Print preview of smart form
Hi all,
how to view the print preview of a smart form and how to debug the smart form
Thank You
SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
For debussing -
1. write BREAK POINT in the code window.
2. Put a break point on the call function in the driver program
3. put a brak point in the generated Function module.
Refer this link too -
Re: smartforms
Regards,
Amit
Similar Messages
-
Problem in Print preview of smart forms in different servers.
Print preview is different in different systems(development and Quality) for the same smartform, though everything is same.
both are seen on print preview of locl printer, and I have checked the settings of locl in spad also and this also has no difference, there is absolutely no difference in smartform ,style paragraph format or character format.
Can anyone please let me know what could be the problem.
Help is appreciated.Hi,
check this link it might solve ur problem.
Re: Smartforms Print Preview Problem
it might be the same issue which u r facing with..
Regards,
Sana.
reward poitns if found helpful.. -
How to print bullet in smart form
Hi Experts,
I have a requirement in smart form where different points of texts should come under a bullet.
Can you please tell me how to print bullet in smart form.
Note : I have to use Standard text
Thanks in advance
Bikashi
good
We can create bullets in smartforms.
For this change the editor to text editor and then
goto insert->characters->SAP Symbols and select the
symbol you want.
This may help your requirement.
You cannot see the bullets in print preview, it'll
appear only on a hard copy.
reward point if helpful.
thanks
mrutyun^ -
Use of NACE after creating print program n smart form
Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
Please help me out.Its urgent.
Thanks & Regards,
Santhosh.Hi Santhosh,
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.
Reward Points if useful.
Thanks. -
How to Printe Graphics in Smart-Forms
Guys,
Need your help
Is it possible to print graph in smart form???
If yes, if you have any document, please pass it to me
DhirajHi Ram,
Go through this hope u can understand.
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
/: INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Reward points if help ful.
http://www.sap-img.com/ts001.htm
Sorry i think for Scripts ..
better to go for above post . it definetly works
Thanks
Naveen khan
Message was edited by:
Pattan Naveen -
Passing printer name to smart form
Hi,
How to pass more than four characters printer name to smart form function module name. Please help me. I will give points.
Thanks.Hi,
Thanks for your reply but there I can pass maximum four character printer name but my case printer name contains 12 characters. If I pass 12 characters printer name it is considering first four characters and it is displaying printer name is not found. So please tell me how to pass more than four characters printer name.
Thanks. -
Can not get print preview of Adobe forms
Hi Gurus,
I am not able to see the print preview of adobe forms, and when i click on print preview, i get this error code..
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
I don't see any logs from SM21, and so I don't think this some code error... I configured ADS as per the document, and all the configuration tests are passed except this print preview...
Any suggestions?
Regards,
NrisimhanadhHi
Please check this parameter
OUTPUT_OPTIONS-TDNOPREV
hope this helps
Regards
Aakash -
How to Print Vertically in Smart Forms
I need to print data in vertical format into columns in smart forms. Can any one give me the solution.
Hi Sreedhar,
In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
Best Regards,
Ram. -
Slow down printing speed for Smart Forms
Hi,
Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
I need that because when I print that smart form to fast I run into print out quality problems.
Many Thankshi,
take print out in a dot matrix printer instead of your laser printer without changing any settings.
Coz i tried this once, i was successfull. But, the printout will be very slow.
regards,
kool. -
Issue While printing / Previewing a Adobe form in Web Dynpro ABAP application
Dear All,
We have designed 4 different adobe forms using SFP transaction for 4 different countries in SAP system.
Every country have different terms and conditions and therefore we have placed static texts (Hardcoded text) with text in different styles. Some text is in bold, some in different font (Bold, Italic). Font and Paragraph settings of the text was done as per expected. All the forms have same font and paragraph settings.
When we Launch Web Dynpro ABAP application to open the form in Print preview or to take print, form is not getting displayed / printed as it is designed in SFP. But if you open the form in SFP, everything looks fine.
It is working fine for 3 different forms but problem with only 1 form.
Kindly guide what is the reason for this strange issue when previewed or taken print. It is very urgent.
Thanks,
Bharath.KDear All,
Thanks for your responses.
We had identified the reason.
Customer has provided terms and conditions for all 4 countries in PDF document. Along with PDF, for 3 out of 4 countries customer has shared pre-prepared word document with pre aligned and justified terms and conditions as per expected outcome. We copied this text from word to Adobe form layout. It worked fine. For 1 country, customer have not shared terms and conditions in word document. Therefore we had copied text directly from adobe PDF document in to Form layout. Then this issue happened.
Solution for this issue is to, prepared a word document with expected alignment and justification of terms and conditions text . Then copied from word to adobe livecycle designer form layout. It worked fine.
Thanks,
Bharath. -
Error in display print preview of PF Form....
Hi gurus,
I am able to generate the report for the transaction code pc00_m40_EPF for form 12A. but could not get print preview for the same.
I am getting the results but couldn't generate report. its giving (print error) Last month payroll results not available for employee no. 00000001 though i have payroll results for that period. Please guide me..
Point will be awarded immediately n accordingly.
Regards,
Ravi
Edited by: ravi Kumar on May 25, 2010 5:50 PMCannot find PDL type for output device LP01
This is related to Printer
still you are not able to get the desired results for Form12B
Cross check
the entire configuration of your PF and check the Live results are being updated in Clusters or not
still if the problem presists please contact me you can check my Bcard
Note : once the issue is solved please update the thread or i will update on behalf of you -
Hi,
There is a Strange issue I am facing now that is print output is getting changed according to the printer settings.
Even though I specified the output_options-tdprinter = 'ZPDFUC',and output_options-tddest = 'LP01' while calling smart form FM the printer option always takes the printer setting present in user profile.
Is there a solution where the smart form by default picks one printer but not in the User profile settings.
Regards,
DeepaHi,
There is a field check it and set the value X to overwrite the system details with manual settings. when calling the smartforms.
Thanks,
Vinayaka -
Using Continuos Printing stationary with smart forms is that possible ?
Hi All,
there is an instance where we have to use continuo's stationary for printing Payment Advices for the vendors with bankers cheque attached to the payment advise is that possible in smartforms also i have know that is possible in scripts but the requirement is in smartforms and can we do that in Smartforms.
If any one have seen the same instance earlier, take your time to guide me the process.
Thanx all in advance..
RajWith smart forms i have dropped the idea as it is not that flexible as script..
if am not wrong~
I have resolved it and have done the needful for printing the cheques and Payment Advices... in scripts with any kind of printer.. using Scripts.
Any one dealing with FI ABAP having any kind of issues with the Payments advices and cheques can always ping me for any doubts...
payment advices ,
cheque printing,
vendor aging,
customer aging,
brs upload program,
Service tax reports,
TDS reports,
vendor master upload,
customer master upload,
gl balance upload,
NCR Report,
and some co Reports..
these are some of the things where i have masterd for now..
any one i need of these can always get in touch...
cheers and all the best.. to be a brilliant ABAPER...
Raj ([email protected]) -
Print portrait orientation smart forms zebra printer
Hello,
I have designed a label with smart forms. The dimensions are the following: width = 11 cm. Height: 15 cm. The label has been designed in portrait form but the zebra 105 SL printer print it in landscape format. Does Anybody knows how to fix this problem ?
Thank you.Hi,
You didn't check your printer settings in Printers and Faxes in control panel. It cannot happen the way you say.
Feel free to revert back.
--Ragu -
Problem in multiple printing in the Smart Forms
Hi Experts,
From the driver program I am passing Internal table with multiple records for employee,
But the smart forms is printing only single form for the employee.
Could you please suggest what need to be done in order to print multiple forms for employee.
Regards,
IFFIF sy-tabix EQ 1 .------>only for first loop it will give dialog box
CALL FUNCTION fm_name
EXPORTING
user_settings = 'X'
vbeln = it_vbeln-vbeln
pdf = r2
rbiclear = c3
IMPORTING
job_output_options = job_out
einv = einv.
ELSE.
c_par-no_dialog = 'X'.----
> if u set this then u will not get dialog box again and again
out_opt-tdnoprev = 'X'.
out_opt-tddest = job_out-tddest.
out_opt-tdprinter = job_out-tdprinter.
CALL FUNCTION fm_name
EXPORTING
control_parameters = c_par
output_options = out_opt
user_settings = space
vbeln = it_vbeln-vbeln
pdf = r2
rbiclear = c3
IMPORTING
job_output_options = job_out
einv = einv.
ENDIF.
Maybe you are looking for
-
My iphone 5 is not recognized by iphoto or image capture
How do you import photos from Iphone 5 camera roll to iphoto?
-
Problem with hostname after enabling dhcp
i just installed a solaris10 non-networked because there was no network connection when i installed it. but recently, we were able to connect it to a network which required me to enable dhcp which i did with a sys-unconfig command. the problem is, th
-
Inventory Services does not start up
ZFD3.2 installed on "ZFD" resource in a 2-node NW6SP2 Cluster (SOU-SRV3 and SOU-SRV4) I have just installed ZFD3.2 with NCS. When I try to start the Inventory Service I get the following error message briefly displayed on the Server Console Screen: C
-
Newbie Video production synchronised with a tune (BPM/frame per beat)
Hello, I wish to throw my audio track on a timeline, and have a grid allowing me to see the rythm/beats... that way I can just throw video sequences, trim and loop with help of the grid to be perfectly synchronised with the tune! do you see what I me
-
I am trying Acrobat X on XP and 9 on Snow Leopard. Probably my question is one of FAQ, but I could not find a solution on the web. I would like to know if I can easily change the page size (dimension) of a PDF file. For example, I have a PDF whose d