Print Out and Previewer difference

Hi expert,
I'm using Report 6. Please help mw with the following problems:
1. Why the report looks great in the preview but it looks ugly when it is printed?
2. Why the report looks great when it is printed but it looks ugly when it is in preview?
Basically the Preview and the Printout is quite difference.
I'm using Report 6i on Client Server. Windows 2000. printing routes through a print server. The printer is Lexmark Optra S 1650.

I have the same problem. If the boiler place is more than a line, the previewer will show:
Boilerplate:
============
This is a man. This is a pen.
Previewer shows (in Indent Justify):
====================================
Thisisaman.Thisisapen.
Previewer shows (in Left Justify):
====================================
This is a man. This is a
If the line is longer than 80 characters, the rest of line got truncated.
Please help, expert.

Similar Messages

Font for Print out and Print Preview

Hi all,
I am working in SAP R/3 4.6C and using SmartForm.I have a trouble :
I uploaded Arial Font into System Font and Printer Font and i want to use this font for print out and print preview.But this font is only applied for print out and the print preview uses still Courier Font not Arial as I want.
So, anybody tell me why and give some idea to solve this problem.
Thanks .

Hi,
There is no arial font option in 4.6..but it 4.6 scriptforms arial option is there,but it will not work..it will give some other font...
Mainly 4.6 version does not support ARAIL font..
4.6 does not support all the fonts which are avilable in MS-WORD..only few fonts are uploaded into SAP 4.6 syatem...this is the problem
Regards
Kiran
Edited by: Kiran Saka on Feb 11, 2009 8:19 AM

Delivery schedule print out and number

Dear Expert
Our client need to implement the scheduling agreement in the company , but the requirement as follows their are two dept one is for vendor dealing and our is meant for requirement generation , so scheduling agreement is generated by one dept and delivery schedule will be generated by other , is it possible to generate different for delivery schedule?/it not how can we configure the system as such when we release the delivery schedule on the basis of FRC release procedure then only print out should be generated for the deliverry schedule and print out should only consider those line item of delivery schedule which are release no other , i.e if for e.g for 1st month the delivery schedule is generated against the PR 's for different line item of Scheduling agreement , then only those item wil be consider which are release as per the FRC , then for the next delivery schedule only those item to be consider in the print out which are release 2nd time. how can we map this scenario in the system
Regards
farhan

Dear Expert
can we customize system as such that we cannot maintained delivery schedule before the release of the SA
Regards
farhan

PO print OUT And material Document Print Out is coming In English

HI all.
I have Created Vendor In ZH(chinese Language,)and in material master I have maintained description in Chinese language.
I'M taking PO and material Documents print outs in Chinese Server log-in.
even Though Im taking Print outs in Chinese Log-In server, IM getting Print outs in English Language only not In chines language..
At the Time Of PO creation the Communication Language is ZH(Chines)..
I have read some related post even 89899..
But I have not find solution
plz help me.
thanks and regards
ramesh reddy.'

Check SAP Note 894444 - Tool for server-based printing on Windows (SAPSprint) for your requirement,
Installation
Before you install SAPSprint, delete SAPLPD manually. To do this, you normally need to completely delete the installation directory only. If you installed SAPLPD as a service using the srvany tool, you can remove the service by calling 'Instsrv SAPLPD remove'.
You can download SAPSprint as a self-extracting executable file from SAP Service Marketplace:
1. Entry by Application Group (on the left)
2. SAP Frontend Components (on the right)
3. SAPSPRINT (on the right)
4. SAPSPRINT <Release> (on the right)
5. SAPSPRINT <Release> (on the right)
6. Win32 (on the right)
Start the program. After you enter the installation path, the system prompts you to enter the TCP/IP port.
Normally, the default setting of 515 is suitable for the port. You should only change this setting if the Windows TCP/IP print service is also running on the computer. The SAPSprint Windows service starts as soon as the installation is over.
We recommend that you set up the following options for the service in the Windows Service Control Manager:
The service should run under a domain user that has the relevant authorizations for the required printers. After the installation, the service runs under "Local system account". This can access locally-defined printers only. You can set the user in the Windows Service Control Manager, in the options of the SAPSprint service.
If you want to delete SAPSprint, you can do so using the normal Windows uninstall tool.
We recommend that you install the SAPSprint service on a separate computer and not together with a SAP system, especially if you use a large number of printers. All printers that SAPSprint uses must be installed on the SAPSprint computer. This applies particularly to released printers from other computers. These should be installed as a queue on the SAPSprint server.
Also note further settings in accordance with Note 1069483.
Settings
You can display the call parameters available for SAPSprint by calling 'sapsprint -?' on the command line. The most important parameters are those that set options, especially log options for troubleshooting.
You can set the log level to 5 by specifying 'sapsprint -oi LogLevel 5'. Immediately after installation, no log level is set up, which means that no log file is created. By setting the log level to 1, 5, or 9, you can ensure that more information is available in the directory that you specified during the installation. A file called sapsprint.dbg and a print job specific file with a variable name are generated. The second file is deleted after successful printing. It is only retained if the printout is recognized as incorrect. If you set the option 'sapsprint -oi KeepFile 1', then both this file and the print file are retained. This is primarily intended for troubleshooting by SAP Support.
All options are case-sensitive. You can display the most important SAPSprint options by calling 'sapsprint -?'. All possible options are described in Note 85469. Normally, the options described there are not necessary - you should use them only in exceptional circumstances.

Font is changed when print out and other issues

Hi,
I need help with some of my issues with Diadem. I am quite new with Diadem.
I use Diadem to generate report from teststands. The data is passed from Teststands - VI using Diadem connectivity toolkit and a VB script is called to generate PDF and print out the computer.
1. First issue: the font on the diadem looks different with the one is printed out or in pdf. The font in pdf is bigger than in Diadem. You can look in my screenshot.
2. Second issue: sometime it cannot export pdf and the error message is Cannot open the .pdf file.
3. I need to get the channel name and the content of it in the script. Could you please tell me how to do it?
Thank you for your help!
Attachments:
issue1-fontchanged.png ‏40 KB
issue2-readonly.png ‏7 KB
DataChannels.tdm ‏16 KB

Hi NTT,
I was able to print a PDF file that looks good, though perhaps the missing link for me is the master layout file you haven't sent yet:
D:\G2\Scotsman_PS_EOL_Test_System\Software\Code\Support\Report\Scotsman-Ice Master Layout.TDRM
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
NONAME.pdf ‏35 KB

How do I save and re-use a fillable form once I have created it? It is a form i will use for multiple medcial clients I see, then print out and put in paper chart, and then do it again for another patient. - I just got Acrobat XI

I've created a fillable form from a Word document, but how do I save and re-use a a fillable form once I have created it? It is a form I will use for multiple medical patients, printing out the filled in form to put in paper chart (no need to save filled out form), and then fill blank form again for another patient? - I just got acrobat X

Thanks!
That should also save the blank form for future re-use, right.?
Can I also file the blank form in the file system, and then retrieve it as a blank form when I have a next patient need for it?
Thanks
Michael

MB90 print out and their plant relation

Hello dear friends,
I have copied a new plant from current plant. When I create any movement for current plant I can dislay their print outs from MB90. But when I create new movement in new plant. I couldn't display print out. I gave VN108 error. I am using Z type print output.
Am I need some configuration for print output?
Thanks

You can take a quick look at OMJ3, OMJ4 or OMJR to see if your new plant is set up the same as the plant you copied. You may also have to complete the entire configuration sequence for the inventory management output determination. The IMG path for these is: Materials Management -> Inventory Management and Physical Inventory -> Output Determination.
You should be able to get the output type printed by the copied plant using MB90 in order to guide you as to what additional configuration is needed. In the case of material documents the output types are like the following:
Type            Description
WA01     GI Note Vers.1
WA02     GI Note Vers.2
WA03     GI Note Vers.3
WE01     GR Note Vers.1
WE02     GR Note Vers.2
WE03     GR Note Vers.3
WLB1     GI Note RP Vers.1
WLB2     GI Note RP Vers.2
WLB3     GI Note RP Vers.3
Regards

PO Print out and data issue in Aribic Language -AR

Hi Guru,
Thanks in advance..........
I am facing problem in PO print out in AR language.
When i print Compnay phone no. of PO in E language is printing correct like - +962 4400402
But i select message type 'AR' then Company Phone No. printing like this - 96264420404+.
Can any one can suggest we have any FM for converting telephone no. in AR language in same format - like +962 4400402.
Regards
Durgesh

Hi,
I think it is the issue of text wrapping.
Are you using different text elements to display this text or same in both languages?
Thanks,
Archana

Is there any possible way itunes can resend my receipt for a specific purchase to my email again? I do not need it printed out and i know how to view the purchase in my account. All i need it an emailed copy of my receipt.

I need itunes to send me a receipt of a purchase i made about a month ago. I know about my account history and i dont want to print it out. I need the exact receipt. Please help

Contact them and ask.

Laser printer speed and spooling

HP LaserJet P2055dn (and previously the 6MP).
Fine when printing simple text files from Word or Quark, but so slow when a file contains illustrations. The main time is in the spooling of the file; it took 15 minutes for one particular file to spool and then print the other day - and if you ask for, say, half-a-dozen copies, then it'll take 6 x 15 minutes to do so; irritating when you need 150 double-sided asap!
Someone suggested that the problem might be that OSX does not allow printing to start on a laser printer until spooling is completed; inkjets, by comparison, start churning out their work as soon as you hit enter. Is this true?
And is there any way of speeding up the process of printing on a laser printer?

Shaun Ferguson wrote:
Fine when printing simple text files from Word or Quark, but so slow when a file contains illustrations.
And is there any way of speeding up the process of printing on a laser printer?
The resolution of your illustrations make a tremendous difference. What format, i.e., jpg, tif, pdf etc? The resolution of the output also makes a difference. Before printing in Quark XPress, check the Device: PPD and Resolution; Color: Grayscale; Pictures: if your illustration documents are Tiff documents, try UNchecking the box next to Full Resolution Tiff Output. Also in the Pictures section: you might try changing the Output to Low Resolution.
Also consider if a firmware update might help. See HP LaserJet P2055dn Drivers and Software
Note: I have an old HP LaserJet 4MV with one-tenth of the memory of the LJ P2055 and the speed of the print outs and release of memory afterwards is fine (as a PostScript 2 device and especially in comparison with a Brother MFC that is 15 years younger and a 1-year-old Epson inkjet printer.)
HTH

How to hide check-in, check-out and publish buttons

hi,
i am new here and hope someone can help me:
users of a community can edit some content items. they can open these items with this link (from administrators guide for al interaction publisher 6.5 p. 10-28):
</pcs:value>/published_tools/content_item.jsp?&view=submit&ciid=<pcs:value expr="pcs_id"></pcs:value>" target="_blank"></a>
the link works, users can edit the items.
problem is, that i do not want to show the "publish button" to the users. the content item should be published automaticaly after the user clicks on "save". i also do not want users to see the check-in, check-out and preview buttons. they should just open a content item (+ simultaneously check-out), edit it and save it (+ simultaneously check-in and publish and close the content editor).
i thought this can be done by the "view" parameter, but nothing happens if i use it. any ideas?
thx
volker
Edited by: vhspec on 03.06.2009 00:58

Hi vhspec,
This is a common problem. A creative way to solve the problem is to point yourself to the description field of each input on a data entry template. When you have the need to make any dynamic changes to the entry templates simply drop some javascript into the description field of an input and write the appropriate javascript code to either hide buttons, change behaviour etc. When the data entry template is displayed to a user the javascript in the description field will be executed by the browsing. Fortunately publisher does not check the description fields or encode them so you can get away with a lot.
The only problem with this approach is while you are altering the UI the underlying data model will still allow users to publish. So if an unauthorised user saw fit, they could publish content.
Have you considered creating a workflow so that users in specific groups cannot publish? that way only a controller down the line would be able to approve and publish.
Edited by: user8023716 on Jun 9, 2009 2:55 AM

Print out for PO

hi,
im facing the problem while giving the print out - ME9F.
not getting any print out when im giving..
can any one guide me.. wat is the procedure for printing PO & how to follow up the error
thanks in advance

Hello,
first of all go to transaction ME22N or ME23N , then get the Purchase Order you want to print-out and press the push-button "Messages" or follow the menu path "Go to --> Messages": here you should find the messages available for print-out linked to that document. Here you can see their status, print medium and time: if no message is listed here, so you won't be able to print anything with ME9F fot that document.
Hope to be useful.
Best regards,
Andrea

How to tack print out use with Query ?

Hi
I have to tack purchase order print out (print details- PO date, BP code, name, item name, Quantity and Amount . System Print Layout means from Purchase Order layout designer) use with Query
How to tack print out use with Query (system print layout means from Purchase Order layout designer) ?
Regards
Aravind M

Hi
I have to take purchase order print out and I created 3 templates for that purchase order in layout designer (Because as per the MIS requirement I created 3 templates, its cover more information). I have to take print out 3 templates at a time. So i try to take print use with Query.
Regards
Aravind M

Australian ABN in Customer Invoice Print out

Hi,
I am using the standard ByD Customer Print Out and everytime I print out, the two fields Our ABN and Your ABN are always blank.
We have maintained the ABN of both our company and customer company under Financial Data/ Tax Data but somehow they does not appear in the Invoice Print out (PDF). The customer ABN appears in the ByD Invoice though.
I checked the form and they are using standard data binding which displayed for other countries but not Australia.
Anyone has the same issue and know how to solve it?
Thanks.
Nguyen Ly

Hi,
Please check the table J_1IMOCUST for the customers you will find all the details like TTIN ,LST,CST ECC no. etc....
(J_1ILSTNO,J_1ICSTNO -fields)
Regards,
Krishna O

Print Out settings, Wireless Printing -- HP psc 750xi

I'm able to use my HP psc 750xi wirelessly using the 750xi footmatic/hpijs driver but whenever i change the print out mode, nothing changes. i like to print out most stuff draft, grayscale since it's so quick. but when i choose that option, it still prints out in color and takes a long time. bascially, no matter what output mode you use, it all looks the same.
I tried a couple other drivers but got the same results....i couldn't change the output mode.
any suggestions? different driver ideas? any help would be greatly appreciated!

Hmm....bummer, but thanks much for the info. Need to make do w/ this printer until cash flow is a bit better. So can I create 2 profiles for the same printer -- one w/ the HP driver for when I have lots to print out and am in my office (using USB connection) and one w/ the other driver that lets me print wirelessly? Just tried it but now I'm trying to switch back over to wireless printing and it's not recognizing the printer anymore....

Print Out and Previewer difference

Similar Messages

Maybe you are looking for