Print over Internet using hp software and not email?
With eprint by sending an email to my printer (HP photosmart B110a) it is not possible to change any printsettings. Therfore, is it possible to print to my printer using just the normal software from HP, over the internet?
Thanks in advance
The printer should connect through your router to your home network and be seen by PCs on the network. The post HERE may offer more help in setting it up properly.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**
Similar Messages
-
Printing over internet from mobile network and windows
Hello. I have two kids living with their mother half of the time. They often needs to print things for their studies. How can I set up my print-server so they can print from their mothers computer. It's a win xp machine with mobile network. I have the printer shared with samba and I'm running an Apache server with a DynDNS IP-adress.
if everything (samba) is configured correctly, the printer should just show up on the network and can be added from the control panel->add printers wizard. you will probably have to install the printer drivers on the client (your kids) computers, which if you don't have the disk are normally available from the manufacturers website.
Last edited by Cyrusm (2010-09-13 17:52:42) -
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.
System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓ -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?
bzb888 wrote:
I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
See info in this thread on setting this up.
https://discussions.apple.com/thread/4817218?tstart=30
I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC. -
i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file? -
Difference between Share Disks over WAN vs. over Internet using Bonjour?
I would like to find out the Difference between selecting the "Share Disks over WAN" option only vs also selecting the additional "Share disks over Internet using Bonjour" option. Any info is greatly appreciated! Thanks!
you can access drives plugged into your AirPort extreme base station from outside the network by typing in the IP address of the modem/base station in the "Connect to Server" dialogue on the Finders "Go" menu (or press Command+K when in Finder). You can get the base station IP by opening the AirPort Utility from your utilities folder, and click "manual setup" at the very bottom of the summary tab should be the IP address given the base by your modem.
As long as you have "Share Disks over WAN enabled" when you connect using the IP from another location you will be prompted to authenticate to the AirPort Base station and if authentication is successful you will be prompted to mount a disk (the disk plugged into your AirPort base station should be the only available disk to mount).
Keep in mind you must give out the Base Station password unless you allow guest connections to the disk. -
My "notes" made on phone disappear on charging phone using apple computer and not found on iCloud either...what setting do I need to adjust?
You got it.
Notes - if notes are created in icloud notes (you may have multiple notes accounts) - icloud notes and only icloud are synced over all your devices and icloud server, so if you want to see those on the server you can go and manage (edit) on www.icloud.com.
Since notes synchronize by using same IMAP email server - turning them "ON" will prompt you to create mail address.
To add to that you do not have 10.8 that has it's own notes app, so your notes go to Notes folder in your icloud/me/mac mail and synched by your mail server. -
I'm a new to recursion. Can anyone tell me how to changes the method writeNums(int i) so it prints 1, 2, 3, 4, 5 and not 1, 2, 3, 4, 5, ?
Thanks.
public class Ex2writeNums
public static void main(String[] args)
writeNums(5);
private static void writeNums(int i)
if(i<0)
throw new IllegalArgumentException("negative number");
else if(i==0)
//base case
System.out.println();
else
// recursive case
writeNums(i-1);
System.out.print(i+", ");
}baudits wrote:
my code must be generic so i can use it for i=10 etc. So I can not write code like this:
if(i != 5)System.out.print(i+", ");
else System.out.println(i);
Just add a second argument, limit, which specifies how high you must count. Your code becomes
if(i != limit)System.out.print(i+", ");
else System.out.println(i);There are many ways to do this. You now have at least three. Pick one.
{? -
Can I "uncheck" songs in my iTunes while using iTunes Match? I want to use my shuffle and not hear every song in my itunes. I use a MacBook Pro, iphone 4S and an ipad.
I know of no way to do this.
Itunes ringtones are for iphones. -
How may I print out a picture from paper and not the photo tray?
How may I print out a picture from paper and not the photo tray?
From paper? Do you have a digital image of it on your iPhone?
"Photo tray"? What do you mean here? The iPhone does not have a photo tray. Printers have trays. -
For the Attribute Movement type(BWA) we use Value " 201" and not "101" why?
Hello Experts,
We are in SRM 7.0 classic scenario,
For the Attribute Movement type(BWA) we use Value " 201" and not "101" and provide the Source syst(backend R/3)
Can you all plz help me understand what is the difference if use value "101" for the Attribute Movement type(BWA)
Also,can you all plz help me understand if we shd use value "101" or "201" for the Attribute Movement type(BWA) and under what scenario.
Any pointers will be highly appreciated.
Thanks & Regards,
RKSHi,
Movment type " 201 maintained for the Classic scenario only.
It is necessary to maintain the attribute if the default material group for a given user (or) sit is set to a backend logical system. The EBP system knows that if the user is set for backend procurement ,that there might be a possibility for a reservation to be generated therefore it checks to see that a value for this attribute is maintained. The BWA value should be defined for the as 201 preceeded by the logical system and a backslash.
101 should not be used. This isfor the Good receipt.
In the extended classic scenario when you do the confirmations in SRM the movement type 101 will be created in the
backend system (R/3 or ECC6.0)
Regards
Ganesh Kumar .G -
Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method. -
Re: Photosmart 5514; must you use setup cartridges and not standard 564 cartridges during setup?
Yes.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Maybe you are looking for
-
Can i transfer music from an old iPod to a new one
how can i transfer music from an old ipod to a new one
-
Hello everyone, Flash problems yet again I have created a product configurator which i need to remember a users choices when they return to the page. I know that this is probably a job for shared objects but i'm not sure how to go about it. I need th
-
Hp pavilion dv6 windows recovery problem
guys im new in windows i even dont know how to restore to the factory settings i did my laptop to factory reset but after pressing f11 there is a error comes up windows boot manager insert the windows CD then restart you laptop choose the language
-
I have an iMac running OS X 10.4.11 and I need to upgrade to OS X 10.5. Do I need to purchase Snow Leopard to do this? Any advice would be gratefully received thank you!
-
When calculation in query it set as amount digit setting and not make sense
Version: (Please provide the current version) 2005B Patch 35 Description of requirements: (Please provide a detailed description) Because Taiwan NTD currency has 0 digit as amount digit, we need to set amount as 0 digit but price as 4 digits. While w