Print problem after exporting Pages to PDF.

I am attempting to print a very large genealogical book (300 + pages) of my family's descendants and noticed that in both Preview and Adobe Reader the first character of every page is missing. This does not happen when printing from Pages so it cannot be a printer problem. I checked the placement of the print against the Pages page and both Preview and Adobe Reader are EXACTLY the one character difference with the pages exactly even with each other. The original page type is 12 pt with margins: Left .5in, Right .5in, Top .75in, Bottom .75in, no header, Footer .5in using 9 pt type. What is really odd is that the onscreen display is correct but only the printed (HP OJ6500E702n wireless duplex marginless printer) copy is incorrect which indicates to me the conversion is somehow creating this problem.
I need this PDF file as it is the file I print from plus I put the file on a disk as a backup for the paper book for all book recipients.
Sparkgapper

While this problem is for ANY application that EXPORTS, not prints, to a PDF format, I have discovered that the problem is probably be with the printer's minimum allowable margins being physically the same regardless of portrait or landscape instead of the logical rotation of margin type locations in landscape mode. Question answered by logic research.
Sparkgapper

Similar Messages

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Printing Problems after Reader 10 install

Recently deployed Reader 10 to about 300 workstations using Group Policy. Several machines are no longer able to print to some of the network printers. These printers are HP printers using the Universal Print Driver. When trying to print we get an error and the Adobe Reader application crashes. It will however print to other network printers that are using an older device specific driver, printing to the same print device. Have downloaded the latest HP driver, but it has not helped the situation. The printing worked fine with Reader 8 and Reader 9.   Anyone with an Idea?

Sorry only know Windows: Edit (menu)>Preferences>General>Application Startup>Enable Protected Mode at startup.
Wayne Capra
Date: Wed, 26 Oct 2011 10:37:59 -0600
From: [email protected]
To: [email protected]
Subject: Printing Problems after Reader 10 install
    Re: Printing Problems after Reader 10 install
    created by Al1iOop in Adobe Reader - View the full discussion
I am using a Mac 10.6 and cannot find the "Enable protected mode at startup" in General or any other options. Does anyone have an answer for Macs? Thanks.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3991540#3991540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3991540#3991540. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Printing multiple slides per page for pdf

Hey guys. I just downloaded 10.10.1 and I'm unable to print multiple slides per page for my pdf files. Usually before I print, I can choose an option if I want to have 4 or 6 slides per page printed (as this helps to save paper and is how I have my notes for school). But now, it says "copies per page" instead of "slides per page". So the print preview shows the same 1 slide printed 6 times on each paper, instead of 6 different slides on 1 paper (which what is what I was able to do before I downloaded Yosemite).
Does anyone know how to print multiple slides per page for pdf files???

Did you try the Layout panel? Page per sheet?

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Printer Problems after upgrade to Lion

Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

Hi Paul,
Been away and just got back to this issue.
Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
Thanks for your assistance in this issue.
Regards,
Mike, Rustington.

Acrobat 9 pro 9.4.5-printing problem after 6/8/2011update? 35mg pdf now creates 922mg print file

sent 35 mg pdf to printer sometime after 6/8/2011. file took long time to print, when I opened printer dialog box, it showed the file was 922 mg. Don't know if it was the update, but had no problem printing the same file before the update. Have windows xp pro. Another person in my office having same problem. Any ideas?

Having the exact same issues hear. Haven't been able to find a fix for it anywhere. It has the be the last update. Going to check if I can roll back to the previous update.

RGB color in inDesign changes (washed out) after exporting it to PDF

Hi,
I am new to InDesign and i have a hard time figuring out how could I export my InDesign file to PDF without affecting the color.
This is what I do.
1. I created a new document with Transparency Blend Space set to Document RGB
2. I created a box using the rectangle tool and filled it up with RGB color, R=126 G=12 B=110
3. The color in Indesign is just how i wanted it, however, the problem arises when i export the file now to PDF
4. Instead of the color i wanted, the color was changed to a lighter color, or washed out.
5. THis happens even in text have the same RGB setting.
How could I export it to PDF with the same color, without being washed out?
I really appreciate your help on this. Thanks.

That sounds like the Color Picker, which works a bit differently in ID than in Illustrator or Photoshop. If the cursor is not in one of the RGB fields when you say OK you won't get RGB color. You can see this by noting the text in the Add ... Swatch button. My guess is you added the color as the CMYK conversion which is a bit lighter.
You might want to use the panel menu in the Swatches panel instead, or the new swatch button at the bottom of the panel while holding down the Alt key to open the new swatch definition dialog. You want to create a Process color and change the type to RGB, then enter the values in the RGB fields. Or if what you want is really Pantone 249U you can define a Spot swatch and choose Pantone Solid Uncoated and then specify the 249. I'll warn you though, that CS6 uses Lab values for displaying spot colors and 249U is considerably lighter than either the RGB you specified or the 249C. In earlier versions the book value conversions were used. Even when using Lab display values through Ink Manager in CS5, the coated and uncoated swatches incorrectly look the same in ID, and in Illustrator CS5 you would need to turn on overprint preview to see a difference.
Here are a couple of screen captures from PDFs exported from ID CS5 and CS6 using High Quality Print. The colored boxes with the lables were pasted from Illustrator CS5 to be sure I was using the same color definitions and that theywere behaving as native objects. Below are the same boxes placed:
and here is how the screen looked in CS6 in ID (notice the difference in the placed .ai file -- the screen preview is NOT using the Lab values, although it exports with them):
I don't know what the content is and how you present it, but it doesn't sound like a web page. That said, if you choose Web for intent in Document Setup you can still use print size paper sizes for the document and change the rulers after the doc is created to read inches or millimeters or other units of your choice instead of pixels and the file will use default RGB swatches and default to RGB when making new colors.

Printing issues after export

The newsletter we publish, would not print the third page in the PDF version we published. I exported as an interactive PDF, and once I exported as a PDF for print it resolved the issue. My problem is that I'm not sure why it would print the first two pages and not the last (if it was an export problem), and also since we do utilize many interactive features these get lost if exported for print. The users mostly access our newsletter via email and web, however many print to use as references. So I need to find a happy medium to satisfy both uses. Any advice?

katiefinn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

Hi,
I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.

This patch did solve our problem with the K5400 feeding a "blank sheet".
Thank you.

Problems to export logo in PDF

Hello experts.
I have a problem to export a logo logo.bmp to pdf in a web application designer 7.0
Source XHTML is:
<img src="bwmimerep:///sap/bw/mime/Customer/Images/LOGO.bmp" border="0" />
If I execute the WAD logo appears in the screen. But when I press print button to export the document to PDF format the logo does not appear.
Can you help please?

I have resolve then problem with a logo.gif.
logo.bmp or logo.jpg not works.
Thanks.

Printing problem after installing Adobe Reader XI.

After installing Adobe Reader XI. I can not just print a document from email attachment without saving it to a "save the file as". Where before was able to just print the document. There is no reason I need to save these documents being printed. How do I get back to an older version that allowed me to do this?

Thanks for your response. I found the problem 1/2hr after posting my question. It had to do with the setting after hitting the print que. After installing the Adobe Reader XI the setting for destination in the print window change to save as PDF. Before it was set to my default printer. I never knew that there was other places for these documents could go. Never had to use them either.
Again thanks for responding.

Right-page graphic overflow printing on blank left page in pdf

Hi, I have a document with facing pages. There is graphical content on the right page that consists of several images in a grid and is rotated slightly. When I export to pdf, the part that sticks out over the left side of the page gets 'printed' on the left page in the pdf, which I want to appear blank. How can I avoid this? Much appreciated.

Fair enough. I guess it's doing what it's supposed to be doing. One way I avoided the overlap without touching the right-page graphic was splitting the pages using a script. I have to do that anyway, since my pdf is interactive, and for some reason such pdfs automatically print as spreads, which I don't want. d'oh. Thanks for your help.

Print problem after exporting Pages to PDF.

Similar Messages

Maybe you are looking for