Print on dvd using Canon mx922

I am trying to print on dvd using Canon mx922. Canon software (image garden and photprint ex) do not recognize printer using iMac running 10.7 and macbook air running 10.8. Canon has no solution and referred me to Apple. Anyone have a workaround? Any other software to try?
Thanks.

When you select to add the printer and you see the little pop-up window under the plus button with a heading of Nearby Printers, don't select the MX. Instead, click on Add Printer or Scanner. Then with the Default Add printer window displayed, you should see the MX. It will show something like Bonjour Multifunction in the Kind column. Don't select this one. Instead wait several more seconds and you should see a second MX appear, this one showing Canon IJ Network in the Kind column. Select this and the Mac will state that it needs to get the supporting driver from Apple. Agree to this and after the driver has downloaded, you will have your alternate driver installed and ready to use.

Similar Messages

How to set up Yosemite 10.10.1 to print and scan using CANON PIXMA MP780 (on MacBook Pro). Thanks. Bozdogan

How to set up Yosemite 10.10.1 to print and scan using CANON PIXMA MP780 on MacBook Pro (Pre-Yosemite operating system OS X10.6.8)?
Yosemite 10.10.1 doesn't seem to support MP780. Also, CANON doesn't have a driver for Yosemite 10.10.1 for its MP 780 series.
Thanks. Bozdogan (at [email protected])

I believe you should be able to print wirelessly using your MBP and printer. However, you will want to visit the Canon home site and download the current drivers and firmware for your printer. Once you've done this, I hope you'll post back with your results.
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780#DriversAndSoftware
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp780?pageKeyCode=prdAdvDetail&docId=0901e0248039b1dc
You're going to need both drivers and firmware.

Problem printing on dvd with canon pixma ip 4200 printer

hello, i just bought a ip 4200. now here is the problem: the cd-printing just won´t work at all. the regular paperprinting does alright. has anyone similar experience or a solution to offer? i would be highly grateful,
saluti from germany
eddie wagner

Ive just purchased a Pixma 5000 primarily for its direct CD printing, and was understandably surprised when Canon informed me that the CD printing software shipping with the printer still hasnt been updated for Tiger.
Short of sending the printer back, I purchased Disclabel software from Smileonmymac. It works very well, and is significantly better than the bundled application, working in a very iApp sort of way. (This isnt an advert, by the way, I just though it might put some people out of their misery)

How do I install Canon MX922 Fax function, printer works but fax not recognized??

I can print wirelessly using my new Canon MX922 Multifunction printer/scanner/fax. My iMac doesn't seem to recognize the fax function. I would like to be able to send documents straight to the fax without printing them first. Can anyone help?

If your printer supports it, you could try to fax using the printer's control screen (it has to be connected to a landline for this to work). I can fax directly from my Epson using the LCD touch screen and inserting the paper into the sheet feeder.

Printer pixma canon mx922

how can i install my printer canon mx922 on my mac without my cd i lost it and i already went to the canon website and download the software but it still doesnt work ...HELP PLEASE

Hi!
To ensure the most accurate information is provided, we will need to know the version of Mac in use (Ex. 10.7, 10.8, 10.9), as well as how you are connecting the printer (USB or wireless). Also, are you getting any specific error messages?
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

HT201465 update broke Canon MX922 printer

Hi,
I have a Canon MX922 printer (using the Canon MX920 series driver) that I've been using for three months over WiFi. The latest software update HT201465 broke my printer. I've tried resetting the printing system, deleting/adding the printer but nothing works.
Printing over my iPhone (AirPrint) still works, but my Mac can't use the printer for scanning or printing. It does show up as a bonjour printer and I can re-add it without issues, but printing or communicating with the printer doesn't work.
Anybody else with the same problem?
Seems like Apple dropped the ball on this update.
Thanks,
Sebastian

Sebastian-S wrote:
I can't ping or access the printer's webinterface either from my iMac or MacBook - that part makes even less sense to me. There's no access control in place.
If you cannot ping the MX or connect to its internal web page then it explains why you cannot print. What seems odd is that the device appears in the Default view of the Add printer window, as shown by your screen grab. If the restart mentioned above does not help, then confirm that the Mac is set to use the same IPv4 subnet as the MX.
If you leave the Default view of the Add printer window open, do you see another MX922 entry appear with Canon IJ Network, as shown below? This protocol is provided by the installed Canon driver, while Bonjour is part of the Apple system. Since you cannot ping the MX I would expect you don't but just want to check.

My Canon MX922 will not print wireless or wired.

My CANON MX922 printer will not print wireless or wired. I used suggestions in Community such as "MX922 not connecting wirelessly, 7-6-15, post 1362, 10-17-15". (No solution). I worked with a great rep., by phone,for one hour. (No solution). My MG6220 has worked wirelessly, for two years, on the same Lenovo computer with Windows 7. THANKING YOU FOR TAKING THE TIME TO HELP ME.

I tried that and the computer still can not recognize the printer. I used the CD that came with it to reinstall it and all goes well until the very end when the last window pops up and says it can not find the printer.I went and bought a new printer last night Canon MG5622 since it uses the same ink cartridges and I have a lot of of inkI didn't want to waste. This printer installed easily and works great.Not sure what happened with the other one but perhaps I'll pass it to my sister with the CD and see if it will install onher computer.thank you for your help, you're awesome for trying!Diane

Canon iP4000R - printing CDs & DVDs

Hi
Since upgrading to 10.6, I've been unable to print discs wirelessly using my Canon Pixma iP4000R.
After upgrading the drivers "Canon Printer Software Update 2.3", I can print wirelessly to A4 paper, but the DVDs printing just drags the DVD in, takes 5 mins to pretend to print and spits it out blank.
Using driver Canon iP4000R. I've used the Gutenprint version also with no luck.
Anyone else found how to fix this?
Ali

Hi there.
I have a Canon iP5200R and I can still print from Canon's CD LabelPrint application onto CD's via wireless. This was with the previous v10.26 driver and now with the v10.30 driver.
As a test, if you were to connect the printer directly to the Mac via USB, does the same issue exist with DVD printing? Just trying to work out if it could be a driver issue or a communication issue. Also, can you reply with what software and version you are using to print on the CD's.
Pahu

I am using Aperture 3 to edit RAW and JPEG photo images on my Macbook. I am having color printing issues with my Canon MP640 Pixma color printer. The image I see on my macbook is not reciprocated in printing from my printer?

My issue is that I am not getting print quality compared to the image I see on my screen. Just recently it has been very wishie washie. My printer is supposed to be excellent for producing color prints
I have contacted Canon support but they told me that the signals that are sent to the printer originate from an Apple product, therefore, it is an Apple mac problem not there's. I am wondering if my on screen proofing and/or printing profiles are correctly set. I notice that in 'print profiles' there are nine different options for printing from my particular printer. How confusing is that?
I have also found that when I choose a high standard print option my photo print comes out very red.
Can some kind person please help me? I don't seem to be getting any help from anyone else! Thanks in anticipation.

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Can't use Canon iR C4580i to print after upgrading to Mavericks

Can anyone help to solve the problem?
I have tried to download the driver version 10.2.0 but still cannot use canon iR C4580i to print.
Thanks

Hey WKWF,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides relevant troubleshooting information for your issue:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year.

Hi nicolej31,
You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer. With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist. Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from. For information on which paper sizes and types to load in each cassette tray, please click here.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?

How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...

hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect

Printing from my macbook laptop to canon mx922 printer

I am trying to connect my MacBook laptop to print to a Canon MX922 printer.
I can connect via USB (and it prints successfully), and I can even send a wireless 'test print' page, however I want to print wirelessly.
I am connected to the wireless router (airport) and I am successfully able to print from an iPhone and iPads without difficulty.
However, this is proving to be very difficult.
Attached picture is the code I am getting when trying to print.
When I click Print, I can see the printer, then I select it, and then it does not let the "Print" button get dark to be selected.
If I click return the attached picture is what I get.
Help!?!?

Hi Pahu,
All connected..thank you for your time in trying to assist.
Have a great day!
Angie

Using canon easy print.

I am using Canon Easy Print to write on my photos, I can only access my Documents that were transfered from my PC to my imac, is there a way that I can access my iPhoto , with easy print I can put writing anywhere on my photos, seems iPhoto is very limited.

The reason why you have no access to iPhoto through Canon Easy Print is that you can see a library NOT a real folder containing image files; in order to use Canon gorgeous app temporary place into the IMAGE folder the shoots you desire to print, simple. I do every time with great results. As an alternative to this procedure you can directly print with iPhoto. Depends on you.
Regards

Print on dvd using Canon mx922

Similar Messages

Maybe you are looking for