Print Preview goes berzerk

A visitor to my client's site reports that prior to printing
the page, in print preview mode, the page numbers keep increasing
and don't stop. When I inspected the HTML, other than there are
several tables (which is unlike the other site pages which behave
properly), I can't figure out why this happens.
http://www.russianczarcuisine.com/storelist.html
Any ideas?
Nedward

I doubt that anyone would go to the trouble to make a virus
that did this
kind of thing.
I didn't see anything strange in IE6, either, other than the
fact that the
page needs a print stylesheet to turn 3 output pages into 2.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"josie1one" <joleros[nospam]@yahoo.com> wrote in
message
news:efbd9c$jia$[email protected]..
>I tried it in IE6 and Firefox, no problems there.
> If you get others reporting the same, I'd suggest the
visitor to the site
> had the problem. Some weird virus?
>
> --
> Jo
>
>
> "Nedward" <[email protected]> wrote in
message
> news:efaehh$94l$[email protected]..
>>A visitor to my client's site reports that prior to
printing the page, in
>>print
>> preview mode, the page numbers keep increasing and
don't stop. When I
>> inspected the HTML, other than there are several
tables (which is unlike
>> the
>> other site pages which behave properly), I can't
figure out why this
>> happens.
>>
>>
http://www.russianczarcuisine.com/storelist.html
>>
>> Any ideas?
>>
>> Nedward
>>
>
>

Similar Messages

Getting Error While Going For Print Preview in ALV Report

Hi,
We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem.
Regards
Suresh

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Adobe form is going to Spool directly want a print preview

HI Experts,
I have created a class where I am calling a standard Material document print form WOST_WSGM_MATDOC_PDF but it is directly going to spool.
NOTE : I am calling this class method in one of my POWL Feeder class which is linked with standard GR print application and I want it to be previewed for user to save.
Please refer the code below.
DATA iv_funcname TYPE funcname.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
 EXPORTING
 i_name = 'WOST_WSGM_MATDOC_PDF'"gc_mat_doc_form_name
 IMPORTING
 e_funcname = iv_funcname .
DATA iv_outputparams TYPE sfpoutputparams.
CALL FUNCTION 'FP_JOB_OPEN'
 CHANGING
 ie_outputparams = iv_outputparams
 EXCEPTIONS
 cancel = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
DATA fp_docparams TYPE sfpdocparams.
DATA fp_formoutput TYPE fpformoutput.
Now call the generated function module
CALL FUNCTION iv_funcname
 EXPORTING
 /1bcdwb/docparams = fp_docparams
 mat_doc_header = es_mkpf
 doc_type_txt = es_t003t
 vendor_data = es_lfa1
 plant_data = es_t001w
 move_plant_data = es_t001w_move_plant
 mat_doc_item_tab = et_mseg
 mat_doc_printgrgi = et_printgrgi
 IMPORTING
 /1bcdwb/formoutput = fp_formoutput
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
 CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
 IMPORTING
 e_adserrstr = ls_adserrstr.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
When I am running this class individual then I am getting the print preview but when I am running it through portal by calling it in the feeder class then It is going directly to SPOOL request.

try passing PREVIEW field "X" in FP_JOB_OPEN.
Uma

FF windows goes blank white and freezes if I click a link in another application when Print Preview is open in FF (Win 7 64-bit)

Possible bug: FF dumps my session if I try to open an external link without closing print preview view. I had left the Print Preview screen open in FF after printing a web page, and I clicked a web link in another application, which would have normally opened in a new tab in FF. However, only the Print Preview window was displayed and when I clicked "Close", the FF window when all white. Back/backspace wouldn't work and I had to close FF and start a new session. I tested this a few times and it happens every time. I didn't think to test whether this happens in Safe Mode.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

I cannot print from a website using the "print" button nor going to "file" "print preview" (nothing there to preview) then "'print" - nothing prints.

I cannot print from any wetsite as there is no print button. I have tried using the printer icon, also file, print preview then print. Nothing to preview nothing printed. How do I print from a website?????

If this is similar to problems I sometimes have printing -- 1) Only happens on some, not all, websites 2) Printer preview window comes up OK, just shows a blank page -- I can suggest a work around, if not a solution: try turning your page into a PDF. Either install an extension which gives a "Save as...PDF" menu option, or a PDF printer driver (I use bullzip). The problem seems to be with the manner the websites use frames and/or javascript. This work around also handles websites that can't get along with your printer settings and chop off edges.

User gets odd behavior when print previewing calendar

User calls with an odd problem.
She is using 32 bit IE 9 with our SP 2010 farm.
She goes to her department calendar. She sees events.
She presses Print Preview. No events are shown on the page.
She tries to export the data to Outlook - it tells her there is too much data.
She calls me.
I look - her default view is running into the resource throttling of the farm. So I try to create a unique view that only shows this week's events.
It works fine for me. Print preview and printing work as well.
When she looks at it in her browser, it works fine.
When she tries to print preview - no events show up on the preview page.
She tries to export from the new view - Outlook gets no events.
She is using IE9, so the IE7 comments in old threads are not relevant.
I set the web part configuration to 12 inches as one conversation suggestions. That doesn't help.
Does anyone else have any ideas of things to try?

When I look at the custom calendar within SharePoint Designer, the page has a ListView Web Part but not an XsltListViewWebPart.
I have tried several times to step through blog entries that describe editing the page, setting the view of the web part, etc. At one point whatever I tried turned the calendar view into a list view ... sigh. I created a new calendar view and made it
the default.
I have asked the user to try the print preview out today to see if it works for her after I created the new view.
The really odd thing about all of this is that at least 2 people don't have the problem with not seeing event data in the print preview.
It _almost_ sounds like some sort of machine specific issue she is having.
I wonder if I should ask the admins to repair Office 2010 on her machine to make certain the DLLs are all working properly.

Excise invoice print preview.

Hi..Gurus,
How we can see the print preview of the excise invoice. What the settings that are needed?
regards,
jyothi.

hI,
gOTO t.CODE NACE and select V3 then click the output types button, then select j110 for out put type for excise invoice, also maintain condition record and accesses sequence for the output type, then assing this to partner function, also for processing routines specify medium as 1 (printout) program as RLB_Invoice or what ever developed in your project also assgin smartform which was developed by your ABAPER.
Then do the output determination by going to SPRO>SD>BF>output determination>output determination for Billing.
If you maintain all these then you will be able to see the print preview of your excise invoice by going to VF02 and select the output type and then see the print preview but first you have to create your excise invoice.
Hope this will give u some idea,
Reward points if helpful.
Bye
Anil

Print Preview of crystal Report without add a document

Dear All,
Can i see the Print Preview of Crystal Report without add a document like PLD.
i have developed a Crystal Report through Add Command by Passing a query.
if anybody have idea on this issue please suggest me.
Thanks.
Shekhawat

Hi Shekhawat....
Through Query Crystal report it is not possible to view the Layout as Draft withou adding teh docs because Report fetch the details only when itys value goes to Database Table......
So suggest to use SAP standard CR and modify as you want....
Regards,
Rahul

How can I select paper size while in print preview ?

I have a printer with four different paper trays, and each one is loaded with different size of paper: A3, A4, Legal, envelopes. When I use IE 11, I can easy go to print preview, click on page setup (little gear icon), select paper size , margins, etc.. there, and when i hit OK, the page is adjusted to the settings I selected and its ready to print, and printer selects the proper size of the paper automatically
In Firefox v32, I can almost do this same, but I'm stuck with printing only on A4 style paper, as I don't see where to select the paper I want to print on !
I tried to select A3 and legal paper in the printer driver, but then firefox used the selected paper, but printout on the paper came out as set to A4 size, and rest of the page was empty ! Also I was not able to see the page preview of the selected paper either. How do I then print on other size papers than a4 ?
I found only one workaround which does not suits my needs but works: First: Go to printer driver and select legal or A3 paper as default, and then open firefox. If I do that i can print on any paper I select, but thats a horrible workaround, because then I often forget to change the default paper size back inside the printer driver, and i print my documents on wrong paper, wasting paper, ink and time...
Please let me know if there is a way to fix this printing feature somehow.
Thanks.

MichalB,
Sorry, IMO there is no real "fix" for what you are experiencing. Printer prefs set or changed in the operating system won't affect Firefox printing ''[IMO, either ancient code in Firefox or a "cross-browser thing".]'' Firefox has its' own settings for prefs and it defaults to the "last used" for all printer preference setting. And there is no way to set a pref as "use now and return to my defaults after this print job is completed".
As you have found out, there is no way of changing paper size from the Print Preview screen. Other prefs - Margins & Header/Footer can be changed via Page Setup and you can see changes in the Preview window, but not for paper size. As ''CoryMH'' mentioned, '''paper size''' is selected thru what called the "native print dialog" box using the '''Properties''' button which shows a window provided by your printer software for the Printer which is selected in the "native print dialog" window, and accessed after you hit the Print button in the Print Preview screen.
Problem is that you can't '''"preview"''' what is going to be printed when you change paper size. If you go back to Print Preview without printing from the "native print dialog" the change for Paper Size isn't saved for viewing in Print Preview!
IMO, it would be nice if Firefox recognized each "tray" as a separate printer, so that a user could set Margins & Header/Footer prefs AND paper size per tray. IOW, a feature sort of writing a completely new print module that would reflect "today's" environment with multiple tray printers; rather than to continue using the print module that was built by Netscape back in '94 - '95, which we are stuck with almost 20 years later.
''As I sit here shaking my head after composing this reply, wondering why the issues I had back in 2002 with printing from Firefox / Firebird / Phoenix haven't been corrected in the last 14 years.''
''I do like "old stuff", and have a vehicle sitting my driveway that rolled out of the showroom 30 years ago come October 1 - a 35th birthday present I purchased for myself. [85 Corolla GTS TwinCam coupe - aka Sprinter in GTA] But as far as computer software, I prefer it to be compatible with hardware made in this century.''

How can I print a whole email document and not a "screen shot" like I get in the Print Preview option.

How can I print a whole email document and not a "screen shot" like I get in the Print Preview option. I'd like to print from "file" and print" like I can on other browsers (IE, for example). When I try to print from Firefox it grabs all my info (file folders, etc.) from the left side of the page. I need just the email information, not the entire screen information. Thank you!
-Bruce

I agree; I should, but I can't :) I have an orange Firefox drop down that I go to to print, and it allows me to select "print", "print preview" and "print setup", where I can change the margins. It always defaults to a full screen shot (I use Yahoo) and does not show just the email. I don't need to print what is on the left side of the screen or anything other than the email (I can achieve these things by using file-print from IE, so I know it is doable, and I am still going into Yahoo and using their email when I do it).
Hope this helps. I'm not a fan of IE, but I really don't like the print properties I'm getting here (I'm a long time Mozilla user, but I'm losing too much info with this option and can't afford that anymore).
Thanks for the help!
-Bruce

Help reqd to display the form output without print preview

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one t-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Sankar,
Simply put a parameter statement .
for example.
parameters : vbeln type vbrk-vbeln .
when u ll execute.U ll get the selection screen asking u for the perticular parameter,U input that and execute.U ll get the output as print preview.In the above query i ll input vbeln and ll get the o/p.Similarly u enter Ur getpass no and u ll get the printpreiview as o/p.
Reward if useful.
Regards
Rudra

Help reqd to display the form without print preview call

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples of code,if possible.
thanks & regards
sankar.

the following code are suitable for SMARTFORMS print,please refer to the BOLD section:
call function 'SSF_FUNCTION_MODULE_NAME'
 exporting
 formname = v_form_name
VARIANT = ' '
DIRECT_CALL = ' '
 importing
 fm_name = v_fm_name
 exceptions
 no_form = 1
 no_function_module = 2
 others = 3.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*Call Smart form
data: t_control like ssfctrlop.
if not p_fax is initial.
 t_control-device = 'TELEFAX'.
endif.
 t_control-PREVIEW = ' '. "space means no print preview.
call function v_fm_name
exporting
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
 control_parameters = t_control
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
 tables
 l_xcredit = icredit
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Needing a 'print preview' capability for HP Officejet Pro 8600 (model N911a)

Please provide a 'print preivew' capability via the HP 'print window' for the 8600 Pro.
I purchased this machine in early April 2014 after the prior printer (photosmart 410) 'threw-up' ink inside the printer. The software with that Photosmart 410, prior (and perhaps some current) HP printers provide a 'print preview' capability.
I have several systems (some Windows Vista; some Win-7). All are current with maintenace (including HP S/W & drivers).
The printer is ethernet-cable connected to a 'switch' and in-turn ethernet-cable connected to a wireless router. Some PCs are also ethernet-cable connected; others are wireless connected.
The ability to do a 'print preview' via the HP S/W is not available on any system (i.e. via the 'print' window or subsequent windows, like 'Properties' or 'Advanced').
While some applications have a print preview capability, not all do. Having that capability via the printer 'window (i.e via HP provide S/W) is necessary - it is useful to make sure formating is proper, allows for subsequent changes if needed, and provides the abiloity to see and select the printing of only some pages.
This issue and request has been raised several times - going back to 2012. Just do a search on the Forum using keywords '8600' and 'preview'. The following are a couple instances:
1) http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Automatic-print-preview/m-p/1529879...
2) http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Where-is-Print-Preview/m-p/3299717/...
3) http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/8600-Pro-no-print-preview-Can-I-use...
Jim

Hi DragonflyFairy,
I understand you would like to know how to get the print preview when printing from the internet.
Depending on what browser you are using, you should have the option to do the print preview.
I have provided 3 different browsers with how to get to the print preview.
Internet Explorer: Go to file, print preview and make your adjustments.
Google Chrome: Go to the icon in the top right corner and click the icon with the 3 lines, click print, make your changes.
Firefox: Click on the tab Firefox dropdown and select print, print preview. Change your settings.
If you are missing the print preview, take a peek at these documents to see if it will help.
Unable to print or view the print preview of a webpage in Internet Explorer.
Fix printing problems in Firefox.
How to print websites.
I came across this article that you may want to take a look at, if you are using Google Chrome.
Printing Problem - Will Not Load Print Preview.
Try another browser if you are having the same issue.
What browser are you using?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

New condition type print preview time out.

Dear all,
I am a ABAPer.
I am facing one problem in PO Print preview.
My MM consultant defines one new condition type-ZPF5 .
Instead of ZPF2 we are using this condition type- ZPF5.
After that in PO ,Net value & everything coming fine.
There is a smartform also related to this.
I have added all logic related to ZPF5 .
But when going to print preview In production & clicking on print preview,
It is giving time out after 9-10 mint-Time out for ALL po,not only for this condition related .
v_no = &SFSY-JOBPAGES& -1. "in this line.
&SFSY-JOBPAGES& means " Total number of pages in the currently formatted print request.
I saw M/08 - ZPF5 Print equal to 'X ' & Statistics is ticked for this.
But when I revert back old SMART FORMS & PRINT = blank,print preview is coming fine for all PO except
ZPF5 Is not affecting in print preview,but in PO affecting.
Any help from MM side?
Thanks
Gourav.

Dear all,
Issue resolved.
I have changed my select query & remove old condition from that,now I am using only ZPF5.
Like :
SELECT SINGLE KBETR KWERT KRECH FROM KONV INTO (V1_KBE,V_PF,V_KREC)
         WHERE KNUMV EQ V_KNUM AND
               KPOSN EQ WA_MAT-EBELP AND
               KSCHL EQ 'ZPF5'. " not zpf2
Thanks all for your time.
Thanks
Kumar Gourav.

Print Preview goes berzerk

Similar Messages

Maybe you are looking for