Print out of LOV

Dear Experts
Is it possible to send the data for printing that come in LOV. I want to pint it from LOV window
I am using form6i
Regards,
AK

Hi,
you can use the t.code for OPK8-DEFINE PRINT CONTROL
(SPRO> PRODUCTION> SHOP FLOOR CONTROL --> INTEGRATION --> DEFINE PRINT CONTROL.
This is your mentioned requirement matched. pls check with this t.codeOPK8.
Regards,
Mohan R

Similar Messages

Freezing when trying to print out PDF?

Trying to print out PDF of Aperture 'book'. Each time it freezes on the same page ... this particular page is where I have one image stretched across two pages. Is this possibly a glitch with Aperture?
Ben
I've trashed my preferences several times; doesn't seem to help. I've also tried to use two copies of the same picture (right half on right page, left half on left page); but that doesn't work too well, as Aperture seems to want to favor one side or the other – and thus I can't adjust the two sides to match up properly.
Any suggestions would be most appreciated, thank you,
Ben

Hi Allen,
I'm all topped up, big graphics card, latest ver. of Tiger, permissions repaired every day or so. The mystery continues.
I love the IDEA of the two page spread. Have longed for it in Pages, where I'm producing a whole series of books ... a lot of two page spreads (but done by using two versions of the same still).
Thanks,
Ben

How do I actually print out the background fill in a table's rows?

Hi guys and gals,
I have been trying to figure out this one for a while now and need some help in diagnosing it. I have a table with alternating colour fill on so that the first row is shaded grey, the next not, the next grey ad infinitum. Now if I print the document to Preview as a PDF then the alternating colours appear. If I then print that PDF document to paper the rows print with the correct alternating fill. If however I try printing the Pages '09 document straight to paper the rows all print out with no fill colour
I cannot seem to find an option anywhere to say "display but don't print the fill in this cell / row". Is there a setting in Pages? I have been through the Inspector thing with a fine-toothed comb but I'm obviously going blind. Or is this a quirk of my printer? If I print an image then it prints the colours ok with no scrimping to save ink. Again I cannot find a setting on the printer to disable the cell / row fill when actually committing a document to paper
So in summary:
Alternating fill produces stripey table on the screen
Printing to PDF shows a stripey table and can be printed to paper with stripes
Printing from Pages '09 to paper removes the stripes
I'm on the very latest version of Lion and Pages '09. My printer is an HP PSC 2179 with up to date drivers etc
Would love some help on this one and a virtual jeroboam of vodka to anyone who can resolve the issue
Cheers,
Andy

Hi Andreas,
I think you have nothing into SAP to find the structure of a cluster table.
The way I use, is to find a standard program that use this cluster, and I look in the ABAP code the structure used by SAP.
You just have to use the ST05, and use the option to see the code where the cluster has been readed.
Rgd
Frédéric

If you develop an image in lightroom then export to your hard drive after finishing, is it the right resolution to print out?

Im learning how to use it, and i love using it, but if i develop then export the image which i have imported as a fine jpeg from my camera, will it be the right resolution to print out as a photograph or do i have to do anything else to the image. thanks

When you are configuring your export options in the export dialogue, you have the option to specify the size in pixels. If you are going to print to a certain dimension, first of all I suggest that you crop the image to that aspect ratio. Then, export an image that will be big enough to support that print size. If the image has enough pixels the PPI setting is meaningless (actually, it's meaningless anyway as far as printing is concerned). For example, assume you want to order or print an image that is 16 and 20 inches at 240 PPI. Here are the steps I would follow.
1. Crop the image using the 4 x 5 - 8 x 10 aspect ratio setting.
2. In the export options specify in the image sizing options, choose long edge 4800 pixels (20"x240 PPI).
3. You can change the PPI setting to 240 if you want, it isn't going to matter.
4. Set any other printing options as required, then export the image.

HT3529 easiest way to print out my text messages from one person

I would love to know the easiest way to print out my text messages from one person, how can I do that?
I just did the last IOS updated, I'm not sure the number after it

Printing from the iPhone either requires an AirPrint compatible printer, or an app from the App Store. You would have to search to see if they are free or cost. Also, the printing of text messages would either require you to make a screen shot of the message and to print that as a photo, or you would need a 3rd party software on the computer to copy the entire message to the computer and print from there. There is no native print capability for entire message threads.

How can I print out the file directory?

Years ago, I could print out a list of files in a folder from the finder window. Is there now a workaround utility to do that? I don't want to use screen shots, as the directory is too long and would require several screen shots. thx.

http://hints.macworld.com/article.php?story=20060720174103802
or
http://reviews.cnet.com/8301-13727_7-20026446-263.html

How can I print out the graph I need only, without the controls and indicators?

I'm doing some programming in LABVIEW. I need to print out only the graph, without the buttons, controls, indicators. I tried to look for such a function in LABVIEW, but in vain. How can I achieve the result I expect in my programming?

Hi Fenny,
you should use the report generation functions to create a report containing your graph image and print it.
Take a look at the Sample Test Report.vi you find in the report examples of LV.
Just look at the part of the diagram where it is used Append Control Image to report.vi (in the center of the report functions chain); a graph reference is wired to the Ctrl reference input ( to create a reference of your graph right click on it and select create reference).
Let me know if you need more help,
Alberto

How can I print out the contents of my hardrive

I have a hardrive with about 200 video clips and need to print the titles for cross refrerencing. I was just going to "grab" screenshots but this will take about ten sheets of paper. How can I print out a list of all the files on the drive?

I tried this Finder drag method & discovered that it is very important to set the blank TextEdit document to plain text before the drag (from the format menu or with Cmd-shift-t). If you don't, TextEdit attempts to load the content of the files!
Once I discovered this, I tried the method with Find (Cmd-F) results & it works for that, too. This means that by choosing the right combination of search location(s) & search criteria, you can extend the method to filter the list to just about any files you want, which could be very handy.
For instance, set the "Kind" criteria to "QuickTime Movie" & location to "Computer" & you get a list of every QT movie. Or set the search location to the folder containing the movies of interest & you get all of them, including ones in subfolders. You could also use the 'date created' or other search criteria to filter the list to a specific subset of movies (or whatever).
If you need to do this often, you could create one or more 'Smart Folders' with the criteria preloaded for each search.
The only drawback I see for either Finder based method is the full path one. If you are getting results from just one or a few folders, Find & Replace can delete any of the path name fairly easily, but it becomes a chore if there are a lot of different ones. Some other text editor, like TexEdit Pro, that supports grep searches would be handy here, but since I'm not up to speed on grep, someone else will have to explain how to use it for this, if they want.

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

PO print out of delivery schedule

Hi,
Suppose I am generating a PO , in some cases I will be giving delivery schedule for some items in item details.
I want this to come in the print out.
But its not coming .
Please advise.
regards,

Hi
You can include logic with the help of Developre, If information is there in EKET for Purchase order ask him to include in print.
regards
Srinivas

How to print out wallet size photos on 6510 e-all-in-one series photosmart printer

want to print out wallet size photos (size 3 and a half x 2 and a half). I have windows XP and my printer is the photosmart 6510 e-all-in-one series

You will have to change the settings in the photo editing software and put 2 wallets on a 4x6 or 9 wallets on a full page. The photo tray will not take paper smaller than 4x6.
SandyBob
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP
1-800-474-6836

New Ink Cartridge but can not print out/copy any document.

I have HP Printer Deskjet 1050. I've just bought 1 x Original HP Ink Cartridge Colour Black No.61 that can be used as well for my HP Deskjet 1050 (because I could't get No.802 Black Cartridge). I have pulled out the empty one and pushed the new one in until I heard snap sound (I've followed as what is in the instruction poster). Before my old Ink was empty, I was able to print either black or colour. Now, after I've got new one pushed in, I couldn't print nothing, even the alignment page doesn't automatically print out after all cartridges are pushed in and cartridge door was closed. My Black Ink warning light is blinking all the time. I can scan to my computer/laptop but can not print it out or make copy from the printer. This printer is not compatible for my laptop with OS Windows 8.1 (64-bit), but I was able to use my printer for printing thru my laptop by using HP AiO Printer Remote. Please help?

Hi @KroebY,
Welcome to the HP support Forums! I see you have replaced the black cartridge on your HP Deskjet 1010, but it is not registering the new cartridge. You are unable to copy or print, you can make a scan. I notice you said your DJ 1010 was not compatible with the Windows 8.1 Operating system, there are full feature software and drivers available for your printer.
Let's start troubleshooting the print quality issues: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
Does this help, are you now able to print and make a copy? If yes, continue below:
Now, the software:
1. Unplug the USB if using a direct connection.
2. Remove the HP DJ 1010 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure all the DJ 1010 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your DJ 1010 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-117518-4&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if you are not able to print, and if the installation was successful. I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Print out in MB90 for GRN is not coming in English

Dear Friends,
While taking the print out in MB90 for GRN document, it is not coming in English.It is coming in some unreadableformat.
In MN21 I have mentioned the language as EN.
In the configuration of output type WE03 I have mentioned the language as EN intransaction code M706.
A reply will be highly appreaciated.
Regards
Rutabhadra Panda

hi
check whether the printer you installed is having the proper driver.

Material price is not coming in PO print out

Hi
I am facing a problem for a cost cenetr PO material price is not coming in print preview as welll as in print out for a particular PO what can be the problem.
regards,
zafar

Solution in this link Print priview of Purchase Order

How t print out selected values from a Jlist

hi iam trying to get the selected values from a list to print out as a string but iam getting ,Invalid cast from java.lang.Object[] to java.lang.String.is there any way to get the selected values t print ut as a string?? import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MultipleSelection2 extends JFrame {
private JList colorList, copyList;
private JButton copy;
private String colorNames[] =
{ "Black", "Blue", "Cyan", "Dark Gray", "Gray",
"Green", "Light Gray", "Magenta", "Orange", "Pink",
"Red", "White", "Yellow" };
public MultipleSelection2()
super( "Multiple Selection Lists" );
Container c = getContentPane();
c.setLayout( new FlowLayout() );
colorList = new JList( colorNames );
colorList.setVisibleRowCount( 5 );
colorList.setFixedCellHeight( 15 );
colorList.setSelectionMode(
ListSelectionModel.MULTIPLE_INTERVAL_SELECTION );
c.add( new JScrollPane( colorList ) );
// create copy button
copy = new JButton( "Copy >>>" );
copy.addActionListener(
new ActionListener() {
public void actionPerformed( ActionEvent e )
// place selected values in copyList
copyList.setListData(
colorList.getSelectedValues());
String s1 =(String)colorList.getSelectedValues();

Since the JList method 'getSelectedValues' returns an object array you'll need to iterate through the array and cast each object in the array to a string as you access them.
Object[] o = colorList.getSelectedValues();
for(int count=0,end=o.length; count<end; count++) {
String s = (String) o[count];
Hope that helps
Talden

Print out of LOV

Similar Messages

Maybe you are looking for