PRINT PAGE NUMBERS WITH PHOTOSMART C6300 SERIES ON MAC LION

PAGE NUMBERS

Hi,
You have set this up from the applications, not from the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Printing Page Numbers With A Sub Report

    Hi, I have a Crystal Report (XI) that includes a subreport which is identical to the main report because I am actually making the report print 2 copies of the same report with different critera in the detail section only. On the main report I have a Page Header section which I am using the special field "PAGE N of M", so on all pages of the report it is printing this page number. I  My issue is listed below:
    First page of report                    "Fred's Place"                 Page 1 of  2 (Correct)
    Second page of report              "Fred's Place"                 Page 2 of  2 (Correct)
    Third page of report                   "Fred's Place"                 Page 3 of  2 (Not Correct)
    Fourth  page of report                "Fred's Place"                 Page 4 of  2 (Not Correct)
    The first/second page are printing correctly with data being pulled from the main report, but the third/fourth pages are not printing correctly with data pulled from the sub report. My question is how to get the third/fourth pages to print as follows:
    Third page of report                   "Fred's Place"                 Page 1 of  2 (Correct)
    Fourth  page of report                "Fred's Place"                 Page 2 of  2 (Correct)
    Thanks for your help
    Jim Dyer

    Jim,
    Try passing the total page count from the main report to the subreport via a shared variable. Then set up a counter formula in the fake PH of the subreport and convert the counter and the shared variable so that it reads page 1(counter) of 2(shared variable)
    You should also be able to suppress the extra pagenofms in the main report when pagenumber > totalpagecount

  • How to print a document with photosmart B Series

    I simply want to print a page from Word 13, i have clicked HP Printer B110 Series, it is ticked as my default.   I haven't been able to print since i got this lap top.    also it is switched on and ready. Previously it only printed to One Note. I did have a message from you to add Q8QY to the printer but i don't know where to put that. i plan on changing to Windows 10, i suppose that will upset everything again.

    I don't feel confident enough to do a recovery.

  • How to print page numbers in adobe form

    Hi,
    Can anybody tell me how to print page numbers in adobe form.
    Thanks in advance
    Chaitanya

    Hi,
    Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
    My requirement is to have the user control on current page. For Example:
    Example for a Invoice with 5 PO items (stands on 2 pages) :
    1st  page is the letter : no page number
    2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
    3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
    4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
    5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
    Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
    I have used the follwing java scripting:
    this.rawValue = wv_pages - xfa.layout.page(this)
    where wv_pages is total no of pages calculated from print program.
    Please help me in this regard with some formcal or java scripting conditions.
    Thank You,
    Regards,
    Naresh.

  • IBooks 2.1 and digital/print page numbers

    The iTunes store says of the upgrade to iBooks 2.1 that it can show page numbers that correspond to the printed edition of select titles.
    I've searched about but can find no detail on if or whether this applies to.ibooks format or more generically to .epub format.
    Any ideas?

    I'm guessing you're correct, though there is a method of correllating physical page numbers with documents in epub.  I'm hoping this isn't a fixed length only thing or an iBooks Author only thing.  For legal or educational books, having the ability to reference a specific page that's the same as it is in print is very important.  As a matter of fact legal citations often reference page numbers.
    So far Apple is doing a good job of providing a book reader that does more than novels, I hope the addition of page numbers is one of them.  Note I have tried the epub method, but I can't get it to work, so I'm not sure if I'm messing up with the coding or if this isn't supported.

  • Printing page numbers in smartform

    Hello all,
    we need to print page numbers as Page 1 of 10 etc..
    But I can not use SFSY-FORMPAGES because I print multiple documents.
    I need to know how many pages will be printed in advance.
    Every time a new document comes we have to start the count again.
    Have anyone come across this and solved it. Pls help.
    Useful answers are rewarded.
    thanks.

    hi
    try this
    Page&SFSY-PAGE& of &SFSY-FORMPAGES(3ZC)&
    don't forgot to write 3zc otherwise it will show '*' ones the page no will exceed 10.
    regards
    vijay
    reward points if helpfull

  • Why won't my printer print page numbers? The page numbers show up when I preview the document by don't print on the page.

    Why won't my printer print page numbers in a document? The page numbers show in print preview, but will not print on document.

    Perhaps you have set the margins so tight to the edge of the paper that you have gotten into the non-printing area for your printer. Most printers have a dead zone.
    What are your margin settings?
    Jerry

  • Adobe Reader - how to add page numbers with the free version?

    Hey guys,
    Imagine I've got a PDF file and I want to create a new one by selecting some pages out of it. I know this is simply possible by using the PDFcreator but I want to add page numbers. As far as I know this is not possible with the free version of Adobe unless I would add the page number on every single page by using a text box. I want to make different catalogs from the PDF so the page numbers are really necessary. Have you got any idea how to solve that issue? You know that's pretty much the only thing I need to add which means it's not worth buying the Pro version. Unfortunately I only got the PDF and I can't work on it e.g. with MS word before I export it. Do you know if there is a way to add page numbers with a free version? There might be an additional free software which allows that?
    Thanks for your support! 

    Thanks for your quick replies.
    I know how to add text page by page. But obviously it's hard to place the numbers on the very same position, is it?

  • Printing Page numbers in ALV grid with oops

    Hi ,
    I have a ALV grid display with OOPS , there are also fields in top of page and end of page that go along with the print. I want to print the page numbers also . If I give a variable and increment it along with every call to top of page , then if a second print is issued, the variable can not be cleared out. Is there any other way.
    Thank you .

    Regarding  ALV Grid  Control using OOPs concepts
    Please give me reward point if it is useful.
    Thanks
    Murali Poli

  • Printing page numbers in an ALV report with multiple grids

    Hi,
    I have developed a report using OO ALV GRID. The output is having multiple grids navigated using a menu button appended to the standard tool bar
    (Ref report: BCALV_GRID_07). On navigation, we are able to display specific titles when each grid is displayed.
    When we print those individual pages (the grids), we are able to print the page numbers and the title for the first grid but when we display the next grid and print, we are unable to initialise the page number
    and print specific title. The page numbers continues from the last printing.
    I am looking at identifying the grid when the print event - PRINT_TOP_OF_PAGE is triggered so that a grid specific title can be printed and also page number initialised.
    Any suggestions is highly appreciated.
    Thanks.
    Mani.

    You cannot have one event for all the grids as you cannot identify for which grid the event has fired. You need to activate the event for each of the grid and handle the code independently.
    regards,
    Ravi
    Note - Please mark the helpful answers

  • Printing Page Numbers - From To

    Please can you help me.
    I am exporting a Crystal Report to PDF per customer through vb code.
    I need to print a maximum number of pages (that will fit in an envelope e.g. 20) and then continue printing his data into a second PDF where it left off.
    Therefore I am trying to print out the crystal report in my VB.NET code by specifying a "Page From" and a "Page To".  How can I do this??
    For example I want to be able to say Print out pages 1 to 20
    Then print out 21 to 40 but the page count in the 2nd report should say (1 to 20)
    Thanks
    Ric

    Don,
    Thanks for your help.
    Your solution to resetting page counts in the report might be part of a solution...
    First of all - How can I reset the page counts within a formula?
    However my problem is a little more complex...
    In my VB code, I output the Crystal Report as a PDF file.
    However in the example I gave, where the customer has 30 pages, I need to generate 2 PDF files.
    The first PDF will be called CUSTXYZ_1.PDF (contains pages 1 to 20).
    The second PDF will be called CUSTXYZ_2.PDF (contains pages 21 to 30 but numbered as 1 to 10).
    I still need to find a way to output one report as 2 PDFs with pages 1 to 20 in the first pdf
    followed by 21 to 30 in the 2nd PDF.
    Maybe in my vb code i need to find a way to say:
    Print Pages 1 to 20 in one PDF
    Then Print Pages 21 to 40 in the second PDF
    I am not sure how I can do that...
    Any more ideas??
    Ric

  • Texy edit - how to print page numbers only

    I wish the page numbers in TextEdit to be printed on my documents; in TextEdit preferences, when I select the option to number pages when printing, it also prints the date and document title. How can I have it only print the page numbers?

    It doesn't seem like you can just have the page numbers printed with TextEdit. When the help text appears in the preferences for printing the number of pages, it indicates it will also print the date and the title, so it is doing what it is designed to do, despite the misleading label for that item. Maybe another application (AppleWorks, BBEdit, Word?) can print just the page number.

  • TextEdit: how to print page numbers w/o Header

    I see the option to check "print footer and header" in the print dialog box. Anyone know how to just be able to print the page numbers in TextEdit (without the Headers on each page)?
    Thanks in advance for any help with this!

    TextEdit is a relatively simple program, with limited options. As such, I doubt the "print headers and footers" options are easily customizable. Other word processors have the ability to manage headers and footers separately. If you've got Pages, or Word, or the free alternatives such as OpenOffice/NeoOffice then you can set up your documents to print just header or footer info with only page numbers.

  • Printing page numbers in report

    hi,
    I want to print the page numbers in report in a format
    of PAGE 1 OF 10
       PAGE 2 OF 10....
    can anybody help me in this
    thanks in advance.
    neha.

    Hi Neha,
      Similar question was posted earlier by someone..
    It will help you.
           line-size 80
           line-count 65(1)
           no standard page heading.
    data: imara type table of mara with header line.
    selection-screen begin of block b1 with frame title text-001 .
    parameters: p_check type c.
    selection-screen end of block b1.
    start-of-selection.
      perform get_data.
      perform write_report.
    end-of-page.
      perform end_of_page.
    FORM GET_DATA
    form get_data.
      select * into corresponding fields of table imara
            from mara up to 315 rows.
    endform.
    FORM WRITE_REPORT
    form write_report.
      data: xpage(4) type c.
      data: lines_left type i.
      loop at imara.
        write:/ imara-matnr.
        at last.
          if sy-linno < 64.
            lines_left = ( sy-linct - sy-linno ) - 1.
              skip lines_left.
              sy-pagno = sy-pagno - 1.
          elseif sy-linno = 64.
          skip 1.
           sy-pagno = sy-pagno - 1.
          endif.
        endat.
      endloop.
      write sy-pagno to xpage left-justified.
      do sy-pagno times.
        read line 65 of page sy-index.
        replace '****' with xpage into sy-lisel.
        modify current line.
      enddo.
    endform.
    Form  end_of_page
    form end_of_page.
      write:/32 'Test Program',
            at 62 'Page:', at 67 sy-pagno, 'of', '****'.
    endform.
    Regards,
    Sailaja.

  • TextEdit won't print page numbers.

    I have followed directions of choosing to print "headers and footers" in the print dialogue and the header is indeed printed but no page numbers. This happens with any document I print.
    Is there a solution?
    Thanks,
    Richard

    Since it works in the new account, then there's something corrupted/conflicting in the original one. While logged into the newly created admin account, backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
    See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

Maybe you are looking for

  • How many times can a charger be plugged into an iPhone?

    I was at the Apple Store yesterday and the woman that worked there told me that you can only plug your charger into your phone a certain amount of times. She never got around to telling me how many times it was, so I am just curious becuase now I'm a

  • Radiobutton equivalent in a schema

    I have 2 radio buttons in my form with values "Day" and "Night". I would like to prefill these radio buttons from an XML/database using a schema. Can someone tell me 1) How would I design the schema to accomodate the radio buttons ? 2) Out of the two

  • Problem in using aggregate functions inside case statement

    Hi All, I am facing problem while using aggregate functions inside case statement. CASE WHEN PSTYPE='S' THEN MAX(DECODE(POS.PBS,1,ABS(POS.PPRTQ),0)) ELSE SUM(DECODE(POS.PBS,1,ABS(POS.PPRTQ),0)) END, how can I achieve above requirement ? Con anyone he

  • I cant find imovie and iphoto

    I uploaded my air to Mavericks two weeks ago. I just realized that I am missing imovie and iphoto!! Did they be moved to other place or this is a huge bug???? Rita

  • Won't Print Color (Newbie)

    I have an AI CS6 file (CMYK) which I can not print in color.  When I save as a PDF file and print it using Reader it prints out in color.  My other AI files print in color without a problem. Sorry for the lack of info.  I would appreciate any help. R