"Print..." option always is in grey

Please, can anybody tell why "Print..." option is always in grey?
Regards

Thanks Richard, but the option that appears in the mode you indicates isn´t the one I want; I mean "Print"... not "Print image..."
What´s certain it´s that I haven´t been able to print a right copy directly from Aperture.

Similar Messages

How do i change the quality settings of my printer? the options are there but greyed out!

how do i change the quality settings of my printer? the options are there but greyed out! ie on my old HP I could print in draft if i wanted to print a doc to read and then bin...the option/box is there but greyed out so I can't select. HELP!!!

You can change the background display color in the playback preferences, either black, white, or checkerboard. This does not change the output color. If you want to add a color to the video, you have to place a custom generator underneath your video and change the color in the inspector.

Two sided print option is grey out

Recently, I noticed that when I need to print two-sided documents, the "two-sided" print option is greyed out. I have gone into System Preferences Printers & Scanners- and under "options" for the printer enabled the HP Two-sided Printing Accesory (Duplexer). This button continues to disengage (won't remain enabled) and each time I need to print two-sided, I have to repeat the above process. Please help

Hi,Try resetting the printing system and check if that may help:*Be aware that resetting the printer system will remove any existing print queue and reset any customized driver settings.
Click the Apple menu, and then click System Preferences .
Select Printers & Scanners.
Right-click (or Ctrl + click) your product in the Printers list in the left panel, and then click Reset printing system .
Click OK to confirm the reset.
Type your user Name and Password .
Click OK . The printing system resets. Next click the plus sign and select the listed printer. Within the Use drop down menu select the printer model and press the Add button. Hope that may help,Shlomi

I have a brother laser hl 1110 printer. the double side page printing option is greyed out and unusable. anyone know a fix for this? thanks. it prints single side okay.

basically the question is the same as the title of the discussion. double sided printing option is grey and unselectable. i can't figure out if it can be changed to on in the presets etc. would appreciate any help. i am using maverick and the brother hl 1110 laser printer.

Hello! I have the same exact problem and tried your suggestion. I can't find a duplex setting

Print option greyed-out

G'day
Here's a weird one. About 90% of the time, after I print a file out, the print option in the file menu greys-out, and stays greyed out until I restart CFB. Even if I CANCEL the print screen, the print option greys out.
Windows Vista Business, 64-bit. Stand-alone CFB install.
Adam

That's the "tree hug" feature
Heh.
In my defence, this is the first time I have tried to print something from any of Eclipse, CFE or CFB, in the 7-8yrs I've been using one or other.
Adam

I was able to print from adobe digital editions up to two days ago and now I do not have the option to print. The "Print" option is greyed out. Please help.

I was able to print from adobe digital editions up to two days ago and now I do not have the option to print. The "Print" option is greyed out. Please help.

Printing Expiry option might be set by the Publisher at server level. Right click on the book and select Item Info to know about the book permission.

Duplex Printing options in Livecycle Designer ES

Hi all,
I am new to using Adobe Livecycle Designer ES 8.2.
Issues 1:
What are options available to print “Duplex Flip Long Edge” and “Duplex Flip Short Edge”.
I have tried the following options
File + Form Properties + PDF print options + “Selected Duplex Flip Short Edge. It has worked fine if I print from Designer itself to the particular printer.
Through the program I have created XDP to PS file. It won’t print in “Duplex Short Edge option”.
It has always printed in “Duplex Flip Long Edge”.
Any one can help me… Thanks in advance….
Regards,
Jayakumar S

Hello all
The problem is still actual. There are some ideas on this forum about solution for LiveCycle Desginer 6.x and 7.x via JavaScript and via settings (Form Properties->PDF print options). The both don't work in LiveCycle Designer 8.2. Is it a bug of 8.2 version?
I have noticed that property <pagination> in XML source has always value duplexLongEdge. It doesn't depend on value you entered in Form Properties->PDF print options. May be it's a reason? However I cannot change this value to duplexShortEdge.
Regards,
Andrey

Connected wirelessly to Canon printer MX340. Duplex printing option is grayed out for me but not on my daughter's non-Mac laptop or husband's PC which is connected to the printer. Mine has two-sided option available at the Apple store. Any ideas?

We use a Canon MX340 series printer/fax/scanner. My husband has his PC hooked to it and my daughter prints wirelessly from it with no problem with her non-Mac laptop. I have trouble printing. Often it does not print and I have to delete the job from the queue. Other times it will print OK but two-sided printing is always grayed out in my printing options. When I took it to the Apple store and printed on their network (selecting their printer) the two-sided option was available. Makes me think the printer is set up wrong, but I am not certain. A fw times at home when trying to print I got an error message about incompatible fonts, but it printed anyway after deleting the job and starting over. Does anyone have any ideas? Thanks

OK, just an update.
Two years into this, I still find I can only do full duplex printing by using Windows XP running inside of VMWare. I've had occasional, ephemeral luck with duplex printing, but nothing long lasting.
I've tried this in Tiger and Leopard (now at 10.5.6), and I've had this issue with Canon printers MP780 iP4300 and MP610, direct connected to my Core2Duo 17" MBP. I also have this issue when printing over a network, but that's a much harder problem to solve.
Currently, this is my #1 most pressing issue for my Mac, because not being able to print from a computer when you print a lot is a really big drag, and using VMWare all the time is also a really big drag. Other people posting seem to be able to print in Duplex using the very same printers. What could be wrong with my MBP? I see the duplex box option, but most of the time it's grayed out as if my printer doesn't support duplex.
I've tried direct selecting printer drivers from the system preferences, but nothing seems to have an effect. And this is off of a clean Leopard install.
My wife now has similar problems with her new MBP - the Canon print drivers (CUSP & non CUSP) aren't allowing the Duplex box to be checked.
I am willing to pay good money to anyone who thinks they can fix this problem.
Thank you,
- Jeff

Default printer settings in Reader X? Why must I reset my print option each time?

Each time I try to print a pdf, the application takes over the printing duties instead of allowing my printer options to come up. There is the option to set printer options by clicking on the "Printer..." button. This is annoying to be sure, but the big problem is that I have to do this each time I desire double sided printing, which is always. If the application demands control over printing, it should be able to utilize the features offered by my printer and set a default print option. In the very least, it should used the last printer option selected. Is there any way to do this? It is annoying and often wastes paper as I use command P/Enter to print when I'm in a hurry.
On the up side, I love that it was easy to set the default page view/zoom options.

USB interface? Are you using one of those USB to parallel adapter cables?
They don't allow two-way comm - which is how the printer tells the computer "done with this page."
You can try this special USB driver that deals with this problem:
http://buymelunch.org/printing/usbtb/
Any reason you stopped using network printing?

Print without print options window popping up?

i have a class that sends a Component to the printer. a window always pops up to let you choosing printing options. is there a way to just send a job to the printer using the defaults so that the user doesnt have to hit ok every time?
thanks...

and Printer.printDialog
that's PrinterJob again

Print options open slowly when choosing "printer" icon or using CTRL+P.

This has been an ongoing problem where I work. Basically we view Purchase orders through Acrobat Pro or Reader and print them to wherever they may need to go. The Problem we have, on only certain computers, is that the print options screen is very slow to open (sometimes takes about 10 seconds to show up). On other computers; it works immediatly upon clicking the printer icon or CTRL+P. This problem is slowly progressing on almost all of our computers, once it opens slowly the first time. It is never fixed. Our I.T. department has been looking into it for a long time. They have tried everything I can imagine and more to fix this. Any ideas as to what causes this or how it can be fixed? I am asking personally because it slows down my production majorly and we have a certain quota to reach. Any advise it appreciated. Thank you.

This is probably obvious but you didn't say. Is this only happening on PDFs, or does it also happen out of other programs? Large or small or does it matter? And is it always the same PDFs?

Enable print option for transaction IW33

Hi,
Is there any way by which we can make the print option enabled in the transaction IW33 screen?.
It is currently greyed out and the requirement is to enable this option so that the user can take print outs from transaction IW33.
This option is enabled in transaction IW32. The program name for both these transactions is same but the GUI statuses are different.
Please suggest if we can achieve this functionality.
Regards,
Ravindra

Hi Ravindra,
I understand that, it is easier to give the authorization to IW32 than to fix the print issue from IW33. that i think is good solution for your issue.
Thanks,
Srini.

GPO deploy printer issue always "Pending addition"

Hi,
I use the GPO to deploy printer to all client, but the status of these printer always show "pending addition" as below:
Can you point me if anything I miss?
Thanks.

Hi,
Printer Group Policy Preference is exist in both Computer Configuration and user Configuration, and have three kinds of printers to deploy: TCP/IP Printer, Local Printer, and Shared Printer.
Which kind of GPP do you select and which GPP Action do you select? “Set the printer as default printer” option is not available in Computer Configuration Printer Extension.
You may try User Configuration\Preference\Control Panel Settings\Printers\new shared printer item.
For more information please refer to following MS articles:
Configure a Shared Printer Item
http://technet.microsoft.com/en-us/library/cc732092.aspx
Printers Extension
http://technet.microsoft.com/en-us/library/cc731562
Lawrence
TechNet Community Support

Printing option

I am a newbie to apple so please forgive me for this simple question which I can't find answer on apple support page:
I have a colour printer. On my PC, I have the option to print in black and white but on my apple I can't find the print option that enables my computer to just print in black and white. It's always printing in colour. This takes longer and is using up all my colour ink.
As well, does the Power G5 have an "economical" print function? My PC has this setting which, when selected, automatically prints documents faster, with less ink, and in black and white. Thanks so much - any advice much appreciated.
Power Mac G5

In the dialog box from the "Print" command ("File" menu), set the third selector (normally "Copies & Pages") to "ColorSync". Set "Quartz Filter" to "Black & White".
Also try setting the third selector to "Printer Features" for other settings.

Photosmart 6510 print option not highlighted

With windows 7, I can print when using Word but if I want to print emails or from the internet I can only do so on my ophotosmart 6510 by first saving to the desktop. The save option is available but there is no response from the print option which is in light grey. These are the only 2 options on offer
This question was solved.
View Solution.

Hello plg4,
Welcome to the HP Support Forums!
I see that when you try to print from the Internet or Email, you are only able to save. I would like you to try running the HP Print and Scan Doctor. This should clear up the issues, let me know the results.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

"Print..." option always is in grey

Similar Messages

Maybe you are looking for