dimensions from my spreaded pages and after that i go to Print and when this window opens,
    i go down and left and i open the pop-up menu on"PDF" and i choose "Save PDF as Postscript"
    There is where i get the above error message :
    "Saving a PDF file when printing is not supported. Instead, choose File > Save."
    And the second scenario, i get an equal problem.
    If i go to Page setup and give the right dimensions of my spreaded document, after that i go to the File/Save as command, there is choose from the bottom pop-up menu, the option at Format: Postscript
    If i do that i get the following message:
    "The document could not be saved. An internal error occured."
    What is wrong with all this?
    Can anyone help me out?
    System preferences.
    Mac OS X 10.4.11
    Acrobat professional 8.1.2
    Thank you

    Jon Bessant asked:
    "Does this occur on every PDF file? The internal error message that is ..."
    Yes, it happens on every PDF

  • Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

    I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6.  In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them.  Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them.  I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close.  Thoughts on how I can fix this bug?

    Hey Jeff--
    No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
    Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
    // app.activeDocument.ativeHistoryState = historyState;
    The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
    Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
    So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
    Hope this helps. May post more next week.

  • HT4623 I can not get connected to App Store , download or update any apps,  EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

    I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED ,  ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

    Try contacting the iTunes support staff, they do the app store also, at:  http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for