Print only approved PO

Hi Friends,
My Clients requirement -
1. Print PO only if its approved.
How can we configure this. Please suggest.
Regards,
Jackie

sappassion2011 wrote:
Hi Dakshesh,
>
> User can print unapproved PO.
>
> How to control it.
>
> Regards,
>
> Jackie
Dear ,
It is not possible to take print out by ME9F before release,but it is possible by ME22N and ME23N. It is not advisable to client. So you need to Deactivate with the help of ABAP.
Also refer this post and check Edit Szabo's reply
output before po release
Edited by: redriver on Jan 30, 2012 7:45 AM

Similar Messages

Why cant I highlight part of a document and print only what is selected in safari?

Why is it not possible to highlight and print the selection in Safari, thought the imac was supposed to do everything, WRONG.
I also have I.pad 2 and because it does not support adobe flash, I cannot open a magazine that I have each week, I have to do this on the imac, so when away from home it again doesnt do what I want it to. Does everything people say. WRONG AGAIN.
Should have stuck with the laptop, it actually does do these things mentioned above.

I purchased the iPad first and waited a year HOPING Apple would fix this problem OR at the least provide something comparable to WINDOWS!
WRONG....and yes it is hard to believe for how ADVANCED Apple is.....that they don't have a simple easy program that allows you to HIGHLIGHT and PRINT ONLY what you highlight!
But....they are making leaps and bounds.....at least you can now cut & paste....thats a good thing!?
HOPEFULLY.......in the VERY,VERY NEAR FUTURE Apple will supply us with the simple software to do these simple time saving chores!
(highlight and print ONLY what you highlight)
Until then we have to cut and paste to several different apps or programs....hoping it will allow you to print ONLY WHAT THE USER WANTS TO PRINT!

How can I print ONLY the active document?

Whenever I go to File/Print the darn PSE 9 program sends all of the working files in the bin to the printer. I've searched online for 2 hours now looking for an answer.
I like to work with having several to many files in the 'bin' and prefer to only print the active file I'm currently working on without having to close the 'working files' before I can print. How can I print ONLY the active document or file in the project bin? Please help, I've upgraded from PSE 3 to PSE 9 and really like the updated features, but this one pain in the neck default is getting the best of me.

Thanks for your help, that works nicely. It is good to have control of the printer again.

HP Officejet Pro 8500 Premier prints only in black/MAC USER & won't align?

PROBLEM # 1) I've replaced all my ink cartridges, but can't find out why my printer is now only printing in black? I'm a MAC user, so I want to print in color, and am trying to find instructions for a MAC on how to get back to printing in color?
ACTION TAKEN #1
UPDATE: I've done a three level cleaning of the printer heads, which DOES print in color and each color block now looks great. The printer heads were not printing any color blocks, but the pink color block, until the first third level cleaning. I then cleaned the printer heads a second time all the way through the third level.
RESULT: However when I print from any document/web page my printer only still prints in black & white after these two printer adjustments double three stage printer cartridge claening?
ACTION TAKEN #2
I found this very detailed report and video on cleaning printer heads, alignment issues, and calibrate line feeds;
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01624398&lc=en&product=3964986&tmp...
The Print Quality Diagnostics Page looks perfect (including the alignment section) in all 3 test patterns, and again prints in color.
RESULT: However, my printer still will not print in color after trying all these steps?
IPROBLEM #2)I 've also tried a align printer which also prints in color, but states, "alignment failed see documentation manual"? To make the situation more complicated the alignment page looks perfect and prints in color before the error message displays.
After puling the power cord twice while ON and wiating 20 seconds, as discussed in the above link. my printer "won't remove the, "align error message see diagnostics manual".
RESULT: Printer "won't remove the, "align error message see diagnostics manual", even though the Printer Diagnostic Pages looks great, and the alignment page as well.
I'm operating a lastest version Macbook Air laptop OS X 10.9.4. I have not upgraded to a new operating system since this problem started a week ago, and Ive owned this HP Printer for 2 years.
UPDATE: ISSUE SOLVED. Well you can imagine when I say that I spent about 2 hours on this yesterday that yea he's right. This took a long time to research and try all these solutions. I told my wife about the issue and had her try:
ACTION TAKEN #3: Print a page from a second computer. Windows laptop printed a colored page from a web site.
SOLUTION: (Printing only in Black Color): Wife literally solved the problem in 3 minutes!
Look below at the presets drop-down arrow tab, which is right below the printer name: You will see PLAIN PAPER, FAST DRAFT, BLACK AN(D WHITE). I'm not sure how I checked this, but this is how you can print only in black ink. NOTE: I looked at dozens of answers across the web, and didn't find this info anywhere else!
This screen shot show you what the setting should be if you want to print in fast draft mode to use the least amount of color ink.

Hi monkplayer,
It looks like your problem is solved? There wasn't a problem with the printer itself, just the printer settings on your Mac?
This is good information though. We don't always have detailed solutions for customers that are using Safari, since it is hard to write instructions for the general public with specific steps for each operating system.
Best of luck,
Mary
{I work on HP's behalf}

Printing only in B&W

Hello,
When printing remotely through my Apple Express (version 6.3) it no longer conveys the color signal to my HP printer, only the black and white. It doesn't seem to be a printer or computer issue, as they work fine when connected directly through the USB.
Thanks in advance for any help.
Josh - Brooklyn, NY

An issue with HP not Apple. Thanks all

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

How can i print only pages which have been highlighted, from a multi page file?

How can i print only pages which have been highlighted, in a multi page file.

Ah, I see want you mean. This might not be practical for you, but if you select one instance of the highlighted text and add a [space] to the little sticky note, all of the highlighted text on that page will appear in the summary.

How to print only fatal error in log file in tomcat4.1

Hi all ,i m using tomcat4.1
1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
assume below ip address is corect:
this is exact printing in my log file
.12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
Edited by: Deepak23 on Oct 24, 2007 11:16 PM

One of my standard answers (which will explain the use of Directory Objects)...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

I have HP Deskjet 3510 connected wireless - problem is that it wants to print only black and white - is there a color button I am missing? The print quality report is fine in color etc.

I have a HP Deskjet 3510 and it wants to print only in black and white.
The Print Quality Report is fine and in color.
Is there a color button I am missing?

In the Print & Scan system preferences, does it indicate it is using a generic printer driver or a Gutenprint driver?
Also, if you click on Options & Supplies, you might want to check and see if has to be enabled. That kind of sounds odd though.
Another thing is it might not be showing. If the bottom of the print dialog has a button that says "Show Details," click it. Then, you can change settings in the popup menu.

How do you print only the first ten rows in a table?

Hi everyone:
I am trying to print only the first ten records by using <?for-each: <group name>?> and <?end for-each?>. Is there any stop tag that I could use to stop printing after the printing the first ten records without modify the XML data file? I am using XMLP Desktop 5.6.2. Thanks for your help!

You are right kkretser. However, if your report have 2 or more layouts pages. You may want to output the necessary records to each page like the first 10 records to the first page the next the to the second page. Like you said I figure out now that you can use <?if:position()<10?> print out the rows and then on the second page layout, you can do <?if:position()>=10?>. Thanks to all of your replys, guys!

Palm Desktop 6.2.2: Can't print only one category in Month View

I recently upgraded my palm desktop to 6.2.2 when I got a new PC with windows vista. When I am in the month view of the calendar and I choose to print, it prints all categories regardless of which category I have selected in the onscreen display. In my previous version of palm desktop running on windows XP I was able to print only a single category of appointmenets in the month view. I think of this as a bug. Is there any way to fix this?
Post relates to: Treo 650 (Sprint)

I have the similar problem. I have three separate calendars but when I try to print only one, the outcome is that the information in all three calendars gets printed as one. I cannot find a fix. HELP.
Post relates to: Treo 755p (Sprint)

I can not print only a selected part of a page

I have reset the print.print_printer and still can't print only the selected part of a page. I highlight what I want to print and use control P to get to the printer setup. Then I click the selection button and then OK. The preview screen shows what would print but the page has blank space above what was selected. This has only started to happen since the upgrade to FF 11.0. I have tried the same operation using IE and it works fine. please, is there a fix for this??

Hi jweigh,
This is a known bug. You should take a look at this thread:
https://support.mozilla.org/en-US/questions/923294
See the last post by Cww.
Hopefully this helps!

How can I print only the attachment without the email content

How can I print only the attachment without the email content. Every time I send to print, It prints the email itself with the attachment- can I cancel that?

Hello Riklama,
When you first open the attachment (e.g. on your phone) than you can mail only that attachment. Works fine with my husbands blackberry.
Elsy

How can I print only in black on my HP 6700 from my I Phone 5?

How can I print only in black on my HP 6700 from my I Phone 5?

Hi picheny. How are you printing from your iPhone. Are you using Apple's built in Airprint or the HP Eprint app? Airprint doesn't seem to have any such option. With Eprint, you can specify.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How do I print only the first page of multiple PDF documents?

I have about 1,500 PDF files (scientific papers) that I need to print only the first page of... Any suggestions on how to do this as a single job or as a few jobs? The files are organized in a bunch of different folders, so if there was some way to do this folder by folder, that would be ok too. Thanks!

Make sure that in System Preferences Printing & Fax pane you set the default printer to the one you want to use, then put all of these PDF files into their own folder, then open terminal and type the following (without hitting return afterward):
lpr -o page-ranges="1-1"
Then drag one of the PDF files into the terminal window (it will add it's path to the end of your command) and replace the file name with *.pdf, so it will look like this:
lpr -o page-ranges="1-1" /Users/todd/Documents/My\ Folder/*.pdf
Then hit return.

Print only approved PO

Similar Messages

Maybe you are looking for