Print problems with my Photosmart D5360 in a network with Windows 7

My printer is installed on my desktop PC that runs on vista.
I have two notebooks too.
One is running on vista, the other runs on windows 7.
They are all connected in a wireless home network that seems to be perfectly ok.
With the notebook on vista I can perfectly print via the wireless network, but with the notebook that runs on windows 7 it is not possible to print. The Notebook gives no failure message and the printer just gives a blank paper with a "paper failure" message on the printer.
It seems to be a network problem or a mismatch between vista and windows 7.
Is there somebody who can help me with this issue?
Thanks,
Peter.

Hi IUHoosier,
(Is this your name?)
First of thank you very much for your reply.
May be I was not clear enough in miy explenation.
My photosmart D5360 is connected to my desktop PC with USB.
So it is not a networkprinter.
When I connect the notebook that runs on windows 7 directly to the printer with a USB connection than there is no problem, it prints perfectly. In this situation I use the printdriver for Windows 7 that I installed a few days ago on the notebook itselve.
So I have the latest drivers on all my computers.
However, when I want to print via the wireless home network and so via the desktop PC to which my printer is connected, I have to use the printdriver that is installed on my desktop PC (or not??) that runs with Vista. In this case it won't print.
My desktop PC doesn't allow to install a driver for Windows 7 because it runs on vista. And on my notebook thatruns on windows 7 I can't reach the printdriver instaaled on the desktop PC that I use to print wireless.
Maybe I am a bit clumsy with these things because my knowledge of networks is very basic I'm afraid.
The second link you gave me is in my opinion not useful for my situation? Or am I wrong?
Many thanks so far. 
Best regard,
Peter.

Similar Messages

  • Drivers for hp photosmart d5360 and laserjet 4000 in windows 7,needed

    i need the drivers for  hp photosmart d5360 and laserjet 4000  in windows 7
    i have install windows 7 ver 7260 and everything was working fine,,then i have updated to ver 7600
    and now my computer does not want to install the drivers,,
    any ideas why is not working?
    thanks

    It does not matter how we got Windows 7 RTM (7600). But if you have to know to answer the questions about drivers, then MSDN Subscribers and Technet Subscribers can download Windows 7 RTM as of August 7. I also have Windows 7 RTM and I now cannot install the HP Laserjet 4000N printer. It used to work with Windows 7 RC but now not with RTM. My printer is located on a Windows Server 2008 based computer. It properly browses and I I can select it from the server list of printers. But it then tells me that I dont have a driver. Where can we get a driver? HP will have the Windows 7 RTM version as well for their driver support.

  • Turn on icloud with my ipad, it spams my network with old meeting requests (2009). what gives?

    turn on icloud with my ipad, it spams my network with old meeting requests (2009). what gives?

    This happened to me (twice) when iCloud first came out -- and I have steered clear of iCloud ever since.  But I just recently upgraded to Mavericks, and they took local sync away!!  Anyone still having this issue with iCloud??  I will not send accepted messages for old meetings three times!

  • Printing problem on HP Photosmart C5280 All-in-One

    Hi,
    I'm trying to print a single page calendar but it's coming out with streaks in 3 places.  I tried 3x and the streaks are always in the same place.  I'm using Konica Inkjet Paper QP Premium Photo Glossy, which is supposed to be suitable for all modern inkjet printers.  Is this an ink problem, a printer problem or a paper problem?

    My guess would be a print settings issue.  I would suggest setting the media type to Photo paper rather than automatic and set the quality to "Best".
    If that does not help please provide more details - are the streaks at a consistent spacing?  Where are they on the page?  What color are the streaks?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printing problem on HP Photosmart Premium C309g-m

    Hi all,
    I am currently using HP Photosmart Premium C309g-m to print my documents and it runs on five different ink catridges. I usually print text documents using the black ink catridge. I realised that the moment the ink runs low(when they display the ! sign in the yellow triangle), the print out quality is significantly reduced in the sense that my text documents are printed with certain areas being missed out such as having half a line of text not being printed etc when my ink isn't even out or nearing to being completely out.
    Does anybody else experience this problem? Is this problem exclusive to this model or just this particular printer I am using? Is there any way I can go about solving this problem because essentially this means that I have to replace the ink catridges once they go low because I can't print a complete document at all! Thanks!

    Print a Wireless Network Test.
    I hope you are not using this for MAC filtering on your router.  It is pretty much a useless security method.
    Read more here.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Networking printer problem Win 7 64bit driver won't connect with win 32 bit

    HP 1320 installed on Win 7 64 bit with driver 1320 PCL 5 won't let win xp 32bit computer connect.  It's looking for NT print file.  I followed instructions to open a local port and it connects, but only prints blank pages. 
    New HP Computer found the printer driver which is different number PCL 5 from the original PCL 6.  So I loaded PCL 5 on xp computer.  Still won't print.
    Someone please give me a fix for this.  I posted this message on the troubleshooting page but got no response.
    I need HP support on this, PLEASE.

    Hi wiry11,
    HP LaserJet 1320 is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • C410 Wireless Printer keeps loosing its connection to my wireless network in Windows 7

    HP C410 Photosmart all-in-one wireless printer
    on a HP pavilion p6000 Desk top running Windows 7, with all the latest updates
    Every 3 or 4 weeks, the printer has to be reinstalled or I connect to the router with an either net cable,
    Currently the Desk Top can not find the printer on the net work, I have disabled the firewall, The printer is connected to the net work but I can't print thru the net work. I fixed the issue by using a trouble shooter that said I was missing a driver, but now I can't find the trouble shooter, and the HP trouble shooter is little to no help. I have used HPHNDU, which can't find the printer, but it can find the network, I have also tried HPPIW, and it is of no help. Lastly I have used the HP printer install Wizard and it has me deleting the printer and then it can't find the priner so you click the next button and you delete the printer again, ...
    Any assistance will be much appreciated, cause it is now a wired printer.

    ITried all the suggestions and downloads and I still have toconnect thru a wire. When the Desktop is performing the Network discovery and check, it says it can't find the Printer on the net work, yet the Network test report  has passes in all the categories and the signal strength  as excellent, so I guesithastoremain a wired connection. Because the next comment is its windows 7 tha is having the issue. Thanks for the suggestions they did not work...

  • Contract printing problem "Wrong price unit"

    Hello,
    I have created a Consignment contract item with target qty. There is no price neither price unit mentionned at this item
    When I have printed the output message the following data are displayed.
    material number : OK
    material description : OK
    value/price unit : NOK
    In fact, in the preview I get XX$/1KG instead of XX$/1000kg as mentionned in the info record
    When I check the contract language I find that it is different from the plant language  FR instead of EN.
    so I performed following tests:
    1- When creating a new  contrat with same values and I change the language key to EN===> there is no printing problem  "OK"
    2- When creating a new contract  with samevalues and I change keep langage as FR===> Printing a proble apperas in the price unit   1kg  instead of  1000kg   "NOK"
    PLease to advise about potential reasons

    I remark that the Key Language in the contract is different from the plant language:  
    I performed the following tests:
    1- When creating a new  contrat with same values and I change the language key to EN (the same as the plant language) ===>  It is working fin  "OK"
    2- When creating a new contract  with same values and I change keep langage as FR (different from the plant language) ===> Printing a problem occur  in the price unit   1kg  instead of  1000kg   "NOK"
    Please to advise about potential reasons

  • 10.6.8 Printing problem with HP Photosmart premium C310 printer

    I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
    I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
    It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask.  All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
    I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
    Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

    Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
    To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
    Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

  • HP Photosmart D5360 Printer stopped working with MAC once upgrade to SL?

    We have a networked (not wireless printer) HP Photosmart D5360 Printer, and it connected to a Windows PC, Under Leopard we were able to print via Network sharing the printer, however since we have updated to Snow Leopard we can no longer see or print to the printer... Even though all the Windows computers (PC's) can see it and print. Nothing has changed on the network, it just simply isn't being seen by SL on our Mac's anymore...
    We can see the workgroup and the computer, but it says it can't connect to the computer (a windows PC) anymore for some reason when while using Leopard we had no issues...
    Suggestions? Obviously an easy fix would be to get an Airport Express adapter and plug the printer in that way thus making it a wireless printer, however we would like to get it work without spending the $100 for the Airport Express if possible.

    NASCAR3D,
    I don't know if this will help, but if it doesn't we'll work through the issues.
    Step 1: Make sure the printer drivers on your Windows box are up to date. This step is important, since a driver mismatch could be the cause of your problem.
    Step 2: Open the Print & Fax System Preference, right click on your printer, and select "Reset printing system..."
    Step 3: Click the + button an the bottom of the now empty list, when the add printer window opens up, press the Windows button in the toolbar. Select your printer, and make sure the Print Using is NOT set to Generic PostScript. It should auto select your printer from the list. If not, make sure you pick it manually.
    If it still doesn't work let me know and we'll see what we can do.
    Just trying to help.
    Andrew

  • HP Photosmart Premium c309g wireless network printing problem with 64bit Windows 7

    A problem exists where the c309g is installed on a wireless network where one of the PCs on the network is running 64bit Windows 7.  Amongst other things, the printer may print very slowly, appear disconnected or unavailable through the HP Solutions Centre and may not be pingable from any of the PCs on the network.  The problem will affect ALL the PCs on the network !
     Network monitoring software will also show an enormous level of network traffic between the printer and the Windows 7 PC.  As soon as the Windows 7 PC is switched off, everything returns to normal. 
    The problem is solved by disabling the HP Network Devices Support Service on the Windows 7 PC as follows;
    Run services.msc from the Run command on the Windows 7 PC.  This will display the list of all the local services running on the PC together with Description, Status and Startup Type information for  each.
    Scroll down the list until you see the HP Network Devices Support Service.
    Right click on it and select Properties to bring up the Properties window.
    Use the dropdown list to Change the Startup Type to Disabled.
    Once disabled, the printer will start to work normally.  HP are aware of this problem which may be unique to the 64bit version of Windows 7.

    Thanks but no luck... I tried it..... Got back from son's baseball game.. checked on printer - as in tried to have printer print something... nothing...   prior to going out I went ahead and deleted the 6  c309 print devices and reinstalled a new one and got the printer to work...  after the game it was back to ignoring print commands...  When I go to printers there again are 6 print devices for this printer - one titled HP Photsmart Premium C309 g-m... then 4 copies of that and then one version titled HP0AC58C (HP Photosmart Premium C309g-m).
    As I just finished writting that... the printer came alive and started printing some previous jobs... so maybe it helped - not sure but what about the 6 versions of print devices?   I just checked the statuses of all the versions and the default is offline... the various copies have different amounts in que but have a pending status of pending deletion...  When I tried to make one of the other copies the default printer - it errors out with  0x00000709

  • Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

    Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
    iMac is connected via wirelss to printer/scanner. All was working OK until update.

    Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

  • Ink problem with HP Photosmart Premium Printer C309a

    I replaced the photo black cartridge with 564XL, and black will not print at all. Did I use the wrong cartridge. What else could be causing the problem?

    I replaced the photo black cartridge with 564XL, and black will not print at all. Did I use the wrong cartridge. What else could be causing the problem?

  • Borderless problem when printing with HP Photosmart K510A

    help me with this one HP support is closed today, are you experiencing this borderless problem if printing bordless a part of the image gets cut off when printing right now I'm printing in 4R the when I "print preview" the image is not cut off but when the actual output of print its cut off in all 4 corners maybe a few millimeters
    look at my watermark its cut off my aspect ratio is 3:2
    I printed it on a 4x6 paper (4R) they have identical aspect ratio I even tried to cropped to 4R still it gets cut off or is this an HP printer problem
    please help this is getting frustrating

    can anyone help me with this one?

  • Printing problem with Photosmart C4180

    Hello, I'm trying to print invitations on my Photosmart C4180.  I have a custom size of 6.25" by 6.25".  The directions on the invitations say I should manually feed the paper.  I can't find out how to do that.  Do you have any suggestions?  thank you very much!

    I would take a look at the document below it will show you how to remove jobs in queue.
    Click here for document.
    Let me know how it goes.

Maybe you are looking for