Print presets not keeping settings after saved?

I've created a preset to have the object printed to Scale at 100%, but none of the settings stick. I turned off Auto Rotate, set it to Landscape, and set it to Scale-100%, but after every print job it goes back to Auto Rotate: On, Portrait, and Scale to Fit: Print Entire Image.
Scale is the important one here, the others were just tests to see if any settings I change are staying, however none of them seem to. Any ideas? This is on a 2.66GHz Intel Core2Duo running 10.6.8.
Thanks in advance for any help, this is really frustrating!

Yes, it works fine when I hit Print that first time, it's when I go BACK to do more using what should be a preset that the settings aren't sticking. If I make a preset, I shouldn't have to change the settings every single time, since that sort of negates the point of a preset.

Similar Messages

FontBook does not keep settings after computer restart

I have thousands of fonts on my HD folder, and a standards set of System and Library fonts. Any time I disactivate and acivate certain font families, my FontBook keeps these settings (for activation and disactivation) ONLY UNTILL next computer restart cycle.
After restart, when I load my FontBook application to check my fonts settings (for to make the fonts I set previously working again), Fontbook starts activating all my thousands fonts in my custom library, taking munites of waiting for a spinning wheel. I also do not see (off) signs for fonts diactivated during previous session. I see lots of duplicate font warning because Font Book is auto-activate all.
Consiquently, I have to reppeat all the process of activation/disactivation and to help my computer working with less fonts load and resolve duplicates.
So, why Font Book does not keep setting for fonts activation/disactivation in a custom library after computer restart?

"*Opened Firefox, which was recently updated to some 3.6 something version. *When opened, it offered to download new vers. 4,* which I initiated. "
Impossible! FF v4 system requirements are Leopard & Snow Leopard. Your system info confirms that you are still running an outdated version Tiger - Mac Book Pro *Mac OS X (10.4.5)*
If that information is incorrect, please correct & provide your current OS in the "My Settings" panel.----->
"(what looked strange that the request was in English, German and some other 2 languages"
What you experienced was a kernel panic. Disconnect all devices from your computer and try the suggestions mentioned in the following:
http://docs.info.apple.com/article.html?artnum=106805 *Mac OS X: "Broken folder" icon, prohibitory sign, or +_kernel panic_+ when computer starts*
User Tips: Kernel Panics

Firefox (ver.7, ver11) do not keep settings after its restarting

All my settings from menu options>options disappear after restarting FireFox. But primarily it was not so! The complete reinstallation (with uninstallation) do not remove the problem.

see [https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save How to fix preferences that won't save]
http://kb.mozillazine.org/Preferences_not_saved
but keep in mind, version 7 of firefox is too old and unsupported, try the latest version
http://www.mozilla.org/en-US/firefox/13.0.1/system-requirements/
http://www.mozilla.org/en-US/firefox/all.html
thank you

Print presets not saving

I never got very good results from printing in Aperture 2, but Aperture 3 seems to have fixed most of my outstanding issues. So I was trying to set up some print presets. Unfortunately, I create a new preset, select Save Preset from the gear menu and it disappears the next time I start Aperture. I can't even seem to find what file Aperture might be storing these presets in, Library > Application Support > Aperture has a PrintPresets.plist file, but I don't see any of the presets in my print dialog in there, and none of those files contain my preset.
Is anyone else seeing this? Anything I can try to resolve this? I'm on 10.6.2 with an Epson 3800 if that matters.
Thanks.

OK, if the permissions thing doesn't work I do have another fix....if you don't mind 'going under the hood'.
Your plist thing gave me an idea, so what I did, having confirmed that my file, like yours, did not contain any of my saved presets, was make my own in plist. If you decide to try this please make a good copy of your plist file and keep it somewhere safe before you start, and please understand you do this at your own risk. Having scared you sufficiently it is actually quite easy. Open the PrintPresets.plist file, choose one of the existing presets (they are labelled as items) that is closest to the one you wish to create and copy it. Then click plist to navigate back one level and then paste in your new preset. Rename it (user name) and save, then reopen AP3 to confirm your new preset does in fact show up. Assuming it does then you can go back into PrintPreset.plist and tweak the settings to suit. The one thing that tripped me up briefly was the fact that measurements in the plist file are imperial yet in my copy of AP3 I am using metric, simple enough to convert though.
Again, this is at your own risk, but it worked a treat for me and now I can strart to print with my own presets in AP3. Wish I'd thought of it earlier.
Good luck if you decide to have a go
Take care
FlatE

Printer Presets Not Saving

It has been discussed on here before without any fixes coming from Apple...
Essentially the problem is that I'm trying to set one preset for printing all of my documents and another preset that allows me to quickly print photos from Imagebrowser (a Canon program). The problem is that when you think you have saved a preset you really haven't. It just continues to use whatever settings were last used and often a bunch of work has to go in to getting things to print correctly. I know this worked correctly under Tiger. We're at 10.5.4 and Apple still hasn't sorted this out. Does anyone know of a third-party app or Applescripts that could be used to rectify this problem.
If I missed it, has there been a solution to this problem?

This issue has been a problem for me since installing Leopard 10.5 upon its release. The fix for me was realizing that the feature settings of the various printers were reset. I had to go into each of the information panels of the print queues and enable Duplex printing, for instance. I do not know why this is not occurring through an automatic query process between the Printer Setup and the Printer itself.
A serious non-feature I noticed is that a lack of one feature in the Default Printer causes the Preset to lose that feature within an application context. That is, having the Default Printer without Duplex, while having selected a saved Duplex preset will cause the checkbox to be unset and the duplex feature to become unavailable in that preset and application, even after selecting an alternate printer with the Duplex feature designated available. Setting the default printer to the alternate having Duplex and restarting the application (like Preview) causes the Print dialog with Duplex preset to have the checkbox set.
I checked to see if the preset plist is being overwritten when selecting alternate printers, and it is not.
It seems that this could be a behavior exhibited by in the Apple Print dialog. It seems to read the Preset one time, perhaps at the first Print command. From there it seems to alter the Preset information, based on the default printer feature set, losing Preset features forever more within that application context. If this is the case, I suggest that Apple maintain a original copy of the Preset plist within the application and merge that upon each alternate printer selection.
For me, the workaround is to manually designate all of my printers to have Duplex capability.
I hope you find this useful.
Sincerely,
Robert Entriken

Print preset defaults to (custom) after change in qty

Sorry. It's complicate to describe in one line (and even harder to search for an answer).
I'm using CS4 on a desktop PC.
When I change to my special printer presets, the quantity to print default is 1. Of course.
When I change the quantity to a number other than one... the print preset returns to (custom), which is the default.
and alternately
If I start by changing the print quantity, followed by changing the print preset, the quantity defaults back to 1.
I need to print the same document multiple times, and it's rather frustrating...
help?

The presets are extremely customized. It took me an hour to set each one up. (there are three presets that I use on a regular basis). Yes, all the settings go back to the default and thus is not functional for my purposes.
File > Print Presets > <your preset> leads me to the exact same problem. When I change the quantity it returns to (custom)
Is there somewhere else I can look for troubleshooting information? I was at a complete loss for how to search for my strange problem...

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

Item category not change able after saving

Hi guys,
I have a problem (ECC 6.0).
After saving a sales order, I'm not able to change the item category for the added item after saving the document. It's some kind of service material (DIEN) to charge labour to the customer.
I found that if I maintain the MRP3 view with the strategy group 10, I'm able to change the category after saving. But as the MRP views are disabled for service materials (DIEN) and there's no need for MRP for service materials, I don't get rid of the problem.
Please help me to solve that problem.
Best Regards,
Florian

Normally If it is open sales order then you can able to change the item category provided manual item categories available in T Code - VOV4, if there are any subsequent documents are there then you are no longer to change the same.

Printer presets not working in OSX Mavericks

Hi Apple community,
since upgrading to OSX Mavericks, the system printing dialog doesn't change the pre-set printing presets after selecting one of them. I made a screencast to show what I mean.
This is what I already treid:
- Deleting printer
- Re-installation of printer
- Deleting all presets
- New setup of all presets
How can I fix this issue???
Thanks!

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.print.custompresets.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. If there are any other files in the same folder with a name beginning in "com.apple.print.custompresets", move those too.
Log out or restart the computer. Create a custom preset and test. If there's no change, quit again and put each item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the items you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Launch Zone will not save settings after powering off/on

Ok...noob here, but i just changed Zone 3: Read of the Launcher from Kindle to Zinio, but when I power off the unit (not put it to sleep) and turn it back on, Zone 3 of the launcher reverts back the Kindle app. Anyone have this happen? Am I missing a setting some place?
**FOLLOW UP**
Got off the phone with Lenovo support, their K1 does not revert back to the factory settings when they change one of the "zones" in the Launch Zone application. We even did a factory reset, made changes, turned off the K1, turned it back on and it still would not keep my changes. Their only recommendation is to take it back to Best Buy (where I bought it and see if some there can re-install the Launch Zone application as it apparently has a bug. So unles someone else has any ideas, looks like I am out of luck and have to return this puppy.
Mike

utlax18 wrote:
Since I have 801, I guess that is why my tablet did not get an update out of the box when I went to go update it? I saw people updating to 829, so I was perplexed why I could not get 829 when I was on 801, and naturally 801 being a lesser version number than 829 I was confused. Anyhow, do you have an ETA when the LLW fix will be in (in a week?) and can I simply get it OTA?
Thanks!
I can't give a release date in case we find something last minute and end up with a delay. I wouldn't be surprised to see it sometime next week, but I can't promise that will happen. Once it's released, you'll be able to get it via OTA.
As for the update to 0829, I imaged one of my tablets with the 0801_US manufacturing image and was able to update to 0829 without any issue. Can you give it another shot? When you do "check for new version" under System Updates, you will only get a message immediately if it doesn't find an update. If an update is found, the download will begin immediately, indicated by a little down arrow by the clock. You'll only be prompted to apply the update (or cancel) once the download is complete. It won't fix the LLW persistence issue (I tested that again, just for fun), but it will get you to a more stable image.
If you don't mind, give that a go and please let me know what happens.
Full disclosure: Lenovo issues my paychecks.

HP P1102w printer will not wake up after sleep (wireless setup, win8)

Bought this printer a month ago. I have no problem with both LAN +Wireless setup.
Windows8 OS
I noticed once the printer is not on (goes to sleep), it will not wake up by itself.
According to manual, if I send a print job, it should wake up by itself.
Currently, this is what I need to do.
I need to physically turn off and turn on the printer, wait for 10-15 seconds until the wifi blue light is solid (no blinking)
and then send my print job, and it will work
Just wondering whether HP has a solution to this, thanks
This question was solved.
View Solution.

Is HP ever going to fix / address this issue?
People Running the latest firmware - 20130703
And there is no option to disable Sleep mode. The max you can set it to is 1 hour.
The power physically / manually has to be powered back on, to establish IP connectivity.
This has been an issue for 2 years now!!! Come on what does it take to get an update?
Seriously?

Printing presets not working

I will set up, define, and save a printing preset only to see it gone the next time I need to use it. Anybody else? Any obvious fixes, or is it a matter of waiting for Apple to fix it?

Hello,
Thank you for your post.
Your issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because you are developing VB program, I suggest consulting your issue on Visual Basic forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vslanguages, you will get better support and solution there.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trouble shooting imac g3, printer will not load, even after a redownload OS

Certain things are not working, including the printer.
I had a power outage and recently downloaded digital camera software.
And first noticed printer is not working and the error message was,
( check printer connections)!
I had no changes there, so i tried to redownload the software.
software is there but is NOT recognized in the chooser.
Permissions are run and there is no problem.
Now I know It's time for a new imac, but for now i have to limp this one along.
When redownloading the OS from 8.6 to 10.3.9, the classic would not let me change the
extensions to mac OS all, for each upgrade?
So I 'am thinking some setting is wrong or somthing is fried?
But I desperately need my printer.
Maybe the printer is fried, has power and software is there?
Any help woud be appreciated.

"I had no changes there, so I tried to redownload the software. Software is there but is NOT recognized in the chooser."
Does this printer have pre-OS X drivers?
"When redownloading the OS from 8.6 to 10.3.9, the classic would not let me change the extensions to Mac OS all, for each upgrade?"
What do you mean "redownloading the OS from 8.6 to 10.3.9?" Classic requires at least OS 9.1 (preferably updated to OS 9.2.2), which is independent of OS 8.6. Panther (10.3.x) is a separate installation. Were you attempting to use the Extensions Manager, to solve an extensions problem? When using a third-party printer, it's sometimes necessary to disable these (3) Apple printer extensions (Desktop Printer Spooler, Desktop PrintMonitor, and PrintMonitor) to prevent conflicts with the printer's own drivers.

Develop presets have different effects after saving file as either .tif or .psd

When I open a raw .dng file in Photoshop and MAKE NO CHANGES and then save it (either .tif or .psd), the resulting photo appears to be identical to the original raw .dng file. HOWEVER when I then apply development presets (whether my own or Lightroom presets), the presets have a COMPLETELY DIFFERENT effect on the .tif or .psd file than the .dng file. More precisely: the .tif or .psd files have significantly more contrast, saturation and are significantly more exposed. And in fact, despite using the exact same preset, the histograms for each of the pics are different. In addition, the same preset on the .dng file treats colors differently than on the .tif or .psd file. After much experimenting and comparing of each development module and each individual slider, the sliders that seem to behave differently are Brightness, Contrast and Saturation. With each of these sliders, however, the difference in effect is only minimal and should not affect hue, but when applying a preset that affects hue, the actual change in hue is different for the .dng file vs the .tif. or .psd file. All of this even though all of the presets are the same. Whatsmore, applying Auto Tone on the two apparently identical files results in dramatically different affects: the .tif or .psd file is properly corrected, whereas the .dng file has its Brightness decreased and Contrast increased, i.e. the Auto Tone moves the sliders different for the .dng file than for the .tif or .psd file. Is there a solution to this problem?

I'm one of those who eventually migrated from PS to LR. I used to do a layered TIFF for every selected image. With 17-21MP raw files, that amounted to usually between 180-250MB files in addition to the raw. After completely changing my approach, for 99% of my work now I only work from the raw file, including printing / generating web JPEGS. This was really enabled by having the spotting and local editing at the raw file level. But pretty much no more TIFFs as working / final images, just raws with settings. Obviously different people have different requirements, but it's well worth looking into the switch in approach, even if you still end up using PS / Bridge / ACR.

Print dialog not remembering settings

I have a very simple saved setting for my Lexmark E332n printer that sets the paper feed to manual. The problem is that since upgrading to Leopard, the manual paper feed setting is not remembered. In fact I have tried deleting the saved setting, setting the paper feed to manual and then saving that... and watching manual feed be reset to Auto-Feed with no other intervention on my part. Saved print settings are a great feature. I hope Apple can fix this problem so that it again works as well it did in Tiger.
By the way, I downloaded and installed the latest drivers on the Lexmark web site, and I'm getting the same behavior before and after doing so.

Here is the link for providing feedback:
http://www.apple.com/feedback/macosx.html

Print presets not keeping settings after saved?

Similar Messages

Maybe you are looking for