Print problems only pictures are print not text

Macbook air with caonon mx870.
fonts (text) are not printing anymore only pictures ?

Hello there, marcvdw.
The following Knowledge Base article offers up some great steps for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

Canon ir 2420 ufrii LT network printer show only processing but print not receive

My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share , Thaks for you support

I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries)

Pictures are printed on the edge of the paper using ipad with iOS 7

Pictures are printed near the edge of the paper instead of being printed on the center of paper. Using ipad 2 with ios 7 and hp 3520.
Can anyone suggest anything to fix this issue.
Thanks in advance !

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

Canon MG6220 wierd zooming/cropping printing problem, only when printing with Windows XP?

The printer in question is a Canon Pixma MG6220, connected to a WindowsXP printer. I've printed this same document on a Brother laser printer, that is connected to the same computer, and it prints correctly. I've printed this same document on a Epson inkjet printer, and it prints correctly. I've printed this same document at Staples, on one of their big laser printers, and it prints correctly. So, this printing problem is only occurring with this Canon printer. One other thing that may help you with this, is that last night I moved this Canon printer to another computer, except this one had Windows 7 on it, and it printed flawlessly! So, it seems that it may have something to do with Windows XP printer driver.
I'm printing a one page document from Word 2002 which consists of about 10 pictures, no text. All the pictures on the page are the same height but a different width. When I print the document, some of the pictures print correctly and some of them do not.
Essentially, what is happening is that some pictures are zoomed in about 50%, yet still print in the same area that is set in the document. So, the image looks like it has been rudely cropped.
The oddest thing is that this only happens to some of the pictures. There is nothing special about these pictures. The pictures that print correctly are from the same source as the ones that don't print correctly. I’ve done other Word documents like this, with the same format but different pictures, and they printed wrong too, some pictures correct and some zoomed/cropped.
Here is a summary of the pictures from the files I attached, and which ones printed correctly, and which did not: The first one is a screen capture of the Word document, and the other is a scan of the printed document.
Row 1
    Pic 1 – error (zoomed/cropped), Pic 2 – error, Pic 3 – correct, Pic 4 – error
Row 2
    Pic 1 – correct, Pic 2 – correct, Pic 3 – correct
Row 3
    Pic 1 – error, Pic 2 – error, Pic 3 – correct, Pic 4 – error
Row 4
    Pic 1 – error, Pic 2 – error, Pic 3 – correct
One observation of the incorrectly printed pictures, is that the upper left corners appear unaffected. It is the lower right corners that get the weird zooming/cropping effect.

Urgently restore a backup of the registry.
Urgently do not use the word 'urgently' in a forum of volunteers.
Also it can not be urgent, as Forms 4.5 dates from the Flintstone age, and probably isn't even certified on XP.
However, the error message is very clear: Apparently Forms 4.5 uses the registry to store printer info: you need to get that entry back. That kind of info is usually documented. Documentation is likely still online.
Sybrand Bakker
Senior Oracle DBA

Duplex printing problem in Word 2010 but NOT in Excel 2010

At the risk of repeating an old question :
I have Windows 7 Pro, Office Professional 2010 and an HP Officejet Pro 8600 Plus and two sided printing is a problem in Word.
Excel prints in Duplex by selecting "Print on both sides / Flip pages on short edge".
Word, though, with the exact same Setting, fails and the document is printed one two sheets of paper ... one side only. Seems rather bizarre.
Help would be appreciated.
Neil

Hi,
Which Word 2010 version do you use? Please try the Word 2010 14.0.4760.1000 version(We may upgrade or downgrade the version by install or uninstall the patches).
Next, we may try the workarounds which provide by other communicators, I copied here:
Workaround1:
File then Print
Go ahead and select manual print on both sides
Go to page setup, print options, and the advanced tab. Go all the way down and select "Print on the front of the sheet for duplex printing."
After printing the first set, I was able to just turn it 180 degrees and it worked just fine.
Workaround2:
As a work around I found if I ignore Words "Settings" and instead go into my printer properties, select the Finishing Tab, and select "Print on Both Sides (Manually)", the document will duplex print correctly. Requires 5 steps instead of 3
Quote From:
http://social.technet.microsoft.com/Forums/office/en-US/b948525f-be7e-453c-9477-8a467852d360/duplex-problem-in-word-2010?forum=word
Regards,
George Zhao
TechNet Community Support

Printing Problems with PS CC, but not CS5 or CS6

When printing from PS CC using the print dialogue box I am getting a severe red shift in the final print. When I print the same image from PS CS5 or CS6 I get a color-correct print.
I am running a MacPro with OS 10.7.5, and printing to a Canon iPF8300 with its latest firmware and print driver. I am using the proper ICC profile for the paper. In the print dialogue box, I select "Photoshop Manages Colors".
A couple things I noticed:
In the "Print Settings" where I dial in the printer setup, the settings for "Color" are both turned off (Colorsync & Vendor).
In the printer driver settings (still within "Print Settings") the "Color" tab is grayed out, but when I click the "Settings" for that sub-panel, Colorsync is selected.
When I printed the image from the Canon PS Plug-in, the red cast was gone, but the blacks were too heavy (there is no "Black Point Compensation" check box available because the Canon plug-in uses Adobe Color Engine for that, and it's only 32-bit and won't run).
Any advice or insight would be appreciated.

I see the new/hacked AppColorMatchingInfo.xml file includes PS CC, v14.0.0.221
Here's a clip from the info.plist file inside PS CC:
</array>
          <key>CFBundleExecutable</key>
          <string>Adobe Photoshop CC</string>
          <key>CFBundleGetInfoString</key>
          <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
          <key>CFBundleIconFile</key>
          <string>PS_AppIcon.icns</string>
          <key>CFBundleIdentifier</key>
          <string>com.adobe.Photoshop</string>
          <key>CFBundleInfoDictionaryVersion</key>
          <string>6.0</string>
          <key>CFBundleLongVersionString</key>
          <string>14.0 (20130423.r.221 2013/04/23:23:00:00)</string>
          <key>CFBundleName</key>
          <string>Photoshop</string>
          <key>CFBundlePackageType</key>
          <string>APPL</string>
          <key>CFBundleShortVersionString</key>
          <string>14.0.0</string>
          <key>CFBundleSignature</key>
          <string>8BIM</string>
          <key>CFBundleVersion</key>
          <string>14.0.0.221</string>
          <key>CGDisableCoalescedUpdates</key>
          <true/>
          <key>CSResourcesFileMapped</key>
          <false/>
          <key>DTCompiler</key>
          <string>com.apple.compilers.llvm.clang.1_0</string>
          <key>DTPlatformBuild</key>
          <string>4E2002</string>
          <key>DTPlatformVersion</key>
          <string>GM</string>
          <key>DTSDKBuild</key>
          <string>11D50a</string>
          <key>DTSDKName</key>
          <string>macosx10.7</string>
          <key>DTXcode</key>
          <string>0432</string>
          <key>DTXcodeBuild</key>
          <string>4E2002</string>
          <key>LSMinimumSystemVersion</key>
          <string>10.6.0</string>
          <key>NSAppleScriptEnabled</key>
          <string>Yes</string>
          <key>NSHumanReadableCopyright</key>
          <string>Copyright © 1990-2013 Adobe Systems Incorporated</string>
          <key>NSPrincipalClass</key>
          <string>PhotoshopNSApplication</string>
          <key>UIDisallowUserKeyboardShortcuts</key>
          <true/>

Pictures are printing very dark

I HAVE A OFFICEJET 7680 AND PICTURES (JPEGS) THAT I PRINT FROM MY HP COMPUTER ARE COMING OUT VERY DARK. THERE IS NO ISSUE WHEN THEY ARE PRINTED AT A LOCAL STORE.......

What model of printer are you using and how are you printing the photos?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Printing Problems with Epson R200 Printer

When I try to print from Aperture my prints come out "flat" and the colors are off. When I export the the same file to PS Elements 4.0 my prints come out great. I would prefer to not have to do this. Here is some background information on what I have tried to do so far to correct this problem:
1. I have searched this forum backwards and forwards to try and find an answer - no luck!
2. Purchased a Spyder2 monitor calibrator
3. Wasted a lot of paper trying various settings.
4. Yes - I have read the two articles on the Aperture site regarding printing and calibration. I have followed both of these articles and still get poor prints when printing from Aperture.
5. I have met with the genius at my local Apple Store to work through the problem. He informed me that he only prints from Photoshop and did not really know how to solve my problem.
6. Purchased the Aperture 1.5 book from Apple to see if I could find out anything else that I had not already tried.
Help please, what am I missing? It seems to me that all of the books written on Aperture stress printing books and not photo prints as their main area on printing. Can I get the same results printing from Aperture as I can printing from Photoshop Elements?
Any suggestions would be greatly appreciated.
Randy
iMac 20" Intel Core Duo Mac OS X (10.4.9)
iMac 20" Intel Core Duo Mac OS X (10.4.9)

When I try to print from Aperture my prints come out
"flat" and the colors are off. When I export the the
same file to PS Elements 4.0 my prints come out
great. I would prefer to not have to do this. Here is
some background information on what I have tried to
do so far to correct this problem:
1. I have searched this forum backwards and forwards
to try and find an answer - no luck!
2. Purchased a Spyder2 monitor calibrator
3. Wasted a lot of paper trying various settings.
4. Yes - I have read the two articles on the Aperture
site regarding printing and calibration. I have
followed both of these articles and still get poor
prints when printing from Aperture.
5. I have met with the genius at my local Apple Store
to work through the problem. He informed me that he
only prints from Photoshop and did not really know
how to solve my problem.
6. Purchased the Aperture 1.5 book from Apple to see
if I could find out anything else that I had not
already tried.
Help please, what am I missing? It seems to me that
all of the books written on Aperture stress printing
books and not photo prints as their main area on
printing. Can I get the same results printing from
Aperture as I can printing from Photoshop Elements?
Any suggestions would be greatly appreciated.
Randy
iMac 20" Intel Core Duo
Mac OS X (10.4.9)
iMac 20" Intel Core Duo Mac OS
X (10.4.9)
I'll attempt to answer my own question. After much trial and error along with a lot of wasted paper and ink I have found the source of the problem. Aperture works exactly like it should if you follow Apple's recomendations for printing. My problem was that the profiles supplied for my printer by Epson are horrible! I purchased a Spyder 2 Suite screen calibrator to try and fix this problem and did not have any luck until I ran the included Print FX software and created a new profile for my printer (Epson R200). The prints are now coming out great and virutally indistinguishable from those printed via Photoshop Elements. The clue to fixing this is that when I turned on "on-screen" proofing and selected my old printer profile the output did match the screen. Unfortuntely the screen images were not using the full gamut of color (hence the flat pictures) because it was gettting it's information from the Epson ICC Profile. In summary, if you are suffering from this problem find a way to create your own profile for your printer. There are expensive methods which involve purchasing a spectrophotometer. I took the middle of the road route and created a profile using a software only profiler (Print FX). I'm sure that depending on your printer you could download a better profile on the web. Either way you get it done you'll be happier. NOTE: I guess some printers come with better profiles than others which would explain why some people don't have any problems.
iMac 20" Intel Core Duo - 2GB RAM Mac OS X (10.4.9)

PDF Printing Problem with HP UPD Printer

Hi,
in our Company we use the HP UPD Driver PCL5 in Version 5.9.0.18326. The Printermodells are HP LaserJet Pro 400 M401, HP LaserJet Pro 400 Color M451, HP LaserJet Enterprise Flow M830z, HP LaserJet Enterprise 500 MFP M525dn, HP LaserJet Enterprise M630dn, HP LaserJet Enterprise Flow M680z and HP LaserJet Enterprise Flow M880z with newest Firmware.
If a PDF file is printed using Adobe Reader, it takes a long time until the file is printed on the printer. Partially individual pages are printed in one-minute intervals. But if I use another PDF viewer such as Foxit Reader, PDF documents can be printed at normal speed.
Other documents, such as Word or Excel files are printed normally. Only PDF documents that are printed with Acrobat Reader or Adobe Acrobat are affected. We use the Acrobat Reader version 11.0.10. With version 11.0.6, the problem also occurs.
Sometimes it also happens that the PDF document fills up the memory of the printer when it was printed with Adobe Reader. With Foxit Reader this does not happen with the same document.
Does anyone know this problem and knows what to do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Reader 10.0 Printing Problem - Font changing while printing

Dear all,
can anybody help me on my printing problem with Adobe Reader 10.0 ?
While printing a pdf I cannot do anything else, it is not possible to touch the mouse
because when I do this, the font is changing while printing to something like grecian.
Can somebody help me on this ?
Reader 9 did not cause this problem.
Thanx and best Regards, Travelplan24

I have the same problem, but I didn't realize it could be set off by my working on another task. It is also triggered when the pdf has scientific notation, or a very extreme change in font and font size. E.g., text in boxes, algorithms, etc. seem to trigger the problem.
I have reinstalled my print driver (several times, latest on Sunday), and reinstalled Adobe Reader (now 10.0.1) but the problem remains.
Printer:
HP Officejet 6500 (E709n Series) wireless, now on USB.
Document properties: Most recent font conversion - yesterday:
Producer: Distiller 4.0.2 for Mac
PDF version: 1.3 (Acrobat 4.x)
Fonts: Helvetica-Neue, Type 1, Encoding: ANSI and Roman
The font is not converting into Greek. E.g. "Problem-Solving Process" became "Qspcrfm . Tpnwjoh!Qspdftt"' with the kerning overlapping characters.
The font 'conversion' has happened many, many times on a wide variety of pdf files in the past 6 months. Never had the problem before. I had downloaded new Reader, and purchased the new printer -- I do not know which change created the problem.
I will cease doing anything when I print as a temporary workaround, but that is not a good solution.
I sure hope you can figure out what the bug is. Thanks in advance.

Printing problems with a shared printer on home network

Hi
I just upgraded all my Macs to Tiger. We have been running Panther very smoothly since it came out. We have a small home network running on a standard hub. The USB printer is attached to one of my G4s, and the rest of the network uses this as a printer connection.
I've been successfully printing to our HP 920C printer from all my programs for years now. Now that I've gone to Tiger, my printer Utility sees and registers the printer, but when I try to print to it from any of the Apple text programs, there is no response. I print from Illustrator with no trouble at all. TextEdit for example, sees the printer, but when I click the "PRINT" button from the print dialogue nothing happens. I am wondering why this is.
To note: I have added a line of code to the Terminal, which unblocks the system for Adobe Distiller to create PDFs (sudo killall -HUP cupsd). This was reccomended by Adobe with Panther in order to bypass a PDF function whithin Panther. I wonder if it was a mistake to add it to Tiger, and that it is this that is blocking TextEdit. If this is the case how do I remove the command, and reset the system to its default PDF setting.

It was a simple problem after all. Sadly my hard disc was about to snuff it. I changed disk, reinsalled Tiger and all is as smooth as ever.

Printing Problem in IW3D-Duplicate Printing of Codes

Hi Experts,
While Printing Orders in IW3D , for a Particular Equipment Category of Equipments with Catalog Profile, i am getting repeat ( 2 times) printing of all the Codes for the Code Groups of that Catalog profile be it Object Part or Cause Code etc.
Same Print Program and same Form is working fine with same category of equipments in another client.
Has anyone got such problem .
Am i missing some configuration
Thanks,
Manish

Hi Pete,
It doesnot duplicates the Print.It only duplicates the Codes for different catalogs which are a part of output in the print
Regards,
Manish

When printing from iPhoto picture is printing on the top corner with just 1/4 of the total photo

Can anyone point me to the settings that control printing final output? My photos are coming out cropped to the upper corner with only the first corner of the photo printing. All other printable programs turn out as they should. No printer issues; photos from card to pribnter print as they should.

Because you are printing a different size than the image - you give no details so one can only provide generalities
If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
Crop to the dimensions of the print - and you will lose nothing
LN

Printing Problem to Adobe PDF printer

When I print to my Adobe PDF printer I comes out unreadable, but if I copy the unreadable text and paste into word I can read it.
Unreadable text in Acrobat is in Courier, and readable in Acrobat is in Vernada (that's what is shows in word). Does anyone have any ideas?
Version Acrobat Pro 9.4.5

I talked with Adobe and they showed me an option for fonts (listed below). Uncheck the hightlighted option.
And now it prints correctly.

Print problems only pictures are print not text

Similar Messages

Maybe you are looking for