Print on Epson printer font 17 cpi

Hi,
i have problems with printing report 6i on the printer epson dfx 8000. I want to print 210 chars in one line. Does somebody know how to do that ? (Edit .prt file ???). My OS is WinXp, which driver should i use, Generic or Epson ?

Hi,
i am having problem with reports printing in dotmatrix printer, i already tried with char mode and prt file dflt. but no use, pl send me the example report file and example prt file to this mail id [email protected]
Thanks and regards,
M.Srinivas.

Similar Messages

Error message or program crashing when printing on Epson printer

In July 2008, I upgraded my computer from a MacBook to a MacBook Pro (and bought a Time Machine so that all my files are backed up regularly!) I then bought my wife a MacBook Pro in November 2008. We both used to have iBook G4s.
We have an Epson EPL-6200 Laser Printer that we print from using our Airport Express. It used to work fine printing documents from any program and printing wirelessly from the iBook G4 computers we had when we bought the printer around three years ago.
But since I have switched to a MacBook and now a MacBook Pro, I have all kinds of problems printing on the Epson EPL-6200 printer. At first, my MacBook did not print remotely at all. I had long conversations with both Apple and Epson, knowing there was a problem with the Epson driver. To top it off, the problems seemed worst with Microsoft Office, so both of them also said it was Microsoft's fault!
Now that Epson has upgraded its drivers and I have dowloaded the latest one, and switched to a MacBook Pro, I can print some files easily -- Word documents now print immediately, although I get an error message saying that the printer is not connected. But trying to print from other programs such as Firefox either takes a very long time (around 5-8 minutes for one page) or causes the program to crash.
Any ideas? The strange thing is that my wife's computer and mine are exactly the same (running Mac OS X version 10.5.6) but behave slightly differently when printing. I can print from Firefox, albeit after a long time per page, whereas if she tries to print from her computer in that program it instantly crashes.
I guess we still have driver issues with the Epson EPL-6200.
But I have looked on the Apple support forums and there seem to be a lot of printer-related issues like this. Do you guys have any suggestions? Or is there a printer that will work well with our MacBook Pros, an Airport Express and/or Time Machine (we have both) and when printing remotely?
All the best,
Alex

hey,
well, i use the below machines with the current mac os (10.5.6).
i (kind of often) had issues with the network printer epson epl-6200.
of which every issue could be resolved by myself, more or less quickly.
i.e. until the last update (10.5.6).
none of my machines is able to get anything through the network to the printer.
at least they don't get the printer to print a page.
today i spent (almost) the whole day, trying out things to get it fixed this time.
none of it worked.
just to let you know:
i can access the printer through its http-interface.
i can ping it.
it gets recognized by the printer/fax-dialog in the system-preferences.
here's what i tried so far:
i tried to install the osx driver for the epl-6200 with every single protocol that's available in osx (i.e.: Appletalk, IPP, Bonjour, EPSON (IP), etc.)
i of course tried to update the driver with the latest software available on the epson-website. and did the thing with the different protocols again.
i tried the "generic" postscript driver of osx, too.
then it was getting interesting:
i tried to get "cups" for the epl-6200. i don't want to get into details here, but to drop some names:
foomatic-rip (combined with ghostscript)
http://linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
gutenprint (doesn't have an epl-6200 driver included)
pxlmono (doesn't have an epl-6200 driver included)
to sum that up:
there are two drivers on the "openprinting"-site (foomatic). but one is (of course) the official epson driver.
but:
there is a "third-party" driver downloadable on that website.
http://openprinting.org/show_printer.cgi?recnum=Epson-EPL-6200
well, i downloaded it, installed the required additional software (foomatic + ghostscript), all very fine. i could choose it in the osx printer setup menu.
but:
my printer still won't print a single page.
the error messages i got:
other than the above post none of my programs ever crashed, or was "dead slow".
but:
the printing job got constantly stopped, i could restart it, but it was then stopped again. without any error message.
there was the same thing with the halt of the printer (also monitored in the printing cue window). i could restart it, but it would stop again. without any error message.
but i also got two decent error messages: :))
the first involved the pdftoescpage.app, either it was failing (shown in the printer cue window), or it was crashing (i got the error message in a separate window popping up). according to folks on the net this malfunction involved user permissions, so i to set up the "right" permissions (giving everybody the right to do anything (rwx) - i know i shouldn't have :)) ). but it didn't help. still crashing or failing.
the second decent error message, finally:
"double free" - what that meant, i cannot tell.
conclusion:
i don't know. :))
required action:
i will await the next osx update, and hope it'll be fixed then. :))
good night, y'all
p.s.: ahh, if anybody knows anything i didn't and should try. please drop a line. thx

Can't find printer in epson printer utility

just set up new epson sylus photo r220. works great but can't check ink levels because when i open epson printer utility no printers show up. if i try opening the printer fron the "print & fax" box in system preferences and click on "supply levels" i get a "information not available" box.
any ideas?

Syd, you only need the GIMP Print driver if your printer doesn't have a driver for Tiger that is available from your printer's manufacturer. If reinstalling the printer's driver from the Cd that came with your Epson doesn't work, then you'll probably have to reinstall the system this time deselecting the GIMP Print driver as an optional install. Then install the Epson driver according to the instructions that came with your printer if the driver isn't already installed by Tiger.

How can I restart printing to Epson printer with error message Connection failed: NT_STATUS_BAD_NETWORK_NAME

My Mac Book Pro OSX 10.6.8 has suddenly stopped printing to Epson Stylus Photo RX690 after many successful print runs.
Print attempts are paused with the Message:
Connection failed: NT_STATUS_BAD_NETWORK_NAME
The Epson is shared with a Toshiba laptop with Windows Vista.
All assistance is appreciated!
Cam Opie

Pulling one out of the air here, since it looks like you don't mind trying stuff...
Have you tried it with a trailing slash yet?
About the best I can make out of...
http://www.mail-archive.com/[email protected]/msg42165.html

Since Firefox 28.0 update, I'm unable to print to Epson WF2540 - Font? Resolution?

I'm unable to print from a previously saved word document, nor anything from the web. All printer diagnostics have been checked and verified OK. Help?

See this .
*https://support.mozilla.org/en-US/questions/991016?

Colors off when printing on Epson printer from Indesign

I'm new to Indesign. I'm a photographer trying to print a booklet for a handmade book.
My question is about preparing photographic images for use in Indesign.
I have JPEGS, saved as RGB files at 300DPI. I'm printing on an Epson R2000 using a custom paper and custom ICC profile. In my Color Management dialog I have Let Indesign handle colors and the correct printer profile selected. Output color is Composite RGB. The colors are really off so obviously I'm doing something wrong. I'm no expert so any advice much appreciated!

Hi - I disabled the custom profile for my Moab paper and whilst the green hue is gone, the colors are dull. My question is should I save my images in Photoshop to CMYK? As opposed to RGB?
Should I change the color profile assigned to Indesign to Adobe RGB? This was the original color profile of the image in Photoshop.

MacOS 10.6.6 & Firefox 3.6.13 can't print with Epson printer (ok w/Safari)

When I try to print ANY page, any type (html, doc, pdf) print dialog box show a page on hold. When I hit resume to print, the page is deleted. With initial download, printing worked for about 2 weeks. Epson says they can't help because printer works fine with safari (which I prefer not to use) and any other documents. Just deleted Firefox today and re-downloaded but new version does not print either.

Hi,
I can explain this in English.
A Screen Share is made up of two parts in iChat.
It is an Audio Chat with the Screen Share part along side.
The Screen Share is a VNC connection
The Router has to be using UPnP (Universal Plug and Play) as the port the Screen Sharing part is on is a Random port.
Also check your ISP does not block VNC connections
The 10 Sec error message means something outside of iChat cause the connection to be broken.
9:46 PM Thursday; July 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Printing problem with EPSON printer.

Hi,
When we take print on EPSON printer, some content on the right hand size of paper is not getting printed and that part of paper remain blank.
Setting for the same task have been done as,
1 ) we are printing document using perforated paper of size (35CM x 29CM) on EPSON LQ-1070+ printer.
2 ) We have added custom page-format for size 35CM X 29CM in custom device type ZSAPWIN (copy of SAPWIN) and using the same for printing.
Do we need to maintain any setting in windows ?
Please guide.
Thanks in advance,
Amit Raut

Hi Amit,
Have you checked by printing Word document on same printer??...
If the right part of the paper still left blank, then margin setting of the printer in windows has problem,
Otherwise check it in SPAD only.
Also check your Margin settings at printer.
Regards,
Audy

Epson Print CD problem

It appears at some time in the past few months a problem with directly printing to CD/DCDs on Epson printers has developed. It occurs on older 10.2, 10.4x and the new intel based software. My G5 running 10.4.8 was working fine with a R300 epson, when suddenly a few moths ago the CD printing would not work with the Print CD software. It gave an error message that the CD/DVD tray is open. I though the printer CD tray maechanism was busted so I bought a new R340: same problem. Resinstalled software, deleted software, reinstalled origional 10.4 OS. Epson says that the error message you get now when you attempt to print (the epson printer driver dealing with CD Printing is not installed) is "normal" you should click OK, next screen click manual print upper right, settings-page attributes, format-pick your printer, paper size-A4 (this is critical there are two A4 choices you must pick the plain A4). Click OK. make sure your printer is still selected. in copies and settings pick media type and then pick CD/DVD. You can now save this as a preset.
If you uninstall the software make sure that you delete the Epson folder in applications, the epson printer utility in utility folder, The epson files in the home users/preferences folder, ultility/ printer delete epson folder. empty trash restart computer, reinstall software, go to printer setup in utiltity folder and locate and add your printer

thank you thank you thank you! I've been pulling my hair out with my Epson R1800 print to CD issue (no driver etc...) called epson an hour later they were no help... this post gave me the info to try that DID allow me to print on my CD/DVD's.
I know this was an old post, but it was a NEW problem for me - so again - thanks!

Epson RX-700 cant use Epson print CD function .....

Since i upgrade from MAC OS X 10.4.10 to 10.5 i can print page as usual but the Epson Print CD do not work and give me a message ; cant find the drivers for the application.
What i can do ..... please Help.

Reseting printer function from Pref Conrol panel = no result.
Install the driver from Epson website = no result.
Option to select printer in Epson Print CD are Greyout and cant be selected.
Printer can print on paper but not on CD ot DVD ....

My lap top is connected to my Epson printer and I have no problems printing emails or word docs

When I try to print a PDF I get the following mesage ' To be able to print you first of all need to be connected to a printer' My Epson printer is showing connected as my default printer,but I cant print.Help?

Hi matchsaver,
Thank you for posting on the forums. Kindly help with the information listed below.
Operating System you are working with
Exact version of Acrobat
Can you print from other application, like word?
Thanks,
Vikrantt Singh

Print-controls for changing font size & cpi

Hi ,
I want to know how to use print-controls in ABAP-simple reports for changing font size & cpi for headings and then detail list should be with different font & cpi.
please help with example.
thanks
Vinayak.

Hi Vinayak,
Just use the command PRINT-CONTROL CPI <characters per inch> and PRINT-CONTROL FONT <fontname> to switch from CPI and Font wherever you like.
Regards,
John.

Printing problem with printer EPSON 1070+

Hi ,
I am printing Document using SAP smartforms on EPSON 1070+ Printer. The device type used for task is EPESCP.
Page foramt I am using is DIN3.
When print is taken on specified printer it is printing all content of document in one font and not in the font which has been attached part of text.Document is display properly(text in different fonts) in print preview,but output on actual printer comes differently.
What should be done to correct problem ?
Thanks in advance,
Amit R

Hi Amit,
Have you checked by printing Word document on same printer??...
If the right part of the paper still left blank, then margin setting of the printer in windows has problem,
Otherwise check it in SPAD only.
Also check your Margin settings at printer.
Regards,
Audy

Problem pdf created by Epson Printer.

When I open a pdf created by my Epson printer (WF-7620) I am asked to install an Asian language pack. I do not want to install this pack. How do I stop it?
I have contacted Epson support who told me to contact Adobe as they could not see a way to stop it.

Here are my findings:
The last two files do not have any "real" text in them, and therefore contain no fonts, which is fine as they're just images.
The first file contains selectable text, probably the result of an OCR process by the Epson software, and has 3 fonts used in it: Times-Roman (Type 1) and two forms of a font called Kozuka Mincho PR6N (TrueType), which is a Japanese font owned by Adobe (http://store2.adobe.com/type/browser/P/P_1812.html).
The usage of these fonts is what causes Reader to ask that you download the Asian language pack (they're probably included in it), so that it could display the text correctly. This doesn't look like an error to me. It's the font specified by the Epson software when it processed the file during the OCR process, and Reader is just respecting that choice, even though there's no real reason to use this specific font.
One possible solution would be to check the settings of your Epson software and see if you can specify the language of the OCR text, or better yet, the actual font used for it. If you can't customize it then you can't really solve this problem unless they change their application (or you install the font pack).
Here's a screenshot of the Fonts tab of the Document Properties for the first file from Acrobat Pro XI:

Problem in sap script check printing with EPSON FX890 printer

Hi
I am trying to print a check through F-58 using a script.
We have a new EPSON FX890 dot matrix printer, But when I fire a check the the formatting of the check is not proper. The alignment is never the same as given in the SAP script. this could a problem with the printer set up and configuration in SAP. Could anybody please give me some inputs on what needs to be done. its Urgent. Can anybody give me what needs to be done and also guide me with Print control commands in SAP scripts
Thanks,

Hi,
Here is some steps you should follow for scripts printout.
1. Validate the drivers used in SAP (Tcode SPAD)
2. Are you printing through a print server or directly to the printer
3. If it is througha print server like windows, you should validate to have the right driver installed for that printer.
4. Validate on the printer the default setting. If the script doesn't sent the proper font or setup, it will print using the last setup sent to the printer.
So if somebody used work and print a specific document with different setting, some time the setting stays for the SAP report.
To validate the setup of the printer, just turn off and on the printer before sending the SAP form. That should help to see if the setup has been changed by another program.
I hope those simple steps will help to solve your problem.
Reward if helpfull...
Cheers,
Rakesh.

Print on Epson printer font 17 cpi

Similar Messages

Maybe you are looking for