Print out for GR/GI

Halo
I have set the printer names in SPRO-Inventory- Print control, also maintained print indicators for GR & GI. But when i m trying to create a Spool in MB90 it is not picking up any document. It says No messages for initial process. What could be the reason? I have created conditions using MN21 txn code by entering the details for WA/WE series, still i am not getting the required output. I am able to do it by MB02 and assigning printer to each and every document, which one can not do each and every time when a GR/Gi is done. Where do I miss?
Samuel

For getting print of any material document u have to do the following
1) Assign print indicator in Print control ---> General settings --->print version 1-for individual slip and 3-for collective slip
2) Assign this print indicators to the movement type in "Maintain Print Indicator for Goods Receipt Documents"
3) Maintain condition record for output type with MN21 transaction for the combination of transaction/eventtype, print version and print indicator.
4) Then select print version (1 or 3) while posting goods receipt.  if u have already generated the document, u can do the same in MB02 transaction.  Here u will get a message that output is saved. 
Then u can go to MB90 and check for your spool
hope this resolves ur problem
award points if found useful

Similar Messages

  • Print out  for movement types

    Hi Friends,
    How to  configure print out for movement type 561 or for scrap ?
    Can you pl tell me step by step where and how to configure?
    Appreciate your help.
    Thanks,
    Venkat

    Hi Venkat,
    What you want to print. if you only want to print out the transaction done thr movement type 561. If you are not going through any development then follow the under mentioned process :
    Go to MB51- Select the material, Plant & storage location- put the movement type 561 & 562- select the ranges of date- execute it. System will give the report. Then for print out go to List tab and select the print. After clicking on the print tab, you have to fill some informations like- Output device- Put Locl then No of copies-then click on continue. System will give you to select the printer. Just select and print.
    If this is enough then ok otherwise inform me.
    Hope this will clear your issue.
    T & R,
    Brijesh

  • Output determination (print out) for service entry sheet

    All SAP Gurus,
    What are the steps involved in determining the output (print out) for service entry sheet?
    Regards,

    Hai,
    Goto NACE select the Application ES, out type NEU and maintain the program SAPFM11, Formroutine ENTRY_NEW, form ML_SERVICE_ENTRY aganist medium printout and maintain the condition records for printout to VN.
    take print in ML83
    Regards,
    eswaramanu...
    Edited by: eswar manu on Oct 21, 2008 8:37 AM

  • How  to take check print out for self and in favour of Bank for DD payment

    HI
    I have a requirement  to take check print out for self and in favour of Bank for DD payment from AP module, how it is possible.
    Syam

    hi syam,
    Step 1: Create a down payment request: F-47
    Step 3: Make payment through : F-58
    While entering the input parameters, Enter amount: 1050,
    For 50 Rs, you take Bank Charges account through GL Fast entry.
    Account Entry
    Vendor Dr (Spl GL): 1000
    Bank Charges Dr 50
    SBI Cheque Issue clearing Account Cr  1050
    Regards,
    Ramakrishna

  • #(hash) sign printed out for spaces material description in PO

    Hi All,
    I have problem with my sapscript form for PO, when preview, the material description is ok
    but when print out,  the space between the word of the material description become # sign like
    Leif#Eriksson#1oz#Silver#Coin###, this not happen to all item, only for certain material.
    When checked, these material are not created manually in system but is uploaded by BDC.
    In material master screen, there are no #sign either.
    Any solution or what should I check ?
    Thanks

    Well, as you've probably discovered by searching the forums, the # is a substitution for an unprintable character.   I would look at the data value in debug, convert that to a hex value with a chart, and see what needed to be done to either clean up the data values or substitute a space for whatever character(s) the # values represent in the output.

  • Print out for Goods Issue 531

    Hi
    We need to take the print out of 531 mvt
    What are the standerd Setting needs to maintain for the same,
    Regards
    Niti Narayan

    hi
    Check following if useful to u
    1. Maintain the Printer Name in SPRO->Malt Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01, WA02 and WA03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, forWA01/02/03 and  Tr Type WA, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    regards
    KI

  • Print out for Goods Issue

    SAP Experts,
    Can anyone tell me about T.code for goods issue print out?
    Full scenario we need.
    thanks
    babu

    Hi,
    from MB90 select below options.
    Output Type -WA03      
    ransmission Medium-1 (Print)
    Sort order-01 (Material document/Item/Output type)        
    Processing mode - 1 ( and 2-for repeat Output)  
    Material Doc. Year -2011 (as per Document created date)
    Material Document - Goods Issue Number
    Execute the same and proceed for Document Print.
    Regards,
    Sandesh Sawant

  • Print out for PO

    hi,
    im facing the problem while giving the print out  - ME9F.
    not getting any print out when im giving..
    can any one guide me.. wat is the procedure for printing PO & how to follow up the error
    thanks in advance

    Hello,
      first of all go to transaction ME22N or ME23N , then get the Purchase Order you want to print-out and press the push-button "Messages" or follow the menu path "Go to --> Messages": here you should find the messages available for print-out linked to that document. Here you can see their status, print medium and time: if no message is listed here, so you won't be able to print anything with ME9F fot that document.
    Hope to be useful.
    Best regards,
    Andrea

  • How to take print out for "Letter of Credit"

    Hi,
    We have configuration for Letter of Credit and posted some documents for it.Now i need to take print out of Letter of Credit transactions.
    Kindly help me in this regard...
    Thanks
    Suvarna

    Hi,
    SAP does not provide the entire life cycle of L/C. we only maintain the L/c Details in SAP.
    Thre is no standard that can give you the print. You may need to customise if needed.
    Caio
    Raghu

  • ME51N: Print out for Purchase Requisition

    Hi ABAP-developer,
    I looked within the forum for a customer solution to print out a purchase requisition (no export to Excel or list printing!). Because the PRs are internal documents there's no standard solution for this. Do I need to copy the formular MEDRUCK and the driver print program SAPFM06P? Could anyone help me with the source code and further information to this topic? Thanks in advance!

    Dear K.K. Chiluka,
    I was conscious about creating a new driver program, but your answer isn't as clear as I exspected. It's clear that I have to program the source code for selecting the EBANs and that I need a new formular (smart form) for printing. But how does the source code look like, what kind of 'CALL FUNCTION's do I need (WRITE_FORM for printing the textelements within the formular and others)? It's similiar to ME9F but could you please give me a more detailed answer. Thanks a lot!

  • Outline Print out for bullets & numbering

    Hi,
    In RoboHelp my default bullets have a left margin of say "0",
    but when I generate the print version they have a margin of say
    "1". It looks like this:
    1. xyz
    * xyz
    SSL Print out
    1. xyz
    * xyz
    Any ideas for a permanent fix?

    For anyone else the answer is:
    The margin settings for the numbered list can be tweaked by
    editiing the Lists style in RH (Format > Styles > Lists >
    Modify > Format > Paragraph >Indentation).
    If you don't see "Lists" as a style, make sure the box (Hide
    Inherited Styles), below the available styles is not checked, then
    it should show up.

  • Is it possible to take 2 PO print outs for same vendor w different currency

    Hi all..
    I have Created vendor In INR currency.
    client want to take 2 same PO print outs in 2 languages say one PO print in INR currency and one more in USD currency with out changing Vendor currency in vendor master..
    Is possible in SAP??
    Plz give ur views on this??
    thanks and regards
    ramesh reddy
    Edited by: Jürgen L. on Mar 6, 2012 9:06 AM

    yes, u can take print out in two langage, 1st take print out of 1 language then Change PO currency , not Vendor currency.
    but at a time, without changing anything, u cant do it.
    Thanks
    nisha

  • SAP HR-- In form 16 , i am not able take print out for all pages..

    Hi,
           In SAP HR module , i have totally 5 pages, i need to take the printout for all pages.. but i am getting only 1 pages.pls could u solve this problem
    Regards
    senthil

    There is no relation with module to printer settings
    check the printer settings for declared printer in output devices
    otherwise contract basis guy
    regards
    sateesh

  • I need to show me how to print out for a pattern

    How would like to print out a pattern that had been bought.

    In what format is the pattern? With what program are you opening? What happens when you try to print it the usual way?

  • Cheque print out for vendor multiple open line items

    HI experts,
                      I want to print a cheque using f-58 for vendor payment.The problem is when i click the vendor open items(vendor invoice) for a single line item  its getting displayed.But when i click for  vendor multiple  open items(invoices) its not getting displayed in the script out put.Its displaying only with single document number(posting).

    thank you..its solved

Maybe you are looking for