Print proofing in CS2 - different to results

Help!
Can anyone tell me what I might be doing wrong. I have a calibrated monitor and profiles for my printer and paper I am using. When I get a photo just right in Photoshop with the proofing on I then print with preview and what is shown is different, a lot darker and more contrasty. The "wrong" preview is what is actually pronted. It seems as though the print proofing is somehow not working. This is the same for all the printer profiles I have, even for on-line printers!. I have set that CS2 should control color management on the printer set up.
Help. I am pulling my hair out(what's left of it!)

Hi,
How is the PDF generated ? via external send in messages ? or by FM in print program ?
If it is via external send, the problem is with the device type used in SCOT. Please check
Regards
Seema

Similar Messages

Printing same document to different printers results in differint number of pages

Hello - when I print a form, created in a custom application, to an HP 1160, it prints on 4 pages. When I use the same computer and application to print the form to an HP 1320, it prints on 3 pages. The form was designed to print on 3 pages, and when I compare the 4 page printout to the 3 page printout, the font size on the 3 page printout is slightly smaller. Is there anything I can do, short of replacing my 1160 printers with 1320s?
Thank You

First of all, you can't use Adobe Reader to add, delete or duplicate pages in a PDF file (unless you use a template object), so you're either using Adobe Acrobat, or some other application entirely.
The size of PDF files is not linear, ie if you have 1-page file and it's 1 MB, then duplicating it will results in a 2-page file of 2 MB, or a 10-page file of 10 MB. Many items in a PDF document only need to be saved once (such as font information, image information in some cases, etc.), so the change in size when adding additional pages is sometimes very small. At other times it can be very big, though. You can have a 100-page file that is 1 MB and then add a single page to it, with a new font perhaps, and the size will jump to 5 MB, just because that font is very large...

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I print a sheet of different address labels?

How do I print a sheet of different address labels?

I've just upgraded to Mountain Lion on my iMac. Here's what I've found.
To print labels, select the addresses you want to print using Contacts.
Go to File>Print. In the resulting dialog box, click on Show Details.
In the middle of the resulting box, click on Style and select 'labels'.
Just below the Style entry are Layout and Label. Select them in turn to choose
the details you want, including the type of label you'll use. I use the Avery 5160
and select it for the proper format.
Turn on your printer, insert a full sheet of labels and print.
Note: I have yet to figure out how to start printing on any label besides
number 1. Because of this problem, I don't use Contacts to print labels,
I usually use an old Palm program, now gone in Mountain Lion, or
pearLabelizer, a free program I got on the 'net.
Bob.

How to add different query results in Report designer

Hi,
I am creating a report based on 3 queries. At the end i need to show total of 3 query results.
How can i add results of queries in report designer??
thanks in advance

Hi Siva,
As u said that u want to show the results of the queries through report designer but i think it is used for formatted reports .
If u want to see tha results of diffrent query then u can use workbook .
In workbook u can also analyse reports easily by applying slice and dice techniques .
from different queries result set will be displayed on workbook with formatting and good look and feel.
regards,
Supriya

Printing multiple PR with different line items in smartform

Hello all,
I have an requirement to print multiple PR with different line items on different pages.
So,suppose two PR are there,PR1 and PR2 with n no of line items,then i should get each PR on different page with its line items.
Note: One loop processing is already there on line items.
Best Regards,
Anurodh

Hi,
Fetch all the PRs and its corresponding items into 2 different table. Then Loop at the internal whihc contains the PRs and call the 2nd internal table for its items and call the FM for smartforms and pass them.
LOOP AT it_PR.
fetch all the items into it_PR_item
Call Function Fnam
Passign the it_PR_item
ENDLOOP.
Regards,
Aditya

How do I add a print button that would print out pdf or different version than what is on the site?

I see this example on NY Times. If you pick any of their articles and click print or do the short cut (Command-P) ... (Control-P for windows), the layout of their article is completely customized and cleaner. It seems like they've edited the print look to be different than what you see on the website.
I find that very cool and something I've bent dying to achieve. My guess is that I could make a pdf to what I want the print look to be and have a print button read that instead of the website but I don't know, I need help with this.

I have but it's not what I'm looking for. I want to edit what the printer will actually print when a reader clicks print. So if the page has a puzzle, for example, and the reader clicks print. The printer will print the puzzle in a different location on the page without some of the clutter that's on the site or have some message that's not originally present on the website.

Error The PC and the printer are connected to different networks

Hi,
I'm trying to set up my C4580 on my laptop, but I'm getting the following error after the diagnostic test:
The PC and the printer are connected to different networks(237DB2A87D and 66616B65). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.
My setup is a Linksys router WRT546, my laptop is conntected wireless to the router. I have two other desktop computers that are directly connected to the router. Both the desktops are able to connect wireless to the printer. My router SSID name is 'Blair Office' with WPA security.
I get a internet connect fine with the laptop, but can't get the new printer to setup.
I saw another post that talked about 'Print the C45** Network Configuration Page', but not sure how to do this
Thanks
Diane

This reply may be late for this user, but it might be helpful for any current users.
I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
This worked for me after I read several other postings.
Good luck!

Can I have smart print eprint on two different computes with only account

Can I have smart print eprint on two different computers with only one account???

Are you talking about accessing an ePrint account from various computers? Or having HP Smart Print on multiple computers?
ePrint account information is kept at the site. You can log on it from anywhere, from any computer. Just go to the sire and click on Sign in and enter your password and email address. You can have multiple printers on one user account at ePrint Center (EPC). But printers can only be registered on ePrint Center to one user account. If you have an ePrint cable printer you can create an account at this link here.
HP Smart Print does not require an account you can download to an Internet Explorere browser (versions 6-9) and use it with no registration.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Different complining result between SUN JDK 1.4 and IBM JDK 1.3.1

Hi! I simplifed my code as following:
public class TestException2 {
    public Object test() {
        java.sql.Connection cn = null;
        try {
             // 1st. close
            cn.close();
        catch (java.sql.SQLException se) {
             // 2nd. close
            cn.close();
        finally {
            return new Object();
}But I get different compiling result betwueen SUN JDK 1.4.2 and IBM JDK 1.3.1 (I have to deploied my app to the websphere 5.0)
In Sun JDK 1.4.2, I only got a warning:
[e:\work\test]javac TestException2.java
TestException2.java:14: warning: finally clause cannot complete normally
        ^
1 warningIn IBM JDK 1.3.1, I got an error:
TestException2.java:10: unreported exception java.sql.SQLException; must be caught or declared to be
thrown
            cn.close();
              ^
1 errorWhat happend? Who is right?
Thank you!
[ I believe the code should not pass the compilation ... ]

Many other people agree with you, including some Sun engineers.
Perhaps Sun just feels an obligation to continue to allow it for legacy reasons.
You might also investigate the compiler that comes with Eclipse.
http://www.eclipse.org/
It has a more flexible approach: for some cases, it lets you decide what is a warning and what is an error.

How can we tell the printer to use a different paper cartridge

Hello all,
We are using t.code MN05 to assign a printer to each Purchase group. How can we tell the printer to use a different paper cartridge so that purchase orders ( output type ZNEU, ZEU, ZEN) can be printed on a paper with company logotype. Local team are removing most of the printers an we have only one multifunction printer availabel for a large number of employees.
Thank you for your suggestions

Hi,
I can help you about how to use different Paper Tray's but different cartridge case I am not sure...

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

is this a windows in bootcamp question ?

If a pdf file is written in indian language but prints off in a different language, what could be the issue?

if a pdf file is written in indian language but prints off in a different language, what could be the issue?

Most likely the issue is non-standard fonts. Are all used fonts embedded in the document?

Printing pages file makes different result.

I made pages file like this.
however, if i print it by pdf, the result is different like this.
if i print it on paper, the result is same with pdf one.
Do you have any idea?

It seems like that the subscript causes the problem....

Printing proofs w/ Pantone in CS4 vs CS5

Good days all,
I have found that our proof out came out with different.
The file was created in Illustrator CS4 and proceeded in CS5.
The file includes;
1. One PSD link file includes two pantone in channels
2. Blur effect for the drop shadow
3. general designed layout
EPS file was created base on above condition and sent to our RIP (ORIS) / Printed in Epson7900.
We have tried with embedded images and linked images but same printout.
Then we notify that the color proofs printed with somewhat different different pantone value.
the pantone color that originally created in PSD file has one pantone that not flat color but screened effect + another pantone with 100%.
We tried with opening Original CS4 file to create EPS file for printout and they are printing different pantone value.
Same pantone but different print out result.
My question is is there different pantone engine in CS4 vs CS5 when they print transparence + overprint effect?
what should be resolved to have the CS5 to become more like CS4 EPS output?
I hope I make myself clear on this.
Is anybody has similar problem?

We are not aware of any invalid PostScript being generated by InDesign 8 (CS6). However, from release to release of Adobe software, we definitely make changes in the generated PostScript (and similarly exported PDF and EPS) to account for new or updated features and to fix anomalies in previous releases.
It is possible that the Xerox FreeFlow VI Design Pro software is modifying the PostScript generated by InDesign (perhaps to merge variable data in some way?) and is doing so based upon pattern matching that works with the PostScript generated by InDesign 6 (CS4) but not with InDesign 8, yielding modified PostScript which is then rejected by whatever PostScript interpreter is ultimately processing that modified PostScript.
Your “mailing programmer” might want to contact Xerox to ascertain whether they may have an update to their software.
- Dov

Print proofing in CS2 - different to results

Similar Messages

Maybe you are looking for