Print queue stalling when spooling many documents

Hello all, need help with a peculiar issue.
We have just built a brand-new Server 2003 R2 SP2 x86 virtual server in VMWare. This server is also installed with the Subsystem for UNIX-based Applications components and a program called PrintMonitor that appears to be a bridge between a UNIX-based
application on UNIX server submitting print jobs to the Server 2003 R2 server.
The problem is that whether going through PrintMonitor or just into the standard Windows printing subsystem, the print queue for any of the 3 printers installed on the server will stall when a large number of documents are submitted. For example, if
15 small Notepad documents are printed to a printer, they will all queue, but after 11 print (this number appears to be consistent and repeatable), it can take anywhere from 45 seconds to 2 minutes for the rest to print.
I've already done a lot of searching on this issue and everything I read says that printing problems are most likely due to print drivers. Of the three printers, one is an HP 4000 series LaserJet and the other 2 are large Kyocera TASKalfa 8001i's.
The problem has manifested on all three printers, but so far we've only tried to remedy the problem on the HP. We've tried 4 alternate drivers and the problem persists. The HP PCL5 and PS drivers completely failed to work because it didn't
have correct paper parameters. The PCL6 driver behaved the same as the driver included in Windows. We've tried submitting through PrintMonitor and directly into Windows, but the problem persists there as well, which would seem to eliminate PrintMonitor
as the source of the problem.
Does anyone else have any suggestions on what we can try?

This is a very old issue due to the RFC and design of the lpr protocol. Can you not use Standard TCP/IP ports to the print devices rather than LPR ports?
Here's a doc comparing limitations in LPR and reasons to move to Standard TCP/IP Port monitor.
http://technet.microsoft.com/en-us/library/cc728404(v=WS.10).aspx
All the print devices you listed support Standard TCP/IP Ports.
If you really have to stick to LPR Port due to your PrintMonitor application, respond back or just search for: 721 lpr alan morris.
Alan Morris Windows Printing Team

Similar Messages

HP 8620 all-in-one: scanner becomes unavailable in print queue window when computer sleeps

I just bought a new printer/scanner/fax - HP 8620 all-in-one. I have Mac OSX 10.9.3 and the most up to date drivers/software from the HP website (april 2014). I have connected the printer via ethernet cable to our wireless router. I have installed as per intructions.
When my computer goes to sleep, or the printer goes to sleep, I will return to the computer to find that the "scanner" is not available (ie greyed out when I go to "open scanner" in the print queue or system preferences, or try to use "HP scan". I tried a few things, like uninstall/reinstalling, and have worked out that if I reboot my computer the scanner option seems to "whiten" again (ie become available).
Is there a way to prevent this happening???? I don't have time to be rebooting every time I need to use the scanner!

You can't use the scan button on the printer. You have to start the scan from OS X.
See this:
Mac Basics: Using a scanner
http://support.apple.com/kb/ht4505
Austin

Bizarre solution for OfficeJet Pro K5300 problem when Word docs hang in the print queue spooling

A bizarre solution to a spooling problem.
Problem:
Word documents sent to an HP Officejet Pro K5300 Series printer hang in the print queue, saying “spooling”. They do not print, and cannot even be cancelled.
Solution (Bizarre Solution).
The solution that worked for me was to rename the printer by removing the first space after “HP” in the printer’s name. When I did this, Word could then print to the printer. If the space is then re-inserted back into the printer-name then Word is still able to print!! I don’t know how, but it worked, and it worked on two separate installations! The full explanation is below with more options for testing that still need to be explored, or preferably explained by HP and or Microsoft.
First here is some background. My computer is an IBM NetVista 2.4GHz, P4. It has a 250GB HDD with lots of room and 2GB of RAM. My operating system is Win XP Pro with Service Pack 3. My anti-Virus in Trend Micro Internet Security 2009, updated regularly, (I turned it off while installing the printer software). I use Office Professional 97, with Office SP2b).
I bought a new HP Officejet Pro K5300 printer.
I installed the printer software, and followed HP’s directions strictly. I used the installation CD that was supplied by HP. My connection to the printer was USB.
The installation proceeded uneventfully and I printed a test page after it finished.
After that I printed a configuration page, then I printed a couple of photographs using Irfan View. The quality was great and I was pleased.
Then I tried to print a 2-page Word document, using Word 97, but nothing happened. No response from the printer, no error messages, just silence. I clicked on the printer icon on the task bar to look at the print queue and saw that my document was listed as “Spooling”, but it was not making any progress. I waited a couple of minutes but still no progress. I tried canceling it but it would not cancel/delete. The job on the queue would not respond to anything. I could not print it and I could not cancel it. The only way I could recover was to shut down Word, which flushed the queue and lost the job.
I tried this a few more times but with no success.
I did a Google search for this problem, and I found a few solutions. I tried them, but none worked. I checked HP’s website and found this problem listed, with some solutions from HP. I tried HP’s solutions, but they did not work either. In fact, when there was a Word document stuck “spooling” in the queue, HP’s diagnostic utility said that it could not even communicate with the printer, and suggested that my USB connection was bad. However, when I flushed the queue by shutting down Word, I could successfully send a Test Page to the printer, and I could print a detailed PDF from Adobe. So Word was the problem, not my USB connection.
After a pondering this problem over the next few days, and keeping in mind the fact that the default HP printer-name was “HP Officejet Pro K5300 Series”, I remembered that many years ago I could not get an Excel VB macro to select a printer, and print to it, if the printer-name had any spaces in it. I had noticed that the HP default printer name had 4 spaces in it, so I wondered what would happen if I renamed the printer by removing the spaces from its name.
So I renamed the printer to “HPOfficejetProK5300Series” (no spaces), and voila! Word could now print to it!
Then I wondered, if it was necessary to remove all of the spaces from the name, or just some of them, to get the printer to work, so I renamed the printer back to it’s default name in 4 stages, at each stage re-inserting one of the original spaces, and testing the printing. At each stage the printer kept successfully printing from Word, until I had re-inserted all four spaces and the printer’s name was back to being identical to the default name that it was installed with, but now it would print from Word on command.
So why was it that Word could not get the printer to print with the printer’s default installed name, but if I removed all of the spaces from the printer’s name, then re-inserted them, the printer would print from Word every time?
So I did another test.
I uninstalled the entire printer software package and installed the updated Full Feature software package, filename “OJProK5X00_Full_8_3.exe”, 159MB download from HP.
After the package was installed, Word could NOT print to the printer, but other programs like Adobe PDF reader, and Irfan View, could print to it. I tried each software package about three times each, with consistent results.
I then renamed the printer, but this time I just removed the first space after the letters “HP”, i.e., I changed the printer’s name from “HP Officejet Pro K5300 Series” to “HPOfficejet Pro K5300 Series”. After I did that Word could then print to it. I then changed the printer’s name back to “HP Officejet Pro K5300 Series” by re-inserting the first space, and Word could still print to it now.
I challenge someone from HP to read this and explain why Word won’t print to this printer until I rename the printer by removing a space, but can still print to it after the space is re-inserted!
Of course, there is another alternative. Perhaps I could have renamed the printer by removing or changing any of the other characters, instead of the spaces. But each test involves completely uninstalling and re-installing the software, and I have better things to do with my time.
This question was solved.
View Solution.

What an amazing solution!
I recently purchased an HP Deskjet F4580 and had discovered that when using Word 97, it would print OK when using the Print icon but when trying to print using File->Print->choose page number or current page, Word would crash. Excel, Adobe etc would all print fine. I have spend many hours removing and then reloading the HP software and Office Professional software but this solution fixed the problem in a few minutes. PC is running XP Home SP3.
Just one thing I would add is that my computer has two accounts - one is the Computer Administrator account and the other is a Limited account. When I took out the space between HP and Deskjet so the printer became HPDeskjet F4500 series, I could then print from the Administrator account using either the print icon or File->Print->choose page number or current page. When I switched to the Limited account, I would get the same crash when I tried File->Print->choose page number or current page (OK with icon). The Limited account mode does not allow the printer to be re-named.
I went back to Admin mode, re-classified the Limited account as a Computer Administrator account, logged on to this account and re-named the printer (in this case I took out another space so it became HPDeskjetF4500 series. Then it printed fine using the print icon or using File->Print->choose page number or current page. I then went back to the Computer Administrator account, re-named the printer to HPDeskjet F4500 and re-classified the second account back to Limited account mode. Now printing OK in both Computer Administrator account mode and Limited account mode.
Thanks again!

Spool requests are being sent the the B9 printer queue(RSNAST00).

Hi gurus,
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

Post Author: Stephen@Azzu
CA Forum: General
Nobody know the answer to this one? Stephen@Azzu:Here's a good one...I'm using Crysal Reports XI (fully service packed) and the reports I have created are being used in a VB.Net application. I have no problems whatsoever in printing the reports, everything is fine. However, when the report is sent to the printer, the printer queue displays 'document' as the, err, document name. I'd like it to say something more relevant, such as the document number the user selected.So I've tried setting the ReportDocument.Name but wait, it's read only!? How about the summary info? No change. Filename? No change either. I've browsed the internet, searched the knowledge base and found nothing. So my question is this...How do I get the printer queue to display an appropriate name for my document?Stephen

Spool requests are being sent the the B9 printer queue.

Hi gurus!
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

Clearing the print queue

While printing, the paper supply ran out but when I reloaded, it tells me the printer is out of paper. I've turned off the printer, tried to delete the current job but am still unable to print.
Thank you.

Hi - Have you rebooted the computer yet? I'd try that first. That should clear the print queue in case the previous document is still stuck int he print queue. If that doesn't take care of it, does the printer attempt to pickup paper or do you get any response from the printer when you send a file to print?
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Second Print Queue

Hello,
I have a PIXMA MP610, when connected via USM to my IMAC, it supports both printer and scanning and has a print queue. I know Airport Extreme doesn't support scanner. My question, will a second print queue be created as result of connecting my printer to my airport extreme?

You will need to create the second print queue on your Mac to support the network connection. The print queue for when the printer is connected directly to the USB port of the Mac will not work when you have the printer connected to the USB port of the Extreme.
So when you do move the printer to the Extreme USB port, simply open Print & Fax and select to Add. The MP610 should be visible in the Default Add Printer view with the Kind column showing Bonjour. Select this and the Print Using menu should automatically select the printer driver, or at least prompt you that it needs to download via Software Update. Once this has completed you will then have two print queues on the Mac.
Note that you may want to change the name for the network queue so that the printer is easy to identify from the print dialog. The renaming can be done by selecting the printer, opening Options & Supplies and selecting the General tab. Here you will have the ability to change the printers name and its location, although only the printer name is seen in an applications print dialog.

Print queue shows 24mb when pdf file is only 1mb. print hangs. jpeg prints normally. officejet 8500

Officejet 8500, Win SP ser 3. Wireless Network - Direct connection to Belkin ADSL Modem/Router
Previously worked normally.
Print PDF or some other documents. Print queue shows document size spooling 24 or more Mb when file is only 1 Mb.
Print takes a long time to come through.
Print JPEG - normal spooling and printing.
Have reinstalled all software and cleared printer by unplugging all cables.
This question was solved.
View Solution.

Hi,
That's very normal. Depending on many things, machine (laptop/PC) has to send many "commands" down to the printer therefore the file is getting huge.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to keep file name in print queue when printing crystal report

We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document. How to keep the original file name? In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
Thanks

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

When using Pages, I can't seem to print an envelope. I use file, then print, and see the printer icon come up in the dock showing it received the info but then quickly disappears and nothing gets printed. When I check the printer queue there is nothing

Bear with me, I've not done this before. I can't seem to reliably print an envelope when using Pages. I go to "file" click "print", click "ok", see the printer icon flash in the dock with a red "1" (indicating a printing job), but then the icon disappears and nothing gets printed. I checked the printers queue and there is nothing there. The funny thing is, after many times hitting "print", twice I've had envelopes printed. ??? What's the secret?

Have you tested it from other software, such as TextEdit to establish that it is in fact Pages that is the problem?
Step us through Print Setup... and what you select when you send it off to print.
Peter
From the
Brother MFC-6800 Printer's User Guide:
How Can I load envelopes:
You can load envelopes from the multi-purpose sheet feeder. Your appliaction software must be set up to print the envelope size you are using. This is usually done in the Page Setup or Document Setup mebnu of your software. Refer to your appliaction manual
It also mentions an issue with paper thickness.

Documents stuck in printer queue - Airport Extreme + Windows 7

Hi There,
I have a HP CP1215 Laserjet hooked up to my Airport Extreme and print to it from a Windows 7 (x64) machine.
Everything works fine in the sense that I can print documents and the quality is great, the problem is that the document remains in the 'printing' status in the windows queue forever more and the printer continues to print copy after copy of the document until I manually delete the job from the queue myself.
I also have a mac that uses the same printer (setup with the foo2hp drivers) which works fine so I'm thinking it must be a network/windows issue.
Any help would be gratefully received.
Many thanks,
Oliver

Please read this postthen provide some details. What printer model? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have a MacBook that when I try to print it stops the printer queue and it creates a PrintJobMgr.crash.log, I have a MacBook that when I try to print it stops the printer queue and it creates a PrintJobMgr.crash.log

I have a MacBook with the following configuration:
Model Name: MacBook
Model Identifier:           MacBook2,1
Processor Name:           Intel Core 2 Duo
Processor Speed:           2 GHz
Number Of Processors:               1
Total Number Of Cores:              2
L2 Cache (per processor):           4 MB
Memory:           1 GB
Bus Speed:       667 MHz
Boot ROM Version:       MB21.00A5.B07
SMC Version:   1.17f0
I have a LaserJet P1005 Printer
I can print the configuration page through the printer queue utility but when I try to print any other way even with txt editor the queue stops
when I check through console i get at the PrintJobMgr.crash.log the following:
===== Friday, 27 January 2012 01:12:02 Europe/London =====
Host Name:      MacBook
Date/Time:      2012-01-27 01:12:06.279 +0000
OS Version:     10.4.11 (Build 8S2167)
Report Version: 4
Command: PrintJobMgr
Path:    /System/Library/Printers/Libraries/PrintJobMgr/Contents/
MacOS/PrintJobMgr
Parent: cupsd [305]
Version: ??? (???)
PID:    442
Thread: 0
Exception: EXC_BAD_ACCESS (0x0001)
Codes:      KERN_PROTECTION_FAILURE (0x0002) at 0x0000029c
Thread 0 Crashed:
0   ...oftware2000.print.hp1006.pm 0x00378f89 operator delete(void*)
+ 43019
1   ...oftware2000.print.hp1006.pm 0x0031690d PMPluginFactory + 6441
2   ....printingmanager.jobmanager 0x00005a14 0x1000 + 18964
3   ....printingmanager.jobmanager 0x00006293 0x1000 + 21139
4   ....printingmanager.jobmanager 0x00007d0d 0x1000 + 27917
5   ....printingmanager.jobmanager 0x00003d05 0x1000 + 11525
6   ....printingmanager.jobmanager 0x0000258e 0x1000 + 5518
7   ....printingmanager.jobmanager 0x000024b5 0x1000 + 5301
Thread 1:
0   libSystem.B.dylib              0x900bbf6c sigwait + 12
1   libSystem.B.dylib              0x90023d67 _pthread_body + 84
Thread 2:
0   libSystem.B.dylib              0x901101cf
semaphore_timedwait_trap + 7
1   ...oftware2000.print.hp1006.pm 0x00318d4e PMPluginFactory + 15722
2   ...ple.CoreServices.CarbonCore 0x90cb8ce0 PrivateMPEntryPoint + 51
3   libSystem.B.dylib              0x90023d67 _pthread_body + 84
Thread 0 crashed with X86 Thread State (32-bit):
   eax: 0x00000001 ebx: 0x003162ea ecx: 0x00000036 edx: 0x00000000
   edi: 0x0042e5f0 esi: 0x000001fc ebp: 0xbfff79e8 esp: 0xbfff79e8
    ss: 0x0000001f efl: 0x00010206 eip: 0x00378f89   cs: 0x00000017
    ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000037
Binary Images Description:
     0x1000 -    0x13fff com.apple.printingmanager.jobmanager 4.6
(126.5)     /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/
PrintJobMgr
   0x205000 -   0x2e3fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
   0x313000 -   0x3b1fff com.software2000.print.hp1006.pm 1.0.6 (0)     /
Library/Printers/hp/laserjet/HP1006/HP1006PM.plugin/Contents/MacOS/
HP1006PM
   0x3cd000 -   0x3d0fff com.apple.print.iom.USB 4.6 (163.10)     /System/
Library/Printers/IOMs/USBIOM.plugin/Contents/MacOS/USBIOM
   0x3d5000 -   0x3d8fff
com.apple.print.usbgenericprintingclass.plugin 4.6 (163.10) /System/
Library/Printers/Libraries/USBGenericPrintingClass.plugin/Contents/
MacOS/USBGenericPrintingClass
   0x3dc000 -   0x3e4fff com.apple.iokit.IOUSBLib 2.7.5     /System/
Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/
Contents/MacOS/IOUSBLib
0x8fe00000 - 0x8fe4afff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x90171fff libSystem.B.dylib       /usr/lib/libSystem.B.dylib
0x901c1000 - 0x901c3fff libmathCommon.A.dylib   /usr/lib/system/
libmathCommon.A.dylib
0x901c5000 - 0x90202fff com.apple.CoreText 1.1.3 (???)      /System/
Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/CoreText.framework/Versions/A/CoreText
0x90229000 - 0x902fffff ATS   /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/
Versions/A/ATS
0x9031f000 - 0x90774fff com.apple.CoreGraphics 1.258.85 (???)     /System/
Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x9080b000 - 0x908d3fff com.apple.CoreFoundation 6.4.11 (368.35) /
System/Library/Frameworks/CoreFoundation.framework/Versions/A/
CoreFoundation
0x90911000 - 0x90911fff com.apple.CoreServices 10.4 (???)   /System/
Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x90913000 - 0x90a07fff libicucore.A.dylib      /usr/lib/libicucore.A.dylib
0x90a57000 - 0x90ad6fff libobjc.A.dylib   /usr/lib/libobjc.A.dylib
0x90aff000 - 0x90b63fff libstdc++.6.dylib       /usr/lib/libstdc++.6.dylib
0x90bd2000 - 0x90bd9fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
0x90bde000 - 0x90c51fff com.apple.framework.IOKit 1.4.8 (???)     /System/
Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x90c66000 - 0x90c78fff libauto.dylib     /usr/lib/libauto.dylib
0x90c7e000 - 0x90f24fff com.apple.CoreServices.CarbonCore 682.31
(682.32)    /System/Library/Frameworks/CoreServices.framework/Versions/A/
Frameworks/CarbonCore.framework/Versions/A/CarbonCore
0x90f67000 - 0x90fcffff com.apple.CoreServices.OSServices 4.1     /System/
Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/
OSServices.framework/Versions/A/OSServices
0x91008000 - 0x91047fff com.apple.CFNetwork 129.24    /System/Library/
Frameworks/CoreServices.framework/Versions/A/Frameworks/
CFNetwork.framework/Versions/A/CFNetwork
0x9105a000 - 0x9106afff com.apple.WebServices 1.1.3 (1.1.0) /System/
Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/
WebServicesCore.framework/Versions/A/WebServicesCore
0x91075000 - 0x910f4fff com.apple.SearchKit 1.0.8     /System/Library/
Frameworks/CoreServices.framework/Versions/A/Frameworks/
SearchKit.framework/Versions/A/SearchKit
0x9112e000 - 0x9114cfff com.apple.Metadata 10.4.4 (121.36) /System/
Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/
Metadata.framework/Versions/A/Metadata
0x91158000 - 0x91166fff libz.1.dylib      /usr/lib/libz.1.dylib
0x91169000 - 0x91308fff com.apple.security 4.5.2 (29774)    /System/
Library/Frameworks/Security.framework/Versions/A/Security
0x91406000 - 0x9140efff com.apple.DiskArbitration 2.1.2     /System/
Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x91415000 - 0x9141cfff libbsm.dylib      /usr/lib/libbsm.dylib
0x91420000 - 0x91446fff com.apple.SystemConfiguration 1.8.6 /System/
Library/Frameworks/SystemConfiguration.framework/Versions/A/
SystemConfiguration
0x91458000 - 0x914cefff com.apple.audio.CoreAudio 3.0.5     /System/
Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x9151f000 - 0x9151ffff com.apple.ApplicationServices 10.4 (???) /
System/Library/Frameworks/ApplicationServices.framework/Versions/A/
ApplicationServices
0x91521000 - 0x9154dfff com.apple.AE 316.3      /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/AE.framework/
Versions/A/AE
0x91560000 - 0x91634fff com.apple.ColorSync 4.4.13    /System/Library/
Frameworks/ApplicationServices.framework/Versions/A/Frameworks/
ColorSync.framework/Versions/A/ColorSync
0x9166f000 - 0x916e2fff com.apple.print.framework.PrintCore 4.6
(177.13)    /System/Library/Frameworks/ApplicationServices.framework/
Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore
0x91710000 - 0x917b9fff com.apple.QD 3.10.28 (???)    /System/Library/
Frameworks/ApplicationServices.framework/Versions/A/Frameworks/
QD.framework/Versions/A/QD
0x917df000 - 0x9182afff com.apple.HIServices 1.5.2 (???)    /System/
Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/HIServices.framework/Versions/A/HIServices
0x91849000 - 0x9185ffff com.apple.LangAnalysis 1.6.3 /System/Library/
Frameworks/ApplicationServices.framework/Versions/A/Frameworks/
LangAnalysis.framework/Versions/A/LangAnalysis
0x9186b000 - 0x91886fff com.apple.FindByContent 1.5   /System/Library/
Frameworks/ApplicationServices.framework/Versions/A/Frameworks/
FindByContent.framework/Versions/A/FindByContent
0x91891000 - 0x918cefff com.apple.LaunchServices 183.1      /System/
Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/LaunchServices.framework/Versions/A/LaunchServices
0x918e2000 - 0x918eefff com.apple.speech.synthesis.framework 3.5 /
System/Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x918f5000 - 0x91935fff com.apple.ImageIO.framework 1.5.9   /System/
Library/Frameworks/ApplicationServices.framework/Versions/A/
Frameworks/ImageIO.framework/Versions/A/ImageIO
0x91948000 - 0x919fafff libcrypto.0.9.7.dylib   /usr/lib/libcrypto.
0.9.7.dylib
0x91a40000 - 0x91a56fff libcups.2.dylib   /usr/lib/libcups.2.dylib
0x91a5b000 - 0x91a79fff libJPEG.dylib     /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libJPEG.dylib
0x91a7e000 - 0x91addfff libJP2.dylib      /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libJP2.dylib
0x91aef000 - 0x91af3fff libGIF.dylib      /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libGIF.dylib
0x91af5000 - 0x91b7dfff libRaw.dylib      /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libRaw.dylib
0x91b81000 - 0x91b9cfff libPng.dylib      /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libPng.dylib
0x91ba1000 - 0x91ba3fff libRadiance.dylib       /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libRadiance.dylib
0x91ca0000 - 0x91cdffff libTIFF.dylib     /System/Library/Frameworks/
ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/
Versions/A/Resources/libTIFF.dylib
0x91ce5000 - 0x91ce5fff com.apple.Accelerate 1.3.1 (Accelerate
1.3.1)      /System/Library/Frameworks/Accelerate.framework/Versions/A/
Accelerate
0x91ce7000 - 0x91d75fff com.apple.vImage 2.5    /System/Library/
Frameworks/Accelerate.framework/Versions/A/Frameworks/
vImage.framework/Versions/A/vImage
0x91d7c000 - 0x91d7cfff com.apple.Accelerate.vecLib 3.3.1 (vecLib
3.3.1)      /System/Library/Frameworks/Accelerate.framework/Versions/A/
Frameworks/vecLib.framework/Versions/A/vecLib
0x91d7e000 - 0x91dd7fff libvMisc.dylib    /System/Library/Frameworks/
Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/
A/libvMisc.dylib
0x91de0000 - 0x91e04fff libvDSP.dylib     /System/Library/Frameworks/
Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/
A/libvDSP.dylib
0x91e0c000 - 0x92215fff libBLAS.dylib     /System/Library/Frameworks/
Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/
A/libBLAS.dylib
0x9224f000 - 0x92603fff libLAPACK.dylib   /System/Library/Frameworks/
Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/
A/libLAPACK.dylib
0x92630000 - 0x9271dfff libiconv.2.dylib /usr/lib/libiconv.2.dylib
0x9271f000 - 0x9279dfff com.apple.DesktopServices 1.3.7     /System/
Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/
DesktopServicesPriv
0x927de000 - 0x92a16fff com.apple.Foundation 6.4.12 (567.42)      /System/
Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x92bc4000 - 0x92bc4fff com.apple.Carbon 10.4 (???)   /System/Library/
Frameworks/Carbon.framework/Versions/A/Carbon
0x92bc6000 - 0x92bd6fff com.apple.ImageCapture 3.0.4 /System/Library/
Frameworks/Carbon.framework/Versions/A/Frameworks/
ImageCapture.framework/Versions/A/ImageCapture
0x92be5000 - 0x92bedfff com.apple.speech.recognition.framework 3.6      /
System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
SpeechRecognition.framework/Versions/A/SpeechRecognition
0x92bf3000 - 0x92bf9fff com.apple.securityhi 2.0.1 (24742) /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
SecurityHI.framework/Versions/A/SecurityHI
0x92bff000 - 0x92c90fff com.apple.ink.framework 101.2.1 (71)      /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
Ink.framework/Versions/A/Ink
0x92ca4000 - 0x92ca8fff com.apple.help 1.0.3 (32.1)   /System/Library/
Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/
Versions/A/Help
0x92cab000 - 0x92cc9fff com.apple.openscripting 1.2.7 (???) /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
OpenScripting.framework/Versions/A/OpenScripting
0x92cdb000 - 0x92ce1fff com.apple.print.framework.Print 5.2 (192.4)     /
System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
Print.framework/Versions/A/Print
0x92ce7000 - 0x92d4afff com.apple.htmlrendering 66.1 (1.1.3)      /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
HTMLRendering.framework/Versions/A/HTMLRendering
0x92d71000 - 0x92db2fff com.apple.NavigationServices 3.4.4 (3.4.3)      /
System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
NavigationServices.framework/Versions/A/NavigationServices
0x92dd9000 - 0x92de7fff com.apple.audio.SoundManager 3.9.1 /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
CarbonSound.framework/Versions/A/CarbonSound
0x92dee000 - 0x92df3fff com.apple.CommonPanels 1.2.3 (73)   /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
CommonPanels.framework/Versions/A/CommonPanels
0x92df8000 - 0x930edfff com.apple.HIToolbox 1.4.10 (???)    /System/
Library/Frameworks/Carbon.framework/Versions/A/Frameworks/
HIToolbox.framework/Versions/A/HIToolbox
Any Ideas?
Thanks,
George Govotsis

I have the same printer, P1005, and hae been using it with Tiger (PPC), Leopard (PPC and intel), snow Leopard and Lion. What I do know is that it DOES HAVE print bugs in Tiger and, perhaps, Leopard, I had to ALWAYS manually delete print jobs after EVERY print as system did not clean memory. I reported this to Apple, but it seems to be a printer driver issue, unsolved by HP. It was solved in subsequent systems. So, my suggestion is to upgrade to Snow Leopard at least, as you have a core 2 duo 2006 MB, or directly to Lion as most recent, and best fit with printer drivers. You must put at least 2 GB of memory for SL and Lion, best is 4 GB (your model may support 3 GB only if the first core 2 duo series).
Until then, clean printing system by clicking minus button in sys prefs/print.
download last HP printer driver for Tiger,check with their site
install driver or reinstall, even if installed
put printer back again
If it continues to behave as described, then you must delete every print job after completion or upgrade to at least SL. Many say SL is best for that generation, me included. But you must not share this opinion, of course.

Document in print queue wont delete

i was printing of a document when my F2290 all in one printer ran out of ink since i replaced with new cartridges the last document in the print queue wont resume printing and it wont delete either and its not letting me print of any other documents. ive turned it off and removed all cables from pc but still no luck its really doing my head in and need help

Hi Ranch_hand,
I am sorry to hear that you are having problem getting print jobs to print. I will do my best to help you get printing again. Follow the steps in this document for Can't Print?. Just choose the Windows Vista link to get to the steps.
I hope this helps. Let me know.
Thank you,
I worked on behalf of HP.

Change "document" to report title in print queue

Post Author: mroy
CA Forum: .NET
When printing from Crystal Reports to a printer, in the print queue, the Document Name is "Crystal Reports - " and the report title.
When printing using ReportDocument in Visual Basic .NET program to a printer, the Document name is "document".
Is there a way to change "document" to the report title in code?

Post Author: Argan
CA Forum: .NET
You can only do it using RAS I believe by using the PrintReportOptions objects JobTitle property.
This is only available using Enterprise or CR XI R2 SP2.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RAS_SDK/rassdk_com_doc/doc/rassdk_com_doc/Crystal_Reports_Controllers_Library101.html
Jason

HP 1505n - Print Jobs stop when sent to queue

I recently purchased an HP LaserJet 1505n for my home office. I have several Mac's all running 10.5.1 all connecting to it. Most print to it via the network (Bonjour) but I do have 1 Mac hooked up directly via USB to the printer. So, both the USB And Network Interfaces are being used on the printer (which is why I bought it).
Every now and then when I try to print, the print job just stops immediately in the queue. When I try to restart it, it stops again. Sometimes physically resetting the printer works, but rarely. I have also deleted the queues and re-added them. Nothing seems to work. It seem that Adobe Acrobat files never print, but Firefox will always. (Strange...)
I have read a few other threads on this issue and they all mention that it is a driver issue from HP. I have try to get the OpenSource drivers, but I have not found any for the HP 1505n.
Below is the /var/log/cups/error_log. Does anyone have any suggestions or recommendations? Do I just wait for an OpenSource driver or HP to update their drivers?
Thanks!
-Rob
E [16/Jan/2008:22:07:47 -0800] CUPS-Add-Modify-Printer: Unauthorized
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n device-uri to "file:///dev/null" (was "file:/dev/null".)
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-is-accepting-jobs to 1 (was 0.)
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-state to 3 (was 5.)
I [16/Jan/2008:22:07:47 -0800] Saving printers.conf...
I [16/Jan/2008:22:07:47 -0800] New printer "HPLaserJetP1505n" added by "rneumann".
I [16/Jan/2008:22:07:47 -0800] Setting HPLaserJetP1505n printer-is-shared to 1 (was 1.)
I [16/Jan/2008:22:07:47 -0800] Saving printers.conf...
I [16/Jan/2008:22:07:47 -0800] Printer "HPLaserJetP1505n" modified by "rneumann".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding start banner page "none".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding job file of type application/postscript.
I [16/Jan/2008:22:08:02 -0800] [Job 2] Adding end banner page "none".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Queued on "HPLaserJetP1505n" by "rneumann".
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /usr/libexec/cups/filter/pstoappleps (PID 812)
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 813)
I [16/Jan/2008:22:08:02 -0800] [Job 2] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 814)
E [16/Jan/2008:22:08:07 -0800] PID 814 (/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr) crashed on signal 8!
I [16/Jan/2008:22:08:07 -0800] Hint: Try setting the LogLevel to "debug" to find out more.
E [16/Jan/2008:22:08:07 -0800] [Job 2] Job stopped due to filter errors.
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding start banner page "none".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding job file of type application/pdf.
I [16/Jan/2008:22:09:13 -0800] [Job 3] Adding end banner page "none".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Queued on "HPLaserJetP1505n" by "rneumann".
I [16/Jan/2008:22:09:13 -0800] [Job 3] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 833)
I [16/Jan/2008:22:09:22 -0800] [Job 3] Completed successfully.

This is what I got from HP...need to grab CVs and Libraries Folder from a PowerPC mac.
and...it works!
Intel Mac fix for Office 2004
1. On a computer that can still print using Office 2004, go to HD>System>Library>Printers and control+click on Libraries and Create Archive. In the same location, control+click on the CVs folder and Create Archive. Save these Archived (zip) folders to the Desktop.
2. Copy these two Archived (zip) folders to the Intel Mac that cannot print. *note – you will need a network connection to the computer or a flash drive.
3. Make sure you quit all applications including Safari, Entourage etc.
4. Create a New Folder on the Desktop of the Intel Mac (Name this folder “Backup of Libraries and CVs”)
5. Open the Macintosh HD>System>Library folder and control+click on the Printers folder and select Get Info. Click on Name & Location and set the permissions for Everyone to Read & Write.
6. Open the Printers folder and drag the Libraries and CVs folder to the new folder you had just created to backup the old files.
7. Extract the Archived Libraries and CVs folder you have copied to the Intel Mac by double clicking on the folders.
8. Copy the extracted Libraries and CVs folders to the Printers folder (You will be asked to authenticate the copy)
9. Restart the Computer.
10. Open Disk Utility and select your Macintosh HD Volume. Select Repair Permissions.
11. Open a MS Office document and print to verify the issue is resolved.
Message was edited by: mobious74

Print queue stalling when spooling many documents

Similar Messages

Maybe you are looking for