Print migo - output device

Hi everybody,
when posting a gr with a migo (NDR=X and 3-collective slip) a new spool request is created. The problem is that it should be printed inmediately and with output device X01. (in su3 it is configured this way and also in the condition record - nace with we03) but when I enter into the spool and double click a request it says that the output device is LP01, and it is not configured for my conection, so it does not print it.
I wanted to know why is it taking that output device and from where is it taken, because I have done the configuration with the other one.
Thanks in advance,
Rubé

Hi,
It seems that the system is still reading the default data for the output type M706. Please recheck the paramerets and maintain the condition records again , either in NACE or in MN22, thsi should help, also change the communication method and assign your printer.
Regards

Similar Messages

  • Printer problem  "Output Device LP01 is Locked by R/3"

    Hi BASIS Experts,
    user is printed
    Spoolrequest showing Status="-" , outputrequest is not generated,
    in SP01 listof spoolrequest
    selecting the Spool no(Check box)  and Clicking PrintDirectly
    it is showing message "Output Device LP01 is Locked by R/3"
    I checked Printer Q it is in Ready Stage, there is no changes to the printer from BASIS side.
    my Environment is AIX,DB2,R3
    I appreciate the Quick & helpful response.
    Thanks & Regards,
    Kishore Reddy

    Hi ,
    It will show ... running ...  but try to trace ... and check .. .
    it will show running ... but you need to check ..
    Does it reading writing to database ?
    Analyses the job...  what exactly it is trying to do ..
    .... I never seen the job running this much long time ....
    Regards
    Ben.

  • Attach specific printer to output device

    I have created an output device in SPAD tcode .Its name is  YSEA. Now i want to attach a specific printer to this output device. Like whenever  i use this output device and give a print command, the print should come on this specific printer only. Now how do i give this specific printer so that it fulfills this requirement.

    You add entries in table TNAD7.
    Go SM30 and V_TNAD7--Maintain.
    In program you need to select as follows
    selct single ldest into ...........

  • Output device not changing in Spool

    Dear Fellows,
    I am having problem in the printing of purchase contracts. Users want to keep the output proposed in contract creation in pending status and keep on using it through ME9K by trial  print out.
    Original output is proposed with output medium of printout OK. Now if I change it to output medium fax in ME9K and do a trial fax it does not work. SP01 shows the original printer as output device and not the fax machine.
    I am not sure where the problem is. Please help why output device is not changing when the output medium is changed ?
    Tkx
    IMJ

    Dear,
    When in NACE tcode, you must be selected Application EV, then select output types button. Then select the output type for Fax->then branch to detail , go to default value tab: then you''ll find transmission medium.You can select "fax" or "external send".
    If you're using external send, u need to maintain the "communication strategy"in
    IMG-Application serverbasis servicesmessage controlDetermine Comm.Strategy,then name it and maintain the comm,typethen select the comm.method=fax.
    Regards,
    w1n

  • Transport.of SAP script form , printer def and device type is not enaugh

    I transported the SAP script form , printer definition and device types of a thermal printer.
    On original system the printout is ok but on target system not. What should I do?

    Thank you for your fast answer
    As the matther of fact I am technical person. I think Output type belongs to application. However the difference is visible in  se71 ->Utilities->Printing test -> output device ->print preview.
    As I wrote I transpored corresponding. SAP script form , printer def and device type

  • Background job  step - Printer - Output device  table

    Hi,
    When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
    Thanks.

    Hi Raj check table TBTCP

  • Invoice List print out multiple output devices

    Gurus
    I have a requirement where in I need the Invoice list to generate output to 2 different devices.....
    Here is my dillema, Invoice list program looks at the output device that is set up in the user defaults in the user area, SU3 transaction, Since only one output device can be used in that field I can generate Invoice list output to only one printer unless done manually that is not possible as the number of invoice list is huge.
    I am using ECC 5.0 , Does anybody have a solution for this???
    Thanks
    In advance

    The printer name can be defaulted from the output condition record, which I believe trumps the printer in the user's default.
    You could have two output condition types Z001 and Z002, both automatically proposed and each pointing to a different printer.

  • SmartForms : Printing Non-English characters with SWIN output device?

    I have a Japanese Text (entered in Unicode at So10) and I want to print it from my SmartForms application using SWIN device type.
    I thought SWIN converted all the components into graphics before sending to printer. To my surprise, the Japanese text printed out as "########".
    I even tried duplicate the SWIN output device to another output device and changed the character set to 4103 UTF-16LE Unicode / ISO/IEC 10646 but then the print process hang.
    Anyone knows how to overcome the problem so that I can print Japanese with SWin output device?

    I have a Japanese Text (entered in Unicode at So10) and I want to print it from my SmartForms application using SWIN device type.
    I thought SWIN converted all the components into graphics before sending to printer. To my surprise, the Japanese text printed out as "########".
    I even tried duplicate the SWIN output device to another output device and changed the character set to 4103 UTF-16LE Unicode / ISO/IEC 10646 but then the print process hang.
    Anyone knows how to overcome the problem so that I can print Japanese with SWin output device?

  • Problem in creating output device for RICOH Aficio MP 2000 PCL 5e printer

    HI,
    i have problem in creating a output device for the RICOH Aficio MP 2000 PCL 5e as i am unable make out which device type should be assigned and what should be given in spool server tab.
    i have pinged the printer in lan and it is connecting.
    when i am giving the print from new ricoh printer its going to some other old printer in network.
    we are unable to get the logo of our company when we are taking print from this printer from sap level.
    kindly suggest what other things has to be taken care.
    regards
    anil

    Hi,
    shall i do in development and then import the same to quality and production.
    also tell me what shd i put in these tabs
    version-sapsripthandling-driver
    list handling-printer driver
    printer character set-character set-syt character set
    we can find this tab in create option of device type.
    when i am trying to save its showing it has to be done on program level.
    kindly reply back as it will resolve the big issue for me.
    thanks
    anil

  • Output Device prints 3 copies of each print out

    Hi Frnds,
    We are facing a problem with the output device.
    When we try to print anything from SAP to an out put device, it gives us 3 copies of same printout.
    We tried with smartforms, sap scripts and even a normal print request from the anywhere in SAP. For the particular output device it gives 3 printouts.
    That output device is configured to a particular printer here in the user location.
    We have also tried couple of other things,
    Made that particulrt printer as the default one in our operating system (Windows) and printed using LOCL output device. It printed only one copy.
    Made other printer as the default in Windows and then print using LOCL output device, now again it printed only one copy, to another printer.
    Since it prints 3 copies of the same thing from anywhere in SAP with this op device, We think that there is no problem in Print programs or in Output condition configurations.
    The spool that gets generated out of this request says "No. of copies" 1.
    Not really sure where its going wrong. We think the problem is somewhere in Basis settings.
    If any one has faced this kind of issue can u please let me know how we can rectify this?
    Regards,
    Karthick C

    Hello,
    Are you using Access Method G for the output?
    If so you can check if the following setting was set:
    set use_copies = N (where N = number of copies) in
    HKEY_CURRENT_USER\Software\SAP\SAPlpd\SAPLPD
    Check the SAP note: 1149136 also.
    Regards,
    David

  • Output Device problem ,Printer problem

    Dear Friends,
    I have problem with the printer,
    We have given Output device( Printer ) in User profile i.e su01, while executing the transaction ideally system should pick this printer if the same user is giving the print, But in our case user trying to give KSB1 report line items, in this transction system is picking up different printer.
    Let me know in this regard
    Thanks in Advnce,
    Anand Y

    Hi Anand,
    Try to maintain the printer in SU3 tcode. It will come same printer while taking he KSB1 printout also just now i tested it is coming properly.

  • Output device - printing in unix file - where do I define the UNIX path?

    Hi,
    We use an special Output Device to print spool requests directly in Unix. These Output Devices are defined as Local Unix File. When those spool requests are printed, a file is created in certain path in UNIX.
    The question is where this link is defined?, I dont see where in the Output Device (trn SPAD) is defined the path in UNIX.
    Thanks!
    Aaron

    Hi,
    Might be the unix path would have been defined in the SPAD only under the Access method of the output device, in the field Destination host.
    Regards,
    Aditya

  • Cannot find PDL type for output device '(Printer name)'

    Hi,
    After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
    Cannot find PDL type for output device '(Printer name)'
    Message no. FPRUNX113
    Diagnosis
    No PDL type has been found for the specified output device.
    System Response
    Error message
    Procedure
    Contact your system administrator.
    Procedure for System Administration
    For more information, see SAP Note 685571.
    Any input will be off great help...
    Regards
    Pooja

    Hello
    It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
    If you need the output as a sapscript then please do the sollowing steps:
    (1) Execute transaction SM30
    (2) Enter 'Table/View' as V_T5F99OCFT
    (3) Select 'Maintain' option.
    (4) Select 'New Entries' option from the Application Too
    (5) Enter following entries:
         Logical Form Name    = HR_IN_EPF12A_99M
         Form Variant         = (Leave this field blank)
         End Date             = 31.12.9999
         Start Date           = 01.01.1990
         Form Type            = SAP Script (SSC)
         Def. Type            = (This field should be checke
         PDF Form Name        = HR_IN_EPF12A_99M
         SAP Script Form Name = HR_IN_EPF12A_99M
         Smart Form Name      = (Leave this field blank)
    (6) Save the entries
    The above example I have given you is only for the form 12A.
    You have to make entries for all the reports sapscript in this table.
    Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
    all the sapscripts you require.
    Regards
    Ramana

  • Printing error with t-code j1inmis: Can not find PDL type for output device

    Hi,
    When using tr.code j1inmis,when we seeing the print preview iam getting below error.
    The error with my system show the details as follow :
    Cannot find PDL type for output device LP01.
    My system is only abap stack.Guide me for the same how to resolve this.
    Thanku

    Hi,
       When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
    When I check The Test : FP_TEST_00 iam getting below error
    ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
    But
    When I check The Test : FP_PDF_TEST_00 its working fine.
    And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
    When i check with destination iam getting error :  SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
    Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
    Thanku

  • Regarding callfunction for output device without a prompt for printer name.

    Hi,
      Is there any call function, for accessing output device, without a prompt for printer name? Can we directly execute the smart form without print popup?
    Can anyone suggest me in this regard.
    Thanks in advance,
    Shwetha Korlepara.

    Hi,
    Check my code and reward points by clicking the star on the left of reply,if it helps.
    *& Report  ZZZ_JAYTEST1                                                *
    REPORT  zzz_jaytest1 NO STANDARD PAGE HEADING MESSAGE-ID zhrt.
    Variable Declaration
    DATA : v_form_name TYPE rs38l_fnam,
           itab TYPE STANDARD TABLE OF pa0001,
           w_ctrlop TYPE ssfctrlop,
          w_compop TYPE ssfcompop,
          w_return TYPE ssfcrescl.
    SELECT * FROM pa0001 INTO TABLE itab UP TO 5 ROWS.
    SORT itab BY pernr.
    DELETE ADJACENT DUPLICATES FROM itab COMPARING pernr.
    DATA: control TYPE ssfctrlop,
    control_parameters TYPE ssfctrlop,
    output_options type SSFCOMPOP.
    control-preview = 'X'.
    control-no_open = 'X'.
    control-no_close = 'X'.
    control-no_dialog = 'X'.
    control-device = 'PRINTER'.
    output_options-tddest = 'LOCL'.
    OUTPUT_OPTIONS-TDNOPRINT = 'X'.
    OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
    CALL FUNCTION 'SSF_OPEN'
    EXPORTING
       USER_SETTINGS            = ' '
       OUTPUT_OPTIONS           = output_options
       CONTROL_PARAMETERS       = control
    EXCEPTIONS
       FORMATTING_ERROR         = 1
       INTERNAL_ERROR           = 2
       SEND_ERROR               = 3
       USER_CANCELED            = 4
       OTHERS                   = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    output_options-tddest = 'LOCL'.
    OUTPUT_OPTIONS-TDNOPRINT = 'X'.
    OUTPUT_OPTIONS-BCS_LANGU = SY-LANGU.
    CALL FUNCTION '/1BCDWB/SF00000066'
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
       CONTROL_PARAMETERS         = control
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
       OUTPUT_OPTIONS             = output_options
       USER_SETTINGS              = ' '
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            = w_return
      JOB_OUTPUT_OPTIONS         =
      TABLES
        itab                       = itab
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'SSF_CLOSE'.

Maybe you are looking for