Print preview for so10 differs btw dev n prd

Hi experts,
how come the preview of so10 between prd n dev is different even the line spacing n font is the same
i use dot matrix printer to preview

Hi ester,
1. how did u transport the standard text
   from DEV to PRD?
2. Probably the contents of standard text
   are different in DEV and PRD.
   Other wise its not possible.
3. In SO10
   The STYLE and FORM (Default is SYSTEM)
   may not have been transported to PRD
( in case its ur own style and form)
4. Maybe the SYSTEM FORM is different
in both servers.
regards,
amit m.

Similar Messages

How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

how do i fix my printer when it won't show the print preview for web pages? it worked for a while and now it doesn't. printer is an hp officejet 7310 all-in-one.

I would suspect this is a hardware issue. The rollers are probably having issues picking up the relatively smooth thick media. You might have better results be cleaning the paper pickup rollers with a damp paper towel. Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am unable to see print preview for my sales orders in VA03.

Hi All,
I am unable to see print preview for my sales orders in VA03.
When ever i am selecting an order and from
menu-> sales document-> issue output to
it is raising information message on my status bar no output
has been selected for printing.
How can i view may print preview for sales order other
than from va02/vao3.
Can we view preview of a sales order if there is no output type is mapped to
form. if yes can please give me the steps.
Thanking in advance.
Best Regards,
TRS GUPTA

Hi,
Go to NACE transaction , from there choose the V1 application,now click on Output types. now see the Output types for print related.
Now use them for your preview.
you need to provide Output type to view the preview
May be you are missing some configuration(in your case Order type may be Z* so it requires Some Config ).
Regards
vijay

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

Print preview for PO output

Hi,
I have an issue with viewing print preview for PO output.
In Messages,output type has been defined.
I am trying to display print preview of the PO outpit by clicking on the print preview button.
Instead of displaying the print preview on my screen,the printout is directly fired in the printer.Please note I am trying to display just the print preview and not printing the PO.
This happens even when I have not set 'Print immediately' indicator in Communication setting and have defined 'Send with application own transaction'.
Your input on this would be of great help,
Regards,
Bikram

Hi,
Triggering print or Preview option is dependent on driver program assigned to output type in OMTB. It will be customized program. You need to do modification in your customized program.

How to configure print preview for a customised RFQ document type.

Hi All,
I can see RFQ print preview for a standard RFQ type AN .But while I want to see RFQ print preview in customised RFQ type ,I am not able to see .Kindly let me know where I have to maintain it in customisation.
Regards
Abhijit Das

Hi,
Confirm the following settings;
SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Request for Quotation > Fine-Tuned Control: Request for Quotation > Here maintain the Customized RFQ Output Type with Operation "1" i.e. New
And then maintain the Customized RFQ Output Type in the RFQ Procedure "RMBEA1"
And then maintain the condition record in MN01 for the Customized RFQ Output Type and then check it in ME41.

Where can i see the final print preview for a rfq document./ ??

Hello,
where can i see the final print preview for a rfq document./ ??

check the output type of that RFQ.
and check in ME9a.
Regards
Prabhu

FB60 screen change layout different between DEV and PRD

Hi,
I'm having problem with transaction FB60. When i try to change the layout in PRD, in screen Edit System Setting, some of the field showing 0 length. For example in WBS element field, in DEV show length 24 but PRD show length 0. I try to compare the version but it is same (program & table structure - ACGL_ITEM). When I debug the program, found out that it will get the structure from sap internal c program call 'AB_GET_CX_DATA'. So, maybe this program version are different between DEV and PRD.
Anybody knows what is the cause of this problem? Or maybe somebody can tell me how to check sap internal c program.
Thank you very much.

Yes. FB60 is Enter Vendor Invoice. In this screen you can see a table with column such as GL Acct, Debit/Credit, Amount in DC, Cost Center and others. You can add or remove some of the field using Table Setting and create Screen Variant. My problem is, the length of WBS Element and Profit Center field is 0. How to change the length.
I already searched in forum but I only found how to create screen variant.
Thanks.

Difference in LOCL print preview for same script in two different systems

Hi All,
When I am testing a dunning letter ( Custom sapscript) in my testing system the LOCL print preview is correct...When I am testing it in my development system by taking print preview from LOCL it is not printing a uline and some line item headers...
There is one text element for printing line item header.
U1....ULINE(73)
T0    &vline& ....&T_MATNR&..
T3    &vline&
UL   &ULINE(73)
IN Development sytame in print preview every thing is perfect except the above portion the first uline and vline are not getting printed and as a result next vline and uline are dispalyed a bit above .. I am unable to understand why one uline is not printed but the othe one is printed as we are using HELVE12 in both cases and above all why in test system this problem is not occuring..
I checked and am 100% sure there is no difference between the layout versions in the two sapscripts...Also checked most of the SPAD configs in two systems and found them same..
Can you give me any idead about the reason for the diffrence in print preview as in both cases it will consider the printer installed on the local desktop....
Just we use citrix metaframe to log in SAP but that should not be the reason as thne problem would be in both system..
Please help me out...
Thanks and Regards
Sweta

Hi ,
I already mentioned that I am selcting LOCL ( Device type Sapwin) in both cases so in both cases it is considering the printer installed on the local system...
Can anyone tell me specific spad config or anything else which I need to compare in both systems..

Print out different from print preview (for THANGSAN font)

Save Our Environment. Save Yourself.
Hi Experts!!
I have created a smartform and print program which should actually print some Thai characters and English characters too. I created a smartstyle and have some 10 paragraph formats and are all have THANGSAN font. So, I am printing all the thai and english characters in THANGSAN font only.
When print preview is seen, the output is very fine, but when being printed, the thai characters are appearing fine but the english characters' font is being changed to somehting else (courier or arial). Why is this happening so? Because of this, all the output is being merged and looking very weird.
The smartform is created in EN and is translated to all languages. All user has logged on to SAP in EN language.
Can somebody please help me out with whether the problem is with THANGSAN or the printer?
P.S. The smartform is actually similar to the standard script Z_RVINVOICE01 in which only THANGSAN is used.
- I'm not an environmentalist. I'm an Earth warrior.

Save Our Environment. Save Yourself.
Hi Sandra,
Thanx for the reply. I do not have authorization for SMARTFORM_TRACE. Though I entered by debugging, I did not understand what should be done there.
But as you said I created a spool. Can you please help me in how to check that RAW thing?
Thanks a lot.
- I'm not an environmentalist. I'm an Earth warrior.

Print preview for quotation

Hello friends,
I have maintained the VV11 record but still i am not able to see the print preview of the quotation?
I am not sure about the steps for output?
Will you please tell me the steps for the output control for quotation?
as well as once it is set will it reflect in SO as well as in the billing docs or it needs different settings?
Thank you.
Sadanand.

Dear Sadanand,
>First you check the out put determination settings through IMG path SPRO>Sales and Distribution >Basic functions>Output control>Output determination>Output Determination Using Condition Technique-->Maintain Outptut determination for sales documents.
If you want output for billing and deliveries you need to do the outptut determination for the deliveries as well as for billing seperately.
I hope it will help you,
Regards,
Murali.

Print preview shows me different colors

Hi, I'm Nevio from Italy.
I've bought a new MacPro and installed new Photoshop CC.
I've a big problem: when I have to print an image, print preview shows me the image but with different colors (there is a blue dominant and a different brightness).
I try to select another printer profile or document profile but there is no way to have the same image in the printer preview window.
How can i solve this problem?
(I also try to uninstall and re-install all the CC Software, the printer and all profiles but no solution yet)
Thanks
Nevio

Photoshop File> Print preview color has been flaky in the past, i wouldn't rely on it for color -- how does it print is the bigger question...
if it prints bad, how does your print profile SOFTPROOF

PO print-preview for a PO with all deleted line items

Hello MM Gurus,
I am not able to print preview of a PO for which i deleted all the line items. It gives me a message saying that no print relevant changes.
Client need to print such POs. Client expects a text like "item cancelled " for deleted PO items.
My understanding is that its standard SAP pre delivered customising however it is not working.
Pls suggest.
Regards,
Pankaj

Ask your ABAPer to modify the smart form, deleted materials wouldn't come for obvious reasons in standard system ... you need to get in customized/ developed.

How to find out the driver program and script for print preview for PO

Hi All,
We are getting some text output on the print preview of a purchase order.
How can we determine the driver script and the corresponding print program for this.
Can you please guide on this.
Thanks in advance.
Regards,
Sanjeet

Hi,
check with below table
TNAPR --- Processing programs for output
and NACE Transaction code
NACE -- out types
Regards,
Madhu

Automatically prompt to save PDF when Print Preview for Purchase Order?

We recently upgraded to EP7.
I have an end user that does our PO's.
She swears up and down that she used to be able to go into any given PO, be it new or existing, and click on the print preview button. She says when she did this she was prompted to save or open the file.
She is set to PDF Preview when doing a print preview of the PO.
When we first upgraded the system, it was broken. When she tried to do this it would give you a Page Cannot Be Displayed error as in unable to find the page. We learned that there was an issue with name resolution within the system. We fixed this and now she can view the files as PDF when doing a print preview.
But she still claims it did not used to work like this that when she went to preview she would be prompted to save or view which worked great for her because she could click save, save it to her computer, and then email it to whomever she needed to send it to.
Seems clear to me that that when you do PDF Preview that an SAP browser session is created and sent to an web site (internal to SAP of course) to view the PDF. How can I tell SAP to give me the option to view or save?
For now the user is repeating the output when she needs to reprint another copy of the PO.
I should also say that we use Free PDF Creator. After setting her default printer to this, she says that now when she creates a new PO, it is working like before. So its possible that the prompt was the one from PDF Creator.
The user says she swears she could simply print preview would allow her to save local. I never saw it for myself prior to the upgrade.
Anyone seen this before or can offer any clues? Is there away to issue output at print preview?

How did you fix 'page cannot be displayed' error?
It looks like issue was at browser/pdfreader side.

Print preview for so10 differs btw dev n prd

Similar Messages

Maybe you are looking for