'Print one copy' is OK, print from dialogue fails

Using MacBook pro with 10.8.2 and CS6 13.0.1, with Kodak 2170 printer.
I can select "Print one copy" from the file menu, and the file is sent to the printer and prints fine.
But if I select "Print", it brings up the usual Print dialogue window, and shows my printer, but no matter what options I chose, when I click "print", nothing happens. the file is not sent to the printer.
Any suggestions?
Thanks

hate to sound like a moron, but how would i check that out? all i know is i installed the printer by going to the print/fax tab in system prefs, clicked the "+" button, clicked the windows tab, selected "workgroup," then the location of the print server, then, after logging in, selected "direct" from the three options. this is the same way I installed this printer in tiger and never had any probems.
thanks for the sleuthing.

Similar Messages

  • Imposed books only print one copy

    Greetings,
    I have upgraded to CS5 and Quite Imposing software. Quite Imposing is quite nice and CS5 is great to work with.
    I have one last hurdle : Imposed books only print one book copy on 8.5 x 15, 28 duplexed sheets in this cvase. After the first book is complete, the red attention light on the HP 4200 Duplex starts flashing, the message is "Tray one must be loaded with standard letter 8.5 x 11 inch paper."
    The problem is that I print duplex on 8.5 x 14 paper.
    I have tried every selection I can find but can't make 8.5 x 14 be the default size now that I've upgraded.
    How do I instruct the printer to stay with 8.5 x 14 after its printed the first one at that size?
    Thanks,
    Garrett

    Peter !
    I'm glad to hear that I'm not the only one with this problem.
    Now it has occurred differently :
    One sheet letter size .indd > export to .pdf > printed one copy then printer started blinking and asked to change drawers, this time the paper size change requested was from letter to legal, rather than visa versa .
    I then pushed the green check button on the printer and it asked if I wished to return to drawer 2 letter size, I pushed green check and it resumed printing.
    Thanks for your time, I am attempting to help so I can be proud of myself,
    Garrett

  • Networked HP Laserjet 1022 only prints one copy at a time!!

    Hi, I am using a HP Laserjet 1022 printer connected to a Windows Network. Although the exact driver is not listed I get around using the closest driver in the list. Under Tiger everything was fine, after upgrading to Leopard I can only print one copy of a document at a time. When I put any number of copies in the box only one copy is printed.
    Thank you in advance.

    read this thread here and my solutions about the 1020.
    The driver is also for 1022.
    Works great with leopard and 1020, needs to work perfect with leopard and 1022.
    Download and do as I describe.
    http://discussions.apple.com/thread.jspa?threadID=1199741&tstart=0

  • I can only print 1 copy at a time from indesign booklet on my xerox d95

    I can only print 1 copy at a time from indesign booklet on my xerox d95>

    I've never used Print Booklet or your printer, but some things are determined by the printer and printer software, rather than the program from which you are printing. You might want to see if Xerox's website has any info also.

  • Printer will only print one copy no matter how many I put in.

    Hi Im now using Windows 7 Word 2010 and since then I can only ever print one copy of my document no matter how many I ask for.  Has this happened to anyone else.  I have tried using a newer printer in the hopes it was a printer communication problem
    but still only printing one document.  Was fine using XP but not this.  Any help would be greatly appreciated.  In business its very frustrating to have to keep going into the print section and ask repeatedly to print for a letter to get the
    copies I need. 
    Regards Kaz

    Have the same problem with windows xp and Word 2007 and Excel.
    I fixed the problem with disabling advanced printing feature on printing preference->Advanced->advanced printing features.
    This was with a kyocera 3820 laserprinter. hopes it helps u

  • Can only print one copy

    Ricoh Aficio MP C5502A
    Indesign CD5
    Can only print one copy at a tme. Have tried PS and PCL drivers. ANy ideas?
    Thanks

    Hi,
    Even if you print 1-page document with a simple text Frame content?
    Jarek

  • Can only print one copy at a time in AppleWorks since upgrading to Tiger

    Since upgrading to Tiger 10.4.3, (now using version10.4.6) and AppleWorks 6.2.9, I cannot print more than one copy of my document using either of my Epson printers, a R200 and a C86. I did not have this problem with Panther and AW 6.
    Apple techs said to reinstalled AW, did not help. Then did a complete archive and reinstall of Tiger, no help, then created a new preference folder, no help.
    I found by trial and error that my Grammarian spell and grammar program by Linguisoft uses an input method to be active in order to correct AW documents. I sent them an email and their reply was, this is a bug in Mac OS X 10.4.x (all versions as of Nov, 2005) Specifically, if an input method is active, you will be unable to edit the number of copies or page range values in the dialog versions of Print and Page Setup. This is not a problem in the sheet versions of Print and Page Setup.
    Certain older applications still use these dialogs (i.e., AppleWorks) instead of the more appropriate sheet equivalents. To clarify the difference, the sheet versions are "attached" to the actual document you are printing (take a look at, say, TextEdit), while the dialog versions appear modally in front of all document windows in applications that use them.
    I wrote a three page letter to Apple and received a call from them, it seems that for now no upgrades to correct this problem is in the works, so for now I will have to make my corrections to all documents that I am working on, then change the input method in Grammarian and print my copies, then go back and make Grammarian active again.
    Any suggestions on how to resolve this problem or am I the only one?
    iMac G5   Mac OS X (10.4.6)  

    Hello DaisyMay,
    You're quite welcome. Very glad to hear it helped!
    Yet I'd like to mention the true ones of merit are the contributors of the original Japanese thread. I've just summarized and translated a bit.
    Regarding why it takes so long to fix this bug/flaw, I suspect that it is because it won't affect the majority of American users who do not use input method at all, and besides, it seemingly affects only Carbon API, that Apple Computer Inc. is liable to neglect lately.
    However, input method is a vital piece in CJK (Chinese, Japanese, Korean) languages, and any other languages that use more than 256 characters, and also quite a few Carbon applications are still in service, so for us (Japanese, e.g.), this bug/flaw is quite unacceptable.
    It's new for me to know a non-CJK program, Grammarian, uses input method. Now I understand you'd see this bug/flaw unacceptable as well!
    At least one of the contributors of Japanese thread said he let Apple Computer Japan know this problem via official telephone support channel. Also other said that Ergosoft Corp., the maker of EGWord, stated that this is a known-issue of OSX10.4 and they can do nothing but wait for Apple to fix it. Ergosoft has been specialized to Macintosh platform since 1984, so it's quite unlikely they had not reported this problem to Apple via developer channel.
    After all, I think Apple knows this problem, whether a bug or a flaw.
    Well, possibly, it might not be sufficient for an end-user to point out the problem via Apple's telephone support channel...
    In such case, you may try this form -
    http://www.apple.com/macosx/feedback/
    In my humble opinion, they should shortly fix this, and meanwhile they should promptly publish the user-proposed work-around methods as a Knowledge Base article.
    Have beautiful May,
    Hiroto
      Mac OS 9.1.x  

  • Imposed document only prints one copy at a time

    Hi,
    Printing a 100 page 25 sheet imposed 8.5 x 14 Acrobat document is limited to only one copy. At the end of the first copy printing; printer stops and requests letter-size paper, for drawer one,
    printer default is set for 8.5 x 14 and first print ran from drawer 2.
    Older CS 2 imposed files, imposed by Lowly Apprentice, still print multiple copies on HP 4200 duplex.
    OS 10.5.8 iMac duo core intel.
    ID CS5 book > flight test clear > .pdf > open with Acrobat 9.3.2 > impose with Quite Imposing > save imposed pdf > prints only one at a time
    then printer stops and asks for different paper in different drawer.
    Garrett

    Hi Garrett,
    I'm glad your back in production. As for the issue you're having with the printer you'll have to contact HP or Adobe.
    Quite Imposing Plus doesn't Print, it just imposes the PDF pages and Acrobat is the Printer.
    I'll send this off to Engineering to see if they have any other thought why it might be doing this. However, if all the pages are the same size and the orientation is the same, I've never heard of Acrobat and HP not printing correctly.
    cheers,
    Charles
    From: Garrett Connelly <[email protected]>
    To: Charles James <[email protected]>
    Sent: Sun, June 27, 2010 11:28:57 AM
    Subject: One copy only
    Hi Charles, I have a second printer related symptom you might wish to know. Printing is limited to only one copy. At the end of the first printing; printer stops and requests letter-size paper, for drawer one, printer default is set for 8.5 x 14, first print ran from drawer 2. Older imposed files from CS 2, not qi, still print multiple copies on HP 4200 duplex, slow yet reliable, and repairable. OS 10.5.8 iMac duo core intel. CS5 with Acrobat 9.3.2 Luckily, I'm probably the smallest international publisher on planet earth. Not so luckily, with eleven years of untrained habits. Anyway, I figured I should run this by you first. Thanks for putting me back in production. Cheers, Garrett PS > The auto rotate and center function on/off selectors are grouped as one, Acrobat print dialog; result in preview is vertical instead of landscape, one page rather than two.

  • My laser Jet 1320 will only print one copy, even when asked to print mutiples. Any thoughts?

    I have a Laser Jet 1320. I have windows Vista (I know!!!) It will only print one document despite being instructed to print 2 or more. I have tried re-installing the drivers but to no avail. Does anyone have any solution possibilities. Thanks

    Then use the latest solution!
    Which doesn't need specifying either.
    Peter

  • Can one 'copy' Shadow\Stroke settings from one graphic to another?

    I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
    Is something possible here?
    Ben

    Ben Low wrote:
    I'm always juggling hundreds of stills. I'd love to be able to just copy the Shadow settings from one still to another. Or to be able to 'lock' the setting so that they are all they same when applied to a set of stills.
    Is something possible here?
    Yes:
    - select your shape you want to use as a "style model"
    - <pre>Format > Copy Graphic Style</pre>
    - select all the shapes you want to apply the same graphical style to
    - <pre>Format > Paste Graphic Style</pre>
    You can also adopt it as a default graphical style forever:
    - select your shape you want to use as a "style model"
    - <pre>Format > Advanced > Define Default Shape Style</pre>
    dan

  • How to print one (or more) page only from multipages report?

    Citations from Report Builder Help:
    To print a report from the Runtime Previewer:
    1. In the Runtime Previewer, click <Page Setup> in the toolbar to verify your printer setup.
    2. Click <Print> in the toolbar.
    3. In the dialog box, type the number of pages and copies you want to print.
    If you ran the report with a DESTYPE of Screen, a warning appears that you should run the report with a DESTYPE of Preview before printing. Preview creates PostScript output, which is typically more desirable for printing bit-mapped reports.
    4. Click OK.
    When I click <Print>, the dialog box is not dispaying and all report pages are sending to printer.

    Hi Al,
    Check out this thread: Sort within Break? I was looking to preserve a basic sort for break purposes, but the same solution should work for keeping one row at the bottom.
    Let me know if you'd like more details.
    --Jennifer                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Windows PC can only print one copy at a time

    I've got a PC connected to a Mac printer via Bonjour. It works fine, except for this new quirk we discovered today... when attempting to print 30 copies of a PDF, only 1 copy would print. Any suggestions (other than hitting Print 30 times in a row)?

    Do you have a Brother printer by chance?
    http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/002000/0 00036/faq002036000.html?reg=us&c=us&lang=en&prod=mfc9420cnall

  • Hp laserjet 5550n forgets jobs, can only print one copy of a doc at a time

    We're using a Laserjet 5550n in a small office running Mac OS X 10.3.9 to 10.4.6.
    We're encountering countless problems when trying to print, and I'm pretty sure I've ruled out the computer setup as the culprit (reset printing system, emptied CUPS caches, repaired permissions, used 'printer setup repair', etc ).
    Whenever I try to print multiple copies of the same page it says
    *Unable to store job at printer
    *Insufficient disk space for this job'
    However, storing jobs is switched off anyway!
    Another huge problem is that the printer simply 'forgets' large printing jobs. CUPS (at http://127.0.0.1:631) says "printer processing, "Ready to print."", and then just goes back to 'idle'.
    When you expect the printed pages to come out nothing happens, and the printer hasn't even started blinking.
    We've had this printer for 16 months now, and the problems started just when the warranty had run out.
    The 5550n has no additional memory than what it came with
    DIMM Slot : 128 MB DDR
    DIMM Slot 2: Empty
    CARD SLOT 1: 32 MB F/W FLASH
    I've tried upgrading the firmware to the latest version (20060403 07.009.0), to no avail.
    Is there a more detailed log somewhere that I could try looking at to figure out what's going on? The printer web interface Event Log is useless without more detailed explanation.
    The printer doesn't give any error messages (though at some point in the past it did say things like "card slot not initalized" or "49.xxxx PRINTER ERROR". I then reinitialised the memory I think ( the 49.xxx error disappeared after that).
    I read somewhere about bad RAM or corrupted flash memory. Is there a way to find out if that's the cause?
    Many thanks for any ideas.
    Jens
    iBook 1.2GHz 1GB Ram   Mac OS X (10.4.6)  

    I did that - It doesn't list any obvious (well, to me) errors. The job that the printer 'forgot' seems to have come through OK, at least on the computer side.
    I [14/Aug/2006:14:25:38 +0100] Job 1366 queued on 'hpcolor_LaserJet_5550__E790D9' by 'username'.
    I [14/Aug/2006:14:25:38 +0100] Started filter /usr/libexec/cups/filter/pictwpstops (PID 2651) for job 1366.
    I [14/Aug/2006:14:25:38 +0100] Started filter /Library/Printers/hp/filter/hppostprocessing (PID 2652) for job 1366.
    I [14/Aug/2006:14:25:38 +0100] Started backend /usr/libexec/cups/backend/mdns (PID 2653) for job 1366.
    I [14/Aug/2006:14:29:02 +0100] Adding start banner page "none" to job 1367.
    I [14/Aug/2006:14:29:02 +0100] Adding end banner page "none" to job 1367.
    I [14/Aug/2006:14:29:02 +0100] Job 1367 queued on 'hpcolor_LaserJet_5550__E790D9' by 'username'.
    I [14/Aug/2006:14:29:02 +0100] Started filter /usr/libexec/cups/filter/pictwpstops (PID 2656) for job 1367.
    I [14/Aug/2006:14:29:02 +0100] Started filter /Library/Printers/hp/filter/hppostprocessing (PID 2657) for job 1367.
    I [14/Aug/2006:14:29:02 +0100] Started backend /usr/libexec/cups/backend/mdns (PID 2658) for job 1367.
    E [14/Aug/2006:14:47:00 +0100] load_job: Unable to queue job for destination

  • How does one copy tables, views, etc. from one database to another?

    I do not have a strong DBA background but have been placed in charge of updating and migrating a number of tables and views across multiple databases.
    For the future I need a better workflow than exporting and importing tables to/from .csv files and copy and pasting the SQL from each individual view.
    Can somebody point me in the right direction? I'm happy to do some reading but have no idea where to look.

    The Export utility provides a simple way for you to transfer data objects between Oracle databases, even if they reside on platforms with different hardware and software configurations.
    When you run Export against an Oracle database, objects (such as tables) are extracted, followed by their related objects (such as indexes, comments, and grants), if any. The extracted data is written to an Export file.
    To use Export, you must run the script catexp.sql or catalog.sql (which runs catexp.sql) after the database has been created,Ensure there is sufficient disk or tape storage to write the export file,Verify that you have the required access privileges.
    Interactive Export Prompts
    If you prefer to let Export prompt you for the value of each parameter, you can use the following syntax to start Export in interactive mode:
    exp username/passwordExport will display commonly used parameters with a request for you to enter a value. This method exists for backward compatibility.
    let me know if you have any further query!

  • Importing only one copy of each photo from iPhoto?

    Hi all,
    I'm using Aperture 1.5.2, and I'm trying to import my pictures from iPhoto. However, for each image that I've edited with iPhoto I get a two-photo stack containing the original and the edited version. Is there any way I can import my photos so that in this case, only the edited version is imported?
    Thanks in advance for any pointers!
    MacBook Pro (Core 1 Duo)   Mac OS X (10.4.8)  

    hello, ben
    quote: "I'm using Aperture 1.5.2, and I'm trying to
    import my pictures from iPhoto. However, for each
    image that I've edited with iPhoto I get a two-photo
    stack containing the original and the edited
    version."
    http://docs.info.apple.com/article.html?artnum=302903
    That's a good solution. However, I have recently been through all my copies of images that I imported from iPhoto. I found that in some cases I was not happy with the result of the edited version, and others the edited version was fine, so I did not consistantly remove the same version of each image.

Maybe you are looking for