Print out of Shop Floor Papers in Default Language

Hi Folks,
User has a requirement to Print Shop Floor Papers in German language only irrespective of log on language.
He does not want to manually select the German language in IW3D, as it picks the log on language. He wants it to be set as German language (DE)
Please suggest.

Hi,
You can try to put DE as default login language for these users in SU01 , then by default printing will happen in DE by default ..
regards
pushpa

Similar Messages

PM: Printing Task List Attachments When printing Shop Floor Papers

Hi,
We have PDF documents attached to our PM Task Lists. My requirement is to print out these PDF attachments when the shop floor papers (ie Maintenance Pick List) print. I am able to determine each of the files and their paths attached to the task list, but as of yet, I am unable to automatically print them. Can anyone point me in the right direction?
Also note that using OLE to print the attachments seperately is not an option - The reason for this is that the shop floor papers would go to the SAP Spooler and the attachments would go to the network print server.
Thanks!
Scott

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

Creating single spool request for printing all shop floor papers

Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.

In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan

CN22 - Print Shop Floor Papers for Network Orders

Hi All,
We are printing shop floor papers for network orders - the printers are setup, configuration is working fine.
However, there is a sporadic error: when we select "Print" and then "Save" in CN22, the system pops up a window with the list of all network activities. However, for some reason, the first time this is done, only a few network activities appear on the list. If we close the pop up, then select "Print" and then "Save" again, the whole list appears. Has anyone encountered this before? I looked through OSS, but couldn't tell if any of the notes would be applicable to resolve the issue.

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

Printing of shop floor papers

hi guys,
very good morning,
plz explain in details the setting for printing shop floor papers with header and components with goods issue slip and confirmations slips,
thanks in advance,
Mohan

In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print prig -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controler-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
do this setting and then create Prod order/GI/Confirm and print
come back if required.

Print-out of shopping carts - add additional informations

Hi SRM-experts,
one simple question. Is it possible without modification to add in the print-out of the shopping cart additional informations such as the purchase order number. Is there a possibility to customize that function ? Thanks for yours replies.
AW

Hello,
This will need small enhancement in the smatform. You will find it easy.
Use T-Code SMARTFORMS and copy the standard smartform for SC layout "BBP_SC" and create a Z-one and use that by implementing the BADI BBP_CHANGE_SF_SC.
You can get the PO value from the table BBP_PDBEI.
Hope this solves the issue.
Thanks
Ashu

Development of shop floor papers in Smartforms?

Hello,
To develop shop floor papares I am using standard for PSFC_STD_LAYOUT and print program PSFCOBJL for output type LG01. Is it possible to make the customization using Smartforms vs. SAPScript. In the configuration, I do not see any field which will accept Smartform object.

Hello,
Thank you for your reply.
To clarify :
For LG01 output type.
In OPK8, under Reference order types> Print program>I added the driver Smartforms.
Under Reference order types>Forms>LG01 type --> it still reads as PSFC_STD_LAYOUT. Do I need to keep this entry at all?
In your example for setting user/plant settings you are calling the same form. Would in reality they will be different forms for each plan?
read table caufvd_tab index 1.
case caufvd_tab-werks.
when '7200'.
i_formname = 'ZSF_OBJECT_LIST1'.
when '9200'.
i_formname = 'ZSF_OBJECT_LIST2'.
when others.
i_formname = 'ZSF_OBJECT_LIST3'.
endcase.
Thanks you so much in advance.

Printing shop floor papers

Can anybody explain me how to see the print preview of production Order, Goods receipt (for MB31 transaction), Confirmation slip in Production Planning?

Hello Srinivas,
One of the way I could think of is setting the print mode as 'background processing' and the checking the print preview in spool request (Tcode : SP01).
Cheers
K

Shop floor paper printing

Hi Team,
I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
How to use this transaction to print shop floor papers as per our requirement?
I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
I am beginner to use this transaction. So your valuable guidenace required.
Thanks
psk

Hi chandan
Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
Regards
J . Saravan

Printing Shop floor documents

Hello Experts,
Is it possible to print the shop floor documents in production order status CRTD ?
If yes what are the settings to be done to get printing before releasing the order?
Regards,
Jejesh
Edited by: jejesh yal on Jan 27, 2009 6:47 AM

Hi,
As per Standard SAP Practice, It is not possible to print shop floor papers befere release of Production Order i.e. It must have status REL and not CRTD.
You need to maintain following settings for Printing Shop Floor Papers :
In OPK8
Name of the list - LG01, LG03, LK02, LV02
Spool parameters - User and plant = *
Reference operation - type - *, ref order = your order type
Forms -
LG01 - PSFC_OBJECT-LIST
LG03 - PSFC_ZUGL-LIST
LK02 - PSFC_GOOD-ISS-SL
LV02 - PSFC_CONF-TICKET
Print Programme -
LG01 - PPPROBJU
LG03 - PPPRZUGL
LK02 - PPPRWARS
LV02 - PPPRRUEC
List control for transaction
ref order type, plant, MRP controller-*
transaction codes - CO01, CO02, CO03, CO04, CO05, CO07
Flow control for transaction - all are online
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Jan 27, 2009 6:55 AM

Print out confirmation after entering confirmation in CO11n

Hello,
we need to automatically print out an confirmation slip or some kind of document that shows the amount of confirmed materials every time we have confirmed operation 0150 (Co11n) which is always our last production order operation.
Is there a way to do that?
Thanks
Anne

Hi,
Inorder to get the print of any shop floor control papers you to configure the same in SPRO : Tcode : OPK8 against the user and Plant.
If you want to have your specific layout then you need to create a FORM and Assign the same here agianst the Ref Ord , Plant, List, Output devics, SAP Script Form.
You can even give the printer Specification here, which can be assigned to Plant., MRP COntroller and List combination
If you want to restrict at the transaction level it is possible to do here.
Hope this will help you.
regards
radhak mk

What is shop floor paper ?

Hi,
Can someone explain in simple statement what is meant by a Shop floor paper in PP module ? An abaper is expected to change its layout and users can print it. Which programs are involved in sapscript ? What kind of changes are normally expected in the shop floor layout ?Thru which transaction I can print and verify the shop floor papers (like PO thru ME21N).
Would highly appreciate if u can answer straight rather than sending me links.
thanks

http://www.sap.com/industries/chemicals/pdf/BWP_SB_Manufacturing_Intelligence_Dashboards.pdf
http://www.honeycombconnect.com/downloads/PILS/OTE/13_12_06WhitePaper.pdf
Regards.

GR slip print-out & automatic default for the print tick

Hi,
I have followed the steps as outlined below for the solution and unfortunately the GRN document do not print as anticipated. I was wondering if the non-assignment of the MM or FI Program might be the cause? Please advice if I had missed something to allow this to print immediately.
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
Edited by: JML Nkgapele on Dec 1, 2008 11:10 AM

Your answer did help but still expriencing challanges with the following:
Output Types
-Print Parameters options are as follows
    >Plant/Storage location
    >Plant/Storage location/User group
    >User exit
   >User parameters
   >User
Please advice which of the above is appropriate?
-Should there be a program reflected on change output field for General data screen?
Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

Print outs have thin border when -default-background-color is set

Hey everyone. In my application the print out have this very thin border. The -default-background-color is set to #333333 (dark grey) and this is the problem. When I set the color to #FFFFFF (white), the thin borders go away.
When I set the default-backgroun-color to #FFFFFF, my loading screen is white. I don't want that.
Does anyone know how I can have my loading screen with a #333333, but not have the thin border lines around my print outs? Setting the border properties on the printed component doesn't work. The problem is with the background color.
Thanks for reading.
Tom

Still hacking away at this problem.
I thought I had the fix until I deployed the AIR application. Setting the -default-background-color to white worked fine when running from flex builder, but when I installed the application. The "borders" are still showing.
Has anyone had any experience with this? I'm printing Point of Sale receipts and they look like crap with these lines around them. On top of this, some printers print differently. The HPs print a border around the whole component. The Brother printers just print the left and right. One of my customer's printers just prints the bottom and right borders.

Shop floor Printing

I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
But when i make production order with same material , order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
I get message After the next update the order will be printed.

In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
But for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

Print out of Shop Floor Papers in Default Language

Similar Messages

Maybe you are looking for