Print Preview of PO with message status as "Processed"

Hello,
I need to make available the print preview of Purchase Order even when the Processing status of output is "Processed".
Normally the print preview works when the status is "Processing" or when there are still print relevent changes existing in PO. When the message is output by ME9F, there are no more print relevent canges and SAP does not allow preview option in PO. I want to make this functionality available.
Any solution?
CMV

Hi!
You can check the table NAST (field VSTAT) for the statuses.
Application 'EF' for PO.
Objkey is the PO number.
Regards
Tamá

Similar Messages

  • Crystal Report Print Preview presenting users with Database Login

    Issue
    A user amended a crystal report form, on doing so has now made that Form unavailable to the majority of users to Print or Preview this is in 8.8 PL10. All other users on Previewing are presented with a window  Database Login, but this only presents the server name, Database name is blank and greyed out and then there is only Login ID and Password available. If you enter in the database password a message appears stating failed login.
    We have access to the SAP server and logged in and get the same message! but on the users machine who amended the Form they can print? any suggestions greatly appreciated

    Hi Roger,
    The problem sounds similar to what I've had recently, it was resolved by changing the database connection type to SAP Business One in Crystal Reports 2008, I can confirm that using OLE DB or other will still cause the login issue on other machines off the SQL server, the SAP Business one connection solves the issue.
    I was fighting with this for hours, hope this helps you all.

  • Print Preview Purchase Order with release strategy

    Hi gurus,
    With release stratregy you can not print a PO before release through ME9F. The system will give error message 'No corrosponding document found'. However, you can print PO through 'Print Preview' by clicking on Print icon in ME22N, we need that "Print Preview"doesn't print PO without release. System it shouldn't print.
    Thank you!

    Hi,
    Hope you are using Z output type & print program for PO printing. You can restrict this by modification in program. Please do it with help of abaper.
    Regards,
    Sandeep

  • Print preview not opening with File Print command in CS4

    I have been printing fine until recently, but now when I choose file > print in Photoshop the print preview pane does not open. The menus gray out, but that's it. If I select print from other programs (I checked Preview and Acrobat) the print dialog appears. I am working with CS4 11.0.2. on OSX version 10.6.8, printing with an Epson 2200. I tried deleting and re-adding the printer. I haven't installed anything new recently that might interfere.
    Your help would be much appreciated!

    Try a different printer driver to see if this has anythign to do with the .ppd used by epson 2200, try even adoeb pdf.
    Reset your preferences.
    Cmd-Opt-Ctrl-Shift when restarting AI on a Mac  to reset to the defaults.

  • Missing print preview icon in Shopping Cart status srm 5.0

    Hello,
    Some users don't have the print preview icon in the shopping cart status.
    I checked attributes and authorization, but that isn't the problem as far as I can see.
    b/c some users have this problem and others don't I don't have any idea what the problem might be.
    every idea is welcome!!
    thanks in advance
    Jan Holland

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Print Preview of smartform  with device type EPESCP9

    Hi all,
    I have created a z smartform to print commercial invoice.
    I am using dot matrix print Epson FX-2170 to print invoice.
    For this printer the device type is EPESCP9.
    So I created an output device having device type EPESCP9.
    I have assigned the required Format type to the device type and the page format which is assigned in the smarform to the Format type.
    But I am not getting any print preview of the invoice when  I select this output device.
    I am only able to get print preview when I select an ouput device having device type SAPWIN.
    Please provide solution to get preview in device type EPESCP9.
    Edited by: Vinod Iyer on Apr 24, 2008 6:08 PM

    Hi,
    1.I think You are assigned the Printer details in SPAD.
      2.The page format and Printer settings are correctly done ,then it will come.But,the main problem is ,the page format is not supposed to match.Please check that page format in smrtform and Printer settings.
    3.If posible see those settings in I18n also.
    Regards,
    Shiva.

  • Print Preview is different with actual Print

    When I try to print a PO, the Print Preview is correct, but the actual Print is not as same as the Preview, because the Item Description row is truncated. The strange thing is that it was not truncated in the Print Preview.
    Any body has an idea?

    Hi Victor,
    There are settings in the Document Properties for each layout in PLD that can have an affect on how the layout is displayed in print preview.
    1) Open your layout in PLD
    2) Right-click on the layout and choose Display Document Properties
    3) In the Document Properties window, choose the Format tab
    The Preview Printing section changes settings when you preview the layout rather than sending directly to the printer. Try turning that option off for the document or changing the Change Size setting.
    Kind Regards,
    Owen

  • Prints an extra page with message

    Every time I print I get an extra page. I'm only prinitng one doucment and I get a second page with the following message:
    userdict/ESPW1{}bind put
    Can someone help make this stop?

    No the printer does not. I was finally able to solve the problem:
    1. The X driver will not download at all from Minolta's site on the Mac Pro using firefox or safari as its a .gz file.
    http://printer.konicaminolta.com/support/current_printers/pp1250e_sup.htm
    2. Found another link to download from Minolta. Installer would not work - it quit with an error - Minolta site says 10.2 or later - using 10.7.4 so maybe not.
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=987&fil etypeid=5
    3. Found this link instead:
    http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productname=macin tosh%201250e
    Needed to download Unstuffit for Mac to open this file as Mac Pro would not uncompress this file.
    4. Needed to manually install the uncompressed text file "PagePro 1250E" (from #3 above) at the following location to make the error go away:
    Library/Printers/PPDs/Contents/Resources/PagePro%201250E

  • Delete and Message Status

    Hello everyone,
    We have a number of messages in tabble SXMSPMAST with messages status = 003 Processed Successfully. But their adapter status is other than 006 (Executed successfully on outbound side).
    They either have status 001 (Messages sheduled on outbound side)  or  007 (Message has error status on outbound side). As a result the background delete job that runs daily is not picking them up (or at least that is what i think is happening).
    Unfortunately the client has only one XI server. We want to go live soon and we would like to have a clean db (if that is possible).
    Any ideas would be greatly appreciated as message admin in XI is for me still a very confusing area.
    Thanks in advance
    Dimitris Hagigeorgiou

    Hi,
    RSXMB_DELETE_MESSAGES does not take into consideration messages which have error in the adapter.
    Have you tried to manually set the status of such messages to System Error, when the adapter status is 001 or 007? I think you should be able to set it.
    Regards,
    Puloma.

  • Unable to print or print preview with limited financial license

    Hello Friends,
    I am working with a rev 9 Business One client who has a limited financial license.  He connects to B1 through RDP.  When he attempts to print or print preview he gets the message "You are not permitted to perform this action." and the button "Authorize by another user".  Which we can do to print (example, the A/R Aging report).
    I have searched the Authorizations and found nothing related to printing.
    Any thoughts appreciated.
    - Beverly

    Friends - the authorization is under Sales - A/R : Document Printing.  That was a big surprise !  This question is closed.

  • Monitoring EOIO Messages stuck in AE with HOLD status?

    Hi Gurus,
    Scenario: IDOC -- > XI (Message split) - - > (HTTP/File)
    Some times messages to File adapter are stuck in Adapter Engine with status "HOLD". Found the root cause and un-checked "Maintain order at runtime" in interface determination.
    How to get alert if the EOIO messages are stuck in AE with status "HOLD"?
    Please help.

    Hi,
    HOLD status
    This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
    If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
    Regards,
    Sreenivas

  • Print preview when creating a PO

    Hi guys,
    when we create a purchase oder and want to see the print preview,
    there is a message no print-relevant changes to document.
    So you have to save the PO and the you can look at the print
    preview. Is there a way to get this print preview while creating the PO?
    If a modification is needed, which program or user exit is used therfore?
    Thanks for help,
    Barbara

    Hi,
           Go to me90 and pass the purcahse document no and pass the message application as EF and make the processing status as '1' then click on execute select purchase order no and then click on display output button u will see the printpreciew of the PO.
    <REMOVED BY MODERATOR>
    Regards,
    Sunil
    Edited by: Alvaro Tejada Galindo on Feb 29, 2008 10:36 AM

  • Firefox 6.0.1 is not printing page footers even though they show in print preview

    Bug report.
    This was (presumably) a result of the upgrade to v. 6.0.1 installed 8/31/11. First failed 9/1/11.
    Page setup still shows page count and date. (No surprise because it shows in the print preview.)
    Tried with three printers: HP DeskJet 930 - no footer; Brother HL5250DN - no footer (also no bottom margin); PDFCreator 1.2.1 - footer appeared!
    The last result makes it look as though the problem is somehow related to the printer or printer driver.

    Bug report.
    This was (presumably) a result of the upgrade to v. 6.0.1 installed 8/31/11. First failed 9/1/11.
    Page setup still shows page count and date. (No surprise because it shows in the print preview.)
    Tried with three printers: HP DeskJet 930 - no footer; Brother HL5250DN - no footer (also no bottom margin); PDFCreator 1.2.1 - footer appeared!
    The last result makes it look as though the problem is somehow related to the printer or printer driver.

  • Purchase order - print preview problem

    Hi friends,
    i have created  a Purchase Order, when im trying to view the print preview, im getting the message ' <b>Specify address number or Address handle'</b> .
    Please specify where i have to give these details in PO.
    Regards
    kumar.

    Depends on what address information you are displaying on the Smartform if you are displaying the Plant address then you have to go to T001W and pick up the ADRNR from the Same table and display it in the Smartform Address Window same thing for the Vendor address you have to pick up the ADRNR in the LFA1 for that particular Vendor.. Remember to check if the ADRNR is not initial before you display a address window..
    Hope That Helps
    Anirban M.

  • SAPScript - Print Preview 2 Pages - Physical Print overlap as 1 Page

    HI Experts,
    I have a problem with Invoice SAPScript Printing - where the print preview is good with 2 Pages,
    But when it physical prints out - Only 1 page and overlapping the Second page content to the first.
    Any idea where did I miss out?
    Thank you in Advance.
    Regards,
    CWLIM

    HI ,
    Sheelesh  is right.
    I had both SAPScript and Smartform issue with the overlapping printing.
    What you need to do is to check your page format to see if it is the correct size for the specific printer.
    If it is too big for the printer paper size - it will overlap the printing as 1 page.
    For example : A4 Lanscape printing on normal HP Laser Printer - DINA4 Landscape should be used.
    Or at least when you define your own page format - refer to the correct size and orientation.
    HOpe this helps.
    Thank you all

Maybe you are looking for