Print prieview of the smart form

Can any one guide me how to see the print privew of LB_BILL_INVOICE

Attach your smartform to DRIVER PROGRAM "RLB_INVOICE" using nace transaction... in some cases functional team will do some config....
Example(rough)
Goto Transaction NACE --> Select Application V1(Sales) --> Click on Output Types --> Select the output type as BA00 (as generally BA00 is the output type associated with Sales Order ) --> Double click on the Processing Routines folder on the left and it will display the Form name and the corresponding driver programs name.
You can see the output using VF03 Tcode....
Close the thread once your question is answered and reward points to all useful answers..
Regards,
SaiRam

Similar Messages

Print Charts/Graphs on Smart Forms

Hi Seniors,
Here is a requirement on Smart Forms:
I need to print Charts on Smart Forms. I have been through many answers on SDN but unfortunately, there are not many appropriate solutions. I executed some standard reports and got Charts and graphs as output but am not able to use it to display the same on Smart Forms. I have even tried using classes for charts / graphs, business graphics(may be there would have been some sequential procedure for that).
In the Smart Form, I have tried Form Attributes>Output Options>Output Format--> XSF output
with output mode: 'Spool' and Output Device: 'XSFOUTDEV' from help.sap(I couldn't get what output device that was and was unable to execute).
I have tried executing transaction GRAL(demo reports for SAP graphics) too.
I found a report that would produce graph in Excel, I executed it, saved the graph from excel in '.bmp' format in SE78 and then printed it on Smart Form. But all I want is to have it done dynamically.
I saw answers that we can save the graph chart/graph onto the desktop, upload it and then display it on the Smart Forms. But, when i tried it, I saw that it could be saved only in '.dat' format. I have to save it dynamically in a supported format like '.bmp' and print it on the Smart Forms(the graph would change depending upon the input values). Please help me resolve this.
Thanks in Advance,
Chaitanya.

Dear Bouman,
Thank you for the reply. I can write a report if would helps me to upload images dynamically. I saw your program but, here we cant give the name of the chart that comes as output. I tried to save the chart but it comes in '.dat' format but not in '.bmp' format. We may be having some classes or function modules that we need to call in a particular sequence. What other options do we have. Please help me resolve this.
Regards,
Chaitanya.C.N

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

Problem in multiple printing in the Smart Forms

Hi Experts,
From the driver program I am passing Internal table with multiple records for employee,
But the smart forms is printing only single form for the employee.
Could you please suggest what need to be done in order to print multiple forms for employee.
Regards,
IFF

IF sy-tabix EQ 1 .------>only for first loop it will give dialog box
      CALL FUNCTION fm_name
        EXPORTING
          user_settings      = 'X'
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ELSE.
           c_par-no_dialog = 'X'.----
> if u set this then u will not get dialog box again and again
       out_opt-tdnoprev = 'X'.
        out_opt-tddest = job_out-tddest.
        out_opt-tdprinter = job_out-tdprinter.
      CALL FUNCTION fm_name
        EXPORTING
          control_parameters = c_par
          output_options     = out_opt
          user_settings      = space
          vbeln              = it_vbeln-vbeln
          pdf                = r2
          rbiclear           = c3
        IMPORTING
          job_output_options = job_out
          einv               = einv.
    ENDIF.

Printing Chinese Characters in Smart Forms

Hi,
Iu2019m trying to print Chinese characters via smart forms. However during print preview or print, all Chinese characters are showing as # symbols.
I have researched and implemented for some possible solutions posted in the forum like:
a.) Setting the regional language control panel.
b.) Activating the multi-byte function in I18N.
c.) Checked the output device is SWINCF.
d.) Control parameter language is ZH (Chinese).
Unfortunately it still doesnu2019t solve the problem. Any input is highly appreciated.
With regards,
Marc

Remark following basics:
Forms:
Language of the form must be: "ZH".
Due to a SAPNOTE only font family CN* (CNSONG etc.) is mapped.
For frontend print, you must install chinese true type on you local PC and print via "CNSAPWIN" .
For backend print, you must install neccesaary fonts in your printer to the resident fonts. You must use a printer like "CNHPL4" or so.
For PDF archiving, you must upload truetype fonts to application server -> basis guys.
Cascading Fonts:
If you mix different subfonts to unicode areas, you must use CNSAPWINCF.
Until now, only frontend printing is available.
Note:
Spool created for back end print with print preview is only a simulation of getting a picture of the output created with front end technology. So it can differ, when the printer does not have the resident fonts.
Regards,
Christian

How can i print currency symbol in smart form?

how can i print currency symbol in smart form?
i want to print the currency symbol with grant total based on the vendor currency.
pls hepl............

Hi,
think You can't print the symbols for currency like $ and Pound etc
see this doc if needed
A variable in SAPscript is called a symbol. There are the following types.
System symbol (e.g. the number of the current page)
Standard symbol (usable in any document)
Program symbol (value from the print program)
Text symbol (local variable)
The value of a symbol is text for using within SAPscript code and is represented by the symbol-name enclosed by ampersands. On seeing the tell-tale ampersands in SAPscript code, you sometimes need to figure out the symbol type.
goto any PAGEWINDOW's Text elements in Script (SE71)
from the Menu-> INSERT-> Symbols
you find all symbols here
System symbols
System symbols in a SAPscript form are comparable to system fields like SY-UZEIT in an ABAP program, and include these. The graphical editor offers three types of system symbol.
1. General system symbols
See the table TTSXY. PAGE is the most widely used. The list given in our BC460 training manuals is out of date.
2. SAPscript system symbols
See the dictionary structure SAPSCRIPT. SAPSCRIPT-FORMPAGES is the most widely used.
3. ABAP system symbols
For the ABAP system field SY-UNAME, say, the symbol is SYST-UNAME. http://SYST is the dictionary structure for ABAP system fields.
Sample code:
User: &SYST-UNAME&
Page &PAGE& of &SAPSCRIPT-FORMPAGES(C3)&
Standard symbols
Standard symbols are maintained centrally (in the table TTDTG via transaction SE75) for use in any document. Menu path:
Tools
Form Printout
Administration
Settings
Some standard symbols are SAP-standard and others are custom. Curiously, table TTDTG is cross-client although SAPscript forms are not.
The value of a standard symbol has to be defined for each language used. This gives a way to make a single SAPscript form multi-lingual.
We can take advantage to an extent of the central maintenance, though there is no guarantee that the available standard symbols will used in every appropriate context.
Standard symbols complicate searching a SAPscript form, since text like Charity registration 211581 may be hiding in a standard symbol.
Text symbols
A text symbol is declared and assigned to within the SAPscript code, and so obviously applies only to the current document. The command DEFINE is used, requiring /: in the tag column, as in the following examples.
/: DEFINE &COMP_NAME& = University of Warwick
/: DEFINE &WS_RATE& = &TAX_SUMM_C&
Reward points for useful Answers
Regards
Shiva Kumar

Driver program for the Smart form

Hi all.
I have an issue in smart forms.
we are implementing RE(Real Estate) module with the version ECC 6.0.
In the RE ,for printing the forms.I know the name of the SMART form only.
how can i know the corresponding Driver program.
Plaese help me to solve this issue.
Thanks on advance,
Regards,
Eswar

Hi,
You can get your driver program name from tnapr table but some are also configured from others way also.
Try this will work in any case.
Open your Smartform then execute.
Then function module name is displayed
Open function module and put a break point on first executable statement.
May be break point on statement like
CLEAR DOCUMENT_OUTPUT_INFO.
After giving breakpoint trigger your Smartform for printing in fresh session then it will stop in debug mode then in call tab you can see your driver program name.

How to debug the smart forms

Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.

Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish.

Print Vertical on a smart form

Hi All,
I want to print some dynamic text on the smart form, some part of it has to be printed vertically.
please suggest how to do that.
Thanks,
Pankaj Sharma

Hi!
The most, what Smartform can do for vertical printing (and SAPScript also) is to print like this:
H
E
L
L
O
W
O
R
L
D
Or you can scan vertical texts as an image and print them like a BITMAP.
Regards
Tamá

Print Bar code in Smart form

Hi,
Can you pls tell me how to print bar code in smart form?

Hi,
You create a bar code or change a bar code in the font maintenance transaction (transaction SE73). To do this, proceed as follows:
○ Start transaction SE73, and choose System Bar Codes ® Change.
○ If you create a bar code, the system asks whether you want to use the new bar code technology or traditional system bar codes. Choose New.
You can enter a name and a description for the bar code. Note that the name must begin with a Zto avoid conflict between your bar codes and the standard bar codes.
2. If you have created a new bar code, you must now add this to a Smart Style as a character format. For information about this, see the section Maintenance of Styles with the Style Builder and its subsections in the Smart Forms documentation.
If you have only changed the bar code, continue with the next step.
3. You can now select text in Smart Forms and choose the corresponding style with the bar code as the character format for this text.
4. You can then print the bar code.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10581664&messageID=3321556
Check the pdf below..
http://www.sap-press.com/downloads/h955_preview.pdf
Regards
Kiran
Edited by: Kiran Sure(skk) on Apr 10, 2008 11:01 AM

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

For this program i could send the smart form thru mail but in the inbox ..

*& Report ZSFOO
REPORT ZSFOO.
*& Report ZSFINV
TABLES : KNA1,         " General Data In Customer Master
         KNB1,         " Customer Master(Company Code)
         BSID,         " Accounting: Secondary Index for Customers
         ZSMARTFORM,   " Custom table for Storing Bank Details
         zsf_exp_inv, " Structure that stores required fields from all tables used
         KNVK.         " Customer Master Contact Partner
data : Begin of it_struct occurs 0.
        include structure zsf_exp_inv01.
data : End of it_struct.
types : begin of ty_bsid,
        kunnr like bsid-kunnr,
        WAERS like bsid-WAERS,
        XBLNR LIKE BSID-XBLNR,
        BUDAT LIKE BSID-BUDAT,
        WRBTR LIKE BSID-WRBTR,
        BUKRS LIKE BSID-BUKRS,
        end of ty_bsid.
types : begin of ty_kna1,
        kunnr like kna1-kunnr,
        NAME1 LIKE KNA1-NAME1,
        STRAS LIKE KNA1-STRAS,
        MCOD3 LIKE KNA1-MCOD3,
        LAND1 LIKE KNA1-LAND1,
        SORTL LIKE KNA1-SORTL,
        end of ty_kna1.
types : begin of ty_knb1,
        kunnr like knb1-kunnr,
        ZTERM LIKE KNB1-ZTERM,
        end of ty_knb1.
types : begin of ty_knVK,
        kunnr like kNVK-kunnr,
        NAME1 LIKE KNVK-NAME1,
        end of ty_knVK.
types : begin of ty_ZSMARTFORM,
        SNO      LIKE ZSMARTFORM-SNO,
        CURRENCY LIKE zsmartform-currency,
        BANKNAME LIKE zsmartform-bankname,
        ADDRESS1 LIKE ZSMARTFORM-ADDRESS1,
        ADDRESS2 LIKE ZSMARTFORM-ADDRESS2,
        ADDRESS3 LIKE ZSMARTFORM-ADDRESS3,
        ADDRESS4 LIKE ZSMARTFORM-ADDRESS4,
        ADDRESS5 LIKE ZSMARTFORM-ADDRESS5,
        ADDRESS6 LIKE ZSMARTFORM-ADDRESS6,
        VALIDFROM LIKE ZSMARTFORM-VALIDFROM,
        VALIDTO   LIKE ZSMARTFORM-VALIDTO,
        end of ty_ZSMARTFORM.
data : it_bsid type table of ty_bsid,
       it_kna1 type table of ty_kna1,
       it_knb1 type table of ty_knb1,
       it_zsmartform type table of ty_zsmartform,
       it_knVK type table of ty_kNVK.
data : wa_bsid like line of it_bsid,
       wa_kna1 like line of it_kna1,
       wa_knb1 like line of it_knb1,
       wa_zsmartform like line of it_zsmartform,
       wa_knVK like line of it_knVK.
*****************Selection Screen**********************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR,
                 S_belnr FOR BSID-belnr,
                 S_BUKRS FOR BSID-BUKRS,
                 S_CURR FOR ZSMARTFORM-CURRENCY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_PARAM OCCURS 0.
        INCLUDE STRUCTURE ZPARAMETERS.
DATA : END OF IT_PARAM.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SKIP 1.
Parameters : OPTION1 AS CHECKBOX,
             P_POINF(300) type c,
             OPTION2 AS CHECKBOX,
             P_DESC(300) TYPE C,
             OPTION3 AS CHECKBOX,
             P_MONTH(200) TYPE C,
             OPTION4 AS CHECKBOX,
             P_RATE(100) TYPE C.
SELECTION-SCREEN END OF BLOCK B2.
**********************PARAMETERS***********************************
data : l type i,
        Y(300) type c,
        j type i,
        k type i value 1,
        s type i,
        m(300) type c,
        p type i,
        z type i.
data : l1 type i,
        Y1(300) type c,
        j1 type i,
        k1 type i value 1,
        s1 type i,
        m1(300) type c,
        p1 type i,
        z1 type i.
data : l2 type i,
        Y2(300) type c,
        j2 type i,
        k2 type i value 1,
        s2 type i,
        m2(300) type c,
        p2 type i,
        z2 type i.
data : l3 type i,
        Y3(300) type c,
        j3 type i,
        k3 type i value 1,
        s3 type i,
        m3(300) type c,
        p3 type i,
        z3 type i.
IF OPTION1 = 'X'.
concatenate P_POINF ',' into P_POINF.
l = strlen( P_POINF ).
do l times.
    Y = P_POINF+j(k).
    case Y.
      when ','.
        m = P_POINF+s(z).
        s = j + 1.
        z = -1.
        p = p + 1.
        if p = 1.
          IT_PARAM-LINE1 = m.
        endif.
        if p = 2.
          IT_PARAM-LINE2 = m.
        endif.
        if p = 3.
          IT_PARAM-LINE3 = m.
        endif.
     when '.'.
        if p = 4.
          IT_PARAM-LINE4 = m.
        endif.
    endcase.
    j = j + 1.
    z = z + 1.
enddo.
ENDIF.
IF OPTION2 = 'X'.
concatenate P_DESC ',' into P_DESC.
l1 = strlen( P_DESC ).
do l1 times.
    Y1 = P_DESC+j1(k1).
    case Y1.
      when ','.
        m1 = P_DESC+s1(z1).
        s1 = j1 + 1.
        z1 = -1.
        p1 = p1 + 1.
        if p1 = 1.
          IT_PARAM-LINE5 = m1.
        endif.
        if p1 = 2.
          IT_PARAM-LINE6 = m1.
        endif.
        if p1 = 3.
          IT_PARAM-LINE7 = m1.
        endif.
     when '.'.
        if p1 = 4.
          IT_PARAM-LINE8 = m1.
        endif.
    endcase.
    j1 = j1 + 1.
    z1 = z1 + 1.
enddo.
ENDIF.
IF OPTION3 = 'X'.
concatenate P_MONTH ',' into P_MONTH.
l2 = strlen( P_MONTH ).
do l2 times.
    Y2 = P_MONTH+j2(k2).
    case Y2.
      when ','.
        m2 = P_MONTH+s2(z2).
        s2 = j2 + 1.
        z2 = -1.
        p2 = p2 + 1.
        if p2 = 1.
          IT_PARAM-LINE9 = m2.
        endif.
        if p2 = 2.
          IT_PARAM-LINE10 = m2.
        endif.
        if p2 = 3.
          IT_PARAM-LINE11 = m2.
        endif.
     when '.'.
        if p2 = 4.
          IT_PARAM-LINe12 = m2.
        endif.
    endcase.
    j2 = j2 + 1.
    z2 = z2 + 1.
enddo.
ENDIF.
IF OPTION4 = 'X'.
concatenate P_RATE ',' into P_RATE.
l3 = strlen( P_RATE ).
do l3 times.
    Y3 = P_RATE+j3(k3).
    case Y3.
      when ','.
        m3 = P_RATE+s3(z3).
        s3 = j3 + 1.
        z3 = -1.
        p3 = p3 + 1.
        if p3 = 1.
          IT_PARAM-LINE13 = m3.
        endif.
        if p3 = 2.
          IT_PARAM-LINE14 = m3.
        endif.
        if p3 = 3.
          IT_PARAM-LINE15 = m3.
        endif.
        if p3 = 4.
          IT_PARAM-LINe16 = m3.
        endif.
    endcase.
    j3 = j3 + 1.
    z3 = z3 + 1.
enddo.
ENDIF.
APPEND IT_PARAM.
select * from kna1 into corresponding fields of table it_kna1 where kunnr in s_kunnr.
select * from knb1 into corresponding fields of table it_knb1 for all entries in it_kna1 where kunnr = it_kna1-kunnr.
select * from bsid into corresponding fields of table it_bsid for all entries in it_kna1 where kunnr = it_kna1-kunnr and belnr in s_belnr and bukrs in s_bukrs..
SELECT * FROM KNVK INTO CORRESPONDING FIELDS OF TABLE IT_KNVK FOR ALL ENTRIES IN IT_KNA1 WHERE KUNNR = IT_KNA1-KUNNR.
select * from zsmartform into corresponding fields of table it_zsmartform .
DATA : AMT LIKE SPELL.
loop at it_bsid into wa_bsid.
read table it_kna1 into wa_kna1 with key kunnr = wa_bsid-kunnr.
read table it_knb1 into wa_knb1 with key kunnr = wa_bsid-kunnr.
read table it_zsmartform into wa_zsmartform with key CURRENCY = wa_bsid-WAERS.
READ TABLE IT_KNVK INTO WA_KNVK WITH KEY KUNNR = WA_BSID-KUNNR.
it_struct-name1 = wa_kna1-name1.
it_struct-stras = wa_kna1-stras.
it_struct-mcod3 = wa_kna1-mcod3.
it_struct-land1 = wa_kna1-land1.
it_struct-sortl = wa_kna1-sortl.
it_struct-zterm = wa_knb1-zterm.
it_struct-xblnr = wa_bsid-xblnr.
it_struct-currency = wa_zsmartform-currency.
it_struct-currency = wa_bsid-waers.
it_struct-budat = wa_bsid-budat.
it_struct-BANKNAME = wa_zsmartform-BANKNAME.
it_struct-ADDRESS1 = wa_zsmartform-ADDRESS1.
it_struct-ADDRESS2 = wa_zsmartform-ADDRESS2.
it_struct-ADDRESS3 = wa_zsmartform-ADDRESS3.
it_struct-ADDRESS4 = wa_zsmartform-ADDRESS4.
it_struct-ADDRESS5 = wa_zsmartform-ADDRESS5.
it_struct-ADDRESS6 = wa_zsmartform-ADDRESS6.
it_struct-CURR = WA_BSID-WRBTR.
IT_STRUCT-NAME = WA_KNVK-NAME1.
IT_STRUCT-AMOUNT = IT_SPELL-AMT.
append it_struct.
endloop.
data : x type i,
       x1 type i,
       a type string.
loop at it_struct.
x = strlen( it_struct-curr ).
x1 = x - 3.
a = it_struct-curr+0(x1).
CALL FUNCTION 'SPELL_AMOUNT'
      EXPORTING
        AMOUNT          = a
CURRENCY        = ' '
FILLER          = ' '
LANGUAGE        = SY-LANGU
      IMPORTING
        IN_WORDS        = AMT.
EXCEPTIONS
NOT_FOUND       = 1
TOO_LARGE       = 2
OTHERS          = 3
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
endloop.
DATA: ws_ucomm LIKE sy-ucomm.
DATA: form_name TYPE rs38l_fnam.
DATA: wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop.
data : i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
      i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: t_otfdata TYPE ssfcrescl,
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
      i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data : wa_objhead TYPE soli_tab,
wa_doc_chng typE sodocchgi1,
      w_data TYPE sodocchgi1,
      wa_buffer TYPE string,
      v_len_in LIKE sood-objlen,
      v_len_out LIKE sood-objlen,
      v_len_outn TYPE i,
      v_lines_txt TYPE i,
      v_lines_bin TYPE i.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE string.
DATA: w_bin_filesize TYPE i.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000001'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IN_WORDS = amt
importing
job_output_info = t_otfdata
TABLES
I_ZSF_EXP_INV = it_struct
I_ZPARAMETERS = it_param.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = w_bin_filesize
CODEPAGE = ' '
filename = 'c:     est59.PDF'
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = t_pdf_tab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10
IF sy-subrc <> 0.
*You should include message-id in the report heading
WRITE : sy-subrc.
ELSE.
WRITE : 'File Test.pdf downloaded succesfully'.
ENDIF.
loop at t_pdf_tab.
    translate t_pdf_tab using '~'.
    concatenate wa_buffer t_pdf_tab into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
    i_record = wa_buffer.
    append i_record.
    shift wa_buffer left by 255 places.
    if wa_buffer is initial.
      exit.
    endif.
enddo.
Attachment
refresh:
    i_reclist,
    i_objtxt,
    i_objbin,
    i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'O'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Hazard report-' p_load '.pdf' INTO i_objpack-obj_descr.
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-obj_descr = 'test'.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
     i_reclist-express = 'X'.
i_reclist-rec_type = 'U'.
append i_reclist.
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              document_data              = wa_doc_chng
              COMMIT_WORK = 'X'
              put_in_outbox              = 'X'
         TABLES
              packing_list               = i_objpack
              object_header              = wa_objhead
              CONTENTS_BIN               = i_objbin
              contents_txt               = i_objtxt
              receivers                  = i_reclist
         EXCEPTIONS
              too_many_receivers         = 1
              document_not_sent          = 2
              document_type_not_exist    = 3
              operation_no_authorization = 4
              parameter_error            = 5
              x_error                    = 6
              enqueue_error              = 7
              others                     = 8.
for this program i could send the smart form thru mail but in the inbox i could not
download it it says needed to be decoded properly.file not starting with pdf....
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'POPUP_TO_INFORM'
       EXPORTING
         titel = 'Mail sent'(003)
         txt1 = 'The report is sent via e-mail.'(004)
         txt2 = ' '.
     LEAVE PROGRAM.
   ENDIF.

hi krishna,
u r right. there is no error in sending the mail and the file but the problem is that file created and converted to pdf is not done properly.jst verify whether the file is created properly or not .thats the only problem that can occurs else ur program is absolutely right.

How to find the program name of the smart form?

How to find the program name of the smart form if output type is not known?
thanks in advance...

How to find the program name of the smart form if output type is not known?
thanks in advance...
T-code SE16
Enter table name: TNAPR -> Press enter key
Enter smartform name in input field(SFORM): Z_your_smartform_name
Execute
you can find program name under the column PGNAM/Program name.
Regards
sudheer

Where the smart forms stored in Package

Hi,
Where the Smart forms are stored in package,
In package only following option is there,
1.Dictionary Object.
2.Programs,
3.Includes,
4.Transactions,
5.Message class.

Hi Udaya,
When you activate a smartform a function module is generated, so smartform is nothing but a function module.Once your smartform is activated, run it check the function module name.When you activate a smartform it generates a function module in a function group the name of both will be same.
Go to SE80 select function group and give the name of function module since both are same.You will be able to view your smartform.
regards,
Nikhil Moghe

I'm using the latest version of firefox, but unable to print any downloads. I've tried using the print icon on the downloaded form and also control P

I've tried using the print icon on the downloaded form and also control P, but only get a blank page. I've even changed printers, but it didn't help. My print menu looks the same and I do not have trouble printing anything else, only with downloaded files.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Print prieview of the smart form

Similar Messages

Maybe you are looking for