Print pdf image (business card) not at center of page

I want to be able to move an image of a business card on a 8
x 11 sheet .pdf similar to an Illustrator .ai file.

Thank you for your post. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Similar Messages

I need a tutorial on printing double sided business cards through adobe illustrator

does anyone have any suggestions on where to find a tutorial on printing double sided business cards through adobe illustrator?

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

PIXMA MG6320 Double Sided Business Cards Not Printing Correctly

I just set up and used the PIXMA MG6320 for the first time. Prints regular prints fine but I tried to use inkjet double sided business cards and something when very wrong. The paper seems the same on both sides. The brand is Avery. Side one prints great but side two prints as if there is a plastic finish on the paper. I left the ink to dry over night and it never did. Also, the image is terrible when it does print. As if its on a slippy surface but the paper seems the same flat finsih on both sides. Its not about double sided printing becasue when I sent side 2 through first, it did the same thing.

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

Printer prints some PDF objects as filled (but shows borders only in preview). Print as image helps, but not for all computers. Acrobat X Pro, OCE printer.

We create PDF from Autocad using Adobe PDF printer. When printing that PDF file to OCE printer, some drawing objects are printed as filled (but Acrobat shows correctly - border only). If I open the PDF with Internet browser, I can see those objects as filled as well. If I print the PDF as image from some, not all computers - it prints ok, not filled.
Please help.

File>Print
- Look under the Properties and Advanced buttons

How do I get the images/business card to complete the 10 card spaces

I complete making my business card on the first space/template but it does not complete filling the new card info. How do I complete the page of business cards?

Hi hd,
EDIT: OOPS! The instructions below assumed you were using the Business Card Template in Pages '09. Seing as you've posted this question in the AppleWorks discussion area, it's more likely that you are using the Database module in AppleWorks. Instructions for that application are in my second post below.
B
Read all steps below before starting, then go through the steps in sequence.
Select all of the elements of the one you have created. Go Arrange > Group.
Copy.
Press command-A to select all.
Command-click on the completed card to deselect it.
With everything except the original card selected, press delete to clear the form.
Paste (to paste the copy you have made of the original card).
(If you did not copy the original:
(Select the original. Press command-D to duplicate it.)
Use the mouse and the alignment guides to position the duplicate in the top right space on the template. (This assumes the original is in the top left space.)
Move the mouse pointer to the original, then command-click to add it to the selection.
Go Arrange > Group
Press command-D four times to create four more pairs of cards.
Use the mouse to drag the last-created pair to the bottom row of the template, and left to align with the top pair (indicated by the appearance of alignment guides).
Go Arrange > Align > Left
Go Arrange > Distribute Objects > Vertical.
Each card should now be in the center of its space. If not, select each individually and perform minor adjestments using the mouse and/or the arrow keys.
NOTE: Depending on the template, you may see a set of small x s when you Select All. These are the handles of a large, locked object. Command-click on the object to remove it from the selection before attempting the last two steps in the list.
Regards,
Barry

Exporting document as print PDF having custom Links not raising "CreateResourceStream" on custom Links Resource Handler.

Print PDF export not raising any callBack(CanCreateResourceStream, CreateResourceStream) on my custom resource handler (ILinkresourceHandler) this lead to Low resolution images on PDF on other hand all Other export like Interactive PDF, PNG, JPEG even Print are working fine .CustomDataLink Sample also have same problem .

Print PDF Export & IDML Export work on background thread means only model plugin get callbacks related to PDF export but my LinkResourceHandle Implemented in UI Plugin so I fix my problem by moving LinkResourceHandler implementation to new model plugin.if you want it to be in UI pligon only than put an empty text file name "DisableAsyncExport" in macos content folder inside app on mac, this will disable background export of PDF & IDML .

Printing 2 sided business cards

purchased C4780 specifically to print biz cards-using Avery cards. there are 2 sides to the card, but am printing 1 side at a time.,but the printer does not start at the same spot-does not matter which side I do first--does not matter if I select borderless or not..1 side will always start at the edge of the sheet-so most of the info ends up mis-aligned to the other side--have gone thru entire list of "feed" fixes/solutions-spent hrs online with support--anyone got an idea?

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

Printing on a Business Card

I realize I am in the wrong area to ask this question, but I am currently in a bind. I have no "tech-y" friend who can solve all my computer problems and the only place I know where to post questions is here on apple.com. If anyone knows any other message boards or chat rooms that could help with little problems PLEASE let me know.
Here is my question:
I have blank business cards pre-cut and am trying to print on them. My printer is telling me they are too small and will not accept them to print my design on them. Any suggestions? i currently use both an HP Deskjet 3900 and an HP Photosmart 4400 series printers.

Any suggestions?
Get some that aren't precut. 2 X 3 1/2 is too small for any printer.

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

Printing PDF's In Preview Not Working Well

I use a ScanSnap scanner to scan several hundred page documents and then print them in whole or in part using Preview. There used to be an option to have multiple "images" (if I remember the phrasing correctly) per page (2, 4, 8, 16 etc) but now that option has become "copies". When it was "images", it would place successive pages of the PDF, now, it simply duplicates the PDF pages onto the actual printed pages. For me, that meant that I could use two sided printing and print essentially 4 pages of the PDF file on only physical sheet of paper.
Now, before someone mentions it, there is an option under the "layout" section of number of pages per sheet, and this does what I want, but with huge margins compared to the other method.
Also, if anyone is worried that the whole idea of the Scnsnap was to go paperless; I have an excellent reason for needing to scan these documents and then print selected sections as I have described.

I have the same problem where preview squishes the lines together. It seems it is on 1/2 spacing instead of 1 line spacing. To correct this I have to double space to get it to look single space. I created the fillable form in Acrobat X as multiline.
This first screenshot is text typed into the fillable form.
This is the result when I click out of the form - it returns squished.
I add returns and make the form entry double space.
Now the result with double spacing in the filliable space makes it single space.
Very annoying!

How to automatically ensure printing pdf in safari does not crop content

I realized today that printing and saving as pdf in safari has been cropping my content. I dont know when this change occured or why, but at some point in time, content I've saved from safari by printing and saving as pdf has cropped the pages.
Is there a way to make sure that printing in safari selects a page size that automatically does NOT crop the content. As it stands now it automatically selects US paper size and that crops all my bank statements. I can put in a custom size buts its really inconcenient to have to do that every time. And every time, it reverts back to US paper. This was never a problem for me in the past and I'm not sure whats changed.
thanks

Just to update, even if I select a custom size in print settings for the computer, safari automatically goes to US paper. Even if I select to scale content to fit, it still crops the content.
I've also trashed Library/Preferences/com.apple.print.PrintingPrefs.plist

Printing PDF doesnt show added note

I have a user with Adobe Acrobat 6.0 and when she adds a textbox to a pdf file and prints it, the added text does not show. Is there a certain way to add notes/textboxes and have it show up on a printed paper? Thanks

The note is a type of markup,, so one needs to select 'docounte and markups' for the "Comments and Forms" oprtions on the print UI.
One can also edit the applications preferences and undet the 'comments' select the "Print notes and comments'.

Why image background is not at center desktop when click fullsceen button

hi. I'm building fullscreen button. and when i click to run fullscreen image it in left not center.
background image in application i make it by skinclass. it run normal and at center desktop when run but when click fullsreen it not
and fullscreen:
    private function init():void {
                fullScreenState = stage.displayState;
            private function btn_click(evt:MouseEvent):void {
                if (btn.selected) {
                    fullScreenState = StageDisplayState.FULL_SCREEN;
                } else     {
                    fullScreenState = StageDisplayState.NORMAL;
                try {
                    stage.displayState = fullScreenState;
                } catch (any:*) {
and button:
<s:ToggleButton id="btn"
                        click="btn_click(event);"
                        width.trangchu="121" x.trangchu="401" y.trangchu="-27" height.trangchu="95" />
Can u help me please?

I don't know how to fix your problem, but just wanted to say
that I wholeheartedly agree with kglad.
I am working on a project now that needs to have a custom
scroll bar that I can incorporate with dynamic text fields that
need to be scrolled.
Four days ago, I decided to save some time and just use and
modify the UIScrollBar Component.
ALL SORTS OF LITTLE BUGS EVERYWERE.
After messing with it for an entire weekend, I decided to
just bite the bullet and write my own scrollbar class.
Here is what happened for me when I decided to write my own
class.
own class --------------------vs------------------- component
took 4 hours ------------------------- took 3 days until quit
3 mc's in the library to modify if you want
------------------------ I don't even want to count the
to change the look --------------------------- amout of mcs u
gotta change
can change width of scrollbar on the fly -------------------
can't change width of a vertical sb
added an autoscroll function that starts
------------------------------ no such function
scrolling down slowly upon page load
increase file size by a few kilobytes ---------------------
increase filesize by like 30kb
NO BUGS -------------------- BUGS EVERYWERE.
Lesson I had to learn: Components waste more time than I did
on my World of Warcraft phase.
They are good for designers who have limited scripting
knowledge, just be aware that they can be very buggy. There are
lots of third party developers that sell menu components and the
like. You may want to look in that direction if you absolutely must
use components and the included ones aren't working for you.

Rollover images with buttons not working on subsequent pages.

I'm trying to create an interactive PDF wherein images "pop-up" when the cursor rolls over a trigger button. I've successfully employed the Buttons feature to create three such images on one page. However, on a subsequent page images will not appear upon trigger rollover. All three work perfectly on that first page, and I'm using the same procedure on all images/buttons. I checked to see if something was going on in the Tab Order, but each page has its own Tab Order, so I don't know about that. Working in CS6 for Mac.

In my InDesign file, I have been very meticulous to link each trigger button with the image button and to assign the appropriate actions to the trigger button. Based on what I have learned, when doing this with InDesign, you make both the trigger object--whether an image or, in my case, a box at 0% transparency that covers text--and the object to be shown/hidden into buttons. Maybe that's where I am getting this wrong? Still, that obviously works for some instances and not for others, so this is confounding.
I do see what you mean about manually adjusting the objects in Acrobat, and that's a trick for adjusting one or two things, but it's tedious to do that with many links in a document that I'm working on. Given the number of "pop-ups" that I want to create for my completed document, the solution has to take place in InDesign.
Additionally, I have tried just about every permutation of tab orders in the Object-->Interactive-->Set Tab Order feature in InDesign. All to no avail.
I thank you very much for your time and efforts on this, Gilad. And I apologize for my lack of facility with forum standards (e.g. "How do I post a file, duh?"). Long time reader, first time post-er, haha.

Collection image (album art) not appearing on provider page

The album art appears OK on the collection page but not on provider page:
http://www.ucl.ac.uk/ralph/Untitled-2.jpg
Image is a png pulled from provider-hosted rss feed, but it also failed with a jpg.
RSS feed: http://itunes.ucl.ac.uk/rss-feeds/public-lectures/incest-folk-audio/rss
Apple folks: Any ideas?
Thanks

Herts is having the same issue: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=398994343 displays fine on the collection page but not on the Homepage. I noticed this with another one last week but that fixed itself within 24hrs. This collection was added on Monday but is still not displaying an image on the Homepage.
Also 2 additional items were added to the Philosophy collection on Monday and are still not showing on the live site. They show up in preview mode though.
Feed URL: http://itunesu.herts.ac.uk/feeds/UnderstandingPhilosophy.xml
iTunes URL: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=386952605

Print pdf image (business card) not at center of page

Similar Messages

Maybe you are looking for