Print Preview Chines Word layout Run

Hi All,
I did a smartform with displaying the chinese word, when i display the form in print preview all the wording is run and overlay. But when I print out from printer overall is ok without any layout problem .
Any ideas why the layout is run when displaying in print preview ?
Thanks

I think you have to pass the print parameter.
data : iprint type slis_print_alv.
iprint-no_change_print_params = 'X'.
now pass that to alv_grid display fm is_print parameter.
it may work.
regards
shiba dutta

Similar Messages

In ALV- Coulmns are jumbling in print preview and word doc.(irregular)

Hi Gurus,
In ALV, i am getting the output with proper column allignment. But when i click on print preview in the output, columns are jumbling (irregular pattern- not in proper allignment) and also i am pulling the output data in spool throgh PDF format, there also columns are coming irregular( jumbling).
I want to get the output data into word forma with proper column allignment.
Please suggest me to solve this issue.
Thanks,
Chiru.

Check whether in the field catalog COL_POS is filled properly,
a®

Cannot Display Chinese Word if pdf preview for PLD layout.

Hi,
I am facing a problem when user pdf preview the pld layout with chinese word, the content will be blank, it will not be displayed. Print preview work fine for chinese wording.
I had tried to change the font to every chinese character through the drop down list, but it still happen the same.
I had check the pdf version, it can display chinese wording that not from SAP.
I had search in the community, but none of them meet my requirement, as most of them happen in crystal report.
Can anyone help? Anyone experience before?
Another thing is, why in the General setting > path, there is no setup for pdf?
Thanks

Hi,
Please refer SAP note for solution:
1406074 - Chinese / Japanese Characters not exported to PDF
Thanks & Regards,
Nagarajan

Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

Printer Driver Support for Computers Running Windows 8 Release Preview

Printer driver support for computers running Windows 8 Release Preview
HP is working to help customers have the best experience with HP printers connected to PCs running the final release of Windows 8. The pre-release time is a development period when HP develops and tests printer driver solutions. HP’s current plan is for Windows 8 compatible printers to be available when the new operating system is released to the public. HP is working with Microsoft to include drivers in the Windows 8 operating system for HP printers introduced in recent years.
There may be a variety of sources for a printer driver/solution for your HP printer on a computer running Windows 8 Release Preview.
inOS:
An in-Operating System (inOS) driver is a basic driver that is included within the operating system. You do not need to download or install any software from HP. Windows 8 Relase Preview contains several inOS drivers. If an inOS driver is available for your printer, you will have at least basic print capability with USB and Network and basic scan capability with USB only (if your printer supports scanning).
Windows Update:
There might be a more functional or more up-to-date driver available for your printer through Microsoft Windows Update. If Windows Update is enabled, then the Windows Update process activates automatically when you connect (USB and Network connections) the printer to the computer. It searches online for the most recent print driver on the Windows Update site. If the online driver is more functional than the currently installed driver in Windows 8, the computer downloads and installs this driver.
HP Supplied Printer Driver/Solutions:
Although HP does not formally support any pre-release versions of Windows Operating Systems, including Windows 8 Release Preview, we may supply some full functionality drivers* prior to the official release of Windows 8. These drivers may be supplied as a courtesy to our valued HP customers through this Support Forum, though no formal support will be available otherwise. We welcome feedback within these support forums. Please check back for further updates as the official release of Windows 8 approaches.
* Full feature drivers provide full product functionality, plus valuable software to help you get the most out of your printer.

Hi vireshr,
Check out the following thread.
http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-W...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Running Firefox 8.0.1 on Mac OSX 10.7.2 & can't print preview of web pages.

I have a MAC desktop running OS 10.7.2 and Firefox 8.0.1. and can't print preview of web pages. On my PC, it's there just fine. (Firefox 8.0 on Windows XP). What can be done to get print preview of web pages for the Mac? Thanks. C Baher

Firefox 4 versions and later '''do not run on a PowerPC Mac''' and require at least OS X 10.5 and '''an Intel Mac'''.
[http://www.mozilla.org/en-US/firefox/10.0.2/system-requirements/ Firefox 10.0.2 System Requirements]
The latest version for your ppc mac is 3.6.27 you can download from here:
http://www.mozilla.org/en-US/firefox/all-older.html
[http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
1. Download a new copy of the Firefox program(3.6.27) from the above link
2. Trash the current Firefox application to do a clean (re-)install.
3. Install the new version that you have downloaded(3.6.27).
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Running Safari 6.0.3 When trying to print files using Adobe Reader 11.0.02, print preview screen is all black. If files are attached to an email, receiver can't open it. It does work OK in Firefox 19.0.2 Any ideas?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Print preview not showing values correctly. (single words are omitted)

Hi,
When viewing print preview of ME23n , it does not shows the values correctly.
It omitting the single words.
If its having 2 or more words, it displaying correctly
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
Any ideas how to resolve this issue?
Is there any thing to do with printer settings & configurations / netweaver admin point of view?
Best Regards.
Zerandib

Hi Zerandib,
By the way , since its a standard program, i think that code is out of our scope.
Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
You may please check upon the same.
Is it possible to check the results on a system where patch has not been applied ?
Regards,
Deepak Kori

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

Word document print preview shows entire pasted image, but prints only part of image

I just bought a new HP 8620. When doing a copy and paste into Word, everything is shown in the print preview. However, part of the image, usually the bottom, is not printed.

Hi nedamirakl,
Thank you for your response!
If you copy a photo, does it print the whole picture? Copy Text or Mixed Documents.
After some further searching, I would recommend to try the shrink to fit option in Word, Shrink to Fit in Word 2010 and Word 2013.
If that does not work, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this helps, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

About mismatch in print layout in direct print and print preview and pdf!

Hi ,
I have created one smartforms,when I run the standard trasaction VF03 and select any output type and then when I click on print preview button,and then when I put PDF! in address bar ,the print preview will convert in PDF format,it will show output without bold and comes only in normal fonts.
Also, when I run transaction VF03 and direct click Print button, then it shows print as per requirement , but it overwrites some part on the end of page where company address is priprinted on stationary,so how can i show print format same in both condition without overwriting?
Thanks.

HI friend,
The one which is coming in the print (hard copy) is the correct one.
Print preview may be different.
So if the print is coming in overlapping format means check whether the windows are aligned properly. Because if you have given any data in main window and when it grows it over laps on another window.
If that's is correct check the printer settings for it. Only these would cause the print to be distorted.
Check this and revert back if you have any issues we will help you.
Thanks,
Sri Hari

Word for mac won't show doc in print preview and prints blank page.

I have a document from layoutready.com that I have been editing and it is a .doc file originally and won't show up. I've tried saving it as .docx and still nothing. Also, when I create a new document and put in a shape or a text box, it won't show up in print preview or print either. Excel is fine. I can insert a shape onto a worksheet and previews and prints fine. I have sent a document to a friend to test and when they open it in their word (on a pc) it previews and prints fine. I called stupid %*&#@ Microsoft and they want me to sign up for $99 Office 365 to get support. Ergh. Should I try to re-install Word? Oh, and I also updated to Yosemite last night.

Then post your question on the Microsoft Mac forums since it's their software you'r having problems with. These forums are for troubleshooting Apple products
http://answers.microsoft.com/en-us/mac

Connection between Layout Designer & Print Preview

Hi,
Can anyone tell me any hints related to the connection between Layout Designer and Print Preview (icon) for displaying the selected report layout's preview.

What is ur exact requirement..??
Generally all the layouts are stored in 2 tables in the company database, RDOC and RITM are the tables.
Hope it helps,
Vasu Natari.

Word 2013 Table of contents - page numbers all change to 2 when print (or print preview)

I have a single section document in Word 2013. The first page is a TOC. The document is 4 pages long and has three Level 1 Heading styles through out the document. The TOC initially appears correct.
When I go to Print Preview the TOC will revert all page numbers to 2.
Changing the Options "Update fields before printing" and "Allow fields containing tracked changes to update before printing" has no effect (before anyone suggests this).
The only solution is to manually update the TOC, save to PDF, and print the PDF.
Anyone can reproduce this problem. Try it....
Start with blank document
Insert a TOC (ignore the error message, we will come back to this)
Go to the end of the document and insert a page break to move to page 2
Now type a heading in Heading 1 style and press enter
type some dummy text (=rand(20) for example)
Continue steps 4 and 5 to insert more headings and dummy text.
Now return to the top (page 1) and update the TOC
So far so good. Everything working well
Now go to Print Preview (Ctrl+P)
Everything is still good
Escape back to the document
Go to Print Preview again
AGGGHHHH! All the page numbers have reverted to page 2
Happens every time without fail. Totally reproducible on all our office PCs.
I have seen many descriptions of this behavior on different forums and
not one solution. But I am like the proverbial dog with a bone - I will not let this issue go until MS gives me a solution !
Mike

Hi PHultin -
Thanks for reporting your issue.
For investigation would need the sample document.
Request you to please share your email id for correspondence.
Regards,
Reetika Ghai

I am unable to print from Firefox 20. Am running Mac 10.6. Print preview will show no content/blank page. Thanks.

Unable to print
No content in print preview

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Print Preview Chines Word layout Run

Similar Messages

Maybe you are looking for