Print on cardstock HP deskjet F4400

wanting to print on cardstock, adjusted paper to matte cardstock setting, cardstock rolls through printer
but doesn't print on it.

Hi,
How do you connect your printer now ? Based on the following information, it only has USB connection:
    http://www.hp.com/hpinfo/newsroom/press_kits/2009/ecosolutions/reduceimpact/HPDeskjetF4400Factsheet....
Support/Connectivity
o
High Speed USB 2.0
No driver for Chromebook for USB connection. Please try:
    http://www.cnet.com/au/how-to/how-to-print-from-a-chromebook/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to print on my HP Deskjet F4400 to my Chromebook

    How to print from my HP Deskjet F4400 to Chromebook

    Hi,
    How do you connect your printer now ? Based on the following information, it only has USB connection:
        http://www.hp.com/hpinfo/newsroom/press_kits/2009/ecosolutions/reduceimpact/HPDeskjetF4400Factsheet....
    Support/Connectivity
    o
    High Speed USB 2.0
    No driver for Chromebook for USB connection. Please try:
        http://www.cnet.com/au/how-to/how-to-print-from-a-chromebook/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Trouble printing with my HP Deskjet printer using CUPS and hplip

    tl;dr This 1,646 word post describes my frustration with CUPS and hplip. I cannot get my HP Deskjet F4400 set up with CUPS, and all the solutions I've tried don't work.
    I'm running Arch Linux ARM on my Seagate DockStar, a small ARM-based "plug computer" that I use as a home server. My printer is the HP Deskjet F4480, which is part of the HP Deskjet F4400 series.
    I previously had CUPS set up to share my printer with my home network, using hplip for the printer driver. I never upgraded CUPS or hplip because those versions worked fine, and I didn't want to break anything avoid breaking anything. The versions that I was using had to have been at least one to two years old.
    Everything was working very smoothly... until a few days ago. The drive I was running Arch Linux ARM on became corrupt, so I had to install a fresh copy of the operating system. That meant losing all of the working versions and configuration files each application I had installed, including CUPS. I thought I had a backup image of the drive, but it didn't work when I tried to restore it. (Yes, it was stupid of me not to test my backup.)
    Setting up CUPS was one of the first things that I wanted to do after reinstalling, since my family depends on the network printing functionality almost daily. Unfortunately, I could not get CUPS to work with my printer correctly. It wouldn't be able to display a list of drivers, HP's setup utility encountered an error adding it, and it threw various errors when I tried to print test pages. I ended up reading hundreds of forum posts, wiki articles, and CUPS/hplip tutorials to try to figure out how to properly set it up. I ended up spending a total of nearly ten hours trying to get the printer to print with CUPS, and it's still not working after all that work.
    I'm going to explain in this post some of the many things that I've tried so far. I just removed all of the printing packages from my system and any extra files that were left behind. I'm now going to be installing all of the packages again and documenting everything that I have been trying to do to get it to work. I'll try to include exact error messages and logs where necessary.
    1. I first found this article on the Arch Linux ARM website on how to set up a CUPS printer. I didn't really want to use webmin, but I did it anyway so that I could follow the guide. I installed all the packages mentioned except for cups-pdf, since I didn't need print to PDF support. Everything installed smoothly, and I configured CUPS and webmin to allow access to other computers on the network. I started to notice problems in the instructions - /etc/rc.d/cups was actually /etc/rc.d/cupsd, /etc/printers.conf was actually /etc/cups/printers.conf, and webmin didn't actually add anything to the printers.conf file. I uninstalled webmin at this point because I didn't need it, and I decided I wasn't going to follow that guide with incorrect information.
    2. I then tried to set up the printer on my own using the CUPS web interface listening on port 631. I clicked the Add Printer button and it switched me to the HTTPS web interface. I then logged into the root account and was presented with the list of printers. My printer was listed as "HP Deskjet F4400 series (HP Deskjet F4400 series)", so I selected it and continued. I saw a list of printer models (PPD files) ending in CUPS+Gutenprint v5.2.9. There was no entry for my printer, so I tried the "HP DeskJet Series (en)" one. I set the default options and chose Maintenaince->Print test page. I then got a ridiculously simple error: "Unable to print test page: No such file or directory". How do I even know what file or directory it's referencing? I read online that it may be because I'm not in the lp group, but root is indeed in there. I saw in the error log "Avahi client failed: -26". I started dbus and avahi-daemon just in case, but I still got that silly error. I restarted cups and the same error message occured.
    3. I researched online that pretty much the only way for my printer to have a driver would be to install hplip. Before installing hplip, I uninstalled CUPS, leaving cupsd.conf but deleting printers.conf. Then I installed CUPS and hplip together, with hplip requiring foomatic-db, foomatic-db-engine, and foomatic-filters. Everything seemed to install correctly. I started CUPS again and then ran hp-setup -i to try to install my printer. I selected USB and it found my printer, hp:/usb/Deskjet_F4400_series?serial=[printer serial number here]. I entered a simple name and then was told that no PPD file was found for the printer but that I could specify one manually. There were none I could find online; everywhere it just said to install hplip. I used the find command to find "f4400" and finally found 2 compressed PPDs located at /usr/share/ppd/HP/hp-deskjet_f4400_series-hpijs.ppd.gz and /usr/share/ppd/HP/hp-deskjet_f4400_series.ppd.gz. I gunzipped both of them and pointed hpsetup to the hpijs one, knowing that I was using the hpijs one when it was working before. It told me "Description for the file: HP Deskjet f4400 Series hpijs, 3.12.6". Hooray! I selected to use it, but then setup failed: "error: Printer queue setup failed. Please restart CUPS and try again." Ugh!
    4. I restarted CUPS and went into the hp-setup process again. It gave me the same printer queue setup failed error. I don't know if these entries in the CUPS error log are related or not, but these errors relating to foomatic showed up. I restarted CUPS again and this time used the non-hpijs file with hp-setup. This one was called "Description for the file: HP Deskjet f4400 Series, hpcups 3.12.6". It failed again with the same error and the same entries in the error log. I found lots of posts online about this error, but none seemed to have a solution that would work for me. Now I tried running hp-setup in debug mode with -g. Here is what it said before the error. I then tried to Google "debug: addPrinter() returned (0, Unable to connect to CUPS server)". I saw on an Arch bug report to install dbus-python and python2-gobject, as well as create a symlink for /usr/bin/python2 to /usr/bin/python. It didn't work - same error.
    5. I then tried to add the printer to CUPS via its web interface. Now there were two listed,  HP Deskjet F4400 series (HP Deskjet F4400 series) and HP Deskjet F4400 series USB [printer serial number here] HPLIP (HP Deskjet F4400 series). So, hplip added the second one. I tried both of them, but after clicking Continue the page started to hang. I got another stupid, undescriptive error. "Unable to get list of printer drivers: Success". I saw the same foomatic errors in the error log as before. I then started reading the ArchWiki page on CUPS, located here. I tried the blacklisting usblp. I tried changing the permissions on the device node, although this starts to become ridiculous that it is even required to do that. Nothing was working; the printer installation still didn't work with hp-setup or with CUPS. Then, I found what I was looking for: the exact error I had on the wiki page! It said for "Unable to get list of printer drivers" you should "Try to remove Foomatic drivers." WTF? Foomatic is required for hplip, and hplip is required for my printer. I can't do that. Forum posts say to try that or do the permissions or usblp thing. Nothing is working.
    6. I tried various other things to get it to work, even though I knew they probably wouldn't make it any different. I copied the PPDs from hplip to another folder and uninstalled hplip and foomatic. I then added them to /usr/share/cups/model and CUPS successfully found them and set up the printer. I reinstalled hplip and foomatic since they're needed for those PPDs to function, and I tried printing a test page. It failed. I tried using the CUPS web interface to modify the printer driver; nope, that wasn't going to happen: "Unable to get list of printer drivers: Success".
    That concludes the list of some of the things that I have tried so far. I really want to get this printer working, but right now I am really fed up with CUPS and hplip. It's things like this that make me hesitant to recommend Linux to anyone else. So much manual configuration and tinkering the inner workings of things is required to do tasks that would be quite simple on Windows. For example, I can plug this printer into my Windows 7 machine right now, wait for the driver to automatically be installed and configured, and have a test page in my hands less than a minute after I first plugged in the USB cable. I can share the printer with any other Windows machine on the network by checking a single checkbox.
    But back to my problem with getting the printer to work on my DockStar. I just uninstalled all of CUPS, hplip, and foomatic again and removed all of their files. I can walk through things to try that you guys post and then give you full logs of everything - just give me exactly what to do and install and the exact order to do it all in. I just don't know what to do at this point and am so frustrated with this that I'm about to give up.
    Does anyone have any suggestions on how to get this printer working? I know this was a very long post, but I just wanted to explain everything that I've tried and how nothing worked. I really hope that we can figure this out so that I'll be able to print, and maybe it'll solve a few other people's problems with their printers, too. Thanks for reading, and thanks in advance for the help.

    Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
    make sure these packages are installed or install them
    pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
    pacman -S system-config-printer-gnome
    rc.d cups start
    To add device and install hp driver:
    1. Run ‘hp-setup’ as root.
    2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
    3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
    run system-config-printer as root, to add printer
    # system-config-printer
    click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
    you should be ok from here, if not some further steps:
    If you encounter the following error:
    File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
    debugprint (host + “: ” + args)
    TypeError: cannot concatenate ‘str’ and ‘list’ objects
    You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
    4). Finally, you can run hp-check to see what problems exists for the printer.

  • HP Deskjet f4400

    Hello all,
    I purchased an HP Deskjet f4400 a while ago and have not been able to print with it, not even an alignment page. I got a test page to work, but nothing else. The printer status reads as "unknown" in HP Utility.
    I have disconnected and restarted both computer and printer several times; I have also added and deleted the printer and reinstalled the printer's software several times--using the latest driver from HP. Nevertheless, nothing seems to work. Any advice would be appreciated.

    Hi jwcrabtree71yah,
    If the printer is turned on but the operating system is stating it is offline, go to the control panel and find printers. Right click the icon of your printer and choose the option "use printer online". If this doesn't work can you tell me what operating system you are using and how you are connected to the printer?
    Many Thanks,
    Francheska
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How to get bonjour to work on a wag120n router so ipad can print wireless to hp deskjet 3070A

    Does anyone know of a fax to to get bonjour to work on a wag120n router so my ipad can see and print wireless to hp deskjet 3070A.  I can reach the home page of the HP printer from the ipad using safari but the printer doesn't come up as an airprinter option.   I have a PC laptop (not apple) and it can print wireless to the HP 3070A.
    I have logged on to the wag120n and it has firmware V1.00.16  
    I can't see any multcast options within the admin setup.
    Any clues ?  thanks for your time.

    I have looked for multicast options/filter within the admin function on the router but can NOT see any.  I have contacted CISCO directly and they have confirmed that this router will NOT do it, and they have no intention on bringing out a fix.  If someone has got it to work, let me know.  thanks for your time.  Andrew

  • Printing Problems with HP DeskJet

    Hello,
    I'm having problems printing to my HP DeskJet 882C. Supposedly, it is supported by the new HP Intel drivers but every time I go to print, the text comes out oddly stretched, overlapping, or cut in half. Sometimes, particularly when printing from Final Draft, the printer just stalls (at Opening Printer Connection).
    I've tried reinstalling the HP drivers from the original Install DVD (for the MacBook Pro)...no love so far.

    I have a DeskJet 840C bought late 2001, that I was using with a Toshiba Satellite laptop running under Windows XP Home Edition.
    I bought recently a Mac Mini 1,66 GHz Intel Core Duo, and I connected the HP840C to it with USB; I have no network.
    When I try to print either a Word document or a web page, I get funny print outs, sometimes not readable at all, sometimes only few lines on a page then it goes to next page, sometimes font are stretched vertically.
    I downladed an up-todate driver from HP site, and now my printer runs the Mac with Gimm-Print v 5,0,0 beta 2.
    But still no improvement.
    Who can help me?
    Thank you
    Mac Mini 1,66 GHz Intel Core Duo   Mac OS X (10.4.5)  

  • How can i get my ipad to print to my HP deskjet f4580

    How can i get my ipad to print to a HP deskjet F4580

    Hi there, probably the easiest way is to install the HP ePrint mobile print app on the iPad. Take a look at the information here to find out more about how this solution works and to find a download link to the App store in iTunes http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?ap...
    Feel free to post back if you're having any problems. All the best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Wont print on cardstock

    i can not get this printer to print on cardstock.what am i doing wrong.regular paper yes,cardstock no.please help????

    Hi,
    Please check the thickness (called weight) of those cards.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Printing on cardstock paper using c4150 all in one

    I don't know if my printer will print on cardstock paper. Does anybody know?      Thanks

    Hi there mamapj,
    This article has the paper specifiactions for your printer. Check the intended card stock against those shown here for compatibility.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printing on cardstock

    I have the Photosmart C6280 All-In-One and it doesn't like printing on cardstock - jams.  Any tricks I should know, or am I just out of luck.  HELP

    I have the same problem with my HP psc 1300 all-in-one.  In fact, I can't get it to print reliably on anything but plain inkjet bond paper.  All the other paper options listed in the print window are useless -- photo, cardstock, whatever.  I've been trying all day to print on Avery 8387 postcard stock.  It prints the first two lines, then claims there is a jam, and ejects the paper.  I see by the date on your query, and the date on some of the other queries, that many of these questions go unanswered for days, months, and even years.  It would be nice if HP would occasionally read through these posts and contact their customers with some suggestions!  I'm about ready to throw this printer in the trash and buy and Epson -- or something that really will do what it says it will do!

  • CS3 Photoshop Printing to a HP DeskJet 5500 PS issue

    I have a user that is trying to print to a HP Deskjet 5500PS and every time that he tries to print from with in Photoshop he gets a error on the printer that does not allow the image to print. Has anyone ran into this? I have tried to replace the printer driver for on the machine. I have tried everything that would be first thought. I've ran out of ideas help me please.

    I think it's a Leopard issue with third party developers unwilling to commit resources to resolve problems. I had the bounding box problem with an older HP basic laser printer. I was never able to print to the laser printer from the Mac using CS2. That problem disappeared when I got a new laser printer, a basic laserjet 1505. However, I now have glitches printing from Microsoft Office 2004. In order to print I have to go to print preview and print from there.
    The issue probably boils down to the number of programmers assigned to the Mac platform. Too few programmers, too many glitches slip through the cracks. One of the costs of being a Mac user. I bought Microsoft Office 2004 just before Christmas and also find the "borders" command to be flaky. It gives me boxes no matter how I set the default. Since I am a home user I will probably cough up the extra near $200.00 and go for Office 2008. I simply work with too many others who are using Office to switch suites, e.g. IWorks.

  • Printer for cardstock?

    Can anyone recommend a printer for thick cardstock? I am planning to make custom bicycle playing cards and I want to print directly onto the card. 
    what I am looking for:
    a printer that loads paper from the top, front or rear doesn't matter as long as it has a straight path and doesn't bend the paper.
    inkjet 
    prints to cardstock 
    under $200 if possible
    ink that isn't expensive to replace
    Thanks for any help!!

    Anyone ???

  • Printing on an HP Deskjet 940c

    I recently set up a file sharing network between our home PC, my sister's PC, and my Dad's PC laptop, all which run Windows XP with service pack 2. We have an HP Deskjet 940c printer plugged into the "main" home computer via USB. When the home computer is up and running all the PCs are able to join the network, share files, etc. and wirelessly print, it's great. However, my mom and I have a bit of a problem trying to print. We both use macs, my mom has a new MacBook, and I have a MacBook Pro, and we would like to be able to join our FREYHOME network like the PCs and then print to the HP Deskjet 940c printer. How can I go about doing this? As always, any insight is greatly appreciated.
    Thanks,
    Nate

    Well for a start you want to make sure you have the drivers installed. HP is OK about having the right drivers, but just in case you should get Gutenprint. It's a set of open source printer drivers and whenever a company doesn't have it supported, these guys do. And even when the company does, this driver is usually works better. I have it installed on mine, never fails. Also, yours is listed.
    Second, you must connect to it over the network.
    (1) Connect to your network the way you normally would, be it via wi-fi or ethernet, then open up Printer Setup Utility (/Applications/Utilities/Printer Setup Utility.app).
    (2) Once in the program click the icon in the menu with a "+" that is labeled Add. This will bring up the printer adding dialogue. It will do a bit of a search, if your printer doesn't come up there, click "More Printers" in the bottom right of the window.
    (3) This brings in a pane and you need to choose "Windows Printing" in the top drop-down list and "Network Neighborhood" in the lower drop-down list. In the text area you should see a series of names, or only one, it depends on how many networks you're connected to. If it's only one, you know which to select. If it's more than one, select the one the computer with the printer is on. Double-click the network to view the list of connected computers.
    (4) From the list of connected computers select the one that you know the printer to be connected to. You'll probably be asked a name and password, just type it in.
    (5) This time the list will change again to a list of the printer or printers connected to the machine. Click the one you want to connect, but don't click add just yet.
    (6) Once the printer is selected, choose the brand of printer from the drop-down list labelled "Printer Model" then select the specific model of printer from the generated list. Now, you can click Add.
    Now back in Print Setup Utility you'll see the new printer listed with all the others you have added, if you have any at all. Now just go and print as you see fit.

  • Unable to Print on CardStock. I am using the HP 8600 Premium AIO

    Printer : HP 8600 Premium AIO
    I have bought the printer yesterday and I have changed the printer setting to use Card Stock. Still it does not print.
    Please help.
    Thank you,
    Best regards,
    Soumitra

    Travis,
    I have tried the solutions below from the link
    Solution one: Restart the All-in-One
    - I have done this a couple of times. Regular paper prints fine.
    Solution two: Check the condition of the paper, and then reload it
    - Just purchased the paper with the printer. I have tried to loosen them, sometimes it helps.
    Solution three: Clean the paper rollers
    - Brand new printer, it has barely printed 25 sheets. Also regular paper prints like a breeze.
    Solution four: Reset the All-in-One
     - Tried this, regular paper prints. Cardstock is still not printing
    Solution five: Adjust the paper settings in the print driver
    - I have done this. It was mentioned in one of the posts that the rollers need to adjust to pick up thicker paper.
    ( I wish I could attach the images, but not able to get the popup to add the images)
    Solution six: Service the All-in-One
    - Trying to avoid this for now.
    Thank you,
    Best regards,
    Soumitra

  • Advice on printing to cardstock

    I have a new CM1312nfi MFP and am trying to print some invitations on cardstock 5"x8" sheets.
    I have loaded the sheets in the tray similar to how envelopes are loaded.
    After each page, the printer goes through a cleaning  cycle for several minutes.
    Also, an error "Unexpected page size detected. Click OK to continue" comes up.
    This is frustrating, and so is HP's tech support -- any tips on how to print to cardstock?
    Thanks!

    I think you would know how to retrieve content of an HTML page using the URL object. Just in case.
    My apology if this short note doesn't help you at all.

Maybe you are looking for