Print report does not work in built mode (LV7.1+XP)

Good morning,
I've read some threads about the topic in this Q, but no solution. So my hope is that NI has resolved the problem. Here it goes:
In normal edit mode I can use the Print Report.vi (using the default win printer) to print out some data. The generated report is a standard NI report (that is NOT HTML).
When building an application this no longer works. No data is passed to windows (the printer icon in the system tray never appears) - and hence no output on the printer!
I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet but I've also tried using the old stable Canon LBP 8 II on the FILE: port - but in .exe mode the file box does not appear.
I really hope that NI has a solution
for the problem since we need the built application on several client. And we do not want to pay for several LV licenses.
Speculations on both the application builder and report generation tools have been given in previous threads... However, these gave no solution and all threads are from before LV7.1.
Thanks in advance!
Martin

Skinny wrote:
> In normal edit mode I can use the Print Report.vi (using the default
> win printer) to print out some data. The generated report is a
> standard NI report (that is NOT HTML).
>
> When building an application this no longer works. No data is passed
> to windows (the printer icon in the system tray never appears) - and
> hence no output on the printer!
>
> I use WinXP and LV7.1 in both modes. The printer is a HP2300 LaserJet
> but I've also tried using the old stable Canon LBP 8 II on the FILE:
> port - but in .exe mode the file box does not appear.
>
> I really hope that NI has a solution for the problem since we need the
> built application on several client. And we do not want to pay for
> several LV licenses.
Are you sure you checked the "NI R
eport Support" under the Advanced
button of the Installer tab in the application builder?
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

BPC75NW: Offline Distribution of reports does not work in Schedule mode

Hello BPC experts,
I'm new in SAP world.
I have the following problem.
In BPC 7.50.06 NW I'm trying to adjust the distribution on e-mail to schedule.
I set up Distribution List. When I start the Offline Distribution Wizard -> Distribute Now all works without problems.
The problem starts when I start the Offline Distribution Wizard in the Schedule mode. All the settings I do the same as at "Distribute Now".
Then I set the report should be sent daily, starting with 13.10.2011, indicating the Start Time. As a System password I'm pointing my domain password (I know no other passwords).
At the time specified in the Start Time nothing happens, i.e. the schedule does not work.
Tell me, please, if faced with a similar problem, how it can be solved?
Thank you for your help, this is greatly appreciated.
Regards,
Todoshi Takato

Moved to .NET SDK forum.
Search here, lots of post on IIS and setting Printer Access Permissions for your application.
Also search MSDN on what is required to for IIS to access local Printers.
Also search for ActiveX Controls and Browser permissions, you'll likely have problems there also since most Browsers will not or do not recommend allowing any ActiveX control.
Don

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Ipad 2 Print button does not work after 6 upgrade?

Since we upgraded to iOS6, our print button does not work and does not find our printer. It was working fine until iOS6. Called an Apple Technician and he had me reset, which wiped out all of my saved information but didn't fix the print. He then started talking about a restore but the phone line went dead. Has anyone had this problem?

Today's iOS 6.1 update fixed the printer problem.

The print tab does not work in mapquest

The print tab does not work in mapquest

You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Print queue does not work

Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
5) Also the verification of the temporary files find no problems.
In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

Finger print reader does not work

i followed the directions and my print was scanned, rescanned,and the edges were scanned and accepted but the reader does not react when the phone is locked....i deleated and rescanned and followed all directions which accepted my finger print....once again thereader does not unlock the phone...any suggestions?

I looked for software and found a suggestion which I down loaded. Now the finger print reader does not work either on Internet Explorer or on Firefox. So I had to do a reset to an early time to get rid of that soft ware. We are back to where I started, with the finger print reader working fine on Explorer 11 and it does not work at all on FireFox. There must be some work around, has this not occurred with other folks.

How come when I try to print from my iPad for example Tim Horton's WiFi to mu home Airprint printer it does not work.

How come when I try to print from my iPad for example Tim Horton's WiFi to mu home Airprint printer it does not work.

The Airprint printer must be on the same local network (LAN) for Airprint to work. You cannot print to your home printer using the WiFi at Tim Horton's.
See: http://support.apple.com/kb/ht4356

Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Validataion does not work in batch mode

Hello community,
We created an FI line item validation for transaction FBV1 that does a validation on a field and displays an error message if the validation fails. We have an RFC that uploads data from an Excel template and runs a BDC Call Transaction to upload and park the document. This worked well when we were on 4.6C but when we upgraded to ECC6.0, the Validation works fine when we manually call the FBV1 in SAP and the Validation DOES get triggered and displays a message if the line item validation fails but when we run FBV1 in batch mode, (RFC which contains a call transaction to FBV1) the validation does not work.
I set up break a point in the generated program GBTBOFID where the exception error gets triggered and traced the FI Validation. The program will not display the error Validation message when run in batch but when run online, the error message gets triggered.

Thanks for the prompt reply. I tryied a combination of the following options and did not have much luck with this one.
Data: x_options type ctu_params.
     clear X_OPTIONS.
     X_OPTIONS-DISMODE = 'A'.
     X_OPTIONS-UPDMODE = 'S'.
     X_OPTIONS-CATTMODE = ' '.
     X_OPTIONS-DEFSIZE = ' '.
     X_OPTIONS-RACOMMIT = ' '.
     X_OPTIONS-NOBINPT = ' '.
     X_OPTIONS-NOBIEND = 'X'.
CALL TRANSACTION 'FBV1' USING bdcdata options from X_OPTIONS
After the call transaction the program automatically triggers some SAP generated code for a Validation check for FBV1 line item that we have put in through IMG. The message that should be displayed is in the FI validation check of FBV1.
I put a break point in the SAP generated code for the Validation where the message should be displayed. The program executes the statement that should raise the exception and display the message. As soon as the statement is executed, conrol returns to the the the SAP transaction FBV1 program and the program continues to finish.
The statement that executes and does not display the error message is:
CASE valsevere.
        WHEN 'A'.
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4
                  RAISING abend_message.
        WHEN 'E'.    <=== *This option is true and the progam steps
                    " through the following message but does not display it.*
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4
                  RAISING errormessage.
        WHEN OTHERS.
          MESSAGE ID msg_id    TYPE valsevere   NUMBER msg_nr
                  WITH msgv1 msgv2 msgv3 msgv4.
      ENDCASE.
I should mention that in debug mode, I check the values of msg_id, msg_nr, msgv1 etc. and they all have values of a message class that we have created.
The above code is in a SAP generated program for FI Validation (GBTBOFI0, include FGBB100R).
-- We only have this issue when we use the FBV1 transaction in batch mode. Runing FBV1 directly online works fine.
-- The issue is unique to ECC 6.0 environemnt. We did not have this problem in 4.6C
Suggestions greatly appreciated.
Edited by: Rob Burbank on Jan 20, 2010 12:15 PM

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time                        3600
abap/cache_area                             10000000
abap/buffersize                             1500000
login/system_client                         100
INSTANCE_NAME                               DVEBMGS00
SAPSYSTEM                                   00
rdisp/wp_no_dia                             10
rdisp/wp_no_btc                             6
rdisp/wp_no_vb                              2
rdisp/wp_no_vb2                             1
rdisp/wp_no_enq                             1
rdisp/wp_no_spo                             1
DIR_TRANS                                   /usr/sap/trans
ms/server_port_<xx>                          PROT=HTTP, PORT=8080
icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME                                 /oracle/BWD/920_64
ipc/shm_psize_10                            104000000
ipc/shm_psize_14                            0
ipc/shm_psize_18                            0
ipc/shm_psize_19                            0
ipc/shm_psize_30                            0
ipc/shm_psize_40                            114000000
ipc/shm_psize_41                            0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

GUI JAVA 7.20 rev.2 (on Mac OSX 10.6.3): Print preview does not work!

I've just started using rev 2 of java sapgui and print preview is not working anymore.
Client: OSX 10.6.3
SAP: ERP5.0 on WAS 640
Has anyone experienced the same problem?

This is the output in console when print-previewing:
I'm going to open a support message as adviced.
<code>
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]     Exception in thread "Loader for htmlViewer8_XZ_7" java.lang.NullPointerException
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.updateColors(FrogListUI.java:63)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.propertyChange(FrogListUI.java:48)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:318)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.awt.Component.firePropertyChange(Component.java:8233)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.firePropertyChange(JComponent.java:4428)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.setEnabled(JComponent.java:2638)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.setEnabled(ActionsPanel.java:418)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.<init>(ActionsPanel.java:106)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.setGUI(AnnotationPanel.java:128)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.<init>(AnnotationPanel.java:73)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildAnnotationPanel(SwingViewBuilder.java:1574)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityTabbedPane(SwingViewBuilder.java:1541)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityAndDocumentSplitPane(SwingViewBuilder.java:1501)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildContents(SwingViewBuilder.java:499)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildViewerPanel(SwingViewBuilder.java:482)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.pilots.pdf.ThePilot.createComponent(ThePilot.java:149)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.setPilot(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.append(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_clear_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_render_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.runAsynchronousLoad(VCDO)
</code>
Edited by: Lorenzo Nicora on May 4, 2010 10:52 AM

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

Print report does not work in built mode (LV7.1+XP)

Similar Messages

Maybe you are looking for